DELL Command Configure Software User Manual

Bayanan kula, gargadi, da gargadi

NOTE: NOTE yana nuna mahimman bayanai waɗanda ke taimaka muku yin amfani da samfuran ku da kyau.

Tsanaki: HATTARA yana nuna ko dai lalacewar kayan aiki ko asarar bayanai kuma yana gaya maka yadda zaka kaucewa matsalar.

GARGADI: GARGAƊI yana nuna yuwuwar lalacewar dukiya, rauni, ko mutuwa.

© 2025 Dell Inc. ko rassansa. An kiyaye duk haƙƙoƙi. Dell Technologies, Dell, da sauran alamun kasuwanci alamun kasuwanci ne na Dell Inc. ko rassan sa. Wasu alamun kasuwanci na iya zama alamun kasuwanci na masu su.

Introduction to Dell Command | Configure

Dell Command | Configure is a software package that provides BIOS configuration capability for Dell client systems. IT administrators can use this tool to configure BIOS settings and create BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI).

NOTE: Dell Command | Configure replaces Dell Client Configuration Toolkit version 2.2.1.

• Dell Command | Sanya 4.10.1 ko kuma daga baya yana haifar da 64-bit SCE tare da ƙuntatawa.
• Dell Command | Configure 4.10.1 or later on a 64–bit ARM client machine, generates an ARM-based 64–bit SCE.

For more information, see the Dell Command | Configure 5.x User’s Guide on the Support | Dell site.

Batutuwa:

• Sigar
• Masu sauraro da aka nufa
• Manufar daftarin aiki

Sigar

Wannan babin yana ba da ƙarin bayaniview of the Dell Command | Configure version history, including release dates, supported operating systems, and compatible platform architectures to help you identify which version aligns with your system requirements.

Dell Command | Configure supports the following Windows operating systems:

• Windows 11
• Windows 10
• Muhalli na Preinstallation (Windows PE)

The following table lists the available Dell Command | Configure versions along with their release dates, supported operating systems, and platform compatibility.

Table 1. Sigar matrix

NOTE: Starting from the Dell Command | Configure 5.1.0 release, support for 32-bit systems has been discontinued.

Masu sauraro da aka nufa

The installation guide for Dell Command | Configure is intended for IT professionals and system administrators. It offers comprehensive instructions for configuring BIOS settings and creating BIOS packages using both the Dell Command Configure User Interface (UI) and Command-Line Interface (CLI).

Manufar daftarin aiki

This document provides instructions for installing and configuring BIOS settings and creates BIOS packages using the Dell Command | Configure User Interface (UI) or Command-Line Interface (CLI) for efficient BIOS management.

Shiga Dell Command | Sanya mai sakawa

Dokar Dell | Sanya shigarwa file is available as a Dell Update Package (DUP) at Support | Dell. Follow these steps to download the DUP:

1. Je zuwa Tallafi | Dell.
2. Karkashin Wani samfur za mu iya taimaka muku da shi, shiga cikin Sabis Tag na'urar Dell da ke da goyan bayan ku kuma danna Sallama, ko danna Gano kwamfuta na sirri.
3. A shafin Tallafin samfur don na'urar Dell ku, danna Direbobi & Sauke abubuwa.
4. Danna Nemo takamaiman direba da hannu gare ku [model].
5. Duba Gudanar da Tsarin akwati a ƙarƙashin Kashi sauke-saukar.
6. Gano wuri Dell Command | Sanya in list and select Zazzagewa a gefen dama na shafin.
7. Gano abin da aka sauke file a kan kwamfutarka (a cikin Google Chrome, da file ya bayyana a kasan taga Chrome), kuma gudanar da aiwatarwa file.
8. Bi umarnin kan allo.

Dell Command | Configure for Windows

This section provides details about the supported Windows versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Windows systems.

Batutuwa:

• Tsarukan aiki masu goyan baya don Windows
  
• Matakan da aka tallafa
  
• Installing Dell Command | Configure on Windows systems
• Uninstalling Dell Command | Configure from Windows systems
• Upgrading Dell Command | Configure on Windows systems

Tsarukan aiki masu goyan baya don Windows

Tebur 2. Tsarin aiki masu goyan baya

Matakan da aka tallafa

Table 3. Supported platforms

Table 3. Supported platforms (continued)

NOTE: Platforms must support WMI-ACPI BIOS for full functionality.

NOTE: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell

Installing Dell Command | Configure on Windows systems

You can install Dell Command | Configure on Windows systems using either the Dell Update Package (DUP) or the MSI installer.
Both installers support standard and silent (unattended) installation modes.

NOTE: Microsoft .NET 4.8.1 or later must be installed on the client system to install Dell Command | Configure using the user interface.

NOTE: If User Account Control (UAC) is enabled on a Windows 10 system, silent mode installation is not allowed. Ensure that you have administrative privileges before installing Dell Command | Configure in silent mode.

Abubuwan da ake bukata

Before installing Dell Command | Configure, ensure the following:

• A supported Windows operating system is installed and running.
• Dell Command | Configure installation file is available (downloadable from Support | Dell).
• Administrator privileges are available on the system.
• Microsoft .NET 4.8.1 (for UI) and .NET 8.0 SDK (for Dell Command Secure BIOS Configuration Server) are installed.
• Microsoft Visual C++ Redistributable for Visual Studio 2022 is installed.
• WMI-ACPI compliant BIOS is available for full functionality.

NOTE:

• The system must be connected to a stable network when installing Dell Command | Configure with support for Dell Command Secure BIOS Configuration.
• On Windows 10 or later, enable Microsoft NET Tsarin 4.8 or later version from the Kunna ko kashe fasalin Windows allo.
• The system has limited functionality if it does not have a WMI-ACPI compliant BIOS. Update the BIOS with a compatible version, if available. For more information, see Windows SMM Security Mitigations Table (WSMT) Compliance section in the Dell Command | Configure User’s Guide at Support | Dell.

Install Dell Command | Configure using DUP: Standard installation

To install Dell Command | Configure, run the Dell Update Package (DUP) with default settings. This method simplifies deployment and requires minimal user input.

1. Danna DUP da aka sauke sau biyu, danna Ee, sannan danna INSTALL.
   Dokar Dell | Ana nuna mayen shigarwa.
2. Gudun mayen shigarwa.
   Don ƙarin bayani, duba Gudun mayen shigarwa.

Install Dell Command | Configure using DUP: Silent installation

To install Dell Command | Configure silently, use the Dell Update Package (DUP) with command-line switches that suppress user prompts. This method enables automated, unattended installation.

1. Browse to the folder where you have downloaded the Dell Update Package (DUP) and open the command prompt.
2. Gudanar da umarni mai zuwa:

Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.

NOTE: For more information about using commands, type any one of the following commands:

• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/s.
• Dell-Command-Configure-Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE/?.

NOTE: During silent installation using DUP, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server.

Install Dell Command | Configure using MSI file: Standard installation

To install Dell Command | Configure, run the MSI file directly for a standard installation with default settings providing a simple and user-friendly setup process.

1. Danna Fakitin Sabuntawar Dell sau biyu da aka zazzage (DUP), kuma danna Ee.
2. Danna EXTRACT.
   Ana nuna taga Browse For Folder.
3. Specify a folder location on the system, or create a folder to extract the files, and click OK.
4. Zuwa view da fitar files, danna View Jaka
   Babban fayil ɗin ya ƙunshi abubuwa masu zuwa files:
   ● 1028.mst
   ● 1031.mst
   ● 1034.mst
   ● 1036.mst
   ● 1040.mst
   ● 1041.mst
   ● 1043.mst
   ● 2052.mst
   ● 3076.mst
   ● Command_Configure.msi
   ● mup.xml
   ● package.xml
5. Don samun dama ga Dokar Dell | Sanya mayen shigarwa, danna Command_Configure.msi sau biyu.
6. Gudun mayen shigarwa.
   Don ƙarin bayani, duba Gudun mayen shigarwa.
   After you install Dell Command | Configure , you can use the GUI or the CLI to configure the client systems. For more information about configuring the systems, see the following documents at Support | Dell:
   ● Dell Command | Configure Command-Line Interface Reference Guide
   ● Dell Command | Configure User’s Guide

Gudun mayen shigarwa

To run the installation wizard for installing the Dell Command | Configure .msi file on your device:

1. Browse to the folder in which you have extracted the Umurnin_Configure.msi or DUP file.
2. Right-click the .msi or DUP and click Run as administrator.
   Ana nuna mayen shigarwa.
3.  Danna Gaba.
   Ana nuna allon Yarjejeniyar Lasisi.
4. Karanta yarjejeniyar lasisi kuma danna Na karɓi sharuɗɗan cikin yarjejeniyar lasisi, sannan danna Na gaba.
   Ana nuna allon Bayanin Abokin Ciniki.
5. Type the username and organization, select one of the following options, and then click Next.
   ● For multiple users, select Anyone who uses this computer (all users).
   ● For a single user, select Only for me (Dell Computer Corporation).
   Ana nuna allon saitin al'ada.
6. Danna Gaba don shigar da Dokar Dell | Sanya CLI da GUI a cikin tsoho directory. Umurnin Dell tsoho | Sanya kundin adireshi na shigarwa sune:
   ● For 32-bit systems, C:\Program Files \ Dell \ Umurnin Sanya.
   ● For 64-bit systems, C:\Program Files (x86) \ Dell\Command Configure.
   Ana nuna allon Shirin Shigar da Shirin.
7. Danna Ee.
   The Installing Dell Command | Configure screen is displayed. When the installation completes, the installation wizard- completed screen is displayed.
8. Danna Gama.
   Idan Dokar Dell | Sanya GUI cikin nasara, an nuna gajeriyar hanyar GUI akan tebur.

Install Dell Command | Configure using .msi file: Silent installation

You can seamlessly install Dell Command | Configure in silent mode using the .msi file, leveraging command-line parameters for efficient deployment.

NOTE: Dell Command | Configure silent mode installation supports installing the Dell Command Secure BIOS Configuration Server, but it does not support the Dell Command | Configure option.

NOTE: By default, during silent installation using the .msi file, Dell Command | Configure installs without Dell Command Secure BIOS Configuration Server. To install DCC with DCSBC server, use the following command: msiexec.exe /i Command_Configure.msi DCSBC=1 /qn

1. Je zuwa babban fayil inda Dell Command | Ana fitar da mai sakawa daga Dell Update Package (DUP).
2. Open Command Prompt as administrator.
3. Gudun umarni mai zuwa: msiexec.exe /i Command_Configure.msi /qn
   Dokar Dell | Ana shigar da abubuwan da aka haɗa cikin shiru a cikin wurare masu zuwa:
   ● For 32-bit systems, C:\Program Files \ Dell \ Umurnin Sanya.
   ● For 64-bit systems, C:\Program Files (x86) \ Dell\Command Configure.

Ana shigarwa tare da harsuna masu tallafi

To assess silent and unattended with supported languages, run the following command: msiexec /i Umurnin_Configure.msi TRANSFORMS=1036.mst.

To specify the installation language, use the command-line option TRANSFORMS=<language ID>.mst, where <language ID> corresponds to one of the following:

• 1028 - Taiwan ta China
• 1031 - Jamusanci
• 1033 - Turanci
• 1034 - Mutanen Espanya
• 1036 - Faransanci
• 1040 - Italiyanci
• 1041 - Jafananci
• 1043 - Yaren mutanen Holland
• 2052 - Sauƙaƙen Sinanci
• 3076 - Hongkong na kasar Sin

NOTE: If the specified language or the default operating system language is not supported, the installation defaults to English.

Uninstalling Dell Command | Configure from Windows systems

To uninstall Dell Command | Configure, use the Control Panel to remove the application from Windows ensuring clean removal without affecting system settings.

1. Bude Kwamitin Kulawa.
2. Je zuwa Shirye-shirye > Shirye-shirye da Fasaloli.
3. Find Dell Command | Configure a cikin lissafin.
4. Right-click it and select Cire shigarwa.
5. Follow the on-screen prompts to complete the uninstallation.

Upgrading Dell Command | Configure on Windows systems

You can upgrade Dell Command | Configure using a Dell Update Package (DUP) or the .msi file.

NOTE: Microsoft .NET Framework 8.0 or later must be installed on the client system to ensure a successful Dell Command | Configure user interface installation.

NOTE: If Windows User Account Control (UAC) is enabled on Windows 10 and 11 systems, you cannot install Dell Command | Configure in silent mode. Ensure that you have an administrative privilege before installing Dell Command | Configure in silent mode.

NOTE: This system does not have a WMI-ACPI compliant BIOS, so the limited functionality is available. Update the BIOS with a compatible version, if available. For more information, see Dell Command | Configure 5.x Release Notes at Support | Dell.

NOTE: You cannot install and upgrade Dell Command | Configure on non-WMI-ACPI in silent mode.

Upgrade Dell Command | Configure using DUP file

Yi waɗannan matakai don haɓaka Dokar Dell | Saita (tsohon Kayan aikin Kanfigareshan Abokin Ciniki na Dell) zuwa sigar ta gaba:

1. Double-click the downloaded DUP, and then click SHIGA.
   Dokar Dell | An ƙaddamar da mayen shigarwa.
2. Gudun mayen shigarwa, kuma bi umarnin da aka nuna akan allon.

Upgrade Dell Command | Configure using .msi file

To upgrade Dell Command | Configure, uninstall the existing version and install the new version using the .msi installer ensuring a clean upgrade with the latest features and fixes.

1. Zazzage sabon shigarwa file Dell-Command-Configure-
   Application_<SWB>_WIN<architecture>_<version>.<build number>_A00.EXE from Support | Dell.
2. Extract the installation using any of the following:
   ● From the folder where you extracted the file, double-click the Dell_Command_Configure.msi file
   ● From the command prompt, browse to the directory where you extracted the file, sa'an nan kuma gudanar da umarni mai zuwa:
   msiexec.exe /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=VOMUS
   NOTE: Ana nuna allon mayen shigarwa sannan “Tsoffin sigar Dell Command | Ana gano saiti akan wannan tsarin. Idan ka ci gaba, mai sakawa zai cire tsohon sigar kuma ya ci gaba da shigar da sabuwar sigar. Idan ka soke shigar da sabuwar sigar, ba za a mayar da tsarin zuwa sigar Dell Command na baya ba | Sanya Kuna so ku ci gaba?" sako.
3. Bi umarnin kan allon don haɓakawa.
   NOTE: Don haɓakawa shiru, gudanar da umarni mai zuwa: msiexec /i Command_Configure.msi REINSTALL=ALL REINSTALLMODE=vmous REBOOT=REALLYSUPPRESS /qn
   NOTE: If a previous version of Dell Command | Configure is installed in a non-default directory, you cannot upgrade to the latest Dell Command | Configure version. In this case, uninstall the existing version and assess fresh installation of the latest version.

Haɓakawa a cikin babban fayil ɗin tsoho

To upgrade Dell Command | Configure, run a command from the extracted DUP folder to silently install the update in the default directory.

1. Bincika zuwa babban fayil ɗin da kuka ciro Dokar Dell | Sanya mai sakawa daga Dell Update Package (DUP).
2. Gudun umarni mai zuwa: msiexec.exe /i Command_Configure.msi /qn
   Dokar Dell | Ana shigar da abubuwan da aka haɗa cikin shiru a cikin wurare masu zuwa:
   ● For 32-bit systems, C:\Program Files (x86) \ Dell\Command Configure.
   ● For 64-bit systems, C:\Program Files (x86) \ Dell\Command Configure.

Dell Command | Configure for Linux

This section provides details about the supported Linux versions and Dell platforms, and explains how to install and uninstall Dell Command | Configure on Linux systems.

Batutuwa:

• Supported operating systems for Linux
• Supported Platforms for Linux
• Installing Dell Command | Configure on Linux systems
• Uninstalling Dell Command | Configure on Linux systems
• Upgrading Dell Command | Configure for systems running on Linux

Supported operating systems for Linux

Tebur 4. Tsarin aiki masu goyan baya

Supported Platforms for Linux

Table 5. Supported platforms

NOTE: Platforms must support WMI-ACPI BIOS for full functionality.

NOTE: For systems with non-WMI-ACPI compliant BIOS, functionality is limited. For more information, see Dell Command | Configure Version 5.x User’s Guide at Support | Dell.

Installing Dell Command | Configure on Linux systems

To install Dell Command | Configure on Linux, download the appropriate .deb or .rpm package from Dell Support and use your package manager to install it enabling CLI-based BIOS configuration on supported Dell systems.

NOTE:

• Dell Command | Configure user interface is not supported on systems running the Linux operating system.
• Dell Command Secure BIOS Configuration(DCSBC) is not supported on systems running the Linux operating system.

You can install the Dell Command | Configure for Red Hat and Debian-based linux distributions, by following these steps:

1. Go to Support | Dell, download the tar.gz file.
2. NOTE:
   ● If you have downloaded the package for Red Hat Enterprise Linux, the RPMs are included in the package.
   ● If you have downloaded the package for Ubuntu Desktop, the Debians are included in the package.

Install the RPMs or Debians as appropriate for your system.
Hanyar shigarwa ta asali shine /opt/dell/dcc.

Abubuwan da ake bukata

• Ya kamata wurin aiki ya kasance yana gudana akan tsarin aiki na Linux mai tallafi.
• Zazzage ɗakunan karatu na buɗe SSL 1.x don shigarwa da gudanar da Dokar Dell | Sanya akan Red Hat Enterprise Linux 8 da Ubuntu Desktop 20.04.
• Download openSSL 3.x libraries to install and run Dell Command | Configure on Red Hat Enterprise Linux 9, Ubuntu Desktop 22.04, and Ubuntu Desktop 24.04.

Install Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To install Dell Command | Configure on Red Hat Enterprise Linux 8 or 9, download the RPM package from Dell Support and install it using the command line.

1. Daga dell.com/support, Download the command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz file from Support | Dell .
2. Untar da file ta amfani da umarni mai zuwa:

tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.<architecture>.tar.gz

To install Dell Command | Configure on systems running Red Hat Enterprise Linux 8 or 9 systems using 64-bit RPMs, run the commands in the following order:

rpm —ivh srvadmin-hapi-<version number>.el8.x86_64.rpm

rpm —ivh command-configure-<version number>-<Build Number>.<RHEL Version>.<architecture>.rpm

Installing Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04

To install Dell Command | Configure on supported Ubuntu versions, download the DEB package from Dell Support and install it using the command line. See Accessing Dell Command | Configure installer.

1. Download the command_configure-<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz from Support | Dell.
2. Untar da file using the following command: tar -xvzf command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.tar.gz
   The installer command-configure_<version><Build Number>.<Ubuntu
   Siga >> .tar.gz ya ƙunshi fakiti masu zuwa waɗanda dole ne a sanya su cikin tsari mai zuwa:
   ● srvadmin-hapi_<version number>_amd64.deb
   ● command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
3. To install HAPI, run the following command: dpkg -i srvadmin-hapi_<version number>_amd64.deb
   NOTE: If the installation on Ubuntu fails due to dependency issues with libc, ensure that you upgrade the system by running the following command:
   apt-get-f shigar
4. To install Dell Command | Configure, run:
   dpkg -i command-configure_<version>-<Build Number>.<Ubuntu Version>_<architecture>.deb
   Hanyar shigarwa ta asali shine /opt/dell/dcc.
   NOTE: If the installation on Ubuntu fails due to dependency problems libc, then ensure to upgrade the system using apt-get upgrade command:
   apt-get-f shigar

Uninstalling Dell Command | Configure on Linux systems

To uninstall Dell Command | Configure on Linux, run the appropriate RPMs for your system to remove the installed package (rpm or deb) based on your distribution removing the application and its components.

NOTE: Uninstalling or upgrading Dell Command | Configure on systems running supported Linux operating systems leave empty files and folders on the system. These residual files and folders do not affect system functionality.

Uninstall Dell Command | Configure from Red Hat Enterprise Linux 8 and 9

Don cire umarnin Dell | Sanya kan tsarin da ke gudana Red Hat Enterprise Linux 8 ko 9, gudanar da umarni a cikin tsari mai zuwa:

rpm -e command-configure-<version>-<build number>.el8/9.x86_64

rpm -e srvadmin-hapi- .el8.x86_64

Uninstall Dell Command | Configure from Ubuntu Desktop

You can uninstall Dell Command | Configure and dependent packages on systems running Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

NOTE: You must uninstall Dell Command | Configure before uninstalling the dependent packages.

1. Don cire umarnin Dell | Sanya kuma cire tsari files kuma na wucin gadi files, run the following command: dpkg –purge command-configure
2. Don cire Hapi da cire sanyi files kuma na wucin gadi files, run the following command: dpkg –purge srvadmin-hapi
3. To verify that the Dell Command | Configure is uninstalled in your system, run the following command: dpkg –l | grep command-configure
   If Dell Command | Configure details are not displayed, then the uninstallation is successful.

Upgrading Dell Command | Configure for systems running on Linux

You can upgrade Dell Command | Configure on Linux, uninstall the existing version and install the latest package.

1. Download the Dell Command | Configure .tar.gz file from Support | Dell and save it on your system.
2. Haɓaka sigar Dell Command | Sanya kan tsarin.

NOTE: Uninstalling and upgrading Dell Command | Configure on systems running supported Linux operating systems leaves empty files da manyan fayiloli akan tsarin. The files da manyan fayiloli ba su da wani tasiri na aiki.

Upgrade Dell Command | Configure on Red Hat Enterprise Linux 8 and 9

To upgrade Dell Command | Configure on Red Hat Eenterprse Linux 8 or 9, uninstall the current version and install the latest RPM package.

1. Download the command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz file from Support | Dell.
2. Untar da file using the following command: tar -zxvf command-configure-<version>-<Build Number>.<RHEL Version>.x86_64.tar.gz

To upgrade Dell Command | Configure on computers running Red Hat Enterprise Linux 8 or 9 computers using 64-bit RPMs, run the commands in the following order:

rpm -Uvh-nodeps srvadmin-hapi- . .x86_64.rpm

rpm —Uvh command-configure-<version>-<build number>.<RHEL Version>.x86_64.rpm

Upgrade Dell Command | Configure on Ubuntu Desktop

To upgrade Dell Command | Configure for systems running on Ubuntu Desktop 20.04, 22.04 and 24.04 using a Deb package.

1. Download the command_configure-linux-<version>-<build number>.tar.gz from Support | Dell.
2. Untar da file using the following command: tar -zxvf command-configure_<version>-<build number>.<Ubuntu Version>_amd64.tar.gz
3. Don haɓakawa, gudanar da umarni mai zuwa:
   dpkg -i srvadmin-hapi_<version number>_amd64.deb
   dpkg -i command-configure_<version>-<build number>.<Ubuntu Version>_amd64.deb
4. Don tabbatar da Dokar Dell na yanzu | Sanya sigar, je zuwa tsohuwar hanyar shigarwa kuma gudanar:
   ./cctk –version

Advanced Dell Command | Configure installation scenarios

Wannan babin yana ba da ƙarin bayaniview of advanced installation scenarios for Dell Command | Configure, including secure BIOS configuration and installation in the Windows Preinstallation Environment (Windows PE). These scenarios ensure robust system management and deployment capabilities.

Batutuwa:

• Installing Dell Command | Configure for Dell Command Secure BIOS Configuration
• Dell Command | Configure for Windows Pre installation Environment.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration

Hardware Security Module (HSM) is used as a signing method for the Dell Command Secure BIOS Configuration workflow.

NOTE: Dell Command Secure BIOS Configuration(DCSBC) is not compatible with ARM64-bit systems.

Abubuwan da ake bukata

Dell Command Secure BIOS Configuration with Dell Command | Configure allows you to use any Hardware Security Module vendor to sign the Dell Command Secure BIOS Configuration Server kayatarwa.

Tabbatar cewa an cika waɗannan buƙatun:

• HSM Setup and OpenSSL: Ensure that you have set up your Hardware Security Module (HSM) provider in your environment. It is recommended to use OpenSSL as the open-source signing tool to generate signatures, which can then be used by Dell Command | Configure.
• Update HSMSigning.bat File: You must update the HSMSigning.bat file with a command compatible with your HSM setup. This file is at: C:\Program Files (x86)\Dell\Command Configure\X86_64\HSMSigning.bat. Modify the signature generation command in line 12 according to your HSM provider requirements. The default command is: “%OpensslPath%\openssl.exe” dgst -sha256 -sign “%ObfuscatedKeyPath%\%PrivateKeyName%” -out “%outlocat%\blobsignature.txt” %1 . Ensure that the command you provide generates the signature in the same path as specified in the default command, with the filename set as blobsignature.txt. Do not modify the last option %1, as it allows the signature command to accept the payload file that is generated by Dell Command | Configure during runtime for signing.

Installing Dell Command | Configure for Dell Command Secure BIOS Configuration Server

To install Dell Command | Configure for use with the Secure BIOS Configuration Server, download the appropriate installer package and follow the setup instructions to enable remote BIOS configuration and policy enforcement.

1. Run Command_Configure.msi from Power Shell in administrator mode.
   Ana nuna mayen shigarwa.
2. Select the Dell Command Secure Bios Configuration Server option.
3. Danna Gaba.
4. Danna Shigar don fara shigarwa.
   The installation completion wizard is displayed.
5. Danna Gama don kammala shigarwa.
   The Dell Secure Configuration Service is created and initiated in the Windows Services tab.
   NOTE: To run Dell Secure Configuration on a particular port, the port must be updated to the appsettings.json file a cikin URL line. Locate the following path: C:\Program Files (x86)\Dell\Command Configure\ABIWindowsService\appsettings.json.
   NOTE: The start time for Dell Command Secure BIOS Configuration varies depending on the platforms—the maximum time limit is set to 2-3 minutes.

Configuring the Dell Command Secure BIOS Configuration Server using HTTPS

The Dell Command | Configure installer configures the Dell Command Secure BIOS Configuration Server for HTTP calls. For added security, you can also configure the Dell Command Secure BIOS Configuration Server using HTTPS on the system where Dell Command Secure BIOS Configuration is installed, by following these steps:

1. Press the Windows key and press the R key to launch the Run dialog box.
2. Type Services.msc and then press Enter to open Windows Services.
3. Locate Dell Secure Configuration Service.
4. Right-click Dell Secure Configuration Service, and click Stop.
5. Go to the Dell Command | Configure installation path C:\Program Files (x86)\Dell\Command
   Configure\ABIWindowsService\appsettings.json, and modify the appsettings.json file tare da wadannan:
   {
   “Logging”: {
   “LogLevel”: {
   “Default”: “Information”,
   “Microsoft.Hosting.Lifetime”: “Information”
   }
   },
   “Kestrel”: {
   “Endpoints”: {
   “HttpsInlineCertFile”: {
   "Url”: “< URL:Port>”,
   “ClientCertificateMode”: “AllowCertificate”,
   “Certificate”: {
   “Path”: “<Https certificate complete path>”,
   “Password”: “<Https Cert Password>”
   }
   }
   }
   }
   }
   NOTE: The certificate to be provided must be associated to the Url specified in the same field. Also, specify the Client Certificate Modeas Allow Certificate to allow Dell Command Secure BIOS Configuration server to function without any issues. You must specify the complete Path for the Https certificate and the Password for authenticating the Https Certificate. The Password can be left empty if the Https certificate does not require a password authentication.
6. Save changes to the appsettings.json file and start the Dell Secure Configuration Service from Windows Services.
   NOTE: There are other ways as well to configure an HTTPS Server. For more details, see Configure endpoints for the ASP.NET Core Kestrel web server and Client Certificate Mode Enum.

Dell Command | Configure for Windows Preinstallation Environment

Windows Preinstallation Environment (WinPe) provides a stand-alone preinstallation environment that is used to prepare a system for Windows installation. For client systems that do not have an operating system that is installed, you can create a bootable image that contains Dell Command | Configure to run the Dell Command | Configure commands on Windows PE. To create Windows PE 10.0, and Windows PE 11.0 images, you can use Windows Assessment and Deployment Kit (Windows ADK).

Using Windows PE 10.0, and Windows PE 11.0, you can integrate Dell Command | Configure.

NOTE: Dell Command | Configure 5.x for Windows Preinstallation Environment is not compatible with ARM64-bit systems.

Ƙirƙirar yanayin shigar da hoton bootable ta amfani da Windows PE 10.0 da 11.0

To create a bootable image using Windows PE 10.0 or 11.0, use the Windows ADK to generate a customized Windows PE environment, then add the necessary tools and drivers before creating a bootable ISO or USB. This environment supports preinstallation tasks such as BIOS configuration and OS deployment.

1. Daga Microsoft website, zazzagewa kuma shigar da Windows ADK akan tsarin abokin ciniki.
   NOTE: Yayin shigarwa zaɓi kawai Kayan Aiki and Windows Preinstallation Environment (Windows PE).
2. From Support | Dell, download and install Dell Command | Configure.
3. Shigar Dell Command | Sanya
4. Haɗa Dokar Dell | Sanya tsarin shugabanci zuwa ISO file don ƙirƙirar hoton ISO mai bootable.

Haɗa Dokar Dell | Sanya tsarin shugabanci zuwa ISO file using Windows PE 10.0/11.0

To integrate the Dell Command | Configure directory into an ISO, copy it to the Windows PE working folder and create the Windows PE 10.0/11.0 image.

1. Shigar da tsarin aiki na Windows 11.
2. Download and install Windows ADK for Windows 10/11 operating system.
3. Create a Windows PE 10.0/11.0 image.

Creating a Windows PE 10.0/11.0 image

1. Browse to the following location:.
   ● For 32-bit systems, C:\Program Files(x86)\Dell\Command Configure\X86.
   ● For 64-bit systems, C:\Program Files (x86) Dell\Command Configure\X86_64.
2. Buɗe faɗakarwar umarni tare da gata mai gudanarwa.
3. Run the following command: .
   ● Windows PE 10.0
   ○ For 32-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_10.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   ● Windows PE 11.0
   ○ For 32-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86 C:\Progra~2\Dell\Comman~1.
   ○ For 64-bit systems, cctk_x86_64_winpe_11.bat C:\winpe_x86_64 C:\Progra~2\Dell\Comman~1.
   NOTE: Tabbatar cewa hanyar da aka yi amfani da ita a cikin umarnin ita ce ta Dell Command | Sanya babban fayil.
4. Copy the ISO image to the following location:
   ● For 32-bit systems, C:\winpe_x86\WIM.
   ● For 64-bit systems, C:\winpe_x86_64\WIM.

Albarkatu da tallafi

Kuna iya samun dama ga takaddun da ake buƙata ta zaɓi samfurin ku.

1. Je zuwa Taimako | Dell.
2. Danna Nemo duk samfuran.
3. Danna Software & Solutions.
4. Danna Gudanar da Tsarin Abokin Ciniki.
5. Danna Dell Command | Configure.
6. Danna Select This Product.
7. Zuwa view takardun da ake buƙata, danna sunan samfurin da ake buƙata da lambar sigar.

NOTE: Idan ba ku da haɗin Intanet mai aiki, za ku iya samun bayanin lamba game da daftarin siyan ku, daftarin tattara kaya, lissafin kuɗi, ko kundin samfuran Dell.

Dell provides several online and telephone-based support and service options. Availability varies by country or region and product, and some services may not be available in your area. To contact Dell for sales, technical support, or customer service issues:

1. Je zuwa Tallafi | Dell.
2. Zaɓi nau'in tallafin ku.
3. Tabbatar ƙasarku ko yankinku a cikin Zaɓi Ƙasa/Yanki jerin zaɓuka a ƙasan shafin.
4. Zaɓi sabis ɗin da ya dace ko hanyar haɗin gwiwa dangane da buƙatar ku.

Takardu / Albarkatu

DELL Command Configure Software [pdf] Manual mai amfani Command Configure Software, Configure Software, Software

Magana

• Manual mai amfani