EDA ED-HMI3020-101C Kwamfutoci Masu Ciki

Tuntube Mu
Na gode sosai don siyayya da amfani da samfuranmu, kuma za mu yi muku hidima da zuciya ɗaya.
A matsayinmu na ɗaya daga cikin abokan haɗin gwiwar ƙira na duniya na Rasberi Pi, mun himmatu wajen samar da mafita na kayan aiki don IOT, sarrafa masana'antu, sarrafa kansa, makamashin kore da kuma bayanan ɗan adam wanda ya dogara da dandalin fasahar Raspberry Pi.

Kuna iya tuntuɓar mu ta hanyoyi masu zuwa:
EDA Technology Co.,LTD
Adireshi: Ginin 29, No.1661 Babban Titin Jialuo, Gundumar Jiading, Shanghai

Wasiku: sales@edatec.cn
Waya: +86-18217351262
Website: https://www.edatec.cn

Goyon bayan sana'a:

• Wasika: support@edatec.cn
• Waya: +86-18627838895
• Wechat: zzw_1998-

Bayanin Haƙƙin mallaka
ED-HMI3020-101C da haƙƙin mallakar fasaha masu alaƙa mallakar EDA Technology Co., LTD. EDA Technology Co., LTD ta mallaki haƙƙin mallaka na wannan takarda kuma tana da haƙƙin mallaka. Ba tare da rubutaccen izinin EDA Technology Co., LTD ba, babu wani ɓangare na wannan takarda da za a iya gyara, rarraba ko kwafi ta kowace hanya ko tsari.

Disclaimer
EDA Technology Co., LTD baya bada garantin cewa bayanin da ke cikin wannan littafin ya kasance na zamani, daidai, cikakke ko na inganci. EDA Technology Co., LTD kuma baya bada garantin ƙarin amfani da wannan bayanin. Idan hasarar kayan ko abin da ba na kayan abu ba ya haifar da amfani ko rashin amfani da bayanan da ke cikin wannan jagorar, ko ta amfani da bayanan da ba daidai ba ko da bai cika ba, muddin ba a tabbatar da cewa niyya ne ko sakaci na EDA Technology Co., LTD, da'awar abin alhaki na EDA Technology Co., LTD ana iya keɓancewa. EDA Technology Co., LTD tana da haƙƙin haɓakawa ko haɓaka abubuwan ciki ko ɓangaren wannan littafin ba tare da sanarwa ta musamman ba.

Gabatarwa

Littattafai masu alaƙa
Duk nau'ikan takaddun samfuran da ke cikin samfurin ana nuna su a cikin tebur mai zuwa, kuma masu amfani za su iya zaɓar su view takardun da suka dace daidai da bukatunsu.

Takardu	Umarni
Bayanan Bayani na ED-HMI3020-101C	Wannan takaddar tana gabatar da fasalulluka na samfur, ƙayyadaddun software da kayan masarufi, girma da lambar tsari na ED-HMI3020-101C don taimakawa masu amfani su fahimci tsarin gaba ɗaya sigogi na samfurori.
Bayanan Bayani na ED-HMI3020-101C	Wannan takaddun yana gabatar da bayyanar, shigarwa, farawa da daidaitawa na ED-HMI3020-101C don taimakawa masu amfani suyi amfani da samfurin mafi kyau.
Bayanan Bayani na ED-HMI3020-101C	Wannan takaddar tana gabatar da zazzagewar OS file, walƙiya zuwa katin SD, Sabunta Firmware, da Haɓaka booting daga SSD na ED- HMI3020-101C don taimakawa masu amfani suyi amfani da samfurin mafi kyau.

Masu amfani za su iya ziyartar masu zuwa webshafin don ƙarin bayani: https://www.edatec.cn

Iyalin Karatu
Wannan jagorar tana aiki ga masu karatu masu zuwa:

• Injiniya Injiniya
• Injiniyan Lantarki
• Injiniyan Software
• Injiniyan Tsari

Umarnin Tsaro

• Ya kamata a yi amfani da wannan samfurin a cikin yanayin da ya dace da ƙayyadaddun ƙira, in ba haka ba yana iya haifar da gazawa, kuma rashin daidaituwar aiki ko lalacewar ɓangarorin da ya haifar da rashin bin ƙa'idodin da suka dace ba su cikin iyakokin tabbacin ingancin samfur.
• Kamfaninmu ba zai ɗauki kowane alhaki na doka don hatsarurrukan amincin mutum da asarar dukiya da ke haifar da aikin samfur ba bisa ka'ida ba.
• Don Allah kar a canza kayan aiki ba tare da izini ba, wanda zai iya haifar da gazawar kayan aiki.
• Lokacin shigar da kayan aiki, wajibi ne a gyara kayan aiki don hana shi faduwa.
• Idan kayan aikin suna da eriya, da fatan za a kiyaye nisa na akalla 20cm daga kayan aiki yayin amfani.
• Kada a yi amfani da kayan tsaftace ruwa, kuma nisantar da ruwa da kayan wuta.
• Ana tallafawa wannan samfurin don amfanin cikin gida kawai.

Shigar da OS

Wannan babin yana gabatar da yadda ake saukar da OS file da flash zuwa katin SD.

• Zazzage OS File
• Mai walƙiya zuwa katin SD

Zazzage OS File
Idan tsarin aiki ya lalace yayin amfani, kuna buƙatar sake zazzage sabuwar sigar OS file da flash zuwa katin SD. Hanyar zazzagewa ita ce: ED-HMI3020-101C/raspios.

Mai walƙiya zuwa katin SD
ED-HMI3020-101C yana farawa tsarin daga katin SD ta tsohuwa. Idan kana son amfani da sabuwar OS, kana buƙatar flash OS zuwa katin SD. Ana ba da shawarar yin amfani da kayan aikin Rasberi Pi, kuma hanyar zazzagewa ita ce kamar haka:

Hoton Rasberi Pi: https://downloads.raspberrypi.org/imager/imager_latest.exe

Shiri:

• An gama zazzagewa da shigar da kayan aikin Rasberi Pi Imager zuwa kwamfutar.
• An shirya mai karanta katin.
• The OS file an samu.
• An sami katin SD na ED-HMI3020-101C.

NOTE:
Da fatan za a kashe wutar kafin saka ko cire katin SD.

1. Nemo wurin katin SD, kamar yadda aka nuna a alamar ja na adadi a ƙasa.
2. Riƙe katin SD ɗin kuma cire shi.

Matakai:

An bayyana matakan ta amfani da tsarin Windows azaman example.

1. Saka katin SD a cikin mai karanta katin, sannan saka mai karanta katin a cikin tashar USB na PC.
2. Bude Hoton Rasberi Pi, zaɓi “ZABI OS” kuma zaɓi “Yi amfani da Kwamfuta” a cikin babban fage.
3. Bisa ga faɗakarwa, zaɓi OS da aka sauke file ƙarƙashin hanyar da aka ayyana mai amfani kuma komawa zuwa babban shafi.
4. Danna "ZABI STORAGE", zaɓi katin SD na ED-HMI3020-101C a cikin "Ajiye", sannan komawa zuwa babban shafi
5. Danna "Gaba", zaɓi "NO" a cikin pop-up "Yi amfani da gyare-gyaren OS?" fanni.
6. Zaɓi "YES" a cikin fage na "Gargadi" don fara rubuta hoton.
7. Bayan an gama rubutun OS, da file za a tabbatar.
8. Bayan an gama tabbatarwa, danna “CIGABA” a cikin akwatin “Rubuta Nasara”.
9. Rufe Hoton Rasberi Pi, cire mai karanta katin.
10. Saka katin SD cikin ED-HMI3020-101C, kuma kunna sake kunnawa.

Sabunta Firmware

Bayan tsarin yana farawa kullum, zaku iya aiwatar da umarni masu zuwa a cikin rukunin umarni don haɓaka firmware da haɓaka ayyukan software.

• sudo dace update
• sudo dace haɓakawa

Ana saita booting daga SSD (na zaɓi)
Wannan babin yana gabatar da matakai don saita booting daga SSD.

• Flashing zuwa SSD
• Saita BOOT_ORDER

Flashing zuwa SSD
ED-HMI3020-101C yana goyan bayan SSD na zaɓi. Idan masu amfani suna buƙatar kora tsarin daga SSD, suna buƙatar kunna hoton zuwa SSD kafin amfani da su.

NOTE:
Idan akwai katin SD a cikin ED-HMI3020-101C, tsarin zai yi taya daga katin SD ta tsohuwa.

Yin walƙiya ta akwatin SSD
Kuna iya yin walƙiya zuwa SSD ta akwatin SSD akan windows PC. Ana ba da shawarar yin amfani da kayan aikin Rasberi Pi kuma hanyar zazzagewa ita ce kamar haka:
Hoton Rasberi Pi: https://downloads.raspberrypi.org/imager/imager_latest.exe

Shiri:

• An shirya akwatin SSD
• An buɗe akwati na na'urar kuma an cire SSD. Don cikakkun ayyuka, da fatan za a koma zuwa Sashe na 2.3 da 2.4 na “Manual ɗin mai amfani ED-HMI3020-101C”.
• An gama zazzagewa da shigar da kayan aikin Rasberi Pi Imager zuwa kwamfutar.
• The OS file an samu, kuma hanyar zazzagewa ita ce: ED-HMI3020-101C/raspios.

Matakai:
An bayyana matakan ta amfani da tsarin Windows azaman example.

1. Shigar da SSD a cikin akwatin SSD.
2. Haɗa tashar USB na akwatin SSD zuwa PC, sannan tabbatar da cewa za a iya nuna SSD akan PC.
   NASIHA: Idan SSD ba za a iya nunawa akan PC ba, zaku iya tsara SSD da farko.
3. Bude Hoton Rasberi Pi, zaɓi “ZABI OS” kuma zaɓi “Yi amfani da Kwamfuta” a cikin babban fage.
4. Bisa ga faɗakarwa, zaɓi OS da aka sauke file ƙarƙashin hanyar da aka ayyana mai amfani kuma komawa zuwa babban shafi.
5. Danna "ZABI STORAGE", zaɓi SSD na ED-HMI3020-101C a cikin "Ajiye", kuma komawa zuwa babban shafi.
6. Danna "Gaba", zaɓi "NO" a cikin pop-up "Yi amfani da gyare-gyaren OS?" fanni.
7. Zaɓi "YES" a cikin fage na "Gargadi" don fara rubuta hoton.
8. Bayan an gama rubutun OS, da file za a tabbatar.
9. Bayan an gama tabbatarwa, danna “CIGABA” a cikin akwatin “Rubuta Nasara”.
10. Rufe Hoton Rasberi Pi kuma cire akwatin SSD.
11. Cire SSD daga akwatin SSD, shigar da SSD zuwa PCBA kuma rufe akwati na na'urar (Don cikakkun bayanai, da fatan za a koma zuwa Sashe na 2.5 da 2.7 na “ED-HMI3020-101C Manual User”).

Mai walƙiya akan ED-HMI3020-101C

Shiri:

• An kunna ED-HMI3020-101C daga katin SD, kuma ED-HMI3020-101C ya ƙunshi SSD.
• The OS file an samu, kuma hanyar zazzagewa ita ce: ED-HMI3020-101C/raspios

Matakai:
An bayyana matakan ta amfani da tsarin Windows azaman example.

1. Cire zip ɗin da aka sauke OS file ("zip" file), sami ".img" file, da kuma adana shi a cikin ƙayyadaddun adireshi na PC na gida, kamar Desktop.
2. Yi amfani da umarnin SCP akan Windows PC don kwafe OS file (.img) zuwa ED-HMI3020-101C.
   1. Shigar da Windows+R don buɗe ayyukan run, shigar da cmd, sannan danna Shigar don buɗe rukunin umarni.
   2. Yi umarni mai zuwa don kwafi OS file (.img) zuwa PI directory na ED-
      • Desktop\2024-01-10-ed-HMI3020-101C_raspios-bookworm-arm64_stable.img: Yana nuna hanyar ajiya na ".img" file a kan windows PC.
      • Pi: Yana nuna hanyar ajiya na ".img" file akan ED-HMI3020-101C (hanya inda ".img" file ana adanawa bayan an gama kwafin).
      • 192.168.168.155: Adireshin IP na ED-HMI3020-101C
3. Bayan an gama kwafin. view "img" da file a cikin kundin adireshi na ED-HMI3020-101C.
4. Danna gunkin da ke saman kusurwar hagu na tebur, zaɓi "Acsories→Imager" a cikin menu, sannan buɗe kayan aikin Rasberi Pi Imager.
5. Danna "ZABI NA'URARA", zaɓi "Rasberi Pi 5" a cikin fare na "Na'urar Rasberi Pi".
6. Danna "ZABI OS", zaɓi "Yi amfani da Custom" a cikin pop-up "Operating System".
7. Bisa ga faɗakarwa, zaɓi OS da aka sauke file a cikin rukunin "Zaɓi hoto", kuma komawa zuwa babban shafi.
8. Danna "Buɗe" don komawa zuwa babban shafi.
9. Danna "ZABI STORAGE", zaɓi SSD na ED-HMI3020-101C a cikin "Ajiye", kuma komawa zuwa babban shafi.
10. Danna "Gaba" kuma zaɓi "NO" a cikin pop-up "Yi amfani da gyare-gyaren OS?".
11. Zaɓi "YES" a cikin pop-up "Gargadi".
12. Shigar da kalmar sirri (rasberi) a cikin pop-up "Tabbata", sa'an nan kuma danna "Gabatar da" don fara rubuta OS.
13. Bayan an gama rubutun OS, da file za a tabbatar.
14. Bayan an gama tabbatarwa, shigar da kalmar sirri (rasberi) a cikin pop-up “Authenticate”, sannan danna “Gaskiya”.
15. A cikin akwatin faɗakarwa "Rubuta Nasara", danna "CIGABA", sannan ku rufe Rasberi Pi Imager.

Saita BOOT_ORDER$

Idan ED-HMI3020-101C ya ƙunshi katin SD, tsarin zai yi taya daga katin SD ta tsohuwa. Idan kuna son saita booting daga SSD, kuna buƙatar saita kayan BOOT_ORDER, wanda ke saita booting daga SSD ta tsohuwa lokacin da ba a saka katin SD ba). Ana adana sigogin kayan BOOT_ORDER a cikin "rpi-eeprom-config" file.

Shiri:

• An tabbatar da cewa ED-HMI3020-101C ya ƙunshi SSD.
• ED-HMI3020-101C an yi booting daga katin SD kuma ana nuna tebur akai-akai.

Matakai:

1. Yi umarni mai zuwa a cikin rukunin umarni zuwa view dukiyar BOOT_ORDER a cikin "rpi-eeprom-config" file.
   "BOOT_ORDER" a cikin adadi yana nuna ma'auni don yin booting, kuma saita ƙimar sigina zuwa 0xf41 yana nuna taya daga katin SD.
2. Yi wannan umarni don buɗe "rpi-eeprom-config" file, kuma saita darajar "BOOT_ORDER" zuwa 0xf461 (0xf461 yana nufin cewa idan katin SD ba a saka shi ba, zai yi boot daga SSD; idan an saka katin SD, zai yi taya daga katin SD.), sannan ƙara ma'auni " PCIE_PROBE=1”. sudo -E rpi-eeprom-config-edit
   NOTE: Idan kuna son yin taya daga SSD, ana ba da shawarar saita BOOT_ORDER zuwa 0xf461.
3. Shigar Ctrl+X don fita yanayin gyarawa.
4. Shigar da Y don ajiyewa file, sannan danna Shigar don fita zuwa babban shafi na rukunin umarni.
5. Kashe ED-HMI3020-101C kuma cire katin SD ɗin.
6. Ƙarfi akan ED-HMI3020-101C don sake kunna na'urar.

Takardu / Albarkatu

EDA ED-HMI3020-101C Kwamfutoci Masu Ciki [pdf] Jagoran Shigarwa ED-HMI3020-101C Kwamfutoci Masu Ciki, ED-HMI3020-101C, Kwamfutoci masu Ciki, Kwamfutoci

Magana

• Manual mai amfani