X-PRO 4000W 60V 27AH Electric Dirt Bike User Manual

Gabatarwa

This manual provides essential information for the safe and efficient operation, assembly, and maintenance of your X-PRO 4000W 60V 27AH Electric Dirt Bike (Model DB-E02). Please read this manual thoroughly before initial use and retain it for future reference. This vehicle is designed for off-road use only.

Image: X-PRO E02 4000W Electric Dirt Bike being ridden on a dirt path.

Bayanin Tsaro

Always prioritize safety when operating the electric dirt bike. Failure to follow safety guidelines can result in serious injury or damage to the vehicle.

• Wear appropriate safety gear, including a helmet, gloves, and protective clothing.
• Tabbatar cewa an ɗaure duk abubuwan haɗin gwiwa kafin kowace tafiya.
• Kada ku yi amfani da babur a ƙarƙashin rinjayar barasa ko kwayoyi.
• Familiarize yourself with local regulations regarding electric dirt bike use.
• This vehicle is intended for off-road use only and cannot be officially registered for any purpose.

Saita da Majalisa

Your X-PRO Electric Dirt Bike requires some assembly. Follow these steps carefully. Refer to the assembly video for visual guidance.

Cire Akwatin da Binciken Farko

1. A hankali buɗe katon jigilar kaya.
2. Remove the outer cardboard box and metal frame.
3. Locate the accessory box containing tools and small parts.
4. Remove all protective packaging and zip ties from the bike components.

Shigar da sandar hannu

1. Position the handlebars into the clamps on the fork.
2. Ensure the display and control buttons are correctly oriented.
3. Secure the handlebars using the provided bolts and Allen wrench. Tighten evenly.

Image: Close-up of the X-PRO Electric Dirt Bike handlebars with the display and controls mounted.

Shigarwa Gaban Wheel

1. Remove the protective spacer from the front brake caliper.
2. Align the brake rotor with the brake caliper.
3. Insert the front axle through the wheel hub and fork.
4. Secure the axle with the washers and nuts, tightening them firmly with the provided wrenches.

Image: The front wheel of the X-PRO Electric Dirt Bike, highlighting the 19-inch tire and disc brake system.

Rear Fender Installation

1. Attach the rear fender to the designated mounting points on the frame.
2. Use the provided screws and Allen wrench to secure it.

Headlight Cover Installation

1. Position the headlight cover over the front LED light assembly.
2. Align the mounting holes and secure with the provided screws.

Hoto: Gaba view of the X-PRO Electric Dirt Bike, showcasing the dual LED headlight.

Umarnin Aiki

Familiarize yourself with the controls and features before riding.

Kunna/Kashe Wuta

• To power on the bike, press and hold the power button on the handlebar control panel. The display will illuminate.
• Don kashe wuta, danna kuma ka riƙe maɓallin wuta har sai nuni ya kashe.

Yanayin Sauri

The bike features 3 safe speed modes:

• Gear 1: Approximately 15 mph (25 km/h) for a relaxed pace.
• Gear 2: Approximately 22 mph (35 km/h) for balanced performance.
• Kayan aiki na 3: Approximately 34 mph (55 km/h) for higher speed.

Use the '+' and '-' buttons on the control panel to switch between speed modes.

Headlight and Taillight Operation

• Press the headlight button on the control panel to turn the front LED headlight on or off.
• The rear taillight operates in conjunction with the headlight.

Kaho

Press the green horn button on the left handlebar to activate the horn.

Kulawa

Regular maintenance ensures the longevity and optimal performance of your electric dirt bike.

• Matsin Taya: Check tire pressure before each ride. Maintain recommended PSI for optimal performance and safety.
• Birki: Regularly inspect brake pads and rotors for wear. Ensure brake levers operate smoothly and provide adequate stopping power.
• Sarka: Keep the chain clean and lubricated to prevent rust and ensure smooth operation.
• Kulawar Baturi: Charge the 60V 27AH lithium battery fully after each use. Avoid completely draining the battery. Store the bike in a cool, dry place when not in use. Charging time is approximately 5 hours.
• Tsabtace Gabaɗaya: Tsaftace babur akai-akai tare da tallaamp zane. Ka guji amfani da jiragen ruwa masu matsa lamba kai tsaye akan abubuwan lantarki.

Shirya matsala

If you encounter issues with your X-PRO Electric Dirt Bike, refer to these common solutions. For persistent problems, contact customer support.

• Bike does not power on: Ensure the battery is fully charged and properly connected. Check all electrical connections.
• Motar ba ta da hannu: Verify the power is on and the correct speed mode is selected. Check for any error codes on the display.
• Brakes feel weak: Inspect brake pads for wear and ensure hydraulic fluid levels are adequate (if applicable). Adjust brake tension if necessary.
• Hayaniyar da ba a saba gani ba: Stop riding immediately and inspect the bike for loose parts, chain issues, or foreign objects.

Ƙayyadaddun bayanai

Image: Diagram illustrating the dimensions and weight specifications of the X-PRO Electric Dirt Bike.

Garanti da Taimako

Your X-PRO Electric Dirt Bike comes with a 1-month warranty. For any questions, technical assistance, or parts inquiries, please visit the X-PRO Store ko tuntuɓi sabis na abokin ciniki.