1. Gabatarwa
Thank you for choosing the FLARING FC650D PLUS Plasma Cutter. This advanced 65 AMP plasma cutting machine is designed for efficient and precise cutting of various metals. Featuring dual voltage compatibility (120V/240V), a high-frequency IGBT inverter, and a large digital display, it offers powerful performance and ease of use for both professionals and enthusiasts. This manual provides essential information for safe operation, setup, maintenance, and troubleshooting to ensure optimal performance and longevity of your device.
Figure 1.1: FLARING FC650D PLUS Plasma Cutter and included accessories.
2. Bayanin Tsaro
Always prioritize safety when operating the plasma cutter. Failure to follow safety guidelines can result in serious injury or damage to equipment.
- Wutar lantarki: Plasma cutting involves high voltage. Ensure proper grounding. Do not operate in wet conditions. Wear dry gloves.
- Fus da Gases: Cutting metals produces fumes and gases that can be hazardous. Work in a well-ventilated area or use local exhaust ventilation.
- Arc Rays: The plasma arc produces intense visible and invisible (UV and IR) rays that can burn eyes and skin. Always wear appropriate welding helmet with a suitable shade filter, protective clothing, and gloves.
- Wuta da Fashewa: Sparks and hot metal can cause fires. Keep flammable materials away from the cutting area. Do not cut containers that have held combustible materials.
- Surutu: Plasma cutting can be noisy. Wear hearing protection.
- Zafafan Sashe: The torch and workpiece will become hot. Allow them to cool before handling or wear heat-resistant gloves.
- Matsa iska: Ensure air compressor is properly maintained and regulated to the specified PSI.
- Kayan Kariyar Keɓaɓɓen (PPE): Always wear appropriate PPE, including a welding helmet, flame-resistant clothing, heavy-duty gloves, and safety footwear.
3. Abubuwan Kunshin
Tabbatar cewa duk abubuwan da aka jera a ƙasa suna cikin kunshin ku. Idan wani abu ya ɓace ko ya lalace, tuntuɓi tallafin abokin ciniki.
- FLARING FC650D PLUS Plasma Cutter Unit
- PT31 Plasma Cutting Torch (4M)
- Kasa Clamp with Cable (3M)
- Air Filter Regulator (Pre-installed)
- Additional Consumables (4 PCS)
- Power Adapter (for 120V connection)
- Jagoran Jagora
Figure 3.1: All components included with the FC650D PLUS Plasma Cutter.
4. Samfurin Ya Ƙareview da Bayani
4.1. Mabuɗin Siffofin
- 7th Generation 65A Touch Arc Plasma Cutter: High-frequency touch arc starting for efficient cutting.
- Dual Voltage (120V/240V): Vol na atomatiktage adaptation for versatile use.
- Fasahar Inverter IGBT: Provides stable and powerful cutting performance.
- Babban Nuni na Dijital: Real-time display of air pressure, voltage, da kuma halin yanzu.
- PA/2T/4T Functions: Offers control modes for various cutting needs.
- Mai šaukuwa da Karami: Tsarin mai sauƙi tare da riƙo don sauƙin jigilar kaya.
4.2. Bayanan fasaha
| Ƙayyadaddun bayanai | Daraja |
|---|---|
| Samfura | FC650D PLUS |
| Shigar da Voltage | 120V/240V Dual Voltage |
| Max Current (120V) | 35 A |
| Max Current (240V) | 65 A |
| Clean Cut Thickness (120V) | 1/2" (12mm) at 35A, 50 PSI |
| Severance Cut Thickness (240V) | 5/8" (16mm) at 60A, 60 PSI |
| Recommended Breaker Size (240V) | 40 A |
| Recommended Breaker Size (120V) | 55 A |
| Required Air Compressor | 90 PSI, 60 L/min or above |
| Nauyin Abu | 14.92 fam |
| Girman Kunshin | 17.5 x 11 x 9.7 inci |
| Tushen wutar lantarki | AC |
Figure 4.1: Compact and lightweight design of the FC650D PLUS.
5. Saita Umarnin
5.1. Haɗin Wuta
The FC650D PLUS supports dual voltage input (120V/240V).
- For 240V operation, connect the main power cord directly to a compatible 240V outlet. Ensure the circuit breaker is rated for at least 40A.
- For 120V operation, use the provided power adapter to connect the main power cord to a 120V outlet. Ensure the circuit breaker is rated for at least 55A.
- Always ensure the power source is stable and properly grounded.
5.2. Haɗin Jirgin Ruwa
A clean, dry air supply is crucial for optimal plasma cutting performance.
- Connect your air compressor to the air inlet on the back of the plasma cutter.
- The FC650D PLUS features a pre-installed air filter regulator. This regulator automatically senses and displays the air pressure on the digital screen, eliminating the need for an external gauge.
- Ensure your air compressor can provide a minimum of 90 PSI and 60 L/min airflow.
Figure 5.1: The pre-installed air regulator simplifies setup and displays pressure digitally.
5.3. Torch and Ground Clamp Haɗin kai
- Connect the PT31 plasma cutting torch cable to the designated port on the front panel of the machine. Ensure it is securely fastened.
- Haɗa ƙasa clamp cable to the ground terminal on the front panel.
- Haɗa ƙasa clamp firmly to the workpiece or a clean, bare metal surface that is electrically connected to the workpiece. A good ground connection is essential for safe and effective cutting.
6. Umarnin Aiki
6.1. Powering On and Digital Display
Turn on the power switch located on the back of the unit. The large digital display will illuminate, showing real-time parameters.
Figure 6.1: The digital display provides real-time operational data.
- The display shows air pressure (PSI), output current (Amps), and voltage.
- Indicators for Post Air, Pilot Arc, Air Pressure, Air Testing, 2T, and 4T functions are also present.
- Adjust the current using the control knob on the front panel to match your cutting requirements.
6.2. Understanding PA/2T/4T Functions
- PA (Post Air) Time: This function allows adjustment of the post-flow air time after the arc is extinguished. Proper post-air time helps cool the torch consumables, extending their lifespan.
- 2T (Two-Touch) Control: This is a semi-automatic cutting control mode. Press and hold the torch trigger to start the arc and cut. Release the trigger to stop. Ideal for short, quick cuts.
- 4T (Four-Touch) Control: This is an automatic cutting control mode. Press and release the torch trigger to start the arc and cut continuously. Press and release the trigger again to stop. This mode is suitable for long, continuous cuts, reducing operator fatigue and potentially leading to higher cutting quality with lower consumable wear.
6.3. Cutting Performance and Material Compatibility
The FC650D PLUS is capable of cutting various types of metal with precision.
Figure 6.2: Demonstrating clean cut and severance cut capabilities.
- Clean Cut: Up to 1/2 inch (12mm) at 35A (120V, 50 PSI). This refers to a cut with minimal dross and a smooth edge.
- Severance Cut: Up to 5/8 inch (16mm) at 60A (240V, 60 PSI). This refers to the maximum thickness the machine can cut, though the quality of the cut may be reduced.
- The machine effortlessly cuts through rough, painted, and rusty surfaces while generating minimal slag.
Kayayyakin da suka dace:
- Karfe
- Steels
- Aluminum farantin
- Iron
- Bakin karfe
- Alloy karfe
- Karfe mai laushi
- Copper
Figure 6.3: The FC650D PLUS is suitable for a wide range of metal cutting applications.
7. Kulawa
Regular maintenance ensures the longevity and optimal performance of your plasma cutter. Always disconnect the power before performing any maintenance.
- Consumables Inspection: Regularly inspect the torch consumables (electrode, nozzle, swirl ring, shield cup) for wear. Replace them when they show signs of degradation to maintain cut quality and prevent damage to the torch.
- Air Filter Regulator: Periodically check the water trap on the air filter regulator. Drain any accumulated moisture to ensure a dry air supply. Clean or replace the filter element if it becomes clogged.
- Tsarin sanyaya: Ensure the cooling vents on the machine are clear of dust and debris to prevent overheating. Use compressed air to blow out dust from inside the machine if necessary (do this in a well-ventilated area).
- Kebul da Haɗi: Inspect all cables (power, torch, ground) for damage, cuts, or frayed insulation. Ensure all connections are tight and secure.
- Tsabtace Gabaɗaya: Keep the exterior of the machine clean. Wipe down with a dry cloth. Avoid using solvents that could damage the casing.
8. Shirya matsala
Wannan sashe yana magance batutuwan gama gari da zaku iya fuskanta. Don matsalolin da ba a lissafa a nan ba, tuntuɓi tallafin abokin ciniki.
| Matsala | Dalili mai yiwuwa | Magani |
|---|---|---|
| Inji baya kunnawa. | Babu wutar lantarki; na'urar karya da'ira ta toshe; igiyar wutar lantarki ta lalace. | Check power connection, wall outlet, and circuit breaker. Ensure power cord is undamaged. |
| Babu baka ko baka mai rauni. | Rashin isasshen iska; kayan amfani da aka sawa; mummunan haɗin ƙasa; saitin halin yanzu ba daidai ba. | Verify air pressure (min 90 PSI); replace worn torch consumables; ensure ground clamp has good contact; adjust current setting. |
| Poor cut quality (excessive dross, rough cut). | Worn consumables; incorrect cutting speed; incorrect current/air pressure; torch too far from workpiece. | Replace consumables; adjust cutting speed; optimize current and air pressure settings; maintain proper torch standoff distance. |
| Air flows but no arc. | Torch trigger issue; internal fault; consumables not seated correctly. | Check torch trigger; reseat consumables; if problem persists, contact support. |
| Overheat indicator on. | Machine has exceeded duty cycle; blocked cooling vents. | Allow machine to cool down; ensure cooling vents are clear. Reduce continuous cutting time. |
9. Garanti da Tallafawa
FLARING products are manufactured to high-quality standards. For information regarding warranty coverage, technical support, or to purchase replacement parts and consumables, please refer to the warranty card included with your product or visit the official FLARING website.
Hakanan zaka iya ziyartar wurin FLARING Store on Amazon don bayanin samfur da tallafi.
