Jagoran Fara Mai Sauri
ELITEpro™ XC da
ELOG™ Software

ELITEpro XC Logger Data Logger

MUHIMMI: Kada ku haɗa ELITEpro XC zuwa kwamfutarka har sai kun shigar da software na ELOG.

ELITEXC pro SAFETYSUMMARY da BAYANI

Wannan bayanin aminci na gabaɗaya dole ne a yi amfani da shi ta hanyar ma'aikacin Logger da ma'aikatan sabis. DENT Instruments, Inc. girma ba shi da alhakin gazawar mai amfani don bin waɗannan ƙa'idodin aminci.

Ya yi daidai da UL Std 61010-1 Tabbacin zuwa CSA Std C22.2 No. 61010-1

ELITEpro XC™ over-Voltage Category III na'urar. Yi amfani da safofin hannu na roba da aka amince da su tare da kariyar injina da tabarau lokacin aiki da na'urar.
HANKALI: Wannan LOGGER na iya ƙunsar barazanar rai voltage. CANCANCI MUTUM Dole ne katse haɗin duk wani babban voltage wayoyi kafin amfani ko yin hidimar LOGGER.
Gargadi: Yin amfani da wannan na'urar ta hanyar da ba a yi niyya ba na iya lalata hanyoyin kariya.
ALAMOMIN KAYAN AIKI
Yana nuna taka tsantsan. Duba littafin jagora don bayanin ma'anar.
Lokacin haɗa ELITEpro XC zuwa nauyin AC, bi waɗannan matakan a jere don hana haɗarin girgiza.
1. Idan za ta yiwu, cire kuzarin da'irar don a sa ido.
2. Haɗa CTs zuwa matakan da ake kulawa.
3. Haɗa voltage yana kaiwa ga matakai daban-daban. Yi amfani da ingantaccen kayan aikin aminci (safofin hannu, abin rufe fuska, da tufafin kariya) kamar yadda ake buƙata don voltage kula.
  Hadarin girgiza wutar lantarki. barazanar rayuwa voltages iya kasancewa. ƙwararrun ma'aikata kawai.
KAR KA WUCE 600V Mataki zuwa Mataki. Wannan logger an sanye shi don lura da lodi har zuwa 600V. Ya wuce wannan voltage zai haifar da lalacewa ga logger da haɗari ga mai amfani. Koyaushe yi amfani da Mai Canjin Canji (PT) don lodi fiye da 600V. ELITEpro XC shine 600 Volt Sama da Voltage Category III na'urar.
Zubar da kyau.
A ciki: 6-10 VDC, 500mA
Fita: 6 VDC, 200 mA iyakar
tashar USB

IYAKA NA SENSOR

AMFANI DA RUWAN CANJIN YANZU KAWAI (CTs).
Kada a yi amfani da wasu CTs. Yi amfani da shunted CTs tare da matsakaicin fitarwa na 333mV kawai. Mummunan hatsarin girgizawa da lalacewar katako na iya faruwa idan an yi amfani da CT ba tare da kariya ba. Jerin UL ya ƙunshi amfani da waɗannan kayan aikin DENT CTs waɗanda UL Gane kuma an kimanta su zuwa IEC 61010-1:
CT-RGT12-XXXX (tsararrun tsakiya), CT-SRS-XXX (tsaga tsakiya), CT-HSC-020-X (20A Mini), CT-HSC-050-X (50A Mini), CT-HMC-0100- X (100A Midi), CT-HMC-0200X (200A Midi), CT-RXX-1310-U (RōCoil), CTRXX-A4-U (RōCoil), CT-CON-1000X, CT-CON-0150EZ-X da CT-SRL-XXX ko CT's UL da aka jera zuwa UL2808.
Amfani da kowane CT zai lalata UL List na ELITEpro XC.
Pulse: Yi amfani da "bushe lamba" kawai abubuwan shigar da bugun jini mara kuzari (ELITEpro SP kawai). Amfani da masu kunna bugun bugun jini na iya haifar da lahani ga mai yin katako da haɗarin girgiza mai amfani. Waya dole ne ya dace da ƙimar 600V AC CAT III.
An ƙera mitar don auna AC voltages don shigarwa har zuwa 600 VAC. Mitar kuma tana iya auna DC voltages har zuwa 600 VDC tare da fa'idodin masu zuwa:

1. Fuus ɗin ciki da aka sanya a cikin mita tare da lambobin serial kafin XC1703xxx ba dace da cire haɗin kai don vol.tagsama da 80 VDC. Abokan ciniki suna amfani da mita don babban voltage DC tsarin dole ne shigar da UL da aka jera a layi na 600 volt DC fuse tare da ƙimar 1 amp ko ƙasa da haka. Waɗannan fis ɗin ana samun su a kasuwannin hasken rana.
2. An gudanar da gwajin UL na ELITEpro XC akan tsarin AC kawai. Sakamakon DC yana da kwatankwacinsa amma ba a gwada shi ba.

Kayan aiki an kiyaye su ta hanyar rufi biyu (IEC 536 Class II). CAT III 80-600 VAC 125mA 50/60 Hz

KIYAWA

Babu buƙatar kulawa tare da ELITEpro XC. Bi waɗannan abubuwa:
Tsaftacewa: Ba za a yi amfani da abubuwan tsaftacewa ba, gami da ruwa, akan ELITEpro XC.
Rayuwar Baturi: Batir lithium ana amfani dashi kawai don kiyaye saitunan kwanan wata da agogo yayin gazawar wutar lantarki kuma yana da tsawon rayuwa sama da shekaru 10. Tuntuɓi kayan aikin DENT don sabis.
Babu na'urorin haɗi da aka yarda don amfani tare da ELITEpro XC ban da waɗanda aka ƙayyade a cikin littattafan samfuran DENT Instruments da takaddun farashi.
Idan logger ya bayyana lalacewa ko mara kyau, da farko cire haɗin duk wuta da na'urori masu auna firikwensin. Kira ko imel goyon bayan fasaha don taimako.
Kayan aikin DENT
Bend, Oregon Amurka
Waya: 541.388.4774
DENTinstruments.com
Imel: support@DENTinstruments.com
ELITE pro XC™ BAYANIN FASAHA

Ƙayyadaddun bayanai	Bayani
Nau'in Sabis	Waya Hanya Daya-Biyu, Waya Hanya Daya-Uku, Waya Hanya Uku-Hudu (WYE), Waya Hanya Uku-Uku (DELTA), Tsarin DC (solar, baturi)
Voltage Channels	3 tashoshi, CAT III, 0-600 VAC (layi-zuwa-layi) ko 600 VDC
Tashoshi na yanzu	4 tashoshi, .67 VAC max, +/- 1 VDC max; manufa don 333 mV cikakken sikelin CTs
Matsakaicin shigarwar tashoshi na yanzu Voltage	Na'urar transducer na waje; 200% na ƙimar transducer na yanzu (mV CTs); Auna har zuwa 6000A tare da RōCoil CTs
Nau'in Ma'auni	RMS na gaskiya ta amfani da sarrafa siginar dijital mai sauri (DSP)
Mitar layi	DC / 50/60 Hz
Waveform Sampling	12 kHz 200 s kuamples/cycle a 60Hz 240 samples/cycle a 50Hz
Channel Sampling Rate (na ciki sampling)	8Hz ko kowane 125 mSc
Tazarar Bayanai	Tsawon lokacin haɗin kai shine mintuna goma sha biyar. Zaɓuɓɓukan sune 1, 3, 10, 15, 30 seconds; 1, 2, 5, 10, 15, 20 da minti 30; 1 da 12 hours; kwana 1. Wannan yana gaya wa mai shigar da bayanai a wane lokaci ne za a adana bayanan tazara a cikin ƙwaƙwalwar ajiya. Don misaliampHar ila yau, idan an saita lokacin haɗin kai na minti 30 kuma ana kula da matsakaicin watts, to kowane minti 30 mai shiga yana yin rikodin matsakaicin amfani da wutar lantarki (watts) na wannan tashar sama da tazarar minti 30 da ya gabata, dangane da kusan ma'auni 14,400 na sa ido. zana wutar lantarki. Idan ana yin rikodin ƙima mafi girma (da/ko mafi ƙasƙanci) na waɗannan karatun 14,400 kuma an adana su.
Ma'aunin Makamashi	Volts, Amps, Amp-Hrs (Ah), kW, kWh, kVAR, kVARh, kVA, kVAh, Maɓallin Ƙarfin Maɓalli (dPF). Duk sigogi don kowane lokaci kuma don jimlar tsarin.
Ma'aunin Analog	0-10 Volts, 0 ko 4-20 ma madauki na yanzu ba ware ba, ikon waje don madauki na yanzu. Ƙimar mai amfani don ba da rahoton firikwensin a cikin sassan jiki.
Daidaito	Fiye da 1% (<0.2% na al'ada) na V, A, kW, kVAR, kVA, PF
Ƙaddamarwa	0.01 Amp, 0.1 Volt, 0.1 Watt, 0.1 VAR, 0.1 VA, 0.01 PF, 0.01 ANA

Ƙayyadaddun bayanai	Bayani
LED Manuniya	Launuka uku (ja, kore, da shuɗi): 1 LED don nuna sadarwa, LEDs 4 don daidaitaccen lokaci (kore lokacin vol.tage da kuma halin yanzu a kan lokaci guda; ja lokacin da aka yi kuskure ba daidai ba, blue don mara waya, da Ethernet).
Sadarwa
USB (Standard)	Matsayin USB (Nau'in B). 1.8M (6 FT) Kebul na USB A-zuwa B (an haɗa)
ETHERNET (Standard)	Standard RJ-45 Connector yana goyan bayan 10/100 MB Ethernet akan Cat 5 ko mafi kyau. Sanya adireshin IP na DHCP ko Static.
ADAPTER Wi-Fi (Na zaɓi)	Adaftar Wi-Fi na ciki tare da saiti guda biyu: Eriya ta ciki: yanayi na yau da kullun <75ft har zuwa 300ft na waje 5 dbi eriyar: yanayi na yau da kullun <150ft har zuwa 300ft
Ƙarfi
Samar da Wutar Layi	Daga Matakin L1 zuwa Matakin L2. 80-600V (AC ko DC) CAT III DC/50/60Hz, 125mA, 5W, ko 10 VA max. Mara amfani mai maye gurbin .5 Amp na ciki fuse kariya.
Wutar Wuta (na zaɓi)	Matsakaicin 6-10 VDC, mafi ƙarancin 500mA
Makanikai
Yanayin Aiki	-7 zuwa +60°C (20 zuwa 140°F)
Danshi	5% zuwa 95% ba mai haɗawa ba
Yadi	ABS filastik, 94-V0 flammability rating
Nauyi	340 g (ozaji 12, ban da na'urori masu auna firikwensin da jagora)
Girma	69 x 58 x 203 mm (2.7" x 2.2" x 8.0")
Mafi ƙarancin Bukatun Tsarin
Tsarin Aiki	Windows® 10, Windows® 8, ko Windows® 7 (32 ko 64 bit)
Mai sarrafawa	Pentium Class 1 GHz ko fiye da shawarar
Hard Drive	50 MB mafi ƙarancin samuwa
Tashar Sadarwa	Ana buƙatar tashar USB ɗaya don haɗin shiga da shigar da software na ELOG

Jagorar farawa mai sauri yana ba ku saiti da aiki tare da sabuwar ELITEpro XC da software na ELOG kuma ana ba da shawarar ga waɗanda ke da gogewa da kayan aikin DENT ko kuma sun saba da samfuran aunawa da hanyoyin.
Don saita ELITEpro XC don kowane zaman sa ido dole ne a kammala abubuwa masu zuwa:

1. Dole ne a haɗa Masu Canjin Yanzu (CTs) zuwa ɗaya ko fiye na abubuwan shigar tashoshi (sai dai idan an yi voltage-kawai ma'auni).
2. Layin layitage dole ne a yi haɗin kai don kowane voltage ko ma'aunin wutar lantarki duka don dalilai na aunawa kuma don kunna ELITEpro XC.
3. Teburin Saita wanda ke gaya wa mita yadda da abin da za a auna dole ne a ƙirƙira a cikin software na ELOG kuma a loda shi cikin ELITEpro XC.

Don kammala wannan Saurin Farawa, ba kwa buƙatar haɗa ELITEpro XC zuwa ainihin kaya. Kuna iya yin saitin izgili a teburin ku don sake sakewaview yadda software da logger ke aiki tare. Ba a buƙatar haɗin haɗin mitar don daidaita fahimtar mita yayin da suke kan tebur (mita, kebul na USB, da PC kawai ake buƙata don daidaitawa na asali).
Bayanin da ke ƙunshe a sashe na gaba an bayar da shi azaman exampLe kan yadda ake saita lokaci guda, zaman ma'aunin wutar lantarki mai waya 2 ta amfani da software na ELITEpro XC da ELOG. Yi amfani da wannan azaman jagora don aikin sa ido na kanku.
Shigar da ELOG Software da Kebul Driver

1. Saka sandar ƙwaƙwalwar USB ta ELOG cikin tashar USB.
   Bincika zuwa sandar ƙwaƙwalwar ajiya kuma nemo shirin ELOGinstaller.exe. Fara mai sakawa ta danna sau biyu ELOGinstaller.exe.
   Yi matakan saitin akan allo.
2. Shigar da direban ELITEpro XC akan kwamfutarka.
   Idan kwamfutarka tana da tashoshin USB da yawa, ana iya buƙatar mataki na 2 ga kowane tashar USB da ELITEpro XC ke shigar ciki.
   a) Haɗa kebul na USB zuwa tashar USB
   akan kwamfutarka, saka ɗayan ƙarshen a cikin tashar USB akan ELITEpro XC. Idan za a yi amfani da kebul na USB a cikin na'urar lantarki dole ne a ƙididdige shi zuwa daidai voltage ko an nannade shi a cikin madaidaicin madaidaicin hannun riga mai rufewa. Kebul ɗin da aka kawo DENT baya cika wannan buƙatun ba tare da hannun riga mai rufewa ba.
   b) Yi matakan saitin akan allo. Dole ne ku ƙyale ELOG ya shigar da direba don ELITEpro XC yayi aiki daidai.
   c) Idan shigarwar direban ya gaza, duba sashin Shigar da Direbobi na matsala na ELITEpro XC/ELOG Jagorar Aiki.
3. Ajiye kwamfutar a gefe kuma ku ci gaba da sashe na gaba.

Saita ELITEpro XC don Mataki ɗaya, 2-Wire
1) Haɗa Current Transformers (CTs) zuwa wayoyi na nauyin da kuke aunawa. Gabatar da CT ta yadda kibiyar da ke kan yanayin CT ta yi nuni zuwa ga lodi.
NOTE: Yi amfani da CTs masu aminci na 333mV kawai wanda DENT ke bayarwa. Kar a taɓa amfani da CTs masu fitarwa na yanzu.
Jerin UL ya ƙunshi amfani da waɗannan kayan aikin DENT CTs waɗanda UL Gane kuma an kimanta su zuwa IEC 61010-1:
CT-RGT12-XXXX-Y, CT-HSC-020-X (20A Mini), CT-HSC-050-X (50A Mini), CT-HMC-0100-X (100A).
Midi), CT-HMC-0200-X (200A Midi), CT-Rxx-1310-U (RōCoil), CTRxx-A4-U (RōCoil), CT-CON-1000-X, da CT-CON-0150EZ -X ko CTs waɗanda aka jera UL zuwa UL2808. Amfani da kowane CT zai lalata UL List na ELITEpro XC.
2) Haɗa Transformer na Yanzu zuwa ELITEpro XC.
Haɗa CTs zuwa masu haɗin baƙar fata (Phoenix-style) akan ƙarshen ƙarshen ELITEpro XC. Fara da hagun-mafi yawan haɗin haɗin gwiwa wanda shine Channel One.

• Babban (+) waya na CT (farar, banded, ko waya mai lamba dangane da nau'in CT) yakamata ya je gefen hagu (+) dunƙule tashoshi na kowane tashar tashar.
• Ƙarƙashin (-) CT waya (baƙar fata ko mara waya) ya kamata ta shiga cikin dama (-) screw terminal na shigarwar tashar.
• Idan kana amfani da RōCoil CTs, tabbatar da haɗa waya mara amfani zuwa tashar "S" (garkuwa). Wannan yana rage tsangwama kuma yana inganta daidaiton CT.

An ƙididdige ELITEpro XC don 600V Over-Voltage Category III. CAT III shine don ma'auni da aka yi a cikin ginin. ExampLes sune ma'aunai akan allunan rarrabawa, masu watsewa da'ira, wiring gami da igiyoyi, sandunan buss, akwatunan mahaɗa, maɓalli, da wuraren faɗuwa a cikin ƙayyadadden shigarwa, da kayan aiki don amfanin masana'antu. Sauran kayan aikin na iya haɗawa da injuna na tsaye tare da haɗin dindindin zuwa kafaffen shigarwa. Yi voltage haɗe-haɗe (L1, L2, da N): Haɗa kowane jagora ɗaya-a-lokaci zuwa panel sannan zuwa mita. Maimaita har sai duk abin da ake buƙata voltage jagororin suna hade. A cikin wannan yanayin, ba a amfani da L3 kuma ana iya keɓe shi a gefe.
Wani lokaci lokacin haɗa L1 da L2 ana iya lura da ƙaramin tartsatsi. Wannan al'ada ce kuma ba zai lalata mita ba.
Sadarwa tare da ELITEpro XC

1. Haɗa PC zuwa ELITEpro XC ta amfani da kebul na USB.
   ELITEpro XC yana ƙaddamar da ELOG ta atomatik kuma ya haɗa zuwa PC. Idan ba haka ba, je zuwa mataki na 2 don ƙaddamar da ELOG sannan zaɓi madaidaicin tashar USB daga menu na saukar da tashar jiragen ruwa dake cikin taga ELOG PC Setup ƙarƙashin Tools tab. Don ƙarin bayani game da tashoshin jiragen ruwa na abokantaka, duba sashin Sadarwa na cikakken ELITEpro XC/ELOG Jagorar Aiki.

Danna sau biyu akan gajeriyar hanyar ELOG akan tebur na Windows®. (ELOG ya dace da Windows® 10, Windows® 8, da Windows® 7 (32 ko 64 bit), amma ba tsofaffin nau'ikan Windows ba, gami da Windows® XP.)
Ƙirƙiri Teburin Saita don Mataki ɗaya, Load ɗin Waya 2
A cikin wannan matakin zaku ƙirƙiri Teburin Saita wanda zai gaya wa ELITEpro XC abin da za a auna, sau nawa, da sauransu.

1. Zaɓi File > Sabo > Teburin Saita File kuma danna Ok.
   Lokacin da aka haɗa kwamfutarka zuwa ELITEpro XC, software na ELOG yana ɗaukar sabon saitin file na na'urar da aka haɗa ne. Zaɓin Sabbin yana nuna Teburin Saita tare da tsoffin sigogi.
   Idan babu ELITEpro XC ko wasu logger da aka haɗa zuwa kwamfutar, akwatin maganganu na Zaɓi A Setup Type Type, tare da ELITEpro XC azaman tsoho. Danna Ok.
2. A cikin Wurin Saitunan Sauri na akwatin maganganu, danna maɓallin Saurin Waya Single Phase 2
   Akwatin maganganu na Zaɓin CT yana nuna maka don shigar da ƙimar CT kuma buga, ko dai ta hanyar View Duk faɗuwar menu ko shigar da bayanan CT da hannu. Danna Ok.
3. Shigar da bayanin mai zuwa:
   Saita Tazarar Bayanai zuwa Minti 1 (ko wani kamar yadda ake so).
   Saita Mitar Layi zuwa 50Hz ko 60Hz.
   (Na zaɓi) shigar da "Saitunan Fara Sauri" a cikin Sunan Teburin Saita.
   Idan baku zaɓi/canza dabi'u a cikin taga zaɓin CT ba, ko dai ta cikin Menu na Nau'in sauke ƙasa ko da hannu shigar da ƙimar mai canzawa (CT) daidai da CT ɗin da aka zaɓa idan ya bambanta da ƙimar tsoho na 100A. Ƙimar CT ita ce madaidaicin matsakaicin shigarwa (na farko) ƙimar CT a ciki Amps kuma an buga shi akan CT.
   Shigar da canjin lokaci (idan an san shi kuma idan ya bambanta da ƙimar tsoho na 1.1°) don CT ɗin da aka zaɓa. Ko zaɓi CT daga cikin maganganun CT List (ana samun dama ta atomatik daga zazzagewar "Nau'in").
   (Na zaɓi) Danna cikin akwatin da ke ƙarƙashin Suna kuma rubuta "Load 110V" don kwatanta nauyin. Danna ƙasan kibiya zuwa dama na filin Volts kuma danna Matsakaici (ko wasu sigogi don yin rikodin yadda ake so). Maimaita zaɓi don Amps, kW (kilowatts), kVA (kilovolt-amps), PF (power factor), da kVAR (kilovolt-amps reactive). Kuna iya zaɓar kowane haɗin ƙima don yin rikodin: Matsakaici, Mafi ƙanƙanta, Matsakaicin matsakaici, da Haɗe-haɗe (misali, kWh).
4.  Zaɓi File > Ajiye Kamar… don ajiye Saitin Teburin zuwa rumbun kwamfutarka. Sunan tebur “Sample” sannan danna Save.
5. Bayan haɗawa da logger, danna ɗaya daga cikin SEND SETUP TABLE zuwa maɓallan umarni na Logger akan allon Setup Table. Akwai maɓallai dabam dabam a sama da ƙananan hagu na allon Saita. Aika sabon Teburin Saita zuwa mai shiga yana goge duk wani bayanan da har yanzu aka adana a cikin mai shiga. ELOG yana nuna akwatin maganganu masu zuwa don tabbatar da bayanan da ake so ba a rasa ba:
6. Danna Aika SUT kuma Share Data. Wannan yana loda sabon Teburin Saita a cikin mita kuma yana share bayanai a cikin logger. Shigar yanzu yana kan akwatin maganganu a takaice. -ko-
   Danna Download Data sannan Aika SUT. Akwatin maganganu na Zaɓi A Directory da Sunan…. Shigar da suna da wurin bayanan file. Bayan an zazzage bayanan zuwa PC kuma an adana su, ELOG yana aika sabon Teburin Saita ta atomatik zuwa mita kuma ya fara shiga.
   -ko-
   Danna Cancel.

ELOG yana fara shiga ta atomatik lokacin da aka zazzage Teburin Saita zuwa Logger sai dai idan ana amfani da jinkirin lokacin farawa.

View Dabi'un Lokaci na Gaskiya da Mai da Bayanan Logger

1. Zaɓi Logger > Nuna Ƙimar-Tsawon Lokaci > Nuna azaman Rubutu zuwa view ƙimar ainihin lokacin da aka auna ta hanyar logger.
   Har sai an haɗa logger zuwa kaya na gaske, Ƙimar Lokaci na Gaskiya da kuke gani a cikin ELOG za su wakilci "amo" kuma ba za su kasance masu ma'ana ba. Koyaya, ƙila har yanzu kuna son sanin kanku da nau'in bayanan da ke akwai kafin ku shiga cikin filin.

Da zarar an haɗa zuwa ainihin kaya, ƙyale mai shiga ya tattara bayanai da yawa na mintuna. Sa'an nan kuma sakeview bayanan da aka tattara don tabbatar da cewa karatun yana da ma'ana don saitin ku. Ana iya adana bayanan da aka tattara azaman .elog file a kan rumbun kwamfutarka.
2) Zaɓi Logger> Mai da Data Daga Logger…
a) Shigar da bayanai file suna da babban fayil don adana bayanai ko amfani da abubuwan da suka dace.
b) Danna Ajiye. Ana dawo da bayanan daga mai shiga kuma idan an gama, bayanan da aka zazzage suna nunawa ta atomatik.
3) Zaɓi Data > Data File Ƙididdiga > Data File Takaitacciyar zuwa view taƙaitaccen bayanin bayanan.
Zaɓi Bayanai > Ƙirƙiri Sabon Hotuna… umarni don yin jadawali na bayanan.
ELITEpro XC ba shi da ƙarfin baturi na ciki. Madadin haka, ana iya kunna ELITEpro XC ɗaya daga cikin hanyoyi uku:

1. Ƙarfin Layi: Ƙaddamar da logger yana faruwa ta atomatik lokacin da L1 da L2 voltage connections an yi. Yawanci ana yin amfani da logger a cikin filin yayin aikin aunawa.
2. Haɗin USB: Hakanan ana kashe mai shigar da hanyar haɗin kebul yayin da ake haɗa shi da kwamfuta. Wannan ya dace don lokacin da kake saita logger a ofis don sabon aiki.
3. Ƙarfin bango: Hakanan za'a iya ba da wutar lantarki ta amfani da injin bango na zaɓi. Wannan na iya zama dole lokacin ɗaukar ma'auni na yanzu-kawai.

Don ƙarin bayani game da ikon ELITEpro XC, da fatan za a tuntuɓi littafin ELITEpro XC wanda kuma za'a iya samuwa a ƙarƙashin menu na "Taimako" a cikin ELOG ko akan kayan aikin DENT. website.

MAGANAR GARANTIN KAYAN HAKAN

DENT Instruments, Inc. yayi alƙawarin mai siye cewa duk wani samfurin da DENT Instruments, Inc. ya sayar ba zai kasance mai 'yanci daga lahani a cikin ƙira, kayan aiki, ko masana'anta na tsawon lokacin da aka nuna akan takardar bayanan na yanzu na wannan samfurin wanda ya fara daga ranar ƙira; amma, garantin ba zai ƙara zuwa lalacewa da tsagewa na yau da kullun ba, ko ga abubuwan da za'a iya maye gurbinsu (misali, batura da abubuwan firikwensin zafi). A cikin lokacin garanti, DENT Instruments Inc. na iya gyara ko musanya (da gairarsa kawai) duk wani samfurin da ke fama da lahani na garanti kuma ya dawo da kayan da aka rigaya ya biya ta mai siye, ba tare da cajin mai siye ba don kowane garanti na gyara ko sauyawa. Garanti zai kasance cikin cikakken ƙarfi da tasiri na wannan lokacin, in dai samfurin: (1) an shigar, sarrafa, da kiyaye shi yadda ya kamata; (2) ba a cin zarafi ko amfani da shi ba; (3) ba a gyara, canza, ko gyaggyarawa a wajen wuraren da aka ba da izini na Kayan aikin DENT; (4) ba a siyar da shi bisa wasu sharuɗɗan garanti da aka ƙayyade a lokacin siyarwa ba. Wannan garantin yana ba da takamaiman haƙƙoƙin doka waɗanda dokokin gida zasu iya bambanta.
ELITEpro Series da Na'urorin haɗi
Mai siyarwa ya ba da garanti ga mai siye cewa samfuran ELITEpro Series da na'urorin haɗi ko sabis ba su da ƙarancin lahani a cikin kayan aiki da aiki na yau da kullun da aka bayar kafin shigarwa da kiyayewa na tsawon shekara 1 (watanni 12) bayan bayarwa.
IYAKA GA garanti
GYARA LABARAN GYARA, MUSA, HIDIMAR KO KYAUTA ZAI ZAMA A ZABI NA MAI SALLA DA CIKAR DUK WAJIBI NA MAI SAYA DON WARRANTI.
Mai siyarwa baya ɗaukar wani garanti dangane da lahani a cikin samfur wanda ya haifar da: (a) gyare-gyare, gyara, shigarwa, aiki ko kiyaye samfurin ta kowa banda mai siyarwa ko wakilinsa, sai dai kamar yadda aka bayyana a cikin takaddun mai siyarwa; ko (b) sakaci ko wasu rashin amfani da samfur.
Sauran kayan aikin masana'anta da mai siyarwa ya siya kuma aka sake siyar dashi ga mai siye za'a iyakance shi ga garantin masana'antun. Mai siyarwa baya ɗaukar alhakin garanti ga sauran kayan aikin masana'anta waɗanda mai siye ya samar.
Babu wani wakili, mai rarrabawa, ko wakili da aka ba da izini don yin kowane garanti a madadin Mai siyarwa ko ɗaukar wani abin alhaki dangane da kowane samfur ko sabis don Mai siyarwa.
RASHIN WARRANTI
Mai siye ya fahimta kuma ya yarda kamar haka:
Garantin da ke sama yana maye gurbin DUKAN GARANTI, BAYANI KO BANZA, & DUK WAJIBI KO WAJIBI NA MAI SALLA, gami da kowane garantin ciniki da dacewa don takamaiman dalili. DUK WASU GARANTIN GARANTIN DA AKE CIN WARWARE KUMA MAI SALLA. ABIN DA YAKE GABATARWA ZAI ZAMA GUDA GUDA DA MAGANIN BAYANI KO A cikin kwangila, azabtarwa, ko in ba haka ba, & MAI SALLA BA ZAI IYA HANNU DON RASHIN CUTARWA KO LALATA BA. WANNAN IYAKA YA YI AMFANI DA DUKAN SAMUN SAUKI DA KYAUTATA A LOKACIN WARRANTI DA BAYAN.
IYAKA MAGANIN
BABU WANI FARKO MAI SALLA BA ZAI IYA HANNU GA DUK WANI LAFIYA NA MUSAMMAN, MAFARKI KO SAKAMAKO BA, KO RASHIN CINIKI KODA ANA SHAWARAR DA MAI SALLAR YIWUWAR HAKA.

BAYANI BAYANI

A. Mai siyarwa yana da haƙƙin ƙaddamar da duk wani takalifi a nan.
B. Babu wani rangwame da zai yi aiki sai dai a rubuce kuma ba a ba da izini ba da zai saki mai siye daga ƙaƙƙarfan yarda da wannan.
C. Mai siyarwa ba shi da alhakin gazawa ko jinkirta cikar wajibai a ƙarƙashin waɗannan Sharuɗɗa da Sharuɗɗa saboda dalilai da suka wuce ikonsa.
D. Dokokin Jihar Oregon, Amurka za su shafi duk ma'amaloli a nan. Duk wani aiki da aka yi a nan za a kawo shi a cikin gundumar Deschutes, a cikin Jihar Oregon, Amurka Duk wani da'awar, sai dai rashin biyan kuɗi, za a kawo shi cikin shekara ɗaya na jigilar kayayyaki ko kammala ayyuka kuma mai siye zai kasance abin dogaro ga kowane farashi na tarawa ko kuɗin lauya.
E. Dole ne a gabatar da da'awar odar da ba ta dace ba a cikin kwanaki 30 daga ranar jigilar kaya.
F. Waɗannan Sharuɗɗa & Sharuɗɗa tare da Yarda da Odar Mai siyarwa sun ƙunshi duka yarjejeniya tsakanin ɓangarorin game da batun nan da maye gurbin duk wata yarjejeniya ta zamani ko wakilci a rubuce ko na baka. Duk wani gyara anan dole ne a rubuta shi kuma mai siyarwa ya sanya hannu.
Sabis da Taimako don Samfuran Kayan Aikin DENT
Kafin kira, tuna cewa ana amsa tambayoyi da yawa a cikin Jagorar Mai aiki don samfurin ku. Har ila yau, akwai cikakkun bayanai game da samfurin website. Idan kuna da matsala tare da samfurin ku na DENT wanda ba za ku iya warwarewa ba, da fatan za a lura da waɗannan bayanan. Kafin tuntuɓar Tallafin Fasaha na DENT, lura da Model Sunan da Serial Number don samfurin ku. Hakanan ya kamata ku kasance cikin shiri don lissafa bayanan hardware da software na PC ɗinku da kayan aikin da ke da alaƙa.

BUKATAR TAIMAKON FASAHA?
Kira: 541.388.4774 ko 800.388.0770
Imel: support@dentinstruments.com
Sabuntawa: Nuwamba 15, 2024
Kayan Aikin Haƙori | 925 SW Emkay Dr. | Bend, Oregon 97702 Amurka
Waya 541.388.4774 | Fax 541.385.9333 | www.DENTInstruments.com
TUNTUBE KAYAN HAKAN GOYON BAYAN FASAHA
541.388.4774 ko 800.388.0770
SUPPORT@DENTINSTRUMENTS.COM
WWW.DENTINSTRUMENTS.COM

Takardu / Albarkatu

DENT Instruments ELITEpro XC Mai Rarraba Data Logger [pdf] Jagorar mai amfani ELITEpro XC Logger Data Logger, ELITEpro XC, Logger Data Logger

Magana

• Manual mai amfani