ATEN Command Line Interface

Ƙayyadaddun bayanai

• Samfurin: ATEN Control System
• Ayyuka: Gudanar da masu sarrafa ATEN da nisa da akwatunan faɗaɗa ta hanyar SSH/Telnet

Umarnin Amfani da samfur

Kafa Zaman SSH/Telnet

1. Zazzage abokin ciniki na SSH/Telnet kamar PuTTY akan kwamfuta tare da samun dama ga mai sarrafa ATEN ko Akwatin Faɗawa.
2. Gudun abokin ciniki da aka zazzage.
3. Don zaman SSH:
   • Sunan Mai watsa shiri / Adireshin IP: Shigar da mai sarrafa manufa ko adireshin IP na akwatin fadada ko sunan mai masauki.
   • Nau'in Haɗin kai: SSH
   • Saukewa: 22
4. Don zaman telnet:
   • Sunan Mai watsa shiri / Adireshin IP: Shigar da mai sarrafa manufa ko
     adireshin IP na akwatin fadada ko sunan mai masauki.
   • Nau'in haɗi: Wani > Telnet
   • Saukewa: 23
5. Danna Buɗe kuma bi umarnin kan allo don shiga.

Umurnin SSH/Telnet

Umurnin Taimako

• Amfani: Nuna umarnin don kunna yanayin CLI na mai sarrafawa.
• Daidaitawa: taimako
• Amince: Umurnin Ok - An aiwatar da aikin; Umurnin ba daidai ba - Ba a aiwatar da shi ba
• Exampda: taimako: nuni umarnin yanayin CLI

Kunna/Kashe Amsar Echo

• Amfani: Kunna ko kashe amsa ta atomatik zuwa saƙonnin da aka karɓa.
• Daidaitawa: echo[control]
• Siga: sarrafawa: kunna - kunna; kashe - kashe (an kashe tsoho)
• Amince: Umurnin Ok - An aiwatar da aikin; Umurnin ba daidai ba - Ba a aiwatar da shi ba
• Exampda: wanda akan: saita mai sarrafawa don amsawa ta atomatik ga saƙonnin da aka karɓa.

Saita Tazarar Lokaci na Telnet ko Shiga

• Amfani: Saita saitunan yanayin Telnet CLI.
• Daidaitawa: telnet[tazara tazara [ikon shiga]
• Siga: lokacin ƙarewa: Saitin tazara lokacin zaman Telnet; shiga: Saitin aikin shiga Telnet
• Amince: Umurnin Ok - An aiwatar da aikin; Umurnin ba daidai ba - Ba a aiwatar da shi ba
• Exampda: telnet timeout 0 : saita tazarar lokaci don kada ya ƙare

Ana saita Serial Port Saituna

• Amfani: Sarrafa kuma saita saitunan tashar tashar jiragen ruwa.

Tambayoyin da ake yawan yi (FAQ)

Tambaya: Menene zan yi idan ba a iya kafa zaman SSH/Telnet ba?
A: Idan ba za a iya kafa zaman ba, shiga cikin na'ura mai sarrafa na'ura don bincika ko ana buƙatar canza maɓallin shiga.

Game da Wannan Jagorar
Wannan jagorar tana ba da bayanai kan samuwan umarnin SSH da Telnet don sarrafa masu sarrafa ATEN da akwatunan faɗaɗa nesa.

MUHIMMI: Kanfigareshan da aka yi ta hanyar mu'amalar layin umarni za a sake rubuta shi idan aikin file Ana lodawa ta hanyar ATEN Configurator (GUI) daga baya.

Kafa Zaman SSH/Telnet

1. A kan kwamfutar da ke da damar yin amfani da mai sarrafa ATEN ko Akwatin Faɗawa, zazzage abokin ciniki na SSH/Telnet, misali PuTTY.
   Lura: Don samun mai sakawa, bincika "zazzage putty" a cikin wani web mai bincike.
2. Gudun abokin ciniki da aka zazzage.
3. Don kafa zaman SSH, yi amfani da saitunan masu zuwa.
   

   Filin	Saita
   Sunan Mai watsa shiri / adireshin IP	Adireshin IP ko sunan mai watsa shiri na mai sarrafa manufa ko akwatin fadadawa
   Nau'in Haɗi	SSH
   Port	22

   Don misaliampda:

4. Don kafa zaman telnet, yi amfani da saitunan masu zuwa.
   

   Filin	Saita
   Sunan Mai watsa shiri / adireshin IP	Adireshin IP ko sunan mai watsa shiri na mai kula da manufa ko akwatin fadada
   Nau'in Haɗi	Sauran > Telnet
   Port	23

   Don misaliampda:

5. Danna Buɗe kuma bi umarnin kan allo don shigar da bayanan shiga. An kafa zaman. Don misaliampda:

Lura: Idan ba za a iya kafa zaman ba, shiga cikin na'ura mai sarrafa na'ura don bincika ko ana buƙatar canza maɓallin shiga.

Umurnin SSH/Telnet

Taimako

• Amfani:
  Nuna umarnin don kunna yanayin CLI na mai sarrafawa.
• Daidaitawa:
  taimako ↙
• Amince:
  Umurnin Ok↙: Umurnin daidai ne kuma ana aiwatar da aikin.
  Umurni ba daidai ba ↙: Umurni da/ko sigogi ba daidai ba ne kuma ba a aiwatar da su ba.
• Exampda:
  taimako↙ : nuni umarnin yanayin CLI

Kunna/Kashe Amsar Echo

• Amfani:
  Kunna ko kashe mai sarrafawa don amsa saƙonnin da aka karɓa ta atomatik.
• Daidaitawa:
  echo[control] ↙
• Siga:
  sarrafawa: kunna - kunna wannan aikin
  kashe - kashe wannan aikin (an kashe tsoho)
• Amince:
  Umurnin Ok↙: Umurnin daidai ne kuma ana aiwatar da aikin.
  Umurni ba daidai ba ↙: Umurni da/ko sigogi ba daidai ba ne kuma ba a aiwatar da su ba.
• Exampda:
  eho on↙ : saita mai sarrafawa don amsa saƙonnin da aka karɓa ta atomatik.

Saita Tazarar Lokaci na Telnet ko Shiga

• Amfani:
  Saita saitunan yanayin Telnet CLI.
• Daidaitawa:
  telnet[tazara tazara [ikon shiga] ↙
• Mabuɗin kalma
  lokacin ƙarewa: Saitin tazara lokacin zaman Telnet
  shiga : Telnet saitin aikin shiga
• Siga:
  tazara: lokacin zama a cikin mintuna. (0 yana nufin ba zai ƙare lokaci ba) (tsoho shine 5)
  sarrafawa: kunnawa - kunna aikin shiga (tsoho yana kunne)
  kashe – kashe aikin shiga
• Amince:
  Umurnin Ok↙: Umurnin daidai ne kuma ana aiwatar da aikin.
  Umurni ba daidai ba ↙: Umurni da/ko sigogi ba daidai ba ne kuma ba a aiwatar da su ba.
• Exampda:
  telnet timeout 0↙ : saita tazarar lokaci don kada ya ƙare
  telnet timeout 5↙: saita tazarar lokaci zuwa mintuna 5
  telnet login off↙: kashe aikin shiga

Ana saita Serial Port Saituna

Amfani:
Sarrafa kuma saita saitunan tashar tashar jiragen ruwa.

Daidaitawa:
serial [p jerin] [nau'in stype] [baud baudrate] [dbit databit] [paraty sparity] [sbit stopbit] [fctrl flowctrl] [dtype datatype] [endchar chars] [checksumtype checksumtype] [baud baudrate] [tsawon lokaci] [sarrafa "bayanai" ] [taimako] ↙d

Mabuɗin kalma:

• p: tashar
• nau'in: nau'in serial
• baud : baud rate
• dbit: data bit
• parity: serial parity
• sbit: tsaya bit
• fctrl: sarrafa kwarara
• dtype: data type
• acktimeout: Ana amfani da tsawon lokacin ƙarewa (ms) don jiran amsa daga sarrafa aika aika.
• endchar: ana amfani da takamaiman hali na ƙarshe don gano cikakken saƙo.
• checksumtype : idan ana buƙatar fw don ƙididdige adadin umarni ta atomatik, sanya nau'in checksum
• taimako: nuna umarnin

Siga:

• jerin: tashar jiragen ruwa, rabu da waƙafi don mahara mashigai * (duk mashigai)
• siffa: 232, 422, 485 (default 232)
• baudrate: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 (tsoho 9600)
• Databit: 7, 8 (default 8)
• sparity: babu, ko da, m (babu tsoho)
• tsayawa: 1, 2 (default 1)
• flowctrl: babu, hw (babu tsoho)
• datatype: ascii, hex (tsoho ascii)
• checksumtype: babu, modbus (babu tsoho)
• tsawon lokaci: ƙayyadaddun lokaci (ms) (tsoho 300)
• chars : ƙarshen haruffa suna bin cikakken saƙo.
• sarrafawa: karanta - nuni da aka karɓi saƙon takamaiman tashar tashar jiragen ruwa
• rubuta - aika bayanai daga serial port. Yi amfani da "alamar ta rufe bayanai. Yi amfani da alamar \x don aika lambar Hex
• sendack – aika bayanai daga serial port da nuni da aka karɓa saƙo

Yardabaki:
Umurnin Ok↙: Umurnin daidai ne kuma ana aiwatar da aikin.
Umurni ba daidai ba ↙: Umurni da/ko sigogi ba daidai ba ne kuma ba a aiwatar da su ba.

Exampda:

• Serial help ↙ : nuna umarnin
• serial p01 ↙: nuna bayanan saitin tashar tashar jiragen ruwa1.
• serial p* ↙ : nuna bayanan saitin duk tashar jiragen ruwa na serial.
• serial p01 nau'in 232 baud 115200 dbit 8 parity babu sbit 1 fctrl babu ↙: saita tashar jiragen ruwa1.
• serial p01,04,07 baud 19200 ↙: saita port1, 4, 7 zuwa baud rate 19200.
• serial p02 baud 19200 ↙: saita port2 zuwa baud 19200 kuma yi amfani da saitunan tsoho don wasu sigogi.
• serial p02 dtype hex karanta ↙: nuna saƙon da aka karɓa na port2 a tsarin HEX.
• serial p03 rubuta "sw i01 o02\r\n" ↙ : aika da rubutun ASCII 'sw i01 o02' daga port3.
• serial p03 sendack “sw i01 o02 x0D\x0A” ↙ : aika da rubutun ASCII 'sw i01 o02' daga port3 kuma nuna ra'ayoyin.

Ana saita Saitunan Tashar Tashar Relay

Amfani:
Sarrafa kuma saita tashar jiragen ruwa na relay.

Daidaitawa:
relay [p jerin] [tpulse duration] [control] [taimako] ↙

Mabuɗin kalma:

• p: tashar
• tpulse: lokacin rufewa don bugun jini
• taimako: nuna umarnin

Siga:

• jerin: tashar jiragen ruwa, rabu da waƙafi don mashigai da yawa
• * (dukkan tashar jiragen ruwa)
• duration : lokacin lokaci a cikin millisecond.
• sarrafawa: budewa - kashe
• kusa - kunna
• bugun jini – rufe tashar relay sannan a bude
• jujjuya - jujjuyawar gudu
• karanta - halin nuni

Amince:
Umurnin Ok↙: Umurnin daidai ne kuma ana aiwatar da aikin.
Umurni ba daidai ba ↙: Umurni da/ko sigogi ba daidai ba ne kuma ba a aiwatar da su ba.

Exampda:

• gudun ba da sanda taimako ↙ : nuna umarnin
• relay p01 rufe ↙: tashar tashar tashar tashar jiragen ruwa.
• relay p01 bude ↙: bude tashar port1.
• relay p01,04,07 kusa ↙: kusa da tashar jiragen ruwa 1, 4, 7 tashoshi na relay.
• relay p02 tpulse 500 pulse ↙ : kusa port2 500ms sai a bude.
• relay p02 karanta ↙: nuni matsayi port2.

Ana saita Saitunan Tashar I/O

Amfani:
Sarrafa kuma saita tashoshin I/O.

Daidaitawa:
io [p jerin] [nau'in iotype] [matakin bakin ciki] [kofar hthresh] [tpulse duration] [control] [taimako] ↙

Mabuɗin kalma:

• p: tashar
• lthresh: ƙananan iyaka
• hthresh: babban kofa
• tpulse: lokacin da I/O ya kasance cikin babban matakin a yanayin bugun jini
• taimako: nuna umarnin
• NOTE: Idan ba a kayyade siga ba, za a yi amfani da ƙimar da aka shigar a baya.
• Siga:
• jerin: tashar jiragen ruwa, rabu da waƙafi don mashigai da yawa
• * (dukkan tashar jiragen ruwa)
• iotype: bushe, vdc, dout
• bakin kofa: fararwa bakin kofa a voltage
• duration : lokacin lokaci a cikin millisecond.
• sarrafawa: bude
• kusa
• bugun jini
• juya
• karanta

Amince:
Umurnin Ok↙: Umurnin daidai ne kuma ana aiwatar da aikin.
Umurni ba daidai ba ↙: Umurni da/ko sigogi ba daidai ba ne kuma ba a aiwatar da su ba.

Exampda:

• io help ↙ : nuna umarnin
• io p01↙ : nuna bayanan saitin tashar tashar I/O1.
• io p*↙: nuna bayanan saitin duk tashoshin I/O.
• io p01 irin bushe ↙: saita tashar jiragen ruwa 1 don bushe yanayin lamba.
• io p01 nau'in dout ↙: saita tashar jiragen ruwa 1 zuwa yanayin fitarwa na dijital.
• io p01 vdc lthresh 1 hthresh 3 ↙: saita tashar jiragen ruwa 1 zuwa yanayin vdc tare da saitunan kofa.
• io p01 bude ↙: bude tashar tashar jiragen ruwa1.
• io p01 rufe ↙: tashar tashar tashar tashar jiragen ruwa.
• io p01,04,07 rufe ↙: kusa da tashar jiragen ruwa1,4,7.
• io p02 tpulse 500 pulse ↙ : kusa port2 channel 500ms sai a bude.
• io p02 karanta ↙: nuni matsayi port2.

Ana saita saitunan IR

Amfani:
Sarrafa kuma saita tashoshin IR.

Daidaitawa:
ir [p jerin] [nau'in irtype] | [baud baudrate] [dbit databit] [paraty sparity] [sbit stopbit] [dtype datatype] [checksumtype checksumtype] [ sarrafa “bayanai”] [taimako] ↙

Mabuɗin kalma:

• p: tashar
• nau'in: nau'in fitarwa don takamaiman tashar fitarwa
• baud** : baud rate
• dbit ***: data bit
• parity**: serial parity
• sbit *** : tsaya bit
• dtype**: nau'in data
• checksumtype** : Mai sarrafawa/akwatin tsawa ta atomatik yana ƙididdige ƙayyadadden nau'in checksum
• taimako: nuna umarnin

NOTE:
* : Wannan mahimmin kalmar don nau'in IR ne
** : Waɗannan kalmomin suna don nau'in 232 ne

Idan ba a bayyana siga ba, za a yi amfani da ƙimar da aka shigar a baya.

Siga:

• jerin: tashar jiragen ruwa, rabu da waƙafi don mahara mashigai * (duk mashigai)
• irtype: ir, 232 (default ir)
• baudrate: 300, 600, 1200, 2400, 4800, 9600, 19200, 38400, 57600, 115200 (tsoho 9600)
• Databit: 7, 8 (default 8)
• sparity: babu, ko da, m (babu tsoho)
• tsayawa: 1, 2 (default 1)
• datatype: ascii, hex (tsoho ascii)
• checksumtype: babu, modbus (babu tsoho)
• sarrafawa: rubuta - aika lambar IR ko bayanan RS232

Amince:
Umurnin Ok↙: Umurnin daidai ne kuma ana aiwatar da aikin.
Umurni ba daidai ba ↙: Umurni da/ko sigogi ba daidai ba ne kuma ba a aiwatar da su ba.

Example:

• ir help ↙ : nuna umarnin
• ir p01 ↙: nuna bayanan saitin tashar IR1.
• ir p* ↙: nuna bayanan saitin duk tashoshin IR.
• ir p01,04,07 nau'in 232 ↙: saita tashar jiragen ruwa1,4,7 zuwa nau'in RS232
• ir p01 irin 232 baud 115200 dbit 8 parity babu sbit 1 checksum nau'in modbus↙: saita port1 zuwa nau'in RS232 da saitunan
• ir p02 rubuta dtype hex "0a0b0c" ↙ : aika hex format data 0a0b0c daga port2
• ir p02 baud 19200 ↙: saita port2 zuwa baud 19200 kuma yi amfani da saitunan tsoho don wasu sigogi.
• ir p02 rubuta "sw i01 o02\r\n" ↙ : aika da rubutun ASCII 'sw i01 o02' daga port2.
• ir p02 rubuta "sw i01 o02 x0D\x0A"↙ : aika da rubutun ASCII 'sw i01 o02' daga port2.

Sake yi

Amfani:
Sake kunna mai sarrafawa.

Daidaitawa:
sake yi ↙

Amince:
Umurnin Ok↙: Umurnin daidai ne kuma ana aiwatar da aikin.
Umurni ba daidai ba ↙: Umurni da/ko sigogi ba daidai ba ne kuma ba a aiwatar da su ba.

Exampda:
sake yi↙ : sake yi na'urar

Takardu / Albarkatu

ATEN Command Line Interface [pdf] Jagorar mai amfani Matsalolin Layin Umurni, Interface, Interface

Magana

• Manual mai amfani