Mai karanta AXIS A4030-E
Karanta wannan tukuna
- Karanta ta wannan jagorar shigarwa a hankali kafin shigar da samfurin. Kiyaye jagorar shigarwa don tunani na gaba.
Alhaki
- Every care has been taken in the preparation of this document. Please inform your local Axis office of any inaccuracies or omissions. Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice.
- Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose.
- Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material. This product is only to be used for its intended purpose.
Haƙƙin mallaka na hankali
- Axis AB yana da haƙƙin mallakar fasaha da suka shafi fasaha da ke cikin samfurin da aka kwatanta a cikin wannan takaddar. Musamman, kuma ba tare da iyakancewa ba, waɗannan haƙƙoƙin mallakar fasaha na iya haɗawa da ɗaya ko fiye na haƙƙin mallaka da aka jera a axis.com/patent da ɗaya ko fiye ƙarin haƙƙin mallaka ko aikace-aikacen haƙƙin mallaka a Amurka da wasu ƙasashe.
Gyaran kayan aiki
- Dole ne a shigar da wannan kayan aikin kuma a yi amfani da shi daidai da umarnin da aka bayar a cikin takaddun mai amfani. Wannan kayan aikin ba ya ƙunshi abubuwan da za a iya amfani da su. Canje-canje na kayan aiki mara izini ko gyare-gyare za su lalata duk takaddun shaida da yarda na tsari.
Fitattu
Here is the requested information organized into a table for easy reference.
| Siffar | Mataki |
| Gwajin harin lalata | I |
| Tsaro | I |
| Juriya | IV |
| Ikon jiran aiki | I |
Yankin waya
- Kowace waya za ta kasance tana da madaidaicin yanki wanda ya dace da kewayon ma'aunin madugu na AWG 22-18. Zaɓi igiyoyi don dacewa da ƙa'idodin gida.
The following table provides the technical specifications for American Wire Gauge (AWG) sizes 22 through 18, including their respective diameters and cross-sectional areas.
AWG Wire Specifications (22–18 AWG)
| Girma AWG | Diamita (mm) | Diamita (a) | Yanki (mm²) |
| 22 | 0.644 | 0.0253 | 0.326 |
| 20 | 0.812 | 0.0320 | 0.518 |
| 18 | 1.024 | 0.0403 | 0.823 |
Lura: The range provided in your prompt (0.405–1.024 mm) effectively spans from 26 AWG to 18 AWG. The table above highlights the specific values for the 22–18 AWG range requested.
Nau'ukan shaida
The following credential types are supported:
- MIFARE Classic®
- MIFARE ®
- MIFARE DESFire® EV1
- MIFARE DESFire® EV2
- MIFARE DESFire® EV3
Bayanin aminci
Matakan haɗari
HADARI
- Yana nuna yanayi mai haɗari wanda, idan ba a kiyaye shi ba, zai haifar da mutuwa ko rauni mai tsanani.
GARGADI
- Yana nuna yanayi mai haɗari wanda, idan ba a kiyaye shi ba, zai iya haifar da mutuwa ko rauni mai tsanani.
HANKALI
- Yana nuna yanayi mai haɗari wanda, idan ba a kiyaye shi ba, zai iya haifar da ƙananan rauni ko matsakaici.
SANARWA
- Yana nuna yanayin da, idan ba a kauce masa ba, zai iya haifar da lalacewa ga dukiya.
Sauran matakan saƙo
Muhimmanci
- Indicates significant information that is essential for the product to function correctly.
Lura
- Yana nuna bayanai masu amfani waɗanda ke taimakawa wajen samun mafi kyawun samfurin.
Umarnin aminci
SANARWA
- Za a yi amfani da samfurin Axis cikin bin ƙa'idodi da ƙa'idodi na gida.
- Wannan samfurin don amfanin ƙwararru ne.
- Install this product at a safe distance from children.
- Ajiye samfurin Axis a cikin busasshen yanayi da iska.
- Guji fallasa samfurin Axis ga girgiza ko matsin lamba.
- Kada a shigar da samfurin akan sanduna maras ƙarfi, maƙallan, saman, ko bango.
- Yi amfani da kayan aikin da suka dace kawai lokacin shigar da samfurin Axis. Amfani da karfi da yawa tare da kayan aikin wuta na iya haifar da lalacewar samfurin.
- Yi amfani da yadi mai laushi dampened with pure lukewarm water to clean the device.
- Don’t use chemicals such as window cleaner or acetone to clean your device.
- Yi amfani da na'urorin haɗi kawai waɗanda suka dace da ƙayyadaddun fasaha na samfur naka. Ana iya ba da waɗannan ta Axis ko ɓangare na uku. Axis yana ba da shawarar amfani da kayan aikin tushen tushen Axis wanda ya dace da samfur naka.
- Yi amfani da kayayyakin gyara kawai da Axis ya bayar ko aka ba da shawarar.
- Kada kayi ƙoƙarin gyara samfurin da kanka. Tuntuɓi tallafin Axis ko mai siyar da ku na Axis don lamuran sabis.
Sufuri
SANARWA
- Lokacin jigilar samfuran Axis, yi amfani da fakitin asali ko daidai don hana lalacewar samfurin.
Baturi
- Lithium coin cell 3.0 V batteries contain 1,2-dimethoxyethane; ethylene glycol dimethyl ether (EGDME), CAS no. 110-71-4.
Dome or front glass
SANARWA
- Don’t clean a dome or front glass that looks clean to the eye, and never polish the surface. Excessive cleaning can damage the surface.
- Avoid cleaning the dome or front glass in direct sunlight or at elevated temperatures, since this can cause stains.
BAYANIN FCC
Wannan na'urar ta bi sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
- Wannan na'urar bazai haifar da tsangwama mai cutarwa ba;
- Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.
An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class B, bisa ga sashi na 15 na Dokokin FCC. An ƙirƙira waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifarwa, yana amfani da kuma zai iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma ana amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:
- Sake daidaitawa ko matsar da eriya mai karɓa.
- Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
- Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
- Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.
Takardu / Albarkatu
 | A4030-E Reader |
Magana
- axis.comaxis.com
- axis.com/learningaxis.com
- axis.com/patentaxis.com
- axis.com/security-notification-serviceaxis.com
- axis.com/supportaxis.com
- axis.com/vulnerability-axis.com
- axis.com/ garantiaxis.com
- help.axis.com/axis-a4030-eAXIStaimako.axis.com
- axis.com/about-axis/cybersecuritywww.axis.com
- Manual mai amfanimanual.tools