1. Muhimman Umarnin Tsaro
Always observe the following safety precautions when operating the Einhell TC-RH 1600 rotary hammer drill to prevent electric shock, injury, and fire. Keep these instructions for future reference.
Gabaɗaya Tsaron Kayan Aikin Wuta
- Tsaron Yankin Aiki: Kiyaye yankin aikinku tsabta da haske sosai. Wurare masu duhu ko duhu suna kiran haɗari. Kada a yi amfani da kayan aikin wuta a cikin abubuwan fashewa, kamar a gaban ruwa mai ƙonewa, gas, ko ƙura.
- Tsaron Wutar Lantarki: Dole ne toshewar kayan aikin wutar lantarki ta dace da wurin fitar da wutar lantarki. Kada a taɓa gyara toshewar ta kowace hanya. A guji taɓa jiki da saman ƙasa ko na ƙasa kamar bututu, radiators, range, da firiji.
- Tsaro na Keɓaɓɓen: Always wear eye protection, hearing protection, and a dust mask. Dress properly; avoid loose clothing or jewelry. Secure long hair. Stay alert, watch what you are doing, and use common sense.
- Amfani da Kulawa: Kar a tilasta kayan aikin wutar lantarki. Yi amfani da madaidaicin kayan aikin wuta don aikace-aikacenku. Cire haɗin filogi daga tushen wutar lantarki kafin yin kowane gyare-gyare, canza kayan haɗi, ko adana kayan aikin wuta.
Rotary Hammer Specific Safety
- Saka masu kare kunne when impact drilling. Exposure to noise can cause hearing loss.
- Use auxiliary handles supplied with the tool. Loss of control can result in personal injury.
- Riƙe kayan aikin wuta ta wuraren da aka keɓe lokacin yin aiki inda na'urar yankan zata iya tuntuɓar ɓoyayyun wayoyi ko igiyar kanta.
- Tsare kayan aikin. Yi amfani da clamps or a vise to hold the workpiece. This is safer than using your hand and it frees both hands to operate the tool.
- Beware of dust. Drilling or chiseling concrete and masonry can create dust containing silica, which can cause respiratory diseases. Use dust extraction and wear a suitable dust mask.
2. Samfurin Ya Ƙareview and Included Items
The Einhell TC-RH 1600 is a powerful rotary hammer drill designed for drilling, impact drilling, and chiseling in concrete, masonry, and other tough materials. It features an SDS-plus chuck for quick tool changes and a robust pneumatic impact mechanism.
Image 2.1: The Einhell TC-RH 1600 rotary hammer drill shown with its robust carrying case. The drill features a red and black housing with an auxiliary handle attached.
Abubuwan Haɗe da:
- Einhell TC-RH 1600 Rotary Hammer Drill
- Hannun taimako
- Tsaya Zurfi
- Harkar Dauka
- 7-piece SDS-plus Drill Bit Set (2x 6mm, 2x 8mm, 10mm, 12mm, 14mm)
Image 2.2: A 7-piece SDS-plus drill bit set, including various diameters for concrete and reinforced concrete applications. The bits feature carbide tips for durability.
3. Bayanan fasaha
| Siffar | Ƙayyadaddun bayanai |
|---|---|
| Samfura | Farashin TC-RH1600 |
| Shigar da Wuta | 1600 W |
| Voltage | 240 V |
| Tasirin Makamashi | 4 J |
| Nau'in Chuck | SDS- da |
| Ayyuka | Drilling, Impact Drilling, Chiseling (with/without lock) |
| Siffar Tsaro | Overload safety clutch |
| Tasirin Tasirin | Cutar huhu |
| Sarrafa Gudu | Electronic speed adjustment |
| Jijjiga Damping | Jijjiga-damped main handle |
| Gidajen Gear | Aluminum mai ƙarfi |
4. Saita
4.1 Haɗa Hannun Taimako
The auxiliary handle provides better control and safety during operation. Loosen the auxiliary handle by turning it counter-clockwise. Slide it over the chuck and position it to your desired angle. Tighten it securely by turning clockwise.
4.2 Inserting/Removing SDS-plus Tools
- Tsaftacewa: Clean the shank of the SDS-plus tool and apply a thin layer of grease.
- Sakawa: Push the tool into the SDS-plus chuck while rotating it slightly until it locks into place. Pull the tool to check if it is securely seated.
- Cire: Pull back the locking sleeve on the chuck and pull the tool out.
Lura: The SDS-plus system allows for axial movement of the tool, which is normal and necessary for the impact mechanism.
4.3 Saita Tasha Mai Zurfi
Insert the depth stop into the designated hole on the auxiliary handle. Adjust the depth stop to the desired drilling depth by sliding it in or out. Secure it by tightening the auxiliary handle.
5. Umarnin Aiki
5.1 Zaɓi Yanayin Aiki
The TC-RH 1600 offers four functions, selected via a rotary switch:
- Hakowa: For drilling in wood, metal, or plastic without impact.
- Impact Drilling: Don hakowa a cikin kankare, masonry, da dutse tare da tasiri.
- Chiseling (with lock): For chiseling applications where the chisel position needs to be fixed.
- Chiseling (without lock): For chiseling applications allowing free rotation of the chisel for easier positioning.
Tsanaki: Always ensure the tool is unplugged before changing the operating mode.
5.2 Farawa da Dakatar da Kayan Aiki
- Don Fara: Danna maɓallin ON/KASHE.
- Don Tsayawa: Release the ON/OFF switch. For continuous operation, press the ON/OFF switch and then the lock-on button. To release, press the ON/OFF switch again.
5.3 Sarrafa Gaggawa
The tool features electronic speed control. The speed can be adjusted by varying the pressure on the ON/OFF switch. Lighter pressure results in lower speed, while full pressure provides maximum speed. This allows for fine adjustment during delicate work.
6. Kulawa da Tsaftacewa
Regular maintenance ensures the longevity and optimal performance of your Einhell TC-RH 1600 rotary hammer drill. Always unplug the tool from the power supply before performing any maintenance or cleaning.
6.1 Gabaɗaya Tsabtace
- Keep all safety devices, air vents, and the motor housing free of dirt and dust. Wipe the tool with a clean cloth.
- Do not use aggressive cleaning agents or solvents, as these can damage plastic parts.
- Clean the SDS-plus chuck regularly and apply a thin layer of grease to the moving parts to ensure smooth operation.
6.2 Carbon Brush Inspection
The carbon brushes are subject to wear. If the motor sparks excessively or the tool stops working, the carbon brushes may need inspection or replacement. This should ideally be performed by a qualified technician.
6.3 Adana
Store the tool and its accessories in the provided carrying case in a dry, frost-free place, out of reach of children. Ensure the tool is clean before storage.
7. Shirya matsala
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| Kayan aiki baya farawa. | Babu wutar lantarki; makullin da ya lalace; gogaggen carbon da ya lalace. | Check power connection; have switch or carbon brushes checked by a qualified technician. |
| Low impact power. | Incorrect operating mode; worn impact mechanism. | Ensure correct mode (impact drilling/chiseling) is selected; contact service for inspection. |
| Yawan girgiza. | Damaged accessory; internal fault. | Check accessory for damage and replace if necessary; contact service. |
| Kayan aiki yayi zafi sosai. | Overloading; blocked ventilation slots. | Reduce load; clean ventilation slots; allow tool to cool down. |
For problems not listed here or if solutions do not resolve the issue, please contact Einhell customer service or an authorized service center.
8. Garanti da Tallafawa
Einhell products are manufactured with care and undergo strict quality controls. This product is covered by a manufacturer's warranty in accordance with country-specific regulations. Please retain your proof of purchase for any warranty claims.
For technical support, spare parts, or warranty inquiries, please contact your local Einhell service center or visit the official Einhell website don bayanin lamba.
Albarkatun Kan layi: www.einhell.com
