1. Gabatarwa
This manual provides instructions for the installation and operation of your BN-LINK CP-UWLD28 Dimmer Light Switch. This dimmer switch is designed for single-pole applications and requires a neutral wire for proper functionality. It supports dimmable LED, CFL, and incandescent light bulbs, offering two distinct dimming modes and a memory function to recall your last brightness setting.
2. Abin da ke cikin Akwatin
- 1x Dimmer Light Switch
- 1x Wall Plate
- 4x Waya Kwayoyin
- 2x Dogon Dunƙule
- 2x Short Screws
- 1 x Manual mai amfani (wannan takarda)
Image: The package contents, including the dimmer switch, wall plate, wire nuts, and mounting screws.
3. Ƙayyadaddun bayanai
| Siffar | Daki-daki |
|---|---|
| Yanayin Aiki | KYAUTA |
| Ƙididdiga na Yanzu | 3 Amps |
| Mai aiki Voltage | 125 Volts |
| Na'urori masu jituwa | Dimmable LED (3W-150W), CFL (3W-150W), Incandescent (3W-400W) |
| Nau'in sarrafawa | Button Matsa Manual |
| Ka'idar Haɗuwa | N.A (No WiFi) |
| Girma (L x W x H) | 4.49 x 2.76 x 1.34 inci |
| Nauyin Abu | 5 oz |
| Launi | Fari |
Image: Product dimensions of the dimmer switch.
4. Shigarwa
Muhimmi: Installation should be performed by a qualified electrician or a person with knowledge of electrical wiring. Ensure power is turned off at the circuit breaker before beginning installation.
- Kashe Wuta: Locate the circuit breaker controlling the light switch you intend to replace and turn off the power. Verify the power is off using a voltage gwajin.
- Cire Tsohon Sauyi: A hankali a cire farantin bango da ke akwai sannan a cire tsohon makullin daga akwatin lantarki. A cire wayoyin daga tsohon makullin.
- Gane Wayoyi: Identify the following wires in your electrical box:
- Line Wire: Yana ɗaukar wutar lantarki daga mai karya da'ira.
- Load Waya: Connects to the light fixture.
- Waya Ta Tsakiya: Typically white, required for this dimmer switch.
- Wayar Kasa: Bare copper or green.
- Wire the Dimmer Switch: Connect the wires from the dimmer switch to the corresponding wires in the electrical box using the provided wire nuts. Refer to the wiring diagram below.
- Dimmer Switch Farar Waya to Wall Box Waya Ta Tsakiya
- Dimmer Switch Black Waya to Wall Box Power Supply's Line (Live)
- Dimmer Switch Jan Waya to Wall Box Load Waya
- Dimmer Switch Kore Waya to Wall Box Wayar ƙasa
- Dutsen Canjawa: Carefully push the wired dimmer switch into the electrical box. Secure it with the provided screws.
- Sanya Farantin bango: Attach the new wall plate over the dimmer switch.
- Dawo da Power: Kunna wutar baya a na'urar kashe wutar lantarki.
Image: Wiring diagram for single-pole installation. Ensure a neutral wire is available.
Note: This dimmer switch works in single-pole only and requires a neutral wire. It is not a smart dimmer switch and cannot be connected to Wi-Fi.
5. Aiki
The BN-LINK Dimmer Light Switch features intuitive controls for adjusting light brightness and an indicator light for visibility in the dark.
Amfani na Farko
During the first use, press the power button on the dimmer switch. The initial brightness of the light is set at 100%. Use the "+" and "-" buttons for fast adjustments and fine adjustment.
Video: Demonstration of the BN-LINK Dimmer Light Switch's operation, including fast and fine dimming adjustments and memory function.
Sarrafa Ƙariview
Image: Labeled buttons on the dimmer switch for power, dimming up, and dimming down, with indicator lights.
- Maɓallin Wuta: Press to turn the lighting On/Off.
- Dimmer "+" Button:
- Fast Adjustment: Press briefly to increase brightness by 10% each time.
- Kyakkyawan Gyara: Press and hold to gradually increase brightness by 1% each time. - Dimmer "-" Button:
- Fast Adjustment: Press briefly to decrease brightness by 10% each time.
- Kyakkyawan Gyara: Press and hold to gradually decrease brightness by 1% each time. - Fitilar Nuni: Display the current brightness level (20%, 40%, 60%, 80%, 100%).
Image: Visual representation of the fast (10% increments) and fine (1% increments) brightness adjustment modes.
Ayyukan ƙwaƙwalwa
The dimmer switch remembers the last brightness level used and restores it automatically the next time the light is turned on.
Image: The thoughtful indicator light helps locate the dimmer easily in the dark.
6. Daidaituwa
This dimmer switch is compatible with various dimmable light sources:
- Dimmable LED: 3-150W, 125V/60Hz
- Dimmable CFL: 3-150W, 125V/60Hz
- Lantarki Lamp: 3-400W, 125V/60Hz
Please ensure that your fluorescent lamp da LED lamp are dimmable, and the total load of the bulbs is within the specified range.
Image: Illustration of wide compatibility with incandescent, dimmable LED, and dimmable CFL bulbs.
