Insoma 2-Zone Sprinkler Timer

Gabatarwa

The Insoma 2-Zone Sprinkler Timer is a programmable device designed to automate watering for your lawn, garden, and drip systems. It features independent control for two zones, allowing for customized watering schedules to optimize water usage and promote plant health. This manual provides detailed instructions for the setup, operation, and maintenance of your new sprinkler timer.

Figure 1: Insoma 2-Zone Sprinkler Timer main unit with digital display and control dial.

Mabuɗin Siffofin

• 2 Independent Watering Zones: Customize schedules for different areas.
• Jadawalin Shirye-shiryen: Set start times, watering duration (1 minute to 23h 59mins), and frequency (1 hour to 7 days).
• 3 Manual Watering Modes: Temporarily water Zone 1, Zone 2, or both without altering preset schedules.
• Rain Delay Mode: Pause watering for 1 to 7 days to conserve water during rainy periods.
• Zane Mai Tsari: Reinforced nylon connector, metal filter, 3 sealing gaskets, and thread-sealing tape ensure durability and prevent leaks.
• Low Battery Alert & Child Lock: Visual warning for low battery with automatic valve closure, and a child lock feature to prevent accidental program changes.
• Sauƙin Shigarwa: 360° rotatable interface, clear LED display, and compatibility with standard 3/4" or 1/2" garden hoses.
• IPX5 Mai hana ruwa: Designed to withstand everyday outdoor use.

Figure 2: Visual representation of the timer's key features and design elements.

Abubuwan Kunshin

• Insoma 2-Zone Sprinkler Timer Unit
• Manual mai amfani
• Karfe Tace
• Sealing Gaskets (3x)
• Thread-Sealing Tape
• 1/2" Quick Hose Fittings (2x)

Note: 2 AA 1.5V alkaline batteries are required and not included.

Figure 3: The sprinkler timer unit and its accompanying accessories.

Saita

1. Shigar da Baturi

1. Nemo ɗakin batirin a bayan na'urar ƙidayar lokaci.
2. Cire murfin baturin.
3. Insert two (2) new AA 1.5V alkaline batteries, ensuring correct polarity.
4. Replace the battery cover, ensuring the sealing rubber ring is properly seated to maintain waterproof integrity.

2. Haɗe zuwa Faucet

1. Ensure the faucet is turned off.
2. Thread the timer's inlet connector onto your outdoor faucet. The 360° rotatable interface allows for easy positioning.
3. Tighten securely by hand. For optimal leak prevention, ensure the metal filter and a sealing gasket are in place within the inlet.

3. Haɗa Hoses

1. Connect your garden hoses to the Zone 1 and Zone 2 outlets at the bottom of the timer.
2. If using 1/2" hoses, attach the provided quick hose fittings first.
3. For a secure, leak-free connection, apply thread-sealing tape to the hose threads before attaching them to the timer outlets.
4. Turn on your outdoor faucet. The timer is designed to handle water pressure from 7.25psi to 116psi.

Video 1: Detailed guide on installing the 2-Zone Sprinkler Timer, including battery insertion, faucet attachment, and hose connections.

Umarnin Aiki

The timer features a large, clear LED display and an intuitive dial for programming. Rotate the dial to select the desired setting, then use the '+' and '-' buttons to adjust values, and 'OK' to confirm.

1. Saitin Agogon

1. Turn the dial to 'Set Clock'.
2. Use '+' and '-' to set the current hour, then press 'OK'.
3. Use '+' and '-' to set the current minute, then press 'OK'.

2. Setting Start Time (PROG)

You can set up to 3 programs (P1, P2, P3) for each zone.

1. Turn the dial to 'PROG'.
2. Use the 'Zone' button to select Zone 1 or Zone 2.
3. Use '+' and '-' to set the desired start hour for P1, then press 'OK'.
4. Use '+' and '-' to set the desired start minute for P1, then press 'OK'.
5. Repeat for P2 and P3 if needed.

3. Setting Watering Duration ('How Long')

1. Turn the dial to 'How Long'.
2. Use the 'Zone' button to select Zone 1 or Zone 2.
3. Use '+' and '-' to set the desired watering duration in hours, then press 'OK'.
4. Use '+' and '-' to set the desired watering duration in minutes, then press 'OK'. (Duration can be set from 1 minute to 23 hours 59 minutes).

4. Setting Watering Frequency ('How Often')

1. Turn the dial to 'How Often'.
2. Use the 'Zone' button to select Zone 1 or Zone 2.
3. Use '+' and '-' to set the desired frequency (e.g., every 1 hour, every 24 hours, or every 7 days), then press 'OK'.

Hoto na 4: Example of setting watering duration and frequency in Hour Cycle Mode.

Hoto na 5: Example of setting watering duration and frequency in Day Cycle Mode.

Video 2: Step-by-step instructions on how to program the water timer, including setting the clock, start times, duration, and frequency.

5. Yanayin atomatik

After setting all desired programs, turn the dial to 'AUTO'. The timer will now operate automatically according to your programmed schedules for both zones.

6. Manual Watering Mode

This mode allows for temporary watering without affecting your preset schedules.

1. Turn the dial to 'AUTO'.
2. Press the 'OK/Manual' button.
3. Use the 'Zone' button to select Zone 1, Zone 2, or both.
4. Use '+' and '-' to set the desired manual watering duration (1-59 minutes), then press 'OK'. Water will flow for the set duration and then stop.
5. To stop manual watering early, press 'OK/Manual' again.

Figure 6: Manual watering in progress, demonstrating flexibility for immediate watering needs.

7. Rain Delay Mode

To prevent overwatering during rainy weather, you can pause your watering schedule.

1. Turn the dial to 'AUTO'.
2. Press and hold the '+' button for 3-5 seconds. The display will show 'D' for delay.
3. Use '+' and '-' to select the desired delay duration (1-7 days), then press 'OK'.
4. The timer will pause for the selected duration and then resume its normal schedule.
5. To cancel the rain delay, press and hold the '+' button again for 3-5 seconds.

Figure 7: The timer unit during a rain delay, indicating water conservation.

8. Kulle Yara

The child lock feature prevents accidental changes to your programmed settings.

1. Turn the dial to 'AUTO'.
2. Press and hold the '-' button for 3-5 seconds to activate the child lock. A lock icon will appear on the display.
3. To deactivate, press and hold the '-' button again for 3-5 seconds. The lock icon will disappear.

Kulawa

1. Ƙaramar Faɗakarwar Baturi

When the battery level is low, the screen will flash a warning. If the battery is critically low, the valve will automatically close to prevent continuous water flow and waste. Replace batteries promptly when the alert appears.

Figure 8: The timer display indicating a low battery status and automatic valve shutdown.

2. Tace Tsabta

The timer includes a metal filter at the inlet to prevent impurities from entering the system. Periodically inspect and clean the filter to ensure optimal water flow and prevent damage to the internal solenoids.

3. Lokacin hunturu

During winter months or when temperatures are expected to drop below freezing, it is recommended to disconnect the timer from the faucet and store it indoors in a dry, frost-free location. This prevents potential damage from freezing water.

Shirya matsala

• Babu Gudun Ruwa: Check if the faucet is fully open. Ensure batteries are not low or depleted. Verify that the program is set to 'AUTO' and a watering schedule is active.
• Leaks a Connections: Ensure all connections are tightened securely. Check for proper placement of sealing gaskets and apply thread-sealing tape if necessary. Inspect hoses for damage.
• Lokacin Ruwa mara daidai: Re-check your 'Set Clock', 'Start Time', 'How Long', and 'How Often' settings for each zone. Ensure the timer is in 'AUTO' mode.
• Nuni Baya Aiki: Replace batteries. If the issue persists, contact customer service.

Ƙayyadaddun bayanai

• Alamar: Insoma
• Lambar Samfura: SGW06M-N
• Girman samfur: 2.7 x 4 x 4 inches (0.47 Kilograms)
• Nauyin Abu: 1.04 fam
• Launi: Baki
• Rawan Ruwan Ruwa: 7.25 zuwa 116 psi
• Tsawon Ruwa: Minti 1 zuwa awanni 23 mintuna 59
• Tushen wutar lantarki: 2 x AA 1.5V Alkaline Batteries (not included)
• Ƙididdiga mai hana ruwa: IPX5

Garanti & Taimako

The Insoma 2-Zone Sprinkler Timer comes with a Garanti na watanni 12. If you have any questions, concerns, or require assistance with your watering timer, please do not hesitate to contact our customer service team. We are dedicated to providing reliable support for all your watering needs.