1. Samfurin Ya Ƙareview
The Hormann FIT 2-1 BS Push Button is a 2-button wireless transmitter designed for controlling automated systems. It operates at a frequency of 868.35 MHz and utilizes BiSecur technology for secure communication. This device allows for the control of two different motorizations or two distinct functions on the same automated system. It is intended exclusively for indoor use in a dry environment.
The push button is easy to install and is powered by two 1.5V LR03/AAA batteries, which are included. The package also contains an installation manual and mounting accessories to facilitate setup.
Hoto 1: Gaba view of the Hormann FIT 2-1 BS Wireless Push Button, showing the two control buttons.
2. Bayanan fasaha
| Alamar | Hormann |
| Maganar Samfura | 4511695 |
| Girma (L x W x H) | 80 x 80 x 36 mm |
| Yawanci | 868.35 MHz |
| Adadin Maɓalli | 2 |
| Yawan Tashoshi | 2 |
| Tushen wutan lantarki | 2 x 1.5V LR03/AAA batteries (included) |
| Nauyi | 0.2 kg (90 grams according to specifications) |
| Ƙimar Muhalli | IP 20 (Indoor use only) |
3. Daidaituwa
The Hormann FIT 2-1 BS is compatible with Hormann motorizations that utilize BiSecur technology. It is also retro-compatible with older 868 MHz fixed code motorizations.
Compatible motorizations include:
- SupraMatic
- ProMatic
- RotaMatic
- LineaMatic
- VersaMatic
It can also be used with key switches such as:
- Farashin 40
- Farashin 40
- Mataki na 40
- STUP 40
- Mataki na 50
- STUP 50
Important: Verify compatibility with your existing motorizations before installation.
4. Saita da Shigarwa
The Hormann FIT 2-1 BS push button is designed for easy installation. It comes with all necessary mounting accessories.
4.1. Cire kaya da dubawa na farko
- Carefully unpack the push button and all accessories.
- Ensure all components listed in the packaging are present.
- Bincika na'urar don kowane lalacewa da ke gani.
4.2. Shigar da Baturi
The device is powered by two 1.5V LR03/AAA batteries. These are typically pre-installed or included separately.
- Locate the battery compartment, usually on the back or side of the unit.
- Bude murfin daki.
- Insert the two LR03/AAA batteries, ensuring correct polarity (+/-).
- Rufe murfin ɗakin baturi amintacce.
Hoto 2: Gefe view of the push button, indicating the location of the battery compartment.
4.3. Mounting the Push Button
The push button must be installed in a dry, indoor environment.
- Choose a suitable indoor location for mounting, ensuring it is dry and easily accessible.
- Use the provided mounting accessories (screws, wall plugs) to securely attach the push button to the wall.
- Ensure the device is firmly fixed and does not wobble.
4.4. Programming the Buttons
The programming procedure links the push button to your Hormann motorization(s).
- Refer to the detailed programming instructions provided in the included manual.
- Typically, this involves activating a programming mode on your motorization unit and then pressing the desired button on the FIT 2-1 BS push button.
- Repeat the process for the second button if you wish to control another motorization or function.
- Test the functionality after programming to ensure successful pairing.
5. Umarnin Aiki
Once programmed, operating the Hormann FIT 2-1 BS is straightforward.
- Danna maɓallin maɓalli na sama to activate the first programmed function or motorization (e.g., open/close garage door).
- Danna maɓallin maɓallin ƙasa to activate the second programmed function or motorization (e.g., partial opening, light control).
- The device transmits a secure BiSecur signal to your receiver.
Hoto 3: Angled view of the push button, highlighting the two distinct control surfaces.
6. Kulawa
The Hormann FIT 2-1 BS requires minimal maintenance to ensure reliable operation.
6.1. Tsaftacewa
- Wipe the surface of the push button with a soft, dry cloth.
- Kada a yi amfani da masu tsabtace abrasive, masu kaushi, ko sinadarai masu tsauri, saboda waɗannan na iya lalata casing.
6.2. Madadin Baturi
When the batteries are low, the device's indicator light (if present) may flash or its range may decrease. Replace batteries as follows:
- Bude sashin baturi kamar yadda aka bayyana a Sashe 4.2.
- Remove the old 1.5V LR03/AAA batteries.
- Insert new 1.5V LR03/AAA batteries, observing correct polarity.
- Zubar da tsoffin batura bisa ga ƙa'idodin gida.
7. Shirya matsala
If the push button is not functioning as expected, consider the following:
- No response from motorization:
- Duba ko an saka batirin daidai kuma bai ƙare ba. A sake maye gurbinsa idan ya cancanta.
- Ensure the push button is within the operating range of the motorization's receiver.
- Verify that the push button is correctly programmed to the motorization. Refer to the programming instructions.
- Check for any obstructions between the push button and the receiver that might block the signal.
- Aiki na wucin gadi:
- Wannan na iya nuna ƙarancin ƙarfin baturi. Sauya batura.
- Ensure there is no significant radio interference in the area.
- Push button not mounting securely:
- Ensure you are using appropriate screws and wall plugs for your wall type.
- Avoid over-tightening screws, which can damage the casing.
If problems persist after following these steps, consult the full product manual or contact Hormann customer support.
8. Bayanin Tsaro da Gargaɗi
- The push button must be installed exclusively in a dry, indoor environment. Do not expose it to moisture, rain, or extreme temperatures.
- Kar a bude na'urar casing beyond the battery compartment, except for authorized service personnel.
- A kiyaye batura daga wurin yara. Idan an haɗiye, nemi kulawar likita nan da nan.
- Ensure proper disposal of used batteries according to local environmental regulations.
- Wannan na'urar ba abin wasa bane. Nisantar yara.
- Always ensure the area around the motorization is clear before operating to prevent injury or damage.
Hoto 4: Gefe view of the push button, illustrating its compact design and potential security indicators.
9. Garanti Bayani
Specific warranty details for the Hormann FIT 2-1 BS Wireless Push Button are not provided in the product description. Please refer to the warranty card included with your purchase or contact your retailer for information regarding warranty terms and conditions.
10. Tallafawa da Tuntuɓa
Contact information for direct customer support is not provided in the product description. For technical assistance, troubleshooting, or further inquiries, please refer to the official Hormann website or contact the retailer from whom you purchased the product.
