Gabatarwa
This manual provides detailed instructions for the safe installation, operation, and maintenance of your BESTTEN 3-Way Decorator Wall Light Switch. Please read all instructions carefully before beginning installation and retain this manual for future reference. This switch is designed for use in both single-pole and 3-way circuits, allowing control of a light fixture from one or two locations.
Hoto: Overview of BESTTEN 3-Way Decorator Wall Light Switches with included wallplates.
Bayanin Tsaro
WARNING: RISK OF ELECTRIC SHOCK. IMPROPER INSTALLATION CAN RESULT IN SERIOUS INJURY OR DEATH.
- Always turn off power at the circuit breaker or fuse box before wiring.
- Verify power is off before proceeding with installation.
- Shigar daidai da duk lambobin lantarki na ƙasa da na gida.
- Idan bakada tabbas game da kowane bangare daga cikin wadannan umarnin, sai ka tuntubi kwararren masanin lantarki.
- Do not use with loads exceeding the specified ratings (15A, 120V/277V).
- An yi nufin wannan na'urar don amfanin cikin gida kawai.
Abubuwan Kunshin
- BESTTEN 3-Way Decorator Wall Light Switch(es)
- Matching Decorator Wallplate(s)
- Hawan Haɗawa
Ƙayyadaddun bayanai
| Ƙayyadaddun bayanai | Daraja |
|---|---|
| Lambar Samfura | USP-LS03-10PK |
| Yanayin Aiki | KYAUTA |
| Ƙididdiga na Yanzu | 15 Amps |
| Mai aiki Voltage | 120V / 277V |
| Nau'in Tuntuɓi | Kulawa |
| Nau'in Haɗawa | Dunƙule |
| Tasha | Dunƙule |
| Nau'in kewayawa | 3-way (also compatible with Single Pole) |
| Nau'in Actuator | Rocker |
| Girman samfur | 2.91 x 4.69 x 1.28 inci |
| Kayan abu | Impact-resistant polycarbonate thermoplastic and solid steel |
| Takaddun shaida | UL da aka lissafa |
Image: Physical dimensions of the switch and wallplate.
Saita da Shigarwa
Before beginning, ensure the power is OFF at the circuit breaker. This switch can be used for both single-pole and 3-way applications.
Wiring Terminals Overview
Image: Detailed back view of the switch illustrating screw and push-in terminals.
- Black Screw: Connects to the Hot/Line wire or the Hot/Load wire.
- Brass Screws: Connect to the Traveler wires in a 3-way circuit.
- Green Screw: Connects to the Ground wire.
- Quick Push-in Terminals: Accept 14 AWG solid copper wire only. Terminal screws accept up to 12 AWG.
3-Way Circuit Wiring Diagram
A 3-way switch allows control of a single light fixture from two different locations. This setup requires two 3-way switches.
Image: Standard 3-way wiring configuration.
- Kashe Wuta: Locate the circuit breaker controlling the switch and turn it OFF. Verify power is off using a voltage gwajin.
- Gane Wayoyi: In a 3-way setup, you will typically find a Hot/Line wire, a Hot/Load wire, two Traveler wires, and a Ground wire. Label them if necessary.
- Haɗa Wayar Ƙasa: Connect the bare copper or green insulated ground wire from the wall box to the green ground screw on the switch.
- Connect Traveler Wires: Connect the two traveler wires to the two brass screws on the switch. Ensure consistency between both 3-way switches (e.g., if one traveler is connected to the top brass screw on the first switch, connect it to the top brass screw on the second switch).
- Connect Hot/Line or Hot/Load Wire: Connect the Hot/Line wire (from the power source) to the black screw on the first 3-way switch. Connect the Hot/Load wire (going to the light fixture) to the black screw on the second 3-way switch.
- Secure Switch: Carefully fold the wires into the electrical box. Mount the switch to the box using the provided screws.
- Shigar da Bangon Bango: Attach the decorator wallplate over the switch.
- Dawo da Power: Kunna wutar lantarki a wurin na'urar busar da wutar lantarki.
Single Pole Circuit Wiring
For single-pole applications, the switch controls a light fixture from one location. Connect the Hot/Line wire to one black screw and the Hot/Load wire to the other black screw. Connect the ground wire to the green screw. The brass screws are not used in a single-pole configuration.
Umarnin Aiki
The BESTTEN 3-Way Decorator Wall Light Switch features a simple rocker paddle for operation.
- Press the top of the paddle to turn the connected light fixture ON.
- Press the bottom of the paddle to turn the connected light fixture OFF.
Image: Switch installed in a room, demonstrating its aesthetic integration.
Kulawa
- Tsaftacewa: To clean the switch and wallplate, wipe with a soft, damp Zane. Kada a yi amfani da masu tsaftace goge-goge ko masu narkewa. A tabbatar an kashe wutar lantarki kafin a tsaftace.
- Dubawa: Periodically inspect the switch and wallplate for any signs of damage or wear. If damage is observed, turn off power and replace the switch.
Shirya matsala
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| Light does not turn ON/OFF | No power to the switch | Duba na'urar yanke wutar lantarki (circuit breaker) sannan ka tabbatar tana kunne. |
| Waya mara kyau ko mara kyau | Turn off power. Recheck all wire connections according to the wiring diagram. Ensure wires are securely fastened to terminals. | |
| Kuskuren kwan fitila | Sauya kwan fitila. | |
| Switch feels loose in the wall box | Mounting screws are not tightened | Turn off power. Tighten the mounting screws that secure the switch to the electrical box. |
| Wallplate does not fit correctly | Switch not properly aligned or incorrect wallplate | Ensure the switch is centered and flush within the electrical box. Verify you are using the correct decorator-style wallplate. |
Garanti da Taimako
BESTTEN products are manufactured to high-quality standards. For warranty information or technical support, please refer to the contact information provided with your purchase or visit the official BESTTEN website.
For additional product information or to explore other BESTTEN electrical solutions, please visit the BESTTEN Store on Amazon.
