BBLD 9301-1E

BBLD 1/18 Scale RC Car (Model 9301-1E) Instruction Manual

1. Gabatarwa

This manual provides comprehensive instructions for the safe and effective operation, maintenance, and troubleshooting of your BBLD 1/18 Scale RC Car, Model 9301-1E. Please read this manual thoroughly before operating the vehicle to ensure optimal performance and longevity.

2. Abin da ke cikin Akwatin

Your BBLD RC Car package includes the following items:

BBLD 1/18 Scale RC Car and included accessories

Image: The BBLD 1/18 Scale RC Car, remote control, two batteries, USB charging cable, and various tools included in the package.

3. Samfurin Ya Ƙareview

The BBLD 1/18 Scale RC Car is an IPX4 waterproof 4X4 off-road truck designed for various terrains. It features a robust RC380 brushed motor and a 2.4GHz anti-interference remote control system.

Mabuɗin fasali:

BBLD RC Car demonstrating high speed on a dirt track

Image: The BBLD RC Car in action, highlighting its speed capability of 40KM/H.

BBLD RC Car with two batteries, illustrating 45 minutes of playtime

Image: The BBLD RC Car with two batteries, emphasizing the extended playtime of 45 minutes.

BBLD RC Car remote control with labeled functions

Image: The 2.4GHz remote control system for the BBLD RC Car, showing controls for forward, brake, backward, steering, steering trim, speed switch, and indicator light.

BBLD RC Car with off-road tires on various terrains

Image: The BBLD RC Car showcasing its off-road tires designed for diverse terrains including snow and mud.

BBLD RC Car components including lights, shell, motor, shock absorbers, bearings, and tires

Hoto: Dalla-dalla view of the BBLD RC Car's components: cool car lights, environmental PVC car shell, long-lasting and powerful motor, adjustable shock absorber, 15-grain bearing, and 69mm all-terrain rubber tire.

BBLD RC Car dimensions and accessories

Image: The BBLD RC Car with its dimensions (11.42in/290mm length, 7.68in/195mm width, 5.12in/130mm height) and a list of included accessories.

Bidiyoyin Samfuri na hukuma:

Bidiyo: A takaice preview nuniasing the BBLD Remote Control Car's ability to conquer various terrains and its off-road performance, including driving through water.

Video: A brief demonstration of the BBLD RC Truck's features and capabilities.

4. Saita

Battery Installation (Vehicle)

  1. Remove the four body clips located on each corner of the car's shell.
  2. Carefully lift the car's shell to expose the internal components.
  3. Connect the red battery connector from the battery to the corresponding red connector on the vehicle's internal wiring. Ensure a secure connection.
  4. Secure the battery using the hook-and-loop strap provided in the battery compartment.
  5. Replace the car's shell and re-insert the four body clips.

Shigar da Baturi (Ikon nesa)

  1. Bude murfin sashin batir a bayan wutan lantarki.
  2. Saka batura 4 x AA (ba a haɗa su ba) a cikin ɗakin, don tabbatar da daidaiton polarity.
  3. Rufe murfin ɗakin baturi.

Cajin Batura

  1. Connect the white plug from the battery to the USB charging cable.
  2. Plug the USB charging cable into a 5V/0.5-2.0A USB adapter (e.g., computer USB port, USB wall adapter).
  3. The indicator light on the USB charger will show charging status (e.g., red for charging, green for fully charged).
  4. Charging typically takes approximately 1.5 hours per battery.

Pairing the Remote Control and Vehicle

  1. Ensure the vehicle's battery is connected and secured.
  2. Kunna na'urar sarrafawa ta nesa ta hanyar danna maɓallin wuta da riƙewa har sai hasken nuni ya haskaka.
  3. Turn on the vehicle by sliding the ON/OFF switch located inside the chassis.
  4. The remote control and vehicle will automatically pair. The indicator lights on the transmitter and ESC should flash during binding and remain solid on the ESC after successful binding.

5. Umarnin Aiki

Familiarize yourself with the remote control functions before operating the vehicle.

Ayyukan Ikon nesa:

Tuƙi Tuki:

6. Kulawa

Gabaɗaya Kulawa:

Kulawar Baturi:

Battery Charging Safety Instructions for BBLD RC Car

Image: Important safety instructions for battery charging, including warnings against unattended charging, damaged chargers, and improper battery handling.

7. Shirya matsala

Koma zuwa tebur mai zuwa don batutuwan gama gari da mafitarsu:

MatsalaDalili mai yiwuwaMagani
Vehicle Stop WorkingCar battery is flat or damagedFully charge the battery pack. If charging does not work, use a new battery. Check if there is a problem with the charging cable. If so, replace it with a new one.
Ba a shigar da batura masu nisa daidai baCheck and confirm that the battery is installed properly.
Vehicle is not connected with transmitterCheck to ensure that the transmitter and car are connected. The LEDs on the transmitter and ESC should flash during binding and remain solid on the ESC after binding.
Kariyar zafi fiye da kimaIf the vehicle body is driven at high temperatures for a long time, it may turn on the protection and cut off the power to avoid the risk of overheating and damage to the motor. Take out the vehicle battery and wait for it to cool down completely and fully recharge.
Parts damagedCheck for damaged parts such as wires, connectors, motors, ESCs, axles, etc. Repair or replace if necessary.
Vehicle works, but has poor or no steeringCar battery is flat or damagedFully charge the battery pack. Or replace it if needed.
Steering trim not properly setAdjust the 'ST. TRIM' on the transmitter to check whether the tires can be steered.
Parts loose or damagedCheck if the steering linkage is loose/broken or if the servo is faulty.
Incapable of connection / Short control rangeCar/transmitter battery is flat or damagedCheck and fully charge the battery pack, or replace it if needed.
Nisan sarrafawa yayi tsayi da yawaCheck to be within signal transmission distance.
Tsangwamar siginaStop driving and try to operate the vehicle in a new area. If the problem persists, contact the after-sales service.
Short Life LifeOld/worn-out batteryLook for swelling, deformation, edge damage. Replace with new battery.
Baturi bai cika caji baEnsure proper charging following battery charging guidelines.
Constant high-speed/rapid accelerationAvoid sustained high speeds and sudden acceleration to extend battery life.
Sluggish PerformanceDirty or damaged drivetrain/suspensionInspect and replace any broken gears, shafts, outdrive cups, suspension components, etc.
Baturi Baya CajinAn yi amfani da adaftan da ba daidai baOnly use 5V/0.5-2.0A adapter. Incorrect adapter may damage battery/charger.
Over-discharged or damaged batteryCheck battery pack condition and replace if needed.
Damaged USB chargerCheck USB cable/charger following charging instructions and replace if needed.
Vehicle Does Not ReverseƘananan baturiEnsure battery is fully charged before operating.
Incorrect throttle center point setupTurn power off/on without moving trigger until the vehicle is bound with the transmitter to allow ESC/Receiver's auto-setup of the throttle center point.
Incorrect trigger operationCenter trigger first, then pull back to go in reverse, to allow ESC/Receiver's auto-setup of the throttle center point.
Damaged waterproof ESC/Receiver or transmitterReplace the waterproof ESC/Receiver unit or transmitter.

8. Ƙayyadaddun bayanai

9. Bayanin Tsaro

10. Garanti da Tallafawa

Your BBLD RC Car comes with a 12-month extended warranty. For any technical support, missing parts, or warranty claims, please contact BBLD US directly through their official channels or the Amazon seller support page.

Takardu masu alaƙa - 9301-1E

Preview Team Associated RC8B4.1e 1:8 Scale Electric Off-Road Competition Buggy Assembly Manual
This is the assembly manual for the Team Associated RC8B4.1e, a 1:8 scale 4WD electric off-road competition buggy kit. It provides detailed, step-by-step instructions, parts lists, and helpful tips for building the model.
Preview Siemens GMA..1 Air Damper Actuators: Technical Datasheet
Detailed technical specifications, functions, and ordering information for Siemens GMA..1 series rotary air damper actuators. Covers two-position, three-position, and modulating control types with spring return functionality, suitable for HVAC applications.
Preview VRX-1E 1/8 Scale 4WD Brushless Shirye-shirye don Gudu da Jagoran Umarnin Truggy
Cikakken jagorar koyarwa don Sikelin 4WD Brushless Shirye-Don Gudu Truggy, fasali mai rufewa, bayanan fasaha, matakan tsaro, sarrafa baturi, caji, ajiya, da lissafin sassa.
Preview Carisma MSA-1E Suzuki Jimny JB74 1/24 Scale Crawler User Manual & Setup Guide
Cikakken jagorar mai amfani da jagorar saiti don Carisma MSA-1E 1/24 Scale Crawler, mai nuna jikin Suzuki Jimny JB74. Ya haɗa da umarnin saitin, matakan tsaro, gano sassa, da ƙayyadaddun fasaha.
Preview Siemens Actuators Mounting Instructions
Mounting instructions for Siemens Actuators, including wiring diagrams and technical specifications for models G..A161.1E/MO, G..B161.1E/MO, GEB161.1E/MO, and GIB161.1E/MO.
Preview Siemens OpenAir™ VAV Compact Controller KNX/PL-Link G..B181.1E/KN Basics Technical
Takaddun fasaha don Siemens OpenAir ™ VAV m masu sarrafa (KNX/PL-Link G..B181.1E/KN), rufe kayan yau da kullun na na'ura, shigarwa, injiniyanci, ƙaddamarwa, da ƙayyadaddun fasaha don gina tsarin sarrafa kansa.