YIN ZAMANI
RAI YIWU
GASKIYA TUKI
Jagoran Zane
VLT® Soft Starter – MCD 100
MCD 100 VLT Soft Starter
Duk game da MCD 100
Jagorar Zane MCD 100
1.1.1 Gabatarwa
MCD 100 masu farawa masu laushi an ƙera su don farawa mai laushi da tsayawa na 3 lokaci ac Motors, don haka rage inrush halin yanzu da kuma kawar da lalacewa ta hanyar hawan hawan hawan farawa.
Mai farawa mai laushi mai sarrafawa ta dijital yana fasalta ingantattun saituna da shigarwa mai sauƙi. Mai sarrafawa yana da daidaitattun daidaitacce hanzari da lokutan raguwa.
Godiya ga madaidaicin juzu'i na farko da aikin keɓancewa na musamman (fara farawa) mai farawa mai laushi ana iya inganta shi don kusan kowane aikace-aikace.
Ana amfani da masu farawa masu laushi na MCD 100 akan aikace-aikacen mota inda ingantaccen ƙididdiga da/ko tsayawa ke advantageous, kamar masu jigilar kaya, fanfo, famfo, kwampressors da manyan lodin inertia. MCD 100 masu farawa masu laushi kuma a bayyane suke a matsayin maye gurbin taurari/delta masu farawa.
1.1.2 Fasali
- Motoci max. 25 A
- Ana iya daidaita lokutan hanzari: 0-10 seconds
- Ana iya daidaita lokutan raguwa: 0-10 seconds
- karfin juyi na farko yana daidaitawa har zuwa 85%
- Aikin Breakway (fara harbi)
- Universal iko voltage: 24 - 480 V AC / DC
- Gano matakan da suka ɓace ta atomatik
- Daidaitawa ta atomatik zuwa 50/60 Hz
- Alamar Matsayin LED
- Unlimited farawa/tsayawa ayyuka a awa daya (15A & 25A)
- Gina a cikin kariyar varistor
- Karamin ƙira na zamani
- DIN dogo mai hawa
- CE (EN 60947-4-2)
- CULUS (UL 508)
1.1.3 Gyarawa
Misali 1.1
1.1.4 Jagoran Zaɓi
| Nau'in | Max. iko | Max. FLC | Voltage | DD code code |
| Farashin MCD100-001 | 0,75 kW | 3 A | 208-240 V | 175G4000 |
| Farashin MCD100-001 | 1,5 kW | 3 A | 400-415 V | 175G4001 |
| Farashin MCD100-001 | 1,5 kW | 3 A | 440-480 V | 175G4002 |
| Farashin MCD100-001 | 2,2 kW | 3 A | 550-600 V | 175G4003 |
| Farashin MCD100-007 | 4 kW | 15 A | 208-240 V | 175G4004 |
| Farashin MCD100-007 | 7,5 kW | 15 A | 400-480 V | 175G4005 |
| Farashin MCD100-007 | 7,5 kW | 15 A | 500-600 V | 175G4006 |
| Farashin MCD100-011 | 7,5 kW | 25 A | 208-240 V | 175G4007 |
| Farashin MCD100-011 | 11 kW | 25 A | 400-480 V | 175G4008 |
| Farashin MCD100-011 | 15 kW | 25 A | 500-600 V | 175G4009 |
Tebur 1.1
Bayanan Fasaha
| Bayani dalla-dalla | Farashin MCD100-001 | Farashin MCD100-007 | Farashin MCD100-011 |
| Aiki na yanzu max. | 3A | 15 A | 25 A |
| Girman mota a: 208 - 240 V AC 400 - 480 V AC 550 - 600 V AC |
0.1-0.75 kW (0.18-1 HP) 0.1-1.5 kW (0.18-2 HP) 0.1-2.2 kW (0.18-3 HP) |
0.1-4.0 kW (0.18-5.5 HP) 0.1-7.5 kW (0.18-10 HP) 0.1-7.5 kW (0.18-10 HP) |
0.1-7.5 kW (0.18-10 HP) 0.1-11 kW (0.18-15 HP) 0.1-15 kW (0.18-20 HP) |
| Leakage na yanzu max. | 5 mA | ||
| Min. aiki halin yanzu | 50 mA | ||
| Kimomi: AC-53A Asynchronous Motors AC-53b Motocin Asynchronous tare da kewayawa AC-58a Hermetic compressors na refrigeration |
- 3A: AC-53b: 4-10: 110 - |
15A: AC-53a: 8-3: 100 - 3000 - 15A: AC-58a: 6-6: 100 - 3000 |
25A: AC-53a: 8-3 : 100-3000 - 25A: AC-58a: 6-6 : 100-3000 |
Tebur 1.2
| Sarrafa Ƙididdiga na kewaye | |
| Sarrafa voltagda iyaka, 230 V | 24-230 V |
| Sarrafa voltage kewayon, 400-600 V | 24-480V AC / DC |
| Karɓa voltagda max. | 20.4V AC / DC |
| Juyawa juzu'itagda min. | 5V AC / DC |
| Max. sarrafa halin yanzu don babu aiki | 1 mA |
| Sarrafa halin yanzu / Ƙarfin max. | 15 mA / 2 VA |
| Lokacin amsawa max. | 70 ms |
| Ramp- lokaci up | Daidaita da 0-10 sec. |
| Ramp- lokacin saukarwa | Daidaita da 0-10 sec. |
| Karfin farko | Daidaita daga 0-85% na karfin juzu'i tare da na zaɓi, farawa Kick. |
| EMC rigakafi da watsi | Ya dace da buƙatun EN 60947-4-2 |
Tebur 1.3
| Insulation | |
| Ƙimar rufin Voltage, ku | 660 V AC |
| Ƙunƙarar ƙima ta juriya Voltage, ump | 4 kV |
| Rukunin shigarwa | III |
Tebur 1.4
| Bayani na Musamman | Farashin MCD100-001 | Farashin MCD100-007 | Farashin MCD100-011 |
| Ci gaba da kashe wutar lantarki max.: | 4W | 2W/A | |
| Max. | 4W | 2W/A x Zagayowar wajibi | |
| Yanayin yanayin yanayi | -5 ° C zuwa 40 ° C | ||
| Hanyar sanyaya | Tsarin halitta | ||
| Yin hawa | A tsaye +/- 30° | ||
| Max. yanayin zafi tare da iyakataccen ƙima | 60°C, duba derating don yanayin zafi a cikin sakin layi Aiki at Babban Yanayin zafi. | ||
| Girgizar ajiya. iyaka | -20 ° C zuwa 80 ° C | ||
| Digiri na kariya/digiri gurɓatacce | IP 20/3 | ||
Tebur 1.5
| Kayayyaki | |
| Gidaje | PPO UL94V1 |
| Heatsink | Aluminum baki anodized |
| Tushen | Electroplated karfe |
Tebur 1.6
1.3.1 Tsarin Aiki
Exampku 1:
Farawa mai laushi da tasha mai laushi
Exampku 2:
Farawa mai laushi tare da farawa mai laushi da tasha mai laushi Farawa mai laushi
Tebur 1.7
1.3.2 Bayanin Aiki
Ramp up
A lokacin ramp- sama mai sarrafawa zai ƙara ƙara voltage zuwa motar har sai ya kai cikakken layi voltage. Gudun motar zai dogara ne akan ainihin nauyin akan mashin motar. Motar da ke da ƙananan kaya ko babu kaya zai kai cikakken gudu kafin voltage ya kai iyakar ƙimarsa. Ainihin ramp ana ƙididdige lokaci ta hanyar lambobi kuma ba za a yi tasiri ta wasu saitunan ba, mitar yanar gizo ko bambancin kaya ba.
Karfin farko
Ana amfani da juzu'in farko don saita juzu'in farawa na farkotage.
Ta wannan hanyar yana yiwuwa a daidaita mai sarrafawa zuwa aikace-aikacen da ke buƙatar ƙarfin farawa mafi girma. A wasu lokuta aikace-aikacen zai buƙaci babban juzu'i mai nisa.
Anan, ana iya haɗa matakin farko na karfin juyi tare da aikin farawa. Lokacin farawa shine tsawon 200 ms inda motar ke karɓar cikakken voltage.
Tasha mai laushi
A lokacin ramp- saukar da mai sarrafawa a hankali zai rage voltage zuwa ga mota don haka rage karfin juyi da halin yanzu. A sakamakon haka saurin motar zai shuɗe.
Siffar tasha mai laushi ita ce advantageous don kauce wa guduma ruwa da cavitation a kan famfo, da kuma kauce wa karkatar da kaya a kan masu jigilar kaya.
1.3.3 Alamar Matsayin LED
1.3.4 Wayoyi
Misali 1.2 MCD 100 – 007 / MCD 100 – 011
1.3.5 Gyarawa
MCD 100 yana ba da Timed Voltagda Ramp sama. Wannan yana nufin cewa motor voltage a hankali ramped har zuwa cikakken layi voltage bisa ga lokacin da rotary sauya ya saita.
Don guje wa lalacewar mai laushi mai laushi, saitunan da suka dace na matakin karfin juyi na farko da ramp dole ne a yi la'akari da lokacin tashi. Yana da mahimmanci don tabbatar da cewa motar tana haɓaka zuwa cikakken sauri kafin mai farawa mai laushi ya cika akan yanayin.
Saita matakin juzu'i na farko:
- Saita ramp lokaci zuwa max.
- Saita jujjuyawar farko zuwa min.
- Aiwatar da siginar sarrafawa na ƴan daƙiƙa guda. Idan motar ba ta jujjuya ba nan da nan ƙara matakin karfin juyi na farko tare da kan mataki kuma a sake gwadawa.
Yi maimaita har sai motar ta fara juyawa nan da nan bayan an yi amfani da siginar sarrafawa.
Saitin ramp lokacin tashi:
- Saita ramp lokaci zuwa max.
- Rage ramp lokacin har sai an ga karuwar injina.
- Ƙara ramp up time da mataki daya.
1.3.6 Fuses da gajeren kewaye kariya
Idan akwai gajeriyar kewayawa ana iya amfani da fis na yau da kullun don kare shigarwa - amma ba mai farawa mai laushi ba. Tebur mai zuwa yana lissafin bayanai don zaɓin fis na yau da kullun.
| Farashin MCD100-001 | Kariya max 25 A gL/gG |
| Farashin MCD100-007 | Kariya max 50 A gL/gG |
| Farashin MCD100-011 | Kariya max 80 A gL/gG |
Tebur 1.9
Ana iya amfani da fis ɗin Semiconductor tare da MCD 100 masu kula da farawa masu taushi. Amfani da fuses na semiconductor zai kare SCR's idan akwai gajerun da'irori kuma ya rage yuwuwar lalacewar SCR saboda igiyoyin wuce gona da iri. Lokacin zabar fuses semiconductor tabbatar da cewa fis ɗin yana da ƙarancin ƙimar ƙimar I2 t fiye da SCR (duba bayanai a cikin tebur mai zuwa), kuma fis ɗin na iya ɗaukar farkon halin yanzu don ainihin lokacin farawa.
| Farashin MCD100 | SCR I2t (A2s) |
| Farashin MCD100-001 | 72 |
| Farashin MCD100-007 | 1800 |
| Farashin MCD100-011 | 6300 |
Tebur 1.10
1.3.7 Girma
1.3.8 Aiki a Babban Zazzabi
| Yanayin yanayi | Ci gaba da halin yanzu | ||
| Farashin MCD100-001 | Farashin MCD100-007 | Farashin MCD100-011 | |
| 40°C | 3 A | 15 A | 25 A |
| 50°C | 2.5 A* | 12.5 A | 20 A |
| 60°C | 2.0 A* | 10 A | 17 A |
Tebur 1.11
* Matsakaicin izini na gefen mm 10 tsakanin samfuran
| Yanayin yanayi | Ƙimar sake zagayowar aiki (minti 15. max. akan lokaci) | |
| Farashin MCD100-007 | Farashin MCD100-011 | |
| 40°C | 15 A (100% sake zagayowar aiki) | 25 A (100% sake zagayowar aiki) |
| 50°C | 15 A (80% sake zagayowar aiki) | 25 A (80% sake zagayowar aiki) |
| 60°C | 15 A (65% sake zagayowar aiki) | 25 A (65% sake zagayowar aiki) |
Tebur 1.12
1.3.9 Sama da Kariyar Zafin
Idan an buƙata ana iya kiyaye mai sarrafawa daga zazzaɓi ta hanyar saka ma'aunin zafi da sanyio a cikin ramin gefen dama na mai sarrafawa.
Oda: UP 62 thermostat 037N0050
Dangane da aikace-aikacen ana iya haɗa ma'aunin zafi da sanyio a cikin jerin tare da da'irar sarrafawa na babban mai tuntuɓar. Lokacin da zafin zafin zafin rana ya wuce 90 ° C babban mai tuntuɓar za a kashe. Sake saitin hannu ya zama dole don sake kunna wannan kewaye.
Don haɗin waya duba 1.4 Application Examples.
1.3.10 Umarnin hawa
An ƙera mai sarrafawa don hawa a tsaye. Idan mai sarrafawa yana hawa a kwance dole ne a rage nauyin halin yanzu da 50%.
Mai sarrafawa baya buƙatar share gefe.
Tsakanin masu sarrafawa guda biyu a tsaye dole ne ya zama ƙaramar 80 mm (3.15").
Tsakanin bangon mai sarrafawa da saman da ƙasa dole ne ya zama mafi ƙarancin mm 30 (1.2 ").
Aikace-aikace Examples
1.4.1 Kariyar zafi mai zafi
Exampshafi na 1
Ana iya haɗa ma'aunin zafi da sanyio a jeri tare da shigar da sarrafawa na mai farawa mai laushi. Lokacin da zafin zafin zafin ya wuce 90 ° C za a kashe mai farawa mai laushi.
NOTE
Lokacin da zafin jiki ya faɗi kusan 30°C mai sarrafawa zai sake kunnawa ta atomatik. Ba a yarda da wannan a wasu aikace-aikacen ba.
Exampshafi na 2
Ana haɗa ma'aunin zafi da sanyio a cikin jeri tare da da'irar sarrafawa na babban mai lamba. Lokacin da zafin zafin zafin rana ya wuce 90 ° C babban mai tuntuɓar za a kashe. Wannan kewaye yana buƙatar sake saitin hannu don sake kunna motar.
1.4.2 Layin Sarrafa Fara Mai laushi
Lokacin da aka canza dan kwangilar C1 zuwa ON-State, mai farawa mai laushi zai fara motar, bisa ga saitunan R.amp-up lokaci da Farko karfin juyi sabawa.
Lokacin da aka kunna contactor C1 zuwa KASHE-State, za a kashe motar nan take.
A cikin wannan aikace-aikacen mai tuntuɓar ba zai sami kaya yayin yin aiki ba. Mai tuntuɓar zai ɗauki kuma ya karya abin da ba a sani ba.
1.4.3 Fara mai laushi Mai Sarrafa shigarwar
Lokacin da iko voltage yana amfani da A1 - A2, MCD mai laushi mai farawa zai fara motar, bisa ga saitunan R.amp-up lokaci da Farko karfin juyi sabawa.
Lokacin da iko voltage an kashe, za a tsaya da taushin motar bisa ga saitunan Rampsaukar lokaci daidaitawa.
Don kashe nan take saita Ramp- Lokacin saukarwa zuwa 0.
Danfoss ba zai iya karɓar alhakin yuwuwar kurakurai a cikin kasida, ƙasidu da sauran bugu. Danfoss yana da haƙƙin canza kayan sa ba tare da sanarwa ba. Wannan kuma ya shafi samfuran da aka riga aka yi kan oda muddin ana iya yin irin waɗannan sauye-sauye ba tare da wasu canje-canje masu zuwa sun zama dole ba cikin ƙayyadaddun ƙayyadaddun da aka amince da su.
Duk alamun kasuwanci a cikin wannan kayan mallakar kamfanoni ne.
Danfoss da alamar tambarin Danfoss alamun kasuwanci ne na Danfoss A/S. An kiyaye duk haƙƙoƙi.
Saukewa: MG12A202
alamar kasuwanci ce mai rijista 
www.danfoss.com/drives
175R0997
Saukewa: MG12A202
Saukewa: MG12A202
Takardu / Albarkatu
 |
Danfoss MCD 100 VLT Soft Starter [pdf] Jagorar mai amfani MCD 100-001, MCD 100-007, MCD 100-011, MCD 100 VLT Soft Starter, MCD 100, VLT Soft Starter, Soft Starter, Starter |