BrainChild QS0MCT1A MCT Multi Loop Controller
Ƙayyadaddun bayanai
- Samfura: MCT Ver: QS0MCT1A
- Nau'i: 1/4 DIN Multi-Madauki Mai Sarrafa
- Interface: Touch Screen
Umarnin Amfani da samfur
Sanya Sarrafa Tsari/Iyakaita Modules
- Zaɓi ramin don ƙirar kuma cire murfin ramin fanko.
- Saita maɓallin DIP akan tsarin don nau'in shigarwar da ake buƙata.
- Saka tsarin a cikin ramin kuma amintar dashi a wurin ta amfani da sukurori mai riƙewa.
Shigarwa da Haɗawa
- Yanke madaidaicin buɗaɗɗen buɗewa a cikin panel kuma saka mai sarrafa MCT ta hanyar yanke sashin gaba.
- Saka shafin mai lanƙwasa na maƙallan riƙewa zuwa madaidaitan ma'auni a cikin MCT kuma ƙara ƙarar sukurori daidai gwargwado don amintar da shi a wurin.
Haɗi da Waya
- Haɗa wayoyi na shigarwa/fitarwa zuwa na'urorin PCM/HLM da aka shigar suna bin sifofin haɗin da aka bayar.
- Haɗa MCT zuwa cibiyar sadarwa ko PC ta hanyar sadarwar sadarwar serial (na zaɓi).
Sanya MCT Don Amfani
Canja tsakanin Ayyukan Ayyuka/Hanyoyin Kanfigareshan kamar yadda ake buƙata don saitawa da daidaita MCT don amfani.
MCT - 1/4 DIN Multi-Madauki Mai Sarrafa A 1/4 DIN Multi-Madauki mai sarrafawa wanda ke aiki kamar wayar hannu ko kwamfutar hannu da kuka fi so.
Sauƙi don Amfani da Interface Touch Screen
- Bi matakai a cikin wannan jagorar farawa mai sauri don saitawa kuma fara amfani da mai sarrafa MCT ɗin ku.
An Shawarar Hardware
ToolsHardware Abubuwan Shawarwari
- Hardware
- PCM (modul sarrafa tsari)
- Lura: aƙalla 1 da ake buƙata
- HLM (High iyaka module)
- Lura: na zaɓi
Na'urorin haɗi
- Bakin riƙewa don hawa
Kayan aiki
- Small Phillips sukudireba
- Karamin flathead screwdriver
- Waya da mai cire waya (mafi girman 14awg)
Shigarwa
Shigar da Tsarin Gudanarwa/ Iyakance Modules
- A. Zaɓi rami don ƙirar.
- B. Sauke sukurori; cire murfin ramin fanko
- C. Saita maɓallin DIP akan module don nau'in shigarwar da ake buƙata.
- HLM 0-1V da 0-5V/1-5V nau'ikan shigarwar tsari ne na musamman. HLMs da aka yi oda tare da kowane nau'in shigarwa ba za a iya daidaita su ko tsara su don kowane nau'in ba.
- D. Saka module a cikin Ramin yayin lura da daidaitawar katin da amintaccen tsari a wurin ta amfani da sukurori mai riƙewa daga murfin ramin.
Shigarwa da Kulawa
- A. Yanke girman girman budewa a cikin panel.
- B. Saka MCT mai sarrafa ta hanyar yanke sashin gaba.
- C. Saka shafin mai lankwasa na maƙallan riƙewa(C) cikin notches a sama, ƙasa da ɓangarorin MCT(B) kuma ƙara ƙarar sukurori daidai gwargwado don tabbatar da MCT a wurin.
Haɗin kai da Wiring
- A. Haɗa wutar lantarki ta amfani da 14 AWG conductors na jan karfe da aka ƙididdige don ƙaramin mama 90°C. Don yin haɗin gwiwa, tsiri ¼” na insulation daga ƙarshen waya, kunna haɗin haɗin haɗin kai-hannun agogo baya-baya har sai tazarar ta buɗe, saka waya har zuwa ciki, sannan kunna dunƙule agogon agogo har sai ya matse (maximum torquet N0.51).
- B. Wurin sarrafa shigarwa/fitarwa: Haɗa wayoyi na shigarwa/fitarwa zuwa na'urorin PCM/HLM da aka shigar. Tsarin haɗin PCM da aka bayar a gefen hagu na MCT. Hoton haɗin HLM da aka bayar a gefen dama na MCT.
- C. Hanyoyin sadarwa: Haɗa MCT zuwa cibiyar sadarwa da ko PC ta hanyar sadarwar sadarwar sa ta serial (na zaɓi).
Lura:
- Babban ƙarartage raka'a (90 zuwa 250 VAC) sanye take da wani orange ikon haši. Low voltage raka'a (11 zuwa 26 VAC/DC) sanye take da koren ikon haši.
Lura:
- Ba a buƙatar haɗin sadarwa don saita ko amfani da MCT ɗin ku.
Lura:
- Masu haɗawa masu cirewa suna yin wayoyi cikin sauƙi. Cire mai haɗawa, haɗa wayoyi kuma kawai mayar da shi ciki.
Lura:
- Bayan aikace-aikacen wutar lantarki, idan MCT bai kunna ba a cikin daƙiƙa 2, cire wutar lantarki. Bincika wayoyi don tabbatar da haɗin kai masu dacewa kuma gwada sake kunnawa. Fis na ciki zai hana lalacewa ga over-voltage sharadi; duk da haka, ba ta da garanti.
Sanya MCT Don Amfani
4-1 Canja tsakanin Yanayin Aiki/ Kanfigareshan
- Yanayin kanfigareshan yana goyan bayan mu'amalar turanci kawai
- Yanayin aiki yana goyan bayan yaruka da yawa. Don canza harshe, jeka Yanayin Kanfigareshan > Saitin layi.
Don kashe rikodin bayanai
- Aiwatar da babban iko ga MCT kuma ba da damar naúrar ta fara (Image A).
- Latsa
gunkin menu kuma zaɓi Data > Data (Hoto a/b). Kashe hasken kore a kusurwar dama-dama. Danna shafin gida 
gunkin gida don fita zuwa (Image b).
Don shigar da saitin Offline:
- Danna gunkin menu don samun dama kuma zaɓi Na'ura > Saituna (Hoto c).
Don canza mu'amalar harshe:
- A yanayin layi, sake danna Menu kuma zaɓi Saiti > Harshe (Hoto e). Zaɓi yaren da kuke so zuwa ON. Taɓa (Hoto f). Taɓa a cikin hanzari.
- Latsa gunkin menu> Tsarin don ci gaba da saitin layi (Image G) ko
- danna gunkin gida don fita zuwa aiki Gida. (Hoto A).
Sanya sigogi na mai sarrafawa:
Don saita naúrar da hannu:
- A cikin yanayin layi, danna gunkin menu kuma zaɓi 'Fita' daga menu na'System' (Image G). * Menu> Tsarin> Fita
- A kan Exit Application allon danna zaɓi na biyu 'Fita aikace-aikacen.
(farawar yanayin daidaitawa)' maballin don barin lokacin aiki (Image H). Taɓa a saurin fita don sake kunnawa cikin aikace-aikacen Configurator.(Hoto B)
- Fara ta danna gunkin menu kuma zaɓi 'Control Setup' daga menu na 'Setup'. Saita nau'in sarrafawa bisa ga shigar PCMs/HLMs (Hoto I) * Yanayin Kanfigareshan yana goyan bayan ƙirar Ingilishi kawai
- Da zarar an saita nau'in sarrafawa, kewaya zuwa Tsarin Maɗaukaki ta hanyar zaɓar shi daga menu na 'Setup' (Image J/K). * Menu > Saita > Kanfigareshan madauki
- Sanya madauki ta zaɓar saitunan daban-daban suna samar da jerin kuma shigar da ƙimar da ake buƙata (Image L).
- Ci gaba da tsari don sauran madaukai da iyaka (idan an shigar). (Hoto M)
- Keɓance hanyar sadarwa ta hanyar cire abubuwan da ba a buƙata ta zaɓin 'Ayyukan' daga menu na 'Farawa' da kunna ko kashe zaɓuɓɓukan da ake buƙata. (Hoto N) * Menu > Farawa > Ayyuka
- Da zarar an kammala duk saituna, zaɓi 'Fita' daga '.File'menu. (Image O). Da zarar an rufe taga Configurator, sake zagayowar wutar lantarki zuwa MCT don kammala tsarin daidaitawa. (Hoto P)
Daidaita sigogi ta atomatik ta shigo da kaya files
Don shigo da tsarin da ke akwai file:
Bi matakai 1-2. Zagayowar wutar lantarki zuwa MCT zuwa yanayin aiki. (P)
- Danna gunkin menu kuma zaɓi Bayanai> Bayanai (Hoto Q). Kashe hasken kore a kusurwar dama-dama. Latsa Gida don fita. (Hoto R)
- Danna gunkin menu kuma zaɓi Na'ura > Saituna (Image S). Latsa gunkin menu kuma zaɓi Offline > Aiki (Hoto T). Taɓa .
- A cikin yanayin layi, danna gunkin menu> Tsarin> Kanfigareshan (U).
- Don shigo da saitin daga sandar žwažwalwar ajiyar USB, da farko saka na'urar žwažwalwar ajiya na USB mai dauke da tsarin da ake so file zuwa tashar USB na MCT. (Hoto V)
- Danna 'Load Configuration' file maballin, buɗe abin da ake so file kuma ba da damar daidaitawa don lodawa (Hoto V/ W).
- Da zarar an gama shigo da kaya, sake zagayowar wutar lantarki zuwa MCT don kammala tsarin daidaitawa. (Hoto X)
| File | |
| 1 Fita | 3 madauki Adireshi Amfani |
| 2 Game da | 4 Smart IO Comms Utility |
| Saita | |
| 1 Sarrafa Saita | |
| Ƙararrawa masu laushi, Mahimman Bayanan Kulawa, Math/Logic, Abubuwan da aka Kashe akan Kuskuren Shigarwa | |
| 2. Madauki Daidaitawa | |
| 2.1 TagSuna | 2.21 Fitowa 4 Aiki |
| 2.2 Nau'in shigarwa | 2.22 Fitowa 4 Canja wurin gazawar |
| 2.3 Raka'a na shigarwa | 2.23 Fitowa 4 Ƙananan Ƙimar Iyaka |
| 2.4 Matsayin Decimal | 2.24 Fitowa 4 Maimaita Ƙaramar / Babban Sikeli |
| 2.5 Ƙaramar Shigarwa / Maɗaukakin Sikeli | 2.25 Ƙararrawa (1-3) Aiki |
| 2.6 Tace mai shigarwa | 2.26 Ƙararrawa (1-3) Yanayin |
| 2.7 Ayyukan shigar da taron | 2.27 Ƙararrawa (1-3) Nuni |
| 2.8 Saƙon ƙararrawa na shigar da taron taron | 2.28 Ƙararrawa (1-3) Saiti |
| 2.9 Matsakaicin Ƙarƙashin Ƙarƙashin Ƙaƙwalwa/Maɗaukaki | 2.29 Ƙararrawa (1-3) Ciwon ciki |
| 2.10 Fitowa 1 Aiki | 2.30 Ƙararrawa (1-3) Jinkiri |
| 2.11 Fitowa 1 Canja wurin gazawar | 2.31 Saiti a Fara Shirin atomatik |
| 2.12 Fitowa 1 ON-KASHE Sarrafawa | 2.32 Saiti a Ƙarshen Shirin atomatik |
| 2.13 Fitowa 1 Lokacin Zagayowar | 2.33 Ƙarfin Ƙarfin Wuta |
| 2.14 Fitowa 1 Ƙananan Ƙimar Iyaka | 2.34 Yanayin Sadarwa |
| 2.15 Fitowa 2 Aiki | 2.35 Yanayin Madauki |
| 2.16 Fitowa 2 Canja wurin gazawar | 2.36 Ramp Yawan Aiki |
| 2.17 Fitowa 2 Lokacin Zagayowar | 2.37 Ramp Ƙididdigar Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarfafawa |
| 2.18 Fitowa 2 Ƙananan Ƙimar Iyaka | 2.38 Ramp Ƙididdiga Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarfafawa |
| 2.19 Fitowa 3 Aiki | 2.39 Saiti 2 Tsarin |
| 2.20 Fitowa 3 Canja wurin gazawar | 2.40 Saiti 2 |
| 3. Iyakance Kanfigareshan | |
| 3.1 TagSuna | 3.12 Fitowa 2 Aiki |
| 3.2 Nau'in shigarwa | 3.13 Ayyukan ƙararrawa |
| 3.3 Raka'a na shigarwa | 3.14 Yanayin ƙararrawa |
| 3.4 Matsayin Decimal | 3.15 Alamar Ƙararrawa |
| 3.5 Ƙaramar Shigarwa / Maɗaukakin Sikeli | 3.16 Saitin Ƙararrawa |
| 3.6 Tace mai shigarwa | 3.17 Ƙararrawa Hysteresis |
| 3.7 Fitowa 1 Aiki | 3.18 Canja wurin gazawar ƙararrawa |
| 3.8 Fitowa 1 Ciwon ciki | 3.19 Ayyukan shigar da taron |
| 3.9 Ƙananan / Babban Iyakar Babban Saiti | 3.20 Tsarin Nuni |
| 3.10 Ƙarƙashin Ƙarƙashin Ƙaƙwalwar Ƙaƙwalwar Ƙaƙƙarfan Saiti | 3.21 Sake farawa Yanayin |
| 3.11 Maɗaukaki / Ƙarƙashin Ƙimar Saiti | |
| 4 Saka idanu Daidaitawa | |
| 4.1 Tagsuna | 4.4 Matsayin Decimal |
| 4.2 Nau'in shigarwa | 4.5 Ƙaramar Shigarwa / Maɗaukakin Sikeli |
| 4.3 Raka'a na shigarwa | |
| 5 Mai laushi Ƙararrawa Daidaitawa | |
| Tushen ƙararrawa, Nau'in ƙararrawa, Mai hanawa, Shiru, Imel, Ringback, Saitin ƙararrawa, Ƙarfafawa, Jinkiri | |
| 6 Kanfigareshan Lissafi/Logic | |
| 6.1 Shigar da Math/Logic Equation | 6.2 Math/Logic Equation Examples |
| Zabuka | |
| 1 Kasadar Sarrafa | |
| Naƙasasshe, Tsari, Ragewa, Rabo | |
| 2 Fadadawa IO | |
| 2.1 Input (8-23) Aiki | 2.3 Ƙaramar Shigarwa / Maɗaukakin Sikeli |
| 2.2 Input (8-23) Saƙon Ƙararrawa / Bayani | |
| 3 Mai ƙididdigewa | |
| Zaɓin mai ƙididdige lokaci, Yanayin gazawar wutar lantarki, Ƙararrawa akan ƙarewa, Imel/SMS akan Kammalawa | |
| Farawa | |
| 1 Ayyuka | 2 Farawa View |
| Tagsunaye | |
| 1 Aararrawa Suna | 3 Custom Suna Adireshi |
| 2 Taron Sunaye | |
karin bayani
taimako tuntuɓi Tallafin Fasaha:
- service@brainchild.com.tw
- 886-2-2786-1299
- http://www.brainchildtw.com
FAQ
- Tambaya: Shin ina buƙatar haɗin sadarwa don amfani da MCT?
- A: A'a, ba a buƙatar haɗin sadarwa don saita ko amfani da MCT ɗin ku.
- Tambaya: Menene zan yi idan MCT bai tashi ba?
- A: Idan MCT bai kunna ba a cikin daƙiƙa 2 na amfani da wutar lantarki, cire wutar lantarki, bincika wiring don haɗin haɗin da ya dace, sannan sake gwada ƙarfin wuta. Fis na ciki zai hana lalacewa don wuce gona da iritage sharadi.
Takardu / Albarkatu
 |
BrainChild QS0MCT1A MCT Multi Loop Controller [pdf] Jagorar mai amfani QS0MCT1A MCT Multi Madauki Mai Sarrafa, QS0MCT1A, MCT Multi Madauki Mai Sarrafa, Mai Kula da Madauki da yawa, Mai Kula da Madauki |
