Antec VX320 ARGB ATX Mid Tower PC Case User Manual

1. Gabatarwa

Thank you for choosing the Antec VX320 ARGB ATX Mid Tower PC Case. This manual provides essential information for the proper installation, operation, and maintenance of your new PC case. Please read this manual thoroughly before beginning installation to ensure correct assembly and to maximize the performance and longevity of your system.

Image 1.1: The Antec VX320 ARGB Mid Tower PC Case, showcasing its design and ARGB lighting in a typical desktop setup.

2. Mabuɗin Siffofin

• Tsarin Iska Mai Kyau: Features a mesh front panel and multiple ventilation points for superior cooling performance.
• ARGB Lighting: Equipped with four pre-installed ARGB fans (3 front, 1 rear) for customizable illumination.
• Faifan Gefen Gilashin Mai Zafi: Yana ba da bayyananne view of internal components and enhances aesthetic appeal.
• Faɗin Daidaitawa: Supports ATX, Micro-ATX, and Mini-ITX motherboards, along with ample space for GPUs and storage drives.
• User-Friendly I/O Panel: Conveniently located ports including USB 3.0, USB 2.0, and audio jacks.

Image 2.1: The VX320 ARGB case highlighting its unique design and effective heat dissipation capabilities through its ventilated front grille and tempered glass side panel.

Hoto 2.2: Cikakken bayani view of the stylish mesh front panel, designed to maximize airflow for optimal cooling efficiency.

Image 2.3: Illustration of the high-airflow paths within the case, demonstrating how air intakes at the front contribute to efficient heat dissipation.

3. Abubuwan Kunshin

Da fatan za a tabbatar da cewa duk abubuwan suna nan a cikin kunshin kafin a ci gaba da shigarwa:

• Antec VX320 ARGB ATX Mid Tower PC Case
• Pre-installed 120mm ARGB Fans (3 front, 1 rear)
• Accessory Box (screws, cable ties, standoffs)
• Jagorar mai amfani (wannan takaddar)

4. Saita da Shigarwa

Follow these steps for proper installation of your components into the Antec VX320 ARGB PC Case.

4.1 Shirya Shari'ar

1. Sanya akwatin a kan wani wuri mai faɗi da kwanciyar hankali.
2. Remove the tempered glass side panel by unscrewing the thumb screws at the rear and carefully sliding it off.
3. Remove the opposite metal side panel by unscrewing the thumb screws and sliding it off.

4.2 Shigar da Motherboard

1. Install the I/O shield (if not pre-attached to your motherboard) into the rear opening of the case.
2. Align your ATX, Micro-ATX, or Mini-ITX motherboard with the pre-installed standoffs. Ensure the standoffs match your motherboard's screw holes.
3. Haɗa motherboard ɗin da sukurori da aka bayar.

4.3 Shigar da Wutar Lantarki (PSU)

1. Nemo yankin da aka ɗora PSU a ƙasan bayan akwatin.
2. Slide your PSU into the designated bay from the rear of the case.
3. Secure the PSU with screws from the outside rear of the case.

4.4 Shigar da Ma'ajiyar Na'ura

Refer to your specific drive type (2.5" SSD/HDD or 3.5" HDD) for appropriate mounting locations within the case.

4.5 Katin Zane da Shigar Katin Fadada

1. Cire murfin ramin PCIe da ake buƙata daga bayan akwatin.
2. Saka katin zane ko wasu katunan faɗaɗawa a cikin ramukan PCIe na motherboard.
3. Kafa katunan da sukurori.

4.6 Connecting Front I/O Panel Cables

Connect the cables from the case's front I/O panel to the corresponding headers on your motherboard. These include:

• Power Switch (PWR SW)
• Reset Switch (RESET SW)
• Power LED (PLED +/-)
• HDD LED (HDD LED)
• USB 3.0 Header
• USB 2.0 Header
• HD Audio Header (AUDIO)
• LED Control Button (connects to ARGB controller or motherboard ARGB header)

Image 4.1: The front I/O panel, showing the location of USB 3.0, USB 2.0, audio jacks, LED control, reset, and power buttons. Ensure these are correctly connected to your motherboard.

4.7 Fan and ARGB Connections

The VX320 ARGB comes with four pre-installed ARGB fans. Connect their power cables to your motherboard's fan headers or a fan controller, and their ARGB cables to a compatible ARGB controller or motherboard ARGB header (5V 3-pin). The LED Control Button on the I/O panel can be used to cycle through ARGB effects if connected to the case's ARGB controller.

Image 4.2: The pre-installed fan configuration, featuring three 120mm ARGB fans at the front and one 120mm ARGB fan at the rear for balanced airflow.

Image 4.3: Fan mounting options, showing support for up to eight 120mm fans or various radiator configurations for enhanced cooling.

4.8 Gudanar da Kebul

Utilize the cable routing cutouts and tie-down points behind the motherboard tray to manage cables neatly. This improves airflow and aesthetics.

4.9 Rufe Harka

Once all components are installed and cables are managed, reattach both side panels and secure them with the thumb screws.

5. Umarnin Aiki

5.1 Kunnawa

Press the Power button on the front I/O panel to turn on your system. Ensure all external peripherals (monitor, keyboard, mouse) are connected.

5.2 ARGB Gudanar da Haske

The pre-installed ARGB fans can be controlled via the dedicated LED Control Button on the front I/O panel. Press this button to cycle through various lighting modes and colors. Alternatively, if the ARGB controller is connected to a compatible motherboard ARGB header, you can control the lighting using your motherboard's software (e.g., ASUS Aura Sync, MSI Mystic Light Sync, Gigabyte RGB Fusion, ASRock Polychrome Sync).

6. Kulawa

Kulawa akai-akai yana taimakawa wajen tabbatar da ingantaccen aiki da kuma tsawaita rayuwar kayan aikin PC ɗinku.

• Tsaftace Tacewar Kura: Periodically remove and clean the dust filters (if present) to maintain optimal airflow and prevent dust buildup inside the case. Use compressed air or a soft brush.
• Tsabtace Gabaɗaya: Yi amfani da taushi, damp cloth to wipe down the exterior of the case. Avoid abrasive cleaners or solvents. For the tempered glass panel, use a glass cleaner and a microfiber cloth.
• Cire ƙurar Ciki: Every few months, open the case and use compressed air to gently remove dust from fans, heatsinks, and other components. Ensure the system is powered off and unplugged before performing internal cleaning.

7. Shirya matsala

Wannan sashe yana magance batutuwan gama gari da zaku iya fuskanta.

• Tsarin Ba Ya Wuta:
  • Tabbatar cewa PSU ɗin ya kunna kuma an haɗa shi da kyau zuwa ga mashigar bango.
  • Tabbatar da cewa igiyoyin wutar lantarki na CPU 24-pin ATX da 8-pin CPU suna haɗe da amintacciyar hanyar uwa.
  • Check that the front panel Power Switch cable is correctly connected to the motherboard header.
• Fans Not Spinning or ARGB Not Lighting Up:
  • Ensure fan power cables are connected to appropriate headers (motherboard or fan controller).
  • Verify ARGB cables are connected to a 5V 3-pin ARGB header on the motherboard or the case's ARGB controller.
  • If using the LED Control Button, ensure it is connected to the ARGB controller.
  • Check motherboard software for ARGB control settings.
• Batutuwa masu zafi:
  • Ensure all case fans are spinning correctly and oriented for optimal airflow (intake at front, exhaust at rear/top).
  • Clean any dust filters and internal components to prevent airflow obstruction.
  • Verify CPU cooler and GPU fans are functioning properly.

8. Ƙayyadaddun bayanai

9. Garanti da Tallafawa

Antec products come with a manufacturer's warranty. Please refer to the official Antec website or your regional distributor for specific warranty terms and conditions. For technical support, product inquiries, or warranty claims, please contact Antec customer service through their official channels.

Official Antec Website: www.kwaiyanwatch.com