Mai karanta RFID
Bambance-bambancen Rufe:
M/N: 12115-610, M/N: 12115-620, M/N: 12115-601, M/N: 12115-611
M/N: 12115-x1y1z1
Manual aiki
Mai karanta RFID
1 “x”, “y” da “z” za su wakilci kowace lamba ta haruffa ko kuma suna iya zama fanko.
Mai karantawa/Marubuci “12115-XYZ” Desktop ne mara waya mai wayo katin USB & Fasaha mara waya ta Bluetooth Mai karanta kati mai wayo da marubuci wanda ya haɗa fasahar katin mai girma da ƙasa. Yana goyan bayan Mifare, ISO 14443A/B, da ka'idodin ISO 15693 da kuma duk manyan masu watsawa na tushen 125kHz. Na zaɓi kuma yana da ƙirar RS232. Dangane da ainihin fasahar BALTECH tana ba da tallafi ga sabbin fasahohin smartcard, ɓoyewa, da fasalulluka na tsaro.
Hawa da Haɗuwa
Mai karatu yana samar da filin maganadisu a 13.56MHz, 125 kHz, da 2.4 GHz wanda duk wani abu mai sarrafa wutar lantarki na kusa da na'urar zai iya rinjayarsa.
Don tabbatar da kyawawan ayyuka da ayyuka dangane da kewayon karatu da aminci ana buƙatar mafi ƙarancin nisa na 10cm daga irin waɗannan kayan. Hana naúrar kai tsaye zuwa ƙarfe zai haifar da raguwa mai ƙarfi na kewayon karatu ƙasa zuwa aikin sifili. Ya kamata a kula yayin gwada na'urar bayan hawa a cikin yanayi mai matsala: Adadin karatu da aiki sun bambanta daga kati zuwa kati kuma sosai daga kati zuwa tag ko key-fob. Lokacin hawa masu karatu da yawa, nisa tsakanin masu karatu yakamata ya zama mafi ƙarancin 0.5 m don gujewa lalata aikin saboda tsangwama. Don haɗa na'urar zuwa tsarin runduna (firintoci ko PC), da fatan za a tabbatar cewa tsarin yana samar da soket na USB wanda aka yi niyya don haɗin mai karatu.
Aiki
Duk lokacin da aka haɗa na'urar zuwa wutar lantarki da ta dace, za ta kunna eriya ta ciki kuma ta duba katin lokaci-lokaci. Da zarar an gano kati, ana karanta lambar katin, kuma ana canza bayanan kuma a aika zuwa tsarin mai masauki ta hanyar kebul/RS232 (wanda ya dogara da samfurin). Don kunna na'urar don karanta katunan, tags, da maɓallin maɓalli cikin nasara, yakamata a sanya su a tsakiya sama da mai karatu. Ana amfani da na'urar don ganowa, da sarrafa shiga.
Fasalolin Fasaha
| Mitar Aiki | •0.125MHz •13.56MHz •2402MHz-2480MHz |
| Mai karanta tsarin watsa bayanai zuwa katin: | TAMBAYA |
| Katin watsa bayanai zuwa mai karatu: | AM/Load modulation |
| Hanyoyin sadarwa | USB: Cikakken gudun 2.0, RS 232, Bluetooth 5.2 |
| Katin mara lamba | Ƙididdiga masu goyan baya: IS014443 A & B, IS015693, Saurin sadarwa IS014443A/B: Ƙimar Baud har zuwa 424kBaud |
| Range Aiki | •IS014443A/B: har zuwa 5cm •IS015693: har zuwa 8cm •125kHz: har zuwa 6cm • Fasaha mara waya ta Bluetooth: har zuwa 10m |
| Mutum | Red, Green, Blue LEDs & Buzzer |
| Ƙarfin Ƙarfafawa [Voc] | +5V (± 5%) |
| Amfanin Wuta [W] | Har zuwa 1.5 / 1 tsp. |
| Yanayin Aiki [°C] | -20 zuwa +65 |
| Humidity Mai Aiki [%] | 20 zuwa 80 dangi zafi; mara tari |
| Humidity mara Aiki [%] | 10 zuwa 90 dangi zafi; mara tari |
| Antenna | • 2.4GHz eriyar Chip na ciki • 125kHz eriyar coil na dindindin •13.56MHz yana haɗa eriyar madauki na PCB |
| Zagayen aiki don amfanin al'ada aiki [ 6 minutes time taga ] |
Yi amfani da lokaci 1 a cikin mintuna 6. Yin hulɗa tare da mai amfani shine daƙiƙa 10 a kusa da na'urar. • Zagayen Ayyuka = (1 x Los)/ 6 min = 2,78 |
Pinning
Mai karatu yana goyan bayan haɗin kebul na USB.
| Kebul Interface Molex Header (finai 4) Lambar Sashe na Molex: 53261-0471 |
|||
| Fil # | Suna | Nau'in | Bayani |
| 1 | PWR | Ƙarfi | 5V Wutar Lantarki |
| 2 | D- | Bayanai | USB-Bayanan da aka juya |
| 3 | D+ | Bayanai | USB-Data |
| 4 | GND | Ƙarfi | Sigina da Ƙarfin Ƙarfi |
Gabaɗayan ƙa'idodi na ƙa'ida don 12115-610
FCC ID: OKY12115610A01A
Saukewa: 7657A-12115610
Ya ƙunshi ID na FCC: QOQ-BGM220S
Ya ƙunshi IC: 5123A-BGM220S
SANARWA:
Wannan na'urar ta bi Sashe na 15 na Dokokin FCC kuma tare da ma'auni(s) na RSS-keɓancewar lasisin masana'antu Kanada.
Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
- wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma
- dole ne wannan na'urar ta karɓi duk wani tsangwama da aka samu, gami da tsangwama wanda zai iya haifar da aiki maras so.
Canje-canje ko gyare-gyare da aka yi wa wannan kayan aikin wanda BALTECH AG ba ta amince da shi ba na iya ɓata izinin FCC don sarrafa wannan kayan aikin.
NOTE: An gwada wannan kayan aikin kuma an same shi don yin aiki da iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na Dokokin FCC. An ƙirƙira waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifarwa, amfani, kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma ana amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:
- Sake daidaitawa ko matsar da eriya mai karɓa.
- Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
- Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
- Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.
BINCIKE 1.0, 2022-09-09
BALTECH AG girma
Lilienthalstrasse 27
85399 Hallbergmoos
Jamus
Waya: +49 (811) 99 88 1- 0
FAX: +49 (811) 99 88 1- 11
e-mail: info@baltech.de
http://www.baltech.de/
Takardu / Albarkatu
 | Mai karanta RFID |
Magana
- mailto:info@baltech.debaltech.de
- Baltech AG | Daidaitaccen Fasahawww.baltech.de
- Manual mai amfanimanual.tools