CGSULIT TS02 Bluetooth TPMS Sensor

 Exploded Diagram of TPMS Sensor Assembly

Bayanin Fasaha

Rayuwar Baturi	shekaru 5 +
Operatng Zazzabi	-40°C zuwa +105°C
Ajiya Zazzabi	-40°C zuwa +105°C
Rage Ma'aunin Zazzabi	-40°C zuwa +105°C
Tushen wutan lantarki	3V
Humidity Mai Aiki	≤90%
Mitar Aiki	2402-2480MHz
Rage Ma'aunin Matsi	0-800 kPa
Daidaiton Auna Matsi	± 10 kPa
Daidaiton Ma'aunin Zazzabi	±3°C
Acceleration Support	±250 g
Ikon watsawa	4-6 dBm
Ƙarfin baturi	345 mAh
Ƙididdiga Kariya	IP67
Girman Kunshin (L×W×H)	73 × 30 × 45 mm
Kunshin Nauyin	44.1g ku

Jerin Shiryawa

Abu	Yawan
Finished Product Packaging Box	1
Bluetooth Tire Pressure Sensor Unit	1
Black/Coffee-Colored Aluminum Valve Stem	1
Dunƙule	1

Gabatarwar Aiki

1. Deflate the tire Remove the valve cap and valve core, then fully deflate the tire. Use an air-powered bead breaker to separate the outer tire bead from the rim.
   Note: Ensure that the valve stem is positioned 180° opposite the bead breaker blade.
2. Remove the tire Secure the tire on the tire changer. Position the valve stem at the 1 o’clock position relative to the tire changer’s mount/demount head. Insert the tire lever and lift the tire bead over the mount head to remove the bead.
   Note: Maintain this starting position throughout the demounting process.
3.  Remove the sensor Use a screwdriver to loosen the retaining screw on the valve stem to detach the sensor. Then loosen the retaining nut and remove the valve stem.
4. Install the sensor and valve stem
   1. Step 1: Insert the valve stem through the valve hole from the inside of the rim.
   2. Step 2: Using a holding tool, tighten the nut to 4.0 N-m (Newton-meters) torque.
   3. Step 3: Adjust the installation angle so the sensor sits flush against the rim, then tighten the retaining screw.
   4. Step 4: The sensor and valve stem are now installed.
5.  Install the tire Place the tire onto the rim, ensuring that the valve stem is positioned 180° opposite the mount head. Mount the tire onto the rim following the tire changer manufacturer’s instructions.

Haɗin kai da haɗin kai

1. Fara Motar
   Once the vehicle is started, it will automatically search for the installed Bluetooth Tire Pressure Monitoring Sensors (TPMS).
2. Haɗin kai ta atomatik
   When the vehicle speed reaches 24 kph or above and is maintained for 1-3 minutes, the in-vehicle system will automatically detect the sensors and synchronize the data. When the tire pressure and temperature for all four wheels are displayed on the “Vehicle Status” or “Tire Information” screen, the connection is successful. If the connection fails, restart the vehicle or check the sensor installation and battery level.

Lura
Before installing the sensor, please read all instructions and precautions carefully. It is recommended that the installation be performed by a professional. Failure to follow the installation instructions may result in the tire pressure sensor not functioning properly.

• Website: www.cgsulit.com
• Imel: support@cgsulit.com

GARGADI FCC

Wannan na'urar ta bi sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma
2. Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.

Duk wani canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.

Lura: An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class B, bisa ga sashi na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga kutsawa mai cutarwa a cikin shigarwar mazaunin. Wannan kayan aiki yana haifar da amfani kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba a shigar da shi ba kuma aka yi amfani da shi daidai da umarnin, na iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:

• Sake daidaitawa ko matsar da eriya mai karɓa.
• Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
• Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
• Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

Wannan kayan aikin ya dace da iyakokin fiddawa na FCC da aka tsara don yanayin da ba a sarrafa shi ba. Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa 20cm tsakanin radiyo & jikin ku.

FAQ

What should I do if the connection fails during pairing?

: If the connection fails, try restarting the vehicle or checking the sensor installation and battery level. Ensure that the vehicle speed reaches the required threshold for automatic connection.

Can I install the sensor myself?

It is recommended to have the sensor installed by a professional to avoid any issues with functionality. Follow all provided instructions carefully.

Takardu / Albarkatu

CGSULIT TS02 Bluetooth TPMS Sensor [pdf] Jagoran Jagora TS02, TS02 Bluetooth TPMS Sensor, Bluetooth TPMS Sensor, TPMS Sensor, Sensor

Magana

• Manual mai amfani