BAPI Stat Quantum Wireless Room Wireless Room Temperature Sensor Umarnin Jagoran

Sensor mara waya ta BAPI-Stat “Quantum” yana auna zafin dakin ko zafin jiki/danshi kuma yana watsa bayanai ta Bluetooth Low Energy zuwa mai karɓa ko ƙofa. Ana samunsa tare da zaɓin saiti na zafin jiki da tsallakewar zama.

Saituna masu daidaitawa

Na'urorin mara waya ta BAPI suna da saitunan da yawa waɗanda za a iya daidaita su don dacewa da buƙatun shigarwa. Ana saita duk saituna ta hanyar ƙofa ko mai karɓa. (Duba ƙofa ko takaddun umarnin mai karɓa da ke kan BAPI webshafin don ƙarin bayani kan daidaita saitunan.)

Sample Rate/Tazara – Lokacin tsakanin lokacin da firikwensin ya tashi ya ɗauki karatu. Ƙimar da ake samu sune 10 seconds, 30 seconds, 1 min, 3 min ko 5 min tare da ƙofar, ko 30 s, 1 min, 3 min ko 5 min tare da mai karɓa.

Yawan Watsawa/Tazara - Lokacin tsakanin lokacin da firikwensin ke watsa karatun zuwa ƙofar ko mai karɓa. Ƙididdiga masu samuwa sune 30 seconds, 1, 2, 3, 4, 5, 10, 15, 20 ko 30 minutes, ko 1, 6 ko 12 hours tare da ƙofar, ko 1, 5, 10 ko 30 minutes tare da mai karɓa.

Delta Δ Zazzabi – Canjin zafin jiki tsakanin sample tazara wanda zai sa firikwensin ya ƙetare tazarar watsawa kuma ya watsa canjin yanayin zafi a s na gaba.ampda tazara. Ƙididdiga masu samuwa sune 0.1, 0.2, 0.3, 0.4, 0.5, 1, 2, 3, 4, 5 °F ko °C tare da ƙofar, da 1 ko 3 °F ko °C tare da mai karɓa.

Delta Δ Humidity – Canjin zafi tsakanin sample tazara wanda zai sa firikwensin ya ƙetare tazarar watsawa kuma ya watsa canjin zafi a s na gaba.ampda tazara. Ƙididdiga masu samuwa sune 0.5, 1, 2, 3, 4 ko 5 % RH tare da ƙofa, da 3 ko 5 % RH tare da mai karɓa.

Zazzabi Min/Max - Matsakaicin matsakaici ko mafi ƙarancin zafin jiki wanda zai sa firikwensin ya ƙetare tazarar watsawa kuma nan da nan ya aika karatu zuwa ƙofar. (Sai dai ana samun lokacin amfani da ƙofa.)

Yanayin Zazzabi - Yana daidaita ƙimar zafin da ake watsawa don dacewa da na'urar tantancewa. Ƙididdiga masu samuwa sune ± 0.1, 0.2, 0.5, 1, 2, 3, 4 ko 5 °F ko °C. (Sai dai ana samun lokacin amfani da ƙofa.)

Humidity Offset - Yana daidaita ƙimar zafi da ake watsawa don dacewa da na'urar tantancewa. Ƙimar da ke akwai sune ± 0.5, 1, 2, 3 ko 5% RH. (Sai dai ana samun lokacin amfani da ƙofa.)

Mai karɓa mai alaƙa ko Ƙofa

RECEIVER (Wireless-to-Analog)

Mai karɓar mara waya daga BAPI yana karɓar bayanai daga ɗaya ko fiye da na'urori masu auna waya. Bayan haka ana canjawa da bayanan zuwa na'urorin fitarwa na analog kuma a juye su zuwa analog voltage ko juriya. Mai karɓa yana goyan bayan na'urori masu auna firikwensin 32 kuma har zuwa 127 nau'ikan fitarwa na analog daban-daban.

Mai karɓa tare da Modulolin Fitar Analog

GATEWAY

Ƙofar mara waya daga BAPI tana karɓar bayanai daga ɗaya ko fiye da na'urori masu auna waya. Ƙofar ta ba da bayanan ga gajimare ta hanyar MQTT. Ƙofar kuma tana aika siginar tabbatarwa ga kowane firikwensin a kan nasarar karɓar bayanai. Ƙofar tana goyan bayan firikwensin 32.

Gateway

Duba Jagoran Farawa Mai Saurin Waya mara waya ta BAPI, ko ƙofa ko takaddun umarnin mai karɓa da ke kan BAPI website don kafa sadarwa tsakanin firikwensin da ƙofa ko mai karɓa.

Kunnawar farko

Don saukakawa, BAPI yana ba da shawarar haɗa firikwensin zuwa mai karɓa ko ƙofar da aka yi niyya kafin hawa kowace na'ura. Duk na'urorin biyu suna buƙatar a kunna su don haɗawa. Duba littafin shigar da mai karɓa ko ƙofa don umarni akan haɗa firikwensin.

Rukunin Ƙarfin Baturi

Naúrar ta zo da batura biyu da aka riga aka shigar. Don kunna naúrar, cire farantin tushe kuma cire shafuka biyu na insulator na baturi kamar yadda aka nuna a cikin siffa 2. Danna maɓallin Sabis kuma LED ɗin Sabis ya kamata yayi haske sau ɗaya don tabbatar da iko. Idan ba za a yi aikin firikwensin ba fiye da kwanaki biyu, BAPI tana ba da shawarar sake shigar da shafukan insulator guda biyu don adana rayuwar baturi.

Siffa 2: Cire shafin insulator na baturi

Wuraren Wutar Wuta

Raka'o'in wutar lantarki masu waya suna da shingen tashar wuta kusa da saman tsakiyar rukunin. Don kunna naúrar, yi amfani da 9 zuwa 30 VDC (50 mA max) ko 15 zuwa 28 VAC (50 mA max) kamar yadda aka nuna a cikin siffa 3. Danna maɓallin Sabis kuma LED ɗin Sabis ya kamata ya haskaka sau ɗaya don tabbatar da iko.

Siffa 3: Ƙarfin da aka yi amfani da shi a kan toshe tasha

Drywall Dutsen

Sanya farantin tushe a tsaye a jikin bangon inda kake son hawa firikwensin kuma yi alama ramukan hawa biyu.
Hana ramuka biyu 3/16 ″ (4.8mm) a tsakiyar kowane rami mai alama. Saka anka busasshen bango cikin kowane rami.

Aminta tushe zuwa ga anka busasshen bango ta amfani da #6 x 1 ″ (25mm) na hawa da aka bayar.
Haɗa Murfin ta hanyar ɗaure shi zuwa saman tushe, juya murfin ƙasa kuma ɗauka a cikin wuri. Tsare murfin ta hanyar goyan bayan dunƙule-ƙasa ta amfani da 1/16 ″ (1.6mm) Allen wrench har sai an jera shi da ƙasan murfin.

Siffa 4: BAPI-Stat “Quantum” Hawan

Cover Lockdown Screw 1/16 Allen

Aiki

Ƙaddamar da naúrar kamar yadda aka bayyana a sashin "Kunna Farko". Bi umarnin ƙofa ko mai karɓa don haɗa naúrar da canza saitunan daidaitacce. (Ana samun umarnin akan BAPI webshafin.)

Siffa 5:
Batir da aka Ƙarfafa BAPI-Stat “Quantum” Board Circuit tare da zaɓi na zaɓi & sokewa
(Ayyukan iri ɗaya ne ga na'urorin wutar lantarki.)

Danna maɓallin Gyara na zaɓi na zaɓi nan da nan yana aika sigina ta soke cewa an mamaye ɗakin.
Danna maɓallin "Service" akan allon kewayawa zai tilasta watsawa.

Alamar adireshin MAC
Matsar da zaɓin Setpoint Slider yana ƙaruwa ko rage ma'aunin zafin jiki.
Koren LED yana walƙiya lokacin da aka danna maɓallin "Sabis" ko yayin aikin haɗin gwiwa.

Sake saitin Sensor mara waya

Na'urori masu auna firikwensin sun kasance suna haɗe zuwa ƙofa ko mai karɓa da samfuran fitarwa lokacin da aka katse wuta ko an cire batura. Don karya haɗin gwiwa tsakanin su, ana buƙatar sake saita na'urori masu auna firikwensin. Don yin wannan, danna kuma ka riƙe maɓallin "Sabis" akan firikwensin na kimanin daƙiƙa 30. A cikin waɗancan daƙiƙa 30, koren LED ɗin zai kasance a kashe na kusan daƙiƙa 5, sannan yayi walƙiya a hankali, sannan ya fara walƙiya da sauri. Lokacin da saurin walƙiya ya tsaya, sake saitin ya cika. Ana iya haɗa firikwensin yanzu zuwa sabon mai karɓa ko ƙofa. Don sake haɗawa zuwa mai karɓa ɗaya ko ƙofa, dole ne ka sake saita mai karɓa ko ƙofa. Abubuwan fitarwa waɗanda aka haɗa a baya zuwa firikwensin baya buƙatar sake haɗa su.

Waƙwalwar Waka

Sensor yana riƙe da karatu har zuwa 16,000 idan sadarwar ta katse. Na'urar firikwensin kawai tana adana karatu daga watsawar da aka rasa kuma kawai lokacin da aka haɗa firikwensin zuwa ƙofa. Da zarar an sake kafa sadarwa tare da ƙofa, ana watsa karatun da aka adana sannan a goge daga firikwensin. Ana aika karatun na yanzu da karatuttuka tara da suka gabata a kowane tazarar watsawa har sai an kama firikwensin.

Madadin Baturi

Cire murfin daga farantin tushe ta hanyar juyawa cikin kulle kulle murfin tare da 1/16 ″ (1.6mm) Allen wrench har sai an iya cire murfin.
Cire batirin da aka yi amfani da su daga masu riƙe su kuma a jefar da su a cikin yanayin tsaro.. Maye gurbin da sababbin batura a daidai yanayin daidaitawa (Fig 6).

Haɗa Murfin ta hanyar ɗaure shi zuwa saman tushe, juya murfin ƙasa kuma ɗauka a cikin wuri. Tsare murfin ta hanyar goyan bayan dunƙule-ƙasa ta amfani da 1/16 ″ (1.6mm) Allen wrench har sai an jera shi da ƙasan murfin.

Ƙayyadaddun baturi:
Batirin Lithium 3.6V guda biyu: (#14505, 14500 ko makamancin haka)

Siffa 6: Sauya baturi

Bincike

Matsaloli masu yiwuwa:
Sensor baya sadarwa tare da ƙofa ko mai karɓa, ko ƙimar da aka watsa ba daidai bane.

Mahimman Magani:
Tabbatar cewa firikwensin yana tsakanin kewayon ƙofa ko mai karɓa.

Tabbatar cewa koren LED akan allon kewayawa na firikwensin yana walƙiya lokacin da aka danna maɓallin "Sabis", yana nuna watsawa. Idan bai yi walƙiya ba, maye gurbin batura.

Tabbatar cewa firikwensin yana haɗe da kyau zuwa ƙofa ko mai karɓa da na'urorin fitarwa na analog kamar yadda aka bayyana a cikin ƙofa ko umarnin mai karɓa da ke kan BAPI website. Sake haɗa su idan an buƙata. Idan ya cancanta, aiwatar da hanyar "Sake saitin Sensor Mara waya" a shafi na 3.

Ƙayyadaddun bayanai

Ikon Baturi:
Biyu sun haɗa da 3.6V 14505, 14500 ko equiv. batirin lithium
(Lura: Standard AA batura ba su dace ba)

Ƙarfin Waya: 9 zuwa 30 VDC ko 24 VAC, an gyara rabin igiyar ruwa

Daidaiton Sensor:
Zazzabi: ± 1.7°F (0.95°C) daga 32 zuwa 158°F (0 zuwa 70°C)
Lashi: ± 2% RH @ 77°F (25°C), 20 zuwa 80% RH

Matsayin Zazzabi: -4 zuwa 221F (-20 zuwa 105°C)

Nisan Watsawa: Ya bambanta ta hanyar aikace-aikacen*

Rage Ayyukan Muhalli:
Zazzabi: -4 zuwa 149°F (-20 zuwa 65°C)
Humidity: 10 zuwa 90% RH mara sanyaya

Kayayyakin Rufe & Ƙididdiga: ABS Filastik, UL94 V-0

Mitar: 2.4GHz (Bluetooth Low Energy)

Hankalin mai karɓa: -97 dBm

Saitunan Mai Amfani:
Delta T (Temp): 0.1°F/C zuwa 5.0°F/C
Delta T (Humidity): 0.1% RH zuwa 5.0% RH
Tazarar watsawa: 30 seconds zuwa 12 hours
Sample Tazarar: 10 seconds zuwa 5 min
Wutar Wuta: ±0.1°F/C zuwa ±5.0°F/C
Ƙimar Humidity: ± 0.1% RH zuwa ± 3.0% RH

Ƙwaƙwalwar Wuta:
Sensor yana riƙe da karatu har zuwa 16,000 idan sadarwar ta katse. Idan ana amfani da Ƙofar Kofa, ana sake watsa bayanan da zarar an sake kafa hanyar sadarwa.

Hukumar: RoHS

* Kewayon ginin ya dogara da toshewa kamar kayan daki da bango da yawa na waɗannan kayan. A cikin buɗaɗɗen wurare, nisa na iya zama mafi girma; a cikin manyan wurare, nisa na iya zama ƙasa da ƙasa.

** Rayuwar baturi ta haƙiƙa ta dogara da saitunan firikwensin daidaitacce da yanayin muhalli.

Standard Dutsen Tushen

Kumfa Cell Rufe

60mm Dutsen Tushen
(Ya dace da akwatunan bangon Turai da akwatunan haɗin gwiwa tare da cibiyoyin hawan 60mm)

Kumfa Cell Rufe

Rayuwar Batir da Aka Ƙirƙira**
Canza Tazara	Sampda Rate	Kiyasta Rayuwa (shekaru)
dakika 30	dakika 30	1.12
1 min	1 min	1.89
3 min	1 min	3.83
5 min	5 min	7.08
10 min	5 min	8.93

Ƙayyadaddun ƙayyadaddun bayanai suna canzawa ba tare da sanarwa ba.

Building Automation Products, Inc., 750 North Royal Avenue, Gays Mills, WI 54631 Amurka
Tel: +1-608-735-4800 • Fax+1-608-735-4804 • Imel:sales@bapihvac.com • Web:www.bapihvac.com

Takardu / Albarkatu

BAPI Stat Quantum Wireless Daki Sensor [pdf] Jagoran Jagora
Ma'aunin zafin jiki na daki na Stat Wireless, Sensor Ma'aunin zafin jiki, Ma'aunin zafin jiki, Sensor, Sensor

Magana

Manual mai amfani

BAPI-Stat “Quantum” Wutar Daki mara waya ko Zazzabi/Ma'aunin zafi

Shigarwa & Ayyuka

Ƙarsheview da kuma Identification