BASTL INSTRUMENTS MIDI LOOPER Clockface Modular

Ƙayyadaddun bayanai

• Na'ura: Midilooper
• Shafin: 1.1
• Yawan Muryoyi: 3
• Saƙonnin MIDI masu goyan bayan: Note, CC, Pitch Bend, Aftertouch
• Fasaloli: Looping, Sauyawa, Gudanar da Sauri, Ƙidaya, Shuffle, Humanization, Aiki tare da agogo

GABATARWA

Midilooper wata na'ura ce da ke sauraron saƙonnin MIDI ( sarrafa bayanai game da bayanin kula, kuzari da sauran sigogi) da kuma sanya su madaukai ta hanyar irin wannan madauki mai jiwuwa zai madauki guda na sauti. Duk da haka, madaukai na saƙonnin MIDI sun kasance a cikin yankin sarrafawa, wanda ke nufin yawancin wasu matakai na iya faruwa a saman su - gyaran fuska na timbre, gyare-gyaren ambulaf da dai sauransu Tunda looping yana daya daga cikin mafi sauri kuma mafi yawan hanyoyin da ake yin kiɗa, mun sanya ikon Midilooper da sauri don ƙarfafa kwararar da ba ta katsewa. Ana iya aiki tare da Midilooper ko dai ta agogon MIDI ko agogon analog, ko kuma yana iya aiki da agogon nasa (matsa ɗan lokaci/guɗin kyauta). Midilooper yana da muryoyi 3 waɗanda kowannensu za a iya sanya shi zuwa tashar MIDI daban-daban, yana ba shi damar sarrafawa da madauki guda 3 na kayan aiki daban-daban. Kowace murya za a iya yin rikodi ɗaya ɗaya, ɓatacce, ƙorafi, ko sharewa. Midilooper kuma yana ba da wasu mahimman sarrafa bayanan da aka yi rikodi: juyawa, kulle saurin gudu da juyawa, ƙididdigewa, shuffle, ɗan adam (bambancin saurin gudu), daidaita tsayin madauki, ko ninka da rage saurin sake kunnawa.
Bugu da ƙari, yana fasalta CV kuma yana haifar da abubuwan shiga don haɗawa tare da daidaitawar synths: sake saiti, sake kunnawa, saurin gudu, da watsawa. Hakanan za'a iya sarrafa shi ta hanyar haɗa ƙafar ƙafa.

MIDI LOOPER V 1.0 GANE KUMA YA RUBUTA WADANNAN IRI NA SAKO:

YANA KARANTA KUMA YANA FASSARAR SAKONNIN LOKACI (BA SU DA CHANNEL MIDI)

SANTAWA
Midilooper yana sauraron duk tashoshi na MIDI kuma yana tura saƙon MIDI akan tashar MIDI da aka ba wa zaɓin murya. Yi amfani da maɓallan A, B, C don zaɓar murya.

HADIN FARKO

1. Haɗa kowane madannai ko mai sarrafawa wanda ke fitar da MIDI zuwa shigar da MIDI na Midilooper.
2. Haɗa MIDI Daga Midilooper zuwa kowane nau'in synth ko tsarin sauti wanda ke karɓar MIDI.
3. (na zaɓi) Haɗa MIDI Out 2 na Midilooper zuwa wani synth 4 Haɗa wutar USB zuwa Midilooper

NASIHA: DOMIN GANIN KO KANA KARBAR BAYANIN MIDI DOMIN FARKO A KAN NUNA ZATA KIRKI (KAWAI LOKACIN DA AKA TSAYA DAN WASA).

SATA CHANNEL MIDI

Ya kamata ku sani
A cikin haɗin maɓalli waɗannan maɓallan suna aiki azaman kibiyoyi:

• REC = UP
• WASA/TSAYA = KASA

Maɓallan murya A, B, da C zaɓi muryar. Zaɓi murya A ta latsa maɓallin kuma saita tashar MIDI mai fitarwa ta hanyar riƙe FN+A+UP/DOWN. Nunin zai nuna lambar tashar MIDI. Saita tashar shigar da MIDI akan synth ɗin ku zuwa tashar guda ɗaya.
Idan an yi daidai, kunna bayanin kula akan madannai ya kamata ya kunna waɗannan bayanan akan synth ɗin ku. Idan ba haka ba, duba haɗin kai, wutar lantarki da saitunan tashar MIDI akan duka Midilooper, da synth ɗin ku. Bi wannan hanya don saita murya B da C.
NASIHA: A WANNAN WURI ZAKU IYA SO A KARA TSAYEN OCTAVE OFFSET A CIKIN SAUTUKANKU (KOWANE SYNTH DA KUKE SO AYI WASA A WASA DABAN OCTAVE).
DOMIN YI HAKAN, LATSA FN+TRANSPOSE+VOICE+UP/down

Ana samun martanin MIDI?
Amsar MIDI na iya faruwa a wasu synths lokacin amfani da MIDI A da MIDI Out akan synth. Gwada kashe MIDI Thru da Ikon gida akan synth. Idan ba za ku iya ko ba ku son yin wasu daga cikin waɗannan za ku iya kunna matatar amsa ta MIDI akan Midilooper. Yayin zabar tashar MIDI akan muryar da ke amsawa, danna maɓallin CLEAR. Wannan zai kunna MIDI FEEDBACK FILTER ko kuma a wasu kalmomi: musaki sake kunnawa kai tsaye a waccan tasha, kuma abin da aka matse kawai zai kunna baya. Canza zuwa kowane tashar MIDI zai sake saita wannan fasalin zuwa yanayin sa na farko.

HADE KA ZABI MAJALISAR ARKON KA

Akwai zaɓuɓɓuka da yawa na clocking Midilooper.
Kuna iya zaɓar tushen agogo ta FN+PLAY/STOP. Zaɓen yana kewayawa cikin tsari mai zuwa:

1. Agogon MIDI akan Input MIDI (kibiya mai nuni ga MIDI In)
2. Agogon analog akan shigar da agogo (REC LED Kunna)*
3. Agogon MIDI akan Input Clock (REC LED kyaftawa) - kuna iya buƙatar MIDI zuwa adaftar jack don amfani da wannan zaɓi ***
4. Matsa ɗan lokaci (Clear LED Kunnawa) - saitin lokaci ta FN+CLEAR = TAP
5. Gudun kyauta (Clear LED kiftawa) - babu agogo da ake buƙata! An saita ɗan lokaci ta tsawon rikodi na farko (kamar yadda yake tare da madaukai masu jiwuwa)
6. USB Midi - nuni yana cewa UB da LENGTH Led suna haskakawa

* Idan kuna amfani da agogon analog, kuna iya daidaita DIVIDER.
** Hattara cewa akwai nau'ikan madaidaicin mahaɗin MIDI (5pin DIN) zuwa 3,5mm (⅛ inch) TRS MIDI jacks adaftar akan kasuwa. Bambance-bambancen sun haɓaka yayin wani lokaci kafin daidaitawar ƙaramin jack MIDI (kusan tsakiyar 2018).

Muna bin ƙa'idar da aka ƙayyade ta midi.org.
NASIHA: DOMIN GANIN KO Agogon ku yana Aiki, ZAKU IYA KIYAYE DOKOKI NA BIYU AKAN NUNA YAYIN DA AKE TSAYA DAN WASA.

KARIN HANYOYI
Metronome Out - fitowar metronome na belun kunne. Sake saitin ciki - yana sa Midilooper ya tafi mataki na farko. CVs ko Pedals – Abubuwan shigar jack 3 waɗanda za a iya amfani da su azaman abubuwan shigar CV ko azaman abubuwan shigar da feda don sarrafa ƙirar Midilooper. CVs na iya rinjayar murya ɗaya, biyu ko duka. Don zaɓar idan CV yana aiki don murya ka riƙe maɓallin murya na tsawon daƙiƙa 5 sannan yi amfani da:

• Maɓallin QUANTIZE don kunna maɓallin RETRIGGER VELOCITY don kunna maɓallin VELOCITY CV TRANSPOSE zuwa TRANSPOSE CV mai aiki.
• Idan babu ɗayan muryoyin da aka saita don karɓar CV akan waccan jack ɗin, jack ɗin zai yi aiki azaman shigarwar feda.
• Shigar da RETRIGGER zai yi aiki azaman maɓallin RECORD shigar da VELOCITY zai yi aiki azaman maɓallin CLEAR TRANSPOSE shigarwar zai zagaya ta cikin muryoyin.

NASIHA: ZAKU IYA HADA DUK WATA FEDERAL NA DOMIN SAMUN MALAMAI RUBUTU, SHEKARU KO ZABIN MURYA. KANA BUKATAR YI AMFANI DA ADAPTER DOMIN SAMUN SHI 3.5MM ( ”) Madadin MATSALAR 6.3MM (¼”) .KAMAR DA SAMUN SAMUN SAMUN TSAKANIN GINDI DA HANNU. HAR ANA IYA GINA FEDERAL NA KANKU TA HANYAR DORA KOWANE LAMBAR BUTON TSAKANIN TIP DA SANNU NA JACK CONNECTOR.
KAWAI YANA GANO LAMBAR TIP-SleeVE.

KARIN HANYOYI
Haɗa Midilooper zuwa kwamfutarka tare da kebul na USB kuma nemi ta a cikin na'urorin Midi ɗin ku. Na'urar USB Midi ce mai dacewa da aji don haka ba zata buƙaci direbobi akan yawancin kwamfutoci ba. Yi amfani da USB azaman shigarwa don Midilooper don madauki, yi amfani da shi don daidaita Midilooper.
Midilooper kuma yana nuna kayan aikin sa zuwa kebul don haka zaku iya kunna synths na software na ku.
NOTE: MIDILOOPER BA HOST NA USB BANE BA ZA KA IYA SAKA A CIKIN MIDI MAI SAMUN USB A CIKIN MIDILOOPER. USB MIDI NUFIN MIDILOOPER ZAI NUNA A MATSAYIN NA'URAR MIDI A COMPUTER KA.

LOOPING

RUBUTA MUDUN FARKO
Latsa maɓallin RECORD don "hannu" rikodi. Za a fara rikodin da MIDI Note na farko da aka karɓa ko da zaran ka danna maɓallin PLAY/STOP.
Don gama madauki danna maɓallin RECORD kuma a ƙarshen jumlar. Yanzu LENGTH LED zai haskaka kore don nuna kun kafa tsayin madauki. Tsawon yana kafa kansa ta atomatik don duk muryoyin.
Kuna iya canza tsayi ga kowace murya daban-daban, ko amfani da aikin CLEAR don kafa tsayi ta yin rikodi (duba gaba).

KYAUTA / RUBUTU
Da zarar an gama rikodin farko za ka iya ko dai canza murya ka yi rikodin madauki don kayan aiki daban, ko kuma za ka iya ƙara yadudduka zuwa murya ɗaya. Yin rikodi tare da sauyawa a yanayin OVERDUB zai ci gaba da ƙara sabbin yadudduka. Koyaya, a yanayin VERWRITE, kayan da aka yi rikodi na farko za a goge su da zarar an riƙe aƙalla bayanin kula guda ɗaya kuma an yi rikodi.

Gogewa
Yi amfani da maɓallin ERASE yayin sake kunnawa don share bayanan da aka yi rikodi kawai yayin da maɓallin ERASE ke riƙe. Yana aiki don zaɓaɓɓen muryar.

SHAFE MAƊAKI DA YIN SABON
Don share madauki na muryar da aka zaɓa danna maɓallin CLEAR sau ɗaya. Wannan zai share duk abubuwan da aka yi rikodi, yayin da kuma sake saita tsayin madauki. Har ila yau, aikin sharewa zai "hannu" rikodi.
Danna maɓallin CLEAR sau biyu don share duk muryoyin, sake saita tsayin madauki, dakatar da mai kunnawa da hannu rikodin. Wannan macro zai shirya Midilooper don sabon madauki a cikin motsi ɗaya.

TSARI MAI KYAUTA

MUTU
Riƙe maɓallin CLEAR kuma danna maɓallan murya ɗaya don YI SAUTE da cire muryoyin.

ZABEN MAFARKI
Madaukai da aka yi rikodi don duk muryoyin 3 tsari ne. Don canjawa tsakanin alamu 12 daban-daban, riƙe maɓallin PLAY kuma danna maɓallin murya ɗaya don zaɓar ɗaya daga cikin alamu uku. Akwai rukunoni huɗu na ƙira uku kuma don samun damar ƙungiyoyin ƙirar daban danna ɗayan ƙananan maɓalli huɗu (LENGTH, QUANTIZE, VELOCITY, TRANSPOSE) yayin da kuke riƙe maɓallin PLAY.

KASASHEN TSIRA
Don ajiye duk alamu latsa FN+REC. Ana adana alamu tare da waɗannan saitunan: ƙididdigewa, shuffle, ɗan adam, saurin gudu, tsayi, shimfiɗa. Ana ajiye duk sauran saitunan duniya ta atomatik (zabin agogo, tashoshin MIDI da sauransu)

KASHE
Riƙe CLEAR da latsa maɓallin REC tsakanin Kuskure na UNdo ko REdo na iya faruwa kuma idan sun yi akwai Gyara ɗaya don ceton ku. Murke mayar da sabon aikin. Ko yin rikodi, sharewa ko gogewa. REdo zai sake mirgine sabuwar UNdo don ku iya amfani da wannan fasalin da ƙirƙira. Domin misaliampdon ƙara sabon overdub Layer cire shi kuma ƙara shi kuma.

gyaggyarawa madaukai

TSORO
Za'a iya canza GAGARUMIN madauki ko dai a duniya: TSORO+UPA/KASA ko kowace murya: TSORO+VOICE+UPA/KASA. Nuni zai nuna tsawon lokacin madauki (a cikin bugun). Daidaita Tsawon zai canza a cikin haɓakar 4 ta doke mashaya 1.
Don ƙara ƙarawa TAP kuma RIQE TSAYI + UP/KASA don canza Tsawon a cikin ƙarin +/- 1.
Yin rikodin madauki na farko koyaushe zai ƙididdige tsawon madauki zuwa mashaya (buga 4). Matsakaicin Rikodi na iya zama tsayi fiye da bugun 256. Nuni kawai ba zai iya nuna ƙarin lambobi fiye da haka ba. Danna LENGTH ba tare da an kafa madauki na farko ba
(A kashe haske mai tsawo) zai ɗauki Tsawon da aka yi amfani da shi na ƙarshe kuma ya saita shi.

KYAUTA

• Ana iya canza adadin QUANTIZE ko dai a duniya: QUANTIZE+UP/down ko kowace murya: QUANTIZE+VOICE+UP/down.
• Lambar da ke kan nuni tana wakiltar nau'in grid wanda za a ƙididdige abun da aka yi rikodi.

WURI

• Kunna VELOCITY zai tace saurin duk bayanan da aka yi rikodi kuma ya mai da shi a tsaye ƙima.
• Ana iya canza darajar VELOCITY ko dai a duk duniya: WURI+ UP/KASA, ko kowace murya: WUTA+VOICE+UP/KASA.
• Tukwici: Idan ka tafi da gudu a ƙasan “00” za ka samu zuwa “NO” don “na al’ada” ko “ba-canza” na gudu. Ta wannan hanyar, wasu muryoyin kawai za su iya shafar WUTA.

SAUKI

• A Yanayin Canjawa, ana iya jujjuya kayan da aka yi rikodi ta hanyar shigarwa kai tsaye akan madannai naka. Ana samun dama ga yanayin Transpose ta latsa maɓallin TRANSPOSE kuma a fita ta latsa kowane maɓallin murya.
• Don zaɓar waɗanne muryoyin da yanayin Canji ya shafa riƙe ƙasa TRANSPOSE kuma danna maɓallin murya don kunna/kashe tasirinta kowace murya.
• Juyawa zai yi amfani da ɗanɗano zuwa tushen bayanin kula. Don zaɓar tushen bayanin kula, riƙe maɓallin TRANSPOSE kuma kunna MIDI Note ta hanyar shigar da MIDI (DOTS zai haskaka nuni don nuna cewa an saita tushen bayanin).
• Lokacin da aka zaɓi tushen bayanin kula, latsa bayanin kula akan madannai zai kasance yana jujjuya kayan da aka yi rikodin don muryoyin da aka zaɓa dangane da tushen bayanin kula. Rubutun da aka danna na ƙarshe zai ci gaba da aiki.
• Fitar da yanayin Transpose zai cire fassarar amma za a tuna da tushen bayanin kula.
• NOTE: DOMIN SAMUN SAUKI DOMIN YI INGANCI A KALLA DAYAYA DAGA CIKIN SAUTINAN AKE BUKATAR KUNYA KUMA DOLE DOLE A ZABIN TUSHEN bayanin kula.

TSIRA

• Mikewa zai iya sanya madaukin da aka rikodi ya buga a kwata, na uku, rabi, sau biyu, sau uku ko sau huɗu.
• Latsa: FN+LENGTH+UP/KASA don canza shimfiɗa.
• Yana aiki ne kawai ga zaɓin muryar kuma zai zama aiki a lokacin da kuka saki maɓallan

SAUFI

• Shuffle yana ƙara jinkiri zuwa wasu bayanan kula na 16 don cimma tasirin lilo. Latsa: FN+QUANTIZE+UP/DOWN don daidaita adadin Shuffle.
• Kyawawan dabi'u suna jinkirta kowane bayanin kula na 16 na dakika ta hanyar saita kashitage don cimma tasirin lilo.
• Ƙididdiga mara kyau suna ƙara adadin jinkirin bazuwar lokaci ga duk saƙonnin MIDI da aka aika don samun ƙarin jin lokacin ɗan adam.
• Yana aiki ne kawai ga zaɓaɓɓen muryar kuma ana yin sa bayan ƙididdigewa.

DAN ADAM

• Humanize ba da gangan yana canza saurin bayanan MIDI da aka kunna ba.
• Yi: FN+VELOCITY+UP/down don saita adadi daban-daban na Humanize. Mafi girman adadin, yadda GUDU ɗin ke samun tasiri ba da gangan ba.
• Yana aiki ne kawai ga zaɓaɓɓen muryar kuma ana yin sa bayan ƙididdigewa.

SAMU

• Hakanan kuna iya ƙara madaidaicin octave a cikin muryoyin ku. Kowane synth na iya yin wasa a cikin octave daban-daban, ko kuna iya canza wannan da kyau.
• Yi: FN+TRANSPOSE+VOICE+UP/KASA don canza canjin Octave kowace murya.

MULKI NA WAJE

RETRIGGER
Shigar da Retrigger zai sake saita ambulan ta hanyar aika bayanin kula Kashe da bayanin kula a cikin tsari na gaba don ci gaba da bayanin kula da gajeriyar bayanin kula Kunna da Kashe bayanin kula don saitin bayanin kula na ƙarshe da aka kunna a legato. Wannan zai shafi duk bayanan da aka buga a cikin legato ko da bayan an fitar da su. "An yi wasa a cikin legato" yana nufin cewa idan dai kun ci gaba da rufe ƙarshen rubutu ɗaya tare da farkon wani, ko kuma har sai kun fitar da duk bayanin kula, Midilooper zai tuna duk waɗannan bayanan kula kamar yadda aka kunna a cikin legato. A taƙaice, idan kun kunna kuma ku saki ƙwanƙwasa sannan ku yi amfani da Retrigger - waɗannan bayanan za a sake kunna su. Ana iya amfani da Retrigger zuwa ɗaya, biyu, ko duk muryoyin.
Dubi Ƙarin Haɗin kai kan yadda ake sanya abubuwan shigar da CV.

VELOCITY CV
Shigarwar Velocity CV yana ƙara darajar Gudun abubuwan da aka kunna kai tsaye, mai rikodi ko bayanan da aka dawo da su. Ana iya amfani da wannan tare tare da fasalin Wuta ko kuma kawai don ƙara wasu lafazin zuwa wasu bayanan kula. Ana iya amfani da CV mai sauri zuwa ɗaya, biyu, ko duk muryoyin.
Dubi Ƙarin Haɗin kai kan yadda ake sanya abubuwan shigar da CV.

TRANSPOSE CV
Shigarwar Transpose CV yana ƙara darajar bayanin kula na kayan da aka yi rikodi. An daidaita shigarwar volt kowace octave. Ana iya amfani da wannan tare da fasalin Transpose ko Octave.
Ana iya amfani da Transpose CV zuwa ɗaya, biyu, ko duk muryoyin. Dubi Ƙarin Haɗin kai kan yadda ake sanya abubuwan shigar da CV.

Sake saitin
Shigar da Sake saitin zai sa Midilooper ya tafi matakin farko. Ba zai taka matakin ba, duk da haka. Agogon tushen agogon da aka zaɓa kawai zai kunna matakin farko.

RARRABA
Wannan zaɓin yana ba ku damar haɓaka / rage girman lokacin shigar ku daga shigarwar agogon analog. Latsa FN+ERASE+UP/down don canza mai rarrabawa. Agogon da aka fi sani shine kowane bayanin kula na 16, duk da haka, yana iya zama da sauri kamar bayanin kula na 32 ko a hankali kamar bayanin kula na 8 ko na 4. Nunin yana nuna lambar da aka zaɓa. Lokacin da aka zaɓi "01", mai kunnawa zai ci gaba ne kawai a kowane bugun bugun agogo na analog. Yi amfani da wannan zaɓin lokacin da kuke aiki tare da agogo mara daidaituwa.

NOTE: ANALOG clock is upscaled in CLOCK TO MIDI CLOCK (24 PPQN = PULSES per Quarter Note) DA KASANCEWAR RABEWA ZAI KARA SANYA HALIN QUANTIZE DA SAURAN GIDAN GIDAN TIME.
Duba Haɗa kuma zaɓi tushen agogon ku don ƙarin bayani.

SARAUTAR PEAL
Za a iya sarrafa mahaɗin mai amfani ta hanyar ƙafafu. Duba Ƙarin Haɗin kai kan yadda ake amfani da fedals na waje.

KYAUTA CCs DA KWANKWASOWA DA BAYA

Canjin Canjin Sarrafa da Pitch Bend da Aftertouch (tashar) saƙonnin za a iya yin rikodi da madauki kuma. Kamar yadda yake tare da Bayanan kula na MIDI, Midilooper zai saurari waɗannan akan duk tashoshi kuma ya tura su / kunna su kawai akan tashoshin da aka sanya wa muryoyinsa. Yanayin overdub/rubutu baya aiki ga waɗannan saƙonnin. Da zarar an karɓi CC na farko na wani lamba, Midilooper zai tuna lokacin da aka tweaked, kuma zai fara rikodin madauki na wannan lambar CC. Da zarar ya gama madauki ya zo wuri ɗaya a cikin madauki kamar CC na farko na wannan lambar, zai daina yin rikodin CC kuma zai fara sake kunnawa na ƙimar da aka rubuta. Bayan wannan batu, duk wani sabon isowar CC zai yi aiki azaman CC na farko kuma zai fara rikodin har sai an kai cikakken madauki.
Wannan yana aiki a layi daya da duk lambobin CC (sai dai CCs na musamman: fedal mai dorewa, duk bayanin kula da sauransu).

• NASIHA: WASA/TSAYA + CLEAR = KAWAI CCS GA ZABEN MURYA.
• Hankali na Pitch Bend da Aftertouch rikodin iri ɗaya ne da na CCs.

FIRMWARE KYAUTA

Ana nuna sigar firmware akan nuni a cikin firam guda biyu masu biyo baya lokacin da kuka fara na'urar. Idan an nuna shi azaman F1 sannan 0.0 karanta shi azaman Firmware 1.0.0 Ana iya samun sabuwar firmware anan: https://bastl-instruments.github.io/midilooper/ Don sabunta firmware bi wannan hanya:

1. Riƙe maɓallin saurin gudu yayin haɗa Midilooper zuwa kwamfutarka ta USB
2. Nunin yana nuna "UP" dangane da yanayin sabunta firmware, kuma MIDILOOPER zai nuna a matsayin DISC na waje akan kwamfutarka (na'urar ma'ajiyar taro)
3. Zazzage sabon fayil ɗin firmware (sunan fayil midilooper_mass_storage.uf2)
4. Kwafi wannan fayil ɗin zuwa faifan MIDILOOPER akan kwamfutarka (Mai saurin LED zai fara kiftawa don tabbatar da nasara)
5. Cire (kore) diski ɗin MIDILOOPER lafiya daga kwamfutarka, amma kar a cire haɗin kebul na USB!
6. latsa Maballin Sauri don fara sabunta firmware (LEDs ɗin da ke kusa da maɓallin Gudun za su yi kiftawa, kuma na'urar za ta fara da sabon firmware - duba sigar firmware akan nuni akan farawa).

MIDI SHAFIN AMBATON AIKI

• KARBAR
  • A duk tashoshi: Lura A kunne, Bayanin Kashe Pitch Bend CC (64= dorewa)
  • Saƙonnin yanayin tashoshi: Duk bayanin kula a kashe
  • Saƙonnin Lokaci na MIDI: Agogo, Fara, Tsaya, Ci gaba
• MULKI
  • Akan zaɓaɓɓun tashoshi: Lura A Kunna, Note Kashe Pitch Bend CC
  • Saƙonni na Gaskiya na MIDI: Agogo, Fara, Tsaya, Ci gaba
• MIDI TA
  • MIDI Thru na MIDI Saƙonni na Gaskiya - kawai lokacin da aka zaɓi agogon MIDI azaman tushen agogo.

SATA EXAMPDA 01
BABU WUTA KYAUTA - KYAUTA KYAUTA KYAUTA MIDI DAGA MIDI MIDI

SATA EXAMPDA 02
MIDI CLOCK LOOPING MIDI YA HAKA DAGA SAURAN KYAUTAR KAYAN SAURARA GA METRONOME A KAN BULUS

SATA EXAMPDA 03
AKA YI INGANTATTU ZUWA DA MIDI Agogon MIDI (VIA TRS Jack) MIDI MIDI DAGA MIDICONTROLLER MAI SAMUN MIDI TARE DA FOOTPEDALS.

SATA EXAMPDA 04
AKA YI KYAUTA ZUWA KYAUTA KYAUTA DAGA MIDI SYNTHESIZER MIDI DAGA SHIN BOARD SYNTH KE KULLA DA CVS DA ARZIKI DAGA KYAUTA SYNTH.

SATA EXAMPDA 05
MIDI Agogon USB MIDI DA AKE YIWA MIDI KYAUTA DAGA LAPTOP SAURAREN METRONOME AKAN BELULU.

Je zuwa www.bastl-instruments.com don ƙarin bayani da koyaswar bidiyo.

NOTE: WANNAN LITTAFI MAI KYAU YANA BIN HANYAR KOYARWA. Da fatan za a biye da shi yayin da kuke SAITA MIDILOOPER KUMA KA YI MUDUN FARKO.

FAQ's

Muryoyi nawa Midilooper ke tallafawa?

Midilooper yana goyan bayan muryoyin 3 waɗanda za'a iya sanya su zuwa tashoshi na MIDI daban-daban.

Shin Midilooper zai iya aiki tare da tushen agogo na waje?

Ee, Midilooper na iya aiki tare da agogon MIDI, agogon analog, ko gudanar da agogon kansa (matsa ɗan lokaci/gudu kyauta).

Wadanne nau'ikan saƙonnin MIDI ne Midilooper zai iya ganewa da yin rikodin?

Midilooper na iya ganewa da yin rikodin MIDI Note, MIDI CC, MIDI Pitch Bend, CCs na musamman, da MIDI Aftertouch saƙonnin.

Takardu / Albarkatu

BASTL INSTRUMENTS MIDI LOOPER Clockface Modular [pdf] Jagoran Jagora v1.1, MIDI LOOPER Clockface Modular, MIDI LOOPER, Clockface Modular, Modular

Magana

• Manual mai amfani