Speed Unlimited 600C TFT Display User Manual

Gabatarwa

This manual provides detailed instructions for the installation, operation, maintenance, and troubleshooting of the HALLOMOTOR Speed Unlimited 600C TFT Display. This advanced display is designed to seamlessly integrate with various Bafang mid-drive motors, including M200, M300, M400, M410, M420, M500, M560, M510, M600, M620, M800, and M820 models. It utilizes CAN protocol for reliable communication and offers a vibrant TFT screen for clear data monitoring and customizable settings.

Samfurin Ƙarsheview

HALLOMOTOR 600C TFT Display with CAN Protocol

Hoto 1: Gaba view of the HALLOMOTOR 600C TFT Display, showing the screen and control buttons.

HALLOMOTOR 600C TFT Display compatible motors

Figure 2: The 600C TFT Display, highlighting its CAN version and compatibility with Bafang M200, M300, M400, M410, M420, M500, M510, M560, M600, M620, M800, and M820 motors.

HALLOMOTOR 600C TFT Display mounted on handlebars

Figure 3: The 600C TFT Display mounted on bicycle handlebars, demonstrating its 2.4-inch HD screen, multi-language support, multi-mode interface, and IP65 waterproof rating.

HALLOMOTOR 600C TFT Display installed on an e-bike

Figure 4: An installed view of the 600C TFT Display on an electric bicycle, showing its compact design and handlebar mounting.

Saita da Shigarwa

1. Abubuwan Kunshin

600C TFT Display Unit
Mounting Bracket (integrated)
Cable Haɗi

2. Shigar da Nuni

The 600C TFT Display is designed for handlebar mounting. Ensure the handlebar diameter is compatible with the integrated clamp (approximately Ø22.2mm as per dimensions). Position the display centrally for optimal viewshigarwa da samun damar shiga maɓallan.

Loosen the mounting screw on the display's integrated clamp.
Place the display on your bicycle's handlebar in the desired position.
Tighten the mounting screw securely, ensuring the display is stable and does not rotate freely. Do not overtighten.

Figure 5: Technical dimensions of the 600C TFT Display, showing measurements in millimeters for width, height, and handlebar clamp diameter (Ø22.2mm).

3. Haɗin Lantarki

Connect the display's cable to the corresponding port on your Bafang mid-drive motor system. Ensure the connectors are clean and dry before mating. The display uses a specific CAN protocol connector (often green, as shown in product images).

Locate the display connection port on your Bafang motor's wiring harness.
Align the male and female connectors of the display cable and the motor harness.
Push firmly until the connectors click into place, ensuring a secure and waterproof seal.
Route the cable neatly along the handlebars and frame, securing it with cable ties to prevent snagging or damage.

Umarnin Aiki

1. Display Layout and Buttons

The 600C TFT display features a clear screen and intuitive button layout for easy control.

Power Button (middle): Yana kunna/kashe tsarin nuni da tsarin keken lantarki.
Up Button (+): Increases assist level, navigates menus upwards, or increases values.
Down Button (-): Decreases assist level, navigates menus downwards, or decreases values.
M Button (Mode): Cycles through display information, enters/exits settings menus.

2. Basic Aiki

Kunnawa/Kashewa: Press and hold the Power button for approximately 2 seconds to turn the system on or off.
Changing Assist Levels: Use the Up (+) and Down (-) buttons to adjust the motor's pedal assist level. The current level will be displayed on the screen.
Cycling Display Information: Press the M button briefly to cycle through various data displays such as speed (current, average, max), distance (trip, total), battery level, and power output.

3. Advanced Settings and Interface Modes

The 600C display supports multiple interface modes and customizable settings. Refer to the on-screen menu for specific options.

HALLOMOTOR 600C TFT Display multiple interface modes

Hoto na 6: Examples of multiple interface modes available on the 600C TFT Display, including digital, simulation, basic information, and detailed information views.

Shiga Saituna: Typically, pressing and holding the M button, or a combination of buttons, will enter the settings menu. Follow the on-screen prompts.
Keɓancewa: Within the settings, you may be able to adjust parameters such as wheel diameter, speed unit (km/h or mph), battery voltage, backlight brightness, and password protection.
Hanyoyin Sadarwa: The display offers various visual layouts for data presentation. Navigate to the 'Interface Mode' setting to select your preferred view.

Kulawa

Tsaftacewa: The display is IP65 waterproof. Use a soft, damp cloth to wipe the screen and casing. Avoid abrasive cleaners or solvents. Do not use high-pressure water jets directly on the display.
Ajiya: When not in use for extended periods, store the display and e-bike in a cool, dry place, away from direct sunlight and extreme temperatures.
Duban Kebul: Periodically check the display cable and connectors for any signs of wear, damage, or corrosion. Ensure connections remain secure.

Shirya matsala

Matsala	Dalili mai yiwuwa	Magani
Nuni baya kunnawa.	Low battery, loose connection, system fault.	Check e-bike battery charge. Ensure all cables are securely connected. If problem persists, consult a technician.
No speed or distance data.	Speed sensor issue, loose motor connection.	Check speed sensor alignment and connection. Verify motor connection.
Nuni yana nuna lambar kuskure.	Rashin aiki na tsarin	Note the error code and refer to your motor's manual or contact support for specific meaning and resolution.
Buttons ba su da amsa.	Temporary software glitch, physical damage.	Try restarting the display (power off and on). Inspect buttons for physical damage.

Ƙayyadaddun bayanai

Sunan Samfura: 600C TFT display with CAN protocol
Alamar: HALLOMOTOR
Nau'in Nuni: TFT (Thin-Film Transistor)
Girman allo: 2.4-inch (HD display screen)
Ladabi: CAN (Controller Area Network)
Daidaituwa: Bafang Mid Drive Motors (M200, M300, M400, M410, M420, M500, M560, M510, M600, M620, M800, M820)
Abu: Filastik
Launi: Baki
Nau'in hawa: Handlebar Mount (Ø22.2mm)
Ƙididdiga mai hana ruwa: IP65
Abubuwan da aka haɗa: LCD 600C CAN

Garanti da Taimako

Bayanin Garanti

This product comes with a limited warranty. For specific details regarding warranty coverage, duration, and terms, please refer to the documentation provided with your purchase or contact HALLOMOTOR directly. Keep your proof of purchase for warranty claims.

Tallafin Abokin Ciniki

If you encounter any issues not covered in this manual or require further assistance, please contact the seller or HALLOMOTOR customer support. Provide your product model number and a detailed description of the issue for efficient service.

	Bafang E-bike Drive Systems da Kayan Aikin Aiki 2023 Cikakken littafin aikin da ke ba da cikakken bayani game da kewayon Bafang na tsarin tuƙi na e-bike, injina, batura, HMIs, masu sarrafawa, na'urori masu auna firikwensin, da na'urorin haɗi don aikace-aikace daban-daban ciki har da eMTB, eRoad, eTour, eCity, eCargo, da eFAT. Yana fasalta ƙayyadaddun fasaha, bayanin dacewa, da kayan aikin sabis.
	Panasonic EYFCA1WC: Haɗin Mai Gudanarwa da Jagorar Kanfigareshan Wannan daftarin aiki yana ba da cikakkun bayanai game da haɗa mai sarrafa Panasonic zuwa na'urorin waje ta hanyar buɗaɗɗen yarjejeniya, mai da hankali kan siga da aikin batch. Hakanan ya ƙunshi daidaitawa don wuraren samun damar waje, ƙayyadaddun fasaha don ƙirar EYFCA1WC, da lambobin kuskuren matsala.
	Leader Fox Electric Bicycle Operating Instructions and Manual Comprehensive operating instructions, specifications, and troubleshooting guide for Leader Fox electric bicycles, focusing on the Lucas model and Bafang M420 electric set.
	Bafang Display User Manual and Guide This guide provides detailed information on operating and understanding the Bafang display control panel for electric bicycles, covering features like lighting control, support modes, walk assist, trip data, and display symbols.
	TSDZ2 Central Motor Drive System Installation Manual Comprehensive installation guide for the YOSE POWER TSDZ2 Central Motor Drive System, detailing the steps for motor, display, and speed sensor installation, system connection, and parts list.
	Leader Fox Electric Bicycle Operating Instructions Comprehensive operating instructions for Leader Fox electric bicycles, covering setup, usage, maintenance, and troubleshooting. Includes details on the e-bike system, battery care, LCD display functions, and controller settings.

HALLOMOTOR 600C TFT display with CAN protocol