ESPRESSIF SYSTEMS ESP8684-WROOM-060 ESP32 C2 Module

Ƙayyadaddun samfur

• Samfura: ESP8684-WROOM-06C
• Mara waya mara waya Wi-Fi da Bluetooth LE
• Zaɓuɓɓukan hawa: Sake dawo da siyarwar ko siyar da igiyar ruwa
• GPIOs: 14 akwai a saman dutsen, 5 akwai a tsaye a tsaye
• Eriya: Eriyar PCB akan jirgi

Umarnin Amfani da samfur

Fara

Abin da kuke Bukata
Tabbatar cewa kuna da tsarin ESP8684-WROOM-06C, kayan aikin haɓaka masu mahimmanci, da allon PCB masu jituwa.

Haɗin Hardware
Haɗa ƙirar zuwa allon PCB ta bin shimfidar fil kamar yadda aka ƙayyade a cikin takaddar bayanai.

Kafa Muhallin Ci Gaba

1. Shigar da abubuwan da ake buƙata: Shigar da kayan aikin software da ɗakunan karatu da ake buƙata.
2. Samu ESP-IDF: Zazzage ESP-IDF (Espressif IoT Tsarin Haɓakawa).
3. Saita Kayan aiki: Sanya kayan aikin haɓaka don tsara shirye-shirye.
4. Saita Canjin Muhalli: Saita sauye-sauyen yanayi masu mahimmanci don yanayin ci gaba.

Ƙirƙiri Aikin Farko naku

Fara Aiki
Ƙirƙiri sabon aiki a cikin yanayin ci gaban ku.

Haɗa Na'urar ku
Ƙirƙirar haɗi tsakanin yanayin haɓaka ku da tsarin ESP8684-WROOM-06C.

Sanya
Sanya saitunan aikin da sigogi bisa ga buƙatun ku.

Gina Aikin
Haɗa aikin don samar da hoton firmware.

Filasha zuwa Na'urar
Fitar da firmware ɗin da aka haɗa akan tsarin ESP8684-WROOM-06C.

Saka idanu
Saka idanu da halayen na'urar da fitarwa don dalilai na gwaji da cirewa.

Module Overview

Siffofin

CPU da On-Chip Memory

• ESP8684H2 ko ESP8684H4 da aka saka, 32-bit RISC-V guda-core processor, har zuwa 120 MHz
• 576 KB ROM
• 272 KB SRAM (16 KB don cache)
• In-Package filasha (duba cikakkun bayanai a Table 1 ESP8684-WROOM-06C Series Comparison)
• Ana haɓaka damar zuwa walƙiya ta hanyar cache
• Yana goyan bayan Flash in-circuit Programming (ICP)

Wi-Fi

• IEEE 802.11 b/g/n-mai yarda
• Kewayon mitar ta tsakiya na tashar aiki:
  2412 ~ ​​2462 MHz
• Yana goyan bayan bandwidth 20 MHz a cikin rukunin 2.4 GHz
• Yanayin 1T1R tare da ƙimar bayanai har zuwa 72.2 Mbps
• Multimedia na Wi-Fi (WMM)
• TX/RX A-MPDU, TX/RX A-MSDU
• Nan take Block ACK
• Ragewa da defragmentation
• Damar watsawa (TXOP)
• Kulawa ta atomatik (TSF hardware)
• 3 × mahaɗar Wi-Fi mai kama-da-wane
• Goyon baya na lokaci ɗaya don kayan aikin BSS a cikin Yanayin Tasha, Yanayin SoftAP, Yanayin Tasha + SoftAP, da yanayin lalata
  Lura cewa lokacin da jerin ESP8684 ke dubawa a yanayin Tasha, tashar SoftAP za ta canza tare da tashar Tasha.

Bluetooth ®

• Bluetooth LE: Bluetooth 5.3 an tabbatar da shi
• Yanayin ƙarfin ƙarfi (20 dBm)
• Gudu: 125 kbps, 500 kbps, 1 Mbps, 2 Mbps
• Tsawaita talla
• Saitin tallace-tallace da yawa
• Algorithm zabin tashar #2
• Tsarin zaman tare na ciki tsakanin Wi-Fi da Bluetooth don raba eriya iri ɗaya

Na'urorin haɗi
GPIO, SPI, UART, I2C, LED PWM mai sarrafa, babban mai sarrafa DMA, firikwensin zafin jiki, SAR ADC, masu ƙidayar lokaci, da tsaro
Lura:
Da fatan za a koma zuwa ESP8684 Jerin Bayanai don cikakkun bayanai game da abubuwan da ke kewaye.

Abubuwan Haɗin Kan Module
26 MHz crystal oscillator

Zaɓuɓɓukan Antenna
Eriyar PCB akan jirgi

Yanayin Aiki

• Ƙa'idar aikitage/Masu wutar lantarki: 3.0 ~ 3.6V
• Yanayin yanayin aiki: -40 ~ 105 ° C

Takaddun shaida

• Takaddun shaida na Bluetooth: BQB
• Takaddun shaida na kore: RoHS/ISU

Gwaji
HTML/HTSL/uHAST/TCT/ESD/Latch-up

Bayani

• ESP8684-WROOM-06C mai ƙarfi ne, Wi-Fi gamayya da na'urar Bluetooth LE. Wannan tsarin shine kyakkyawan zaɓi don gidaje masu kaifin baki, sarrafa kansa na masana'antu, kula da lafiya, na'urorin lantarki, da sauransu.
• Ana iya hawa ESP8684-WROOM-06C akan saman allon PCB ta hanyar siyarwar sake kwarara ko kuma a sayar da ita a tsaye zuwa allon PCB ta hanyar sayar da igiyar ruwa. Lokacin da aka ɗora saman, ƙirar tana da GPIO guda 14; lokacin da aka sayar da shi a tsaye, tsarin yana da GPIO guda 5.
• ESP8684-WROOM-06C ya zo tare da eriyar PCB akan allo.
• Kwatancen jeri na ESP8684-WROOM-06C shine kamar haka:
  

  Lambar oda	In-Package filasha	Yanayin yanayi.1 (°C)	Girman (mm)
  ESP8684-WROOM-06C-H2	2 MB	-40 ~ 105	15.8 × 20.3 × 2.7
  ESP8684-WROOM-06C-H4	4 MB

  Yanayin zafin jiki yana ƙayyadad da shawarar kewayon yanayin zafi a waje da ƙirar Espressif.

• Guntuwar ESP8684H2 da guntu ESP8684H4 sun faɗi cikin rukuni iri ɗaya, wato ESP8684 guntu.
• ESP8684 jerin kwakwalwan kwamfuta yana da 32-bit RISC-V guda-core processor. Suna haɗa ɗimbin abubuwan haɗin kai, gami da UART, I2C, Mai sarrafa PWM LED, babban mai sarrafa DMA, firikwensin zafin jiki, SAR ADC, da sauransu.
  Lura:
  Don ƙarin bayani kan guntu ESP8684, da fatan za a koma zuwa ESP8684 Series Datasheet.

Ma'anar Pin

Falon Layout
Hoton fil ɗin da ke ƙasa yana nuna kusan wurin fil a kan tsarin.

Bayanin Pin

• Module ɗin yana da fil 22. Dubi ma'anar fil a cikin Tebur 2, Ma'anar Pin.
• Don saitin fil na gefe, da fatan za a koma zuwa ESP8684 Series Datasheet.
  

  Suna	A'a.	Nau'i 1	Aiki
  IO1	1	I/O/T	GPIO1, ADC1_CH1
  IO2	2	I/O/T	GPIO2, ADC1_CH2, FSPIQ
  NC	3	—	NC
  NC	4	—	NC
  IO0	5	I/O/T	GPIO0, ADC1_CH0
  RX0	6	I/O/T	GPIO19, U0RXD
  TX0	7	I/O/T	GPIO20, U0TXD
  IO3	8	I/O/T	GPIO3, ADC1_CH3, LED PWM
  IO7	9	I/O/T	GPIO7, FSPID, MTDO, LED PWM
  IO6	10	I/O/T	GPIO6, FPICLK, MTCK, LED PWM
  IO4	11	I/O/T	GPIO4, ADC1_CH4, FSPIHD, MTMS, LED PWM
  IO5	12	I/O/T	GPIO5, FSPIWP, MTDI, LED PWM
  GND	13	P	Kasa
  3V3	14	P	Tushen wutan lantarki
  IO18	15	I/O/T	Farashin GPIO18
  IO10	16	I/O/T	GPIO10, FPICS0
  NC	17	—	NC
  EN	18	I	High: Daya kunna guntu. Ƙananan: a kashe, guntu yana kashe wuta. Default: na ciki an ja sama.
  NC	19	—	NC
  Farashin IO9	20	I/O/T	Farashin GPIO9
  IO8	21	I/O/T	Farashin GPIO8
  EPAD	22	P	Kasa

  1. P: wutar lantarki; I: shigar; O: fitarwa; T: high impedance.
  2. Ana iya amfani da wannan fil azaman wurin gwaji.
     Lura:
     IO0, IO1, IO3, da IO5/MTDI fil suna da ƙananan glitches yayin ƙarfin guntu. Dubi cikakkun bayanai a cikin sashin Gabaɗaya Maƙasudin Shigar / Fuskar Fitarwa (GPIO) na ESP8684 Series Datasheet.

Fara

Abin da kuke Bukata
Don haɓaka aikace-aikace don tsarin, kuna buƙatar:

• 1 x ESP8684-WROOM-06C
• 1 x Espressif RF kwamitin gwaji
• 1 x USB-to-Serial allon
• 1 x Kebul na Micro-USB
• 1 x PC mai sarrafa Linux
  A cikin wannan jagorar mai amfani, muna ɗaukar tsarin aiki na Linux azaman example. Don ƙarin bayani game da daidaitawa akan Windows da macOS, da fatan za a koma zuwa Jagorar Shirye-shiryen ESP-IDF.

Haɗin Hardware

1. Sayar da tsarin ESP8684-WROOM-06C zuwa allon gwajin RF kamar yadda aka nuna a hoto 2.

   

2. Haɗa allon gwajin RF zuwa allon USB-zuwa-Serial ta TXD, RXD, da GND.
3. Haɗa allon USB-zuwa-Serial zuwa PC.
4. Haɗa allon gwajin RF zuwa PC ko adaftar wuta don ba da damar samar da wutar lantarki 5 V ta kebul na Micro-USB.
5. Yayin zazzagewa, haɗa IO0 zuwa GND ta hanyar tsalle. Sannan, kunna “ON” allon gwaji.
6. Zazzage firmware cikin filasha. Don cikakkun bayanai, duba sassan da ke ƙasa.
7. Bayan zazzagewa, cire jumper akan IO0 da GND.
8. Ƙaddamar da allon gwajin RF kuma. Module ɗin zai canza zuwa yanayin aiki. Guntu zai karanta shirye-shirye daga walƙiya lokacin farawa.
   Lura:
   IO0 yana da ma'ana cikin ciki high. Idan an saita IO0 don cirewa, an zaɓi yanayin Boot. Idan wannan fil ɗin ya ja ƙasa ko hagu yana iyo, an zaɓi yanayin saukewa. Don ƙarin bayani akan ESP8684-WROOM-06C, da fatan za a koma zuwa ga ESP8684 Series Datasheet.

Kafa Muhallin Ci Gaba

Tsarin Ci gaban Espressif IoT (ESP-IDF a takaice) tsari ne don haɓaka aikace-aikace dangane da Espressif ESP32. Masu amfani za su iya haɓaka aikace-aikace tare da ESP8684 a cikin Windows/Linux/macOS dangane da ESP-IDF. Anan mun dauki tsarin aiki na Linux a matsayin example.

Shigar da Sakamako
Don haɗa tare da ESP-IDF, kuna buƙatar samun fakiti masu zuwa:

• CentOS 7 & 8:
  
• Ubuntu da Debian:
  
• Arch:
  
  Lura:
  • Wannan jagorar tana amfani da directory ~/esp akan Linux azaman babban fayil ɗin shigarwa don ESP-IDF.
  • Ka tuna cewa ESP-IDF baya goyan bayan sarari a cikin hanyoyi.

Samu ESP-IDF

• Don gina aikace-aikace na ESP8684-WROOM-06C, kuna buƙatar ɗakunan karatu na software da Espressif ya bayar a cikin ma'ajin ESP-IDF.
• Don samun ESP-IDF, ƙirƙiri jagorar shigarwa (~/esp) don zazzage ESP-IDF zuwa kuma rufe ma'ajiyar tare da 'git clone':

  

• Za a zazzage ESP-IDF zuwa ~/esp/esp-idf. Tuntuɓi Siffofin ESP-IDF don bayani game da wane nau'in ESP-IDF don amfani da shi a cikin yanayin da aka bayar.

Saita Kayan aiki
Baya ga ESP-IDF, kuna buƙatar shigar da kayan aikin da ESP-IDF ke amfani da su, kamar masu tarawa, debugger, fakitin Python, da sauransu. ESP-IDF tana ba da rubutun mai suna 'install.sh' don taimakawa saita kayan aikin. a tafi daya.

Saita Canjin Muhalli
Har yanzu ba a ƙara kayan aikin da aka shigar zuwa canjin yanayin PATH ba. Don yin amfani da kayan aikin daga layin umarni, dole ne a saita wasu masu canjin yanayi. ESP-IDF yana ba da wani rubutun,'export.sh', wanda ke yin hakan. A cikin tashar da za ku yi amfani da ESP-IDF, gudu:

Yanzu komai yana shirye, zaku iya gina aikinku na farko akan tsarin ESP8684-WROOM-06C.

Ƙirƙiri Aikin Farko naku

Fara Aiki

• Yanzu kun shirya don shirya aikace-aikacenku don ƙirar ESP8684-WROOM-06C. Kuna iya farawa da farawa/hello_world aikin daga tsohonamples directory a cikin ESP-IDF.
• Kwafi fara farawa/hello_world zuwa ~/esp directory:

  
• Akwai kewayon example ayyukan a cikin exampLes directory a cikin ESP-IDF. Kuna iya kwafi kowane aiki kamar yadda aka gabatar a sama kuma ku gudanar da shi. Hakanan yana yiwuwa a gina examples a wurin, ba tare da kwafi su farko ba.

Haɗa Na'urar ku
Yanzu haɗa na'urar ku zuwa kwamfutar kuma duba ƙarƙashin ko wane tashar tashar jiragen ruwa ake iya gani. Serial ports a Linux suna farawa da '/ dev/tty' a cikin sunayensu. Gudun umarni a ƙasa sau biyu, na farko tare da cire allon, sannan tare da shi a ciki. Tashar da ta bayyana a karo na biyu ita ce wacce kuke buƙata:

Lura:
Rike sunan tashar jiragen ruwa da amfani kamar yadda zaku buƙaci shi a matakai na gaba.

Sanya

• Kewaya zuwa kundin adireshin ku na 'hello_world' daga Mataki 3.4.1. Fara aikin, saita guntu ESP8684 azaman maƙasudi, kuma gudanar da tsarin tsarin aikin 'menuconfig'.

  

• Saita manufa tare da 'idf.py set- target ESP8684' yakamata a yi sau ɗaya, bayan buɗe sabon aiki. Idan aikin ya ƙunshi wasu gine-ginen da aka gina da kuma daidaitawa, za a share su kuma a fara farawa. Za'a iya ajiye maƙasudin a cikin canjin yanayi don tsallake wannan matakin duka. Duba Zaɓin Makasudin don ƙarin bayani.
• Idan matakan da suka gabata an yi su daidai, menu mai zuwa yana bayyana:

  

• Kuna amfani da wannan menu don saita takamaiman masu canji na aikin, misali, Wi-Fi sunan cibiyar sadarwa da kalmar wucewa, saurin sarrafawa, da sauransu. Ana iya tsallake saita aikin tare da menuconfig don “hello_world”. Wannan example zai gudu tare da tsoho sanyi.
• Launuka na menu na iya bambanta a tashar ku. Kuna iya canza kamanni tare da zaɓi '-̉-style'̉. Da fatan za a gudanar da 'idf.py menuconfig -̉-help'̉ don ƙarin bayani.

Gina Aikin

• Gina aikin ta gudana:

  
• Wannan umarnin zai tattara aikace-aikacen da duk abubuwan ESP-IDF, sannan zai samar da bootloader, tebur na bangare, da binaries na aikace-aikacen.

  

• Idan babu kurakurai, ginin zai ƙare ta hanyar samar da firmware binary .bin file.

Filasha zuwa Na'urar

• Finata binary ɗin da kuka gina a kan tsarin ku ta hanyar gudu:

  
• Maye gurbin PORT da sunan tashar tashar jiragen ruwa na hukumar ESP8684 daga Mataki: Haɗa na'urar ku.
• Hakanan zaka iya canza ƙimar baud flash ta maye gurbin BAUD tare da ƙimar baud ɗin da kuke buƙata. Adadin baud ɗin tsoho shine 460800.
• Don ƙarin bayani kan muhawara idf.py, duba idf.py.
  Lura:
  Zaɓin 'flash' yana ginawa da walƙiya aikin ta atomatik, don haka gudanar da'idf.py gini' ba lallai bane.
• Lokacin da walƙiya, za ku ga log ɗin fitarwa kamar haka:

  

• Idan babu matsala a ƙarshen aikin walƙiya, hukumar za ta sake yin aiki kuma ta fara aikace-aikacen "hello_world".

Saka idanu

• Don bincika idan da gaske "hello_world" yana gudana, rubuta 'idf.py -p PORT Monitor' (Kada ku manta da maye gurbin PORT da sunan tashar tashar ku).
• Wannan umarni yana ƙaddamar da aikace-aikacen IDF Monitor:

  

• Bayan farawa da rajistan ayyukan bincike gungura sama, yakamata ku ga "Hello duniya!" bugu daga aikace-aikacen.

  
• Don fita IDF duba, yi amfani da gajeriyar hanya Ctrl+].
• Wannan shine abin da kuke buƙata don farawa tare da tsarin ESP8684-WROOM-06C! Yanzu kun shirya don gwada wasu tsohonampa cikin ESP-IDF, ko tafi daidai don haɓaka aikace-aikacenku.

US FCC Bayanin

Na'urar ta dace da KDB 996369 D03 OEM Manual v01. Da ke ƙasa akwai umarnin haɗin kai don masana'antun samfuran masauki bisa ga KDB 996369 D03 OEM Manual v01.

Jerin Dokokin FCC masu aiki
FCC Kashi na 15 Karamin C 15.247

Musamman Sharuɗɗan Amfani
Tsarin yana da WiFi da ayyukan BLE.

• Mitar Aiki:
  • WiFi: 2412 ~ ​​2462 MHz
  • Bluetooth: 2402 ~ ​​2480 MHz
• Adadin Channel:
  • WiFi: 11
  • Bluetooth: 40
• Modulation:
  • WiFi: DSS; OFDM
  • Bluetooth: GFSK;
• Nau'in: Antenna PCB a kan jirgi
• Riba: 2.7 dBi Max
  Ana iya amfani da ƙirar don aikace-aikacen IoT tare da matsakaicin eriya 2.7 dBi. Mai ƙera masaukin da ke shigar da wannan samfuri a cikin samfuran su dole ne su tabbatar da cewa samfurin haɗe-haɗe na ƙarshe ya dace da buƙatun FCC ta hanyar kimanta fasaha ko kimanta dokokin FCC, gami da aikin watsawa. Mai sana'anta ya kamata ya sani kar ya ba da bayani ga mai amfani na ƙarshe game da yadda ake girka ko cire wannan RF a cikin littafin jagorar ƙarshen samfurin mai amfani wanda ya haɗa wannan tsarin. Littafin jagorar mai amfani na ƙarshe zai haɗa da duk bayanan tsari/gargaɗi da ake buƙata kamar yadda aka nuna a cikin wannan jagorar.

Tsare-tsaren Module masu iyaka
Ba a zartar ba. Samfurin module ɗin guda ɗaya ne kuma ya dace da buƙatun FCC Sashe na 15.212.

Zane-zanen Eriya
Ba a zartar ba. Module ɗin yana da eriyar sa, kuma baya buƙatar bugu na runduna microstrip trace eriya, da sauransu.

La'akari da Bayyanar RF
Dole ne a shigar da tsarin a cikin kayan aikin mai watsa shiri kamar yadda aƙalla 20cm ana kiyaye shi tsakanin eriya da jikin masu amfani; kuma idan an canza bayanin bayyanar RF ko shimfidar sashe, to ana buƙatar mai sana'anta samfurin ya ɗauki alhakin tsarin ta canji a FCC ID ko sabon aikace-aikace. Ba za a iya amfani da ID na FCC na ƙirar akan samfurin ƙarshe ba. A cikin waɗannan yanayi, masana'anta za su ɗauki alhakin sake kimanta ƙarshen samfurin (ciki har da mai watsawa) da samun izinin FCC daban.

Antenna

• Bayanin Antenna sune kamar haka:
  • Nau'in: PCB Antenna
  • Riba: 2.7 dBi
• Anyi nufin wannan na'urar don masana'antun baƙi kawai a ƙarƙashin yanayi masu zuwa:
  • Ƙila ba za a haɗa tsarin mai watsawa tare da kowane mai watsawa ko eriya ba.
  • Za a yi amfani da tsarin tare da eriya (s) na waje waɗanda aka gwada da asali tare da wannan ƙirar.
  • Dole ne eriyar ta kasance ko dai ta kasance a haɗe ta har abada ko kuma a yi amfani da na'ura mai haɗawa da eriya 'na musamman'.
• Muddin sharuɗɗan da ke sama sun cika, ba za a buƙaci ƙarin gwajin watsawa ba. Koyaya, masana'anta har yanzu suna da alhakin gwada samfuran ƙarshen su don kowane ƙarin buƙatun yarda da ake buƙata tare da shigar da wannan ƙirar (don tsohonample, watsawar na'urar dijital, buƙatun PC na gefe, da sauransu).

Lakabi da Bayanin Biyayya
Masu sana'anta samfurin mai watsa shiri suna buƙatar samar da alamar ta zahiri ko e-lamba mai faɗi "Ya ƙunshi ID na FCC: 2AC7Z-ESP868406C" tare da ƙãre samfurinsu.

Bayani kan hanyoyin gwaji da ƙarin buƙatun gwaji

• Mitar Aiki:
  • WiFi: 2412 ~ ​​2462 MHz
  • Bluetooth: 2402 ~ ​​2480 MHz
• Adadin Channel:
  • WiFi: 11
  • Bluetooth: 40
• Modulation:
  • WiFi: DSS; OFDM
  • Bluetooth: GFSK;
    Dole ne masana'antun masu watsa shirye-shirye su yi gwaje-gwajen watsawa da gudanar da hayaki da hayaƙi, da dai sauransu, bisa ga ainihin hanyoyin gwaji don mai watsawa na yau da kullun a cikin runduna, da kuma na'urorin watsawa da yawa a lokaci guda ko wasu masu watsawa a cikin samfurin rundunar. Sai kawai lokacin da duk sakamakon gwajin yanayin gwaji ya bi ka'idodin FCC, to za a siyar da samfurin ƙarshe bisa doka.

Ƙarin gwaji, Sashe na 15 Ƙarfafan Sashe na B

• Mai watsawa na yau da kullun FCC ce kawai aka ba da izini don FCC Sashe na 15 Sashe na C 15.247, kuma masana'anta samfurin yana da alhakin bin duk wasu ƙa'idodin FCC waɗanda suka shafi mai watsa shiri wanda ba a rufe shi ta hanyar bayar da takaddun shaida na zamani. Idan mai bayarwa ya tallata samfuran su azaman Sashe na 15 Subpart B mai yarda (lokacin kuma ya ƙunshi da'irar dijital-radiator ba da gangan ba), to mai bayarwa zai ba da sanarwar da ke nuna cewa samfurin ƙarshe na ƙarshe yana buƙatar gwajin yarda da Sashe na 15 Subpart B tare da na'urar watsawa ta zamani da aka shigar.
• An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class B, ƙarƙashin Sashe na 15 na Dokokin FCC. An ƙirƙira waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifarwa, amfani, kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma aka yi amfani da shi bisa ga umarnin, na iya haifar da tsangwama mai cutarwa ga sadarwar rediyo.
• Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aiki ya haifar da tsangwama mai cutarwa ga rediyo ko liyafar talabijin, wanda za'a iya tantance shi ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara kutse ta ɗayan matakan masu zuwa:
  • Sake daidaitawa ko matsar da eriya mai karɓa.
  • Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
  • Haɗa kayan aiki zuwa wani kanti a kan kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
  • Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.
• Wannan na'urar ta bi Sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
  • Wannan na'urar bazai haifar da tsangwama mai cutarwa ba.
  • Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.
    Tsanaki:
    Duk wani canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.
• Wannan kayan aikin ya cika FCC RF iyakokin fiddawa da aka tsara don yanayin da ba a sarrafa shi. Wannan na'urar da eriya ba dole ne su kasance tare ko aiki tare da kowane eriya ko mai watsawa ba. Dole ne a shigar da eriya da ake amfani da su don wannan mai watsawa don samar da nisa na aƙalla 20 cm daga duk mutane kuma dole ne a kasance tare da su ko aiki tare da kowane eriya ko mai watsawa.

Umarnin Haɗin Kan OEM
Anyi nufin wannan na'urar don masu haɗin OEM kawai a ƙarƙashin yanayi masu zuwa:

• Ƙila ba za a haɗa tsarin mai watsawa tare da kowane mai watsawa ko eriya ba.
• Za'a yi amfani da tsarin ne kawai tare da eriya wacce aka gwada ta asali kuma ta tabbatar da wannan tsarin.
• Muddin sharuɗɗan da ke sama sun cika, ba za a buƙaci ƙarin gwajin watsawa ba. Koyaya, mai haɗin OEM har yanzu yana da alhakin gwada samfuran ƙarshen su don kowane ƙarin buƙatun yarda da ake buƙata tare da shigar da wannan ƙirar (don tsohonample, watsawar na'urar dijital, buƙatun PC na gefe, da sauransu).

Ingancin Amfani da Takaddun shaida na Module
Idan waɗannan sharuɗɗan ba za a iya cika su ba (misaliample, wasu saitunan kwamfutar tafi-da-gidanka ko wurin haɗin gwiwa tare da wani mai watsawa), to, izinin FCC na wannan ƙirar a hade tare da kayan aikin rundunar ba a ɗaukan inganci, kuma FCC ID na module ɗin ba za a iya amfani da shi akan samfurin ƙarshe ba. A cikin waɗannan yanayi, mai haɗin OEM zai kasance alhakin sake kimanta samfurin ƙarshe (ciki har da mai watsawa) da samun izini na FCC daban.

Ƙarshen Lakabin Samfura
Dole ne a yi wa samfurin ƙarshen alamar alama a wuri mai zuwa tare da mai zuwa: "Ya ƙunshi Mai watsawa Module FCC ID: 2AC7Z-ESP868406C".

Takaddun da ke da alaƙa da Takardun Abubuwan da ke da alaƙa

• Takardar bayanan ESP8684 - Bayanan Bayani na kayan aikin ESP8684.
• ESP8684 Bayanan Bayani na Fasaha - Cikakken bayani kan yadda ake amfani da ƙwaƙwalwar ESP8684 da abubuwan haɗin gwiwa.
• ESP8684 Jagorar Zane Hardware - Sharuɗɗa kan yadda ake haɗa ESP8684 cikin samfuran kayan aikin ku.
• Takaddun shaida https://espressif.com/en/support/documents/certificates
• ESP8684 Samfuri/ Fadakarwa Canjin Tsarin (PCN) https://espressif.com/en/support/documents/pcns?keys=ESP8684
• Sabunta Takardu da Sabunta Kuɗin Sanarwa https://espressif.com/en/support/download/documents

Yankin Mai Haɓakawa

• Jagorar Shirye-shiryen ESP-IDF don ESP8684 - Takaddun da yawa don tsarin ci gaban ESP-IDF.
• ESP-IDF da sauran tsarin ci gaba akan GitHub.
  https://github.com/espressif
• Dandalin ESP32 BBS - Injiniya-zuwa Injiniya (E2E) Community don samfuran Espressif, inda zaku iya aika tambayoyi,
  raba ilimi, bincika ra'ayoyi, da kuma taimakawa warware matsaloli tare da injiniyoyin abokan aiki.
  https://esp32.com/
• Jaridar ESP - Mafi kyawun Ayyuka, Labarai, da Bayanan kula daga mutanen Espressif.
  https://blog.espressif.com/
• Duba shafukan SDKs, Demos, Apps, Tools, da AT Firmware.
  https://espressif.com/en/support/download/sdks-demos

Kayayyaki

• Saukewa: ESP8684 - Binciko ta duk ESP8684 SoCs. https://espressif.com/en/products/socs?id=ESP8684
• ESP8684 Jerin Modules - Bincika ta cikin dukkan tushen ESP8684. https://espressif.com/en/products/modules?id=ESP8684
• ESP8684 Series DevKits - Bincika ta duk abubuwan da ke tushen ESP8684. https://espressif.com/en/products/devkits?id=ESP8684
• ESP Product Selecter - Nemo samfurin kayan masarufi na Espressif wanda ya dace da buƙatun ku ta hanyar kwatanta ko amfani da tacewa. https://products.espressif.com/#/product-selector?language=en

Tuntube Mu
Dubi shafuka Tambayoyin Talla, Tambayoyin Fasaha, Tsarin Da'ira & Tsarin PCB Review, samu Samples (Kantinan Kan layi), Kasance Mai Bayar Mu, Sharhi & Shawarwari. https://espressif.com/en/contact-us/sales-questions

Sanarwa da Haƙƙin mallaka

• Bayani a cikin wannan takarda, gami da URL nassoshi, ana iya canzawa ba tare da sanarwa ba.
• DUK BAYANIN JAM'IYYA NA UKU A CIKIN WANNAN TAKARDUN ANA BADA KAMAR YADDA BABU WARRANTI GA GASKIYA DA INGANTACCEN SA.
• BABU WARRANTI DA AKA BAYAR DA WANNAN TAKARDUN DON SAMUN SAMUN SA, RASHIN HANKALI, KWANTA GA KOWANE MUSAMMAN MANUFA, KUMA BABU WANI WARRANTI SAURAN DA YA TASHE GA WATA SHARI'A, BAYANI, KO SHARRI.AMPLE.
• Duk wani abin alhaki, gami da abin alhaki na keta duk wani haƙƙoƙin mallaka, wanda ya shafi amfani da bayanai a cikin wannan takaddar ba a musanta ba. Babu wani lasisi da aka bayyana ko bayyana, ta estoppel ko akasin haka, ga kowane haƙƙin mallakar fasaha da aka bayar anan.
• Alamar Memba ta Wi-Fi Alliance alamar kasuwanci ce ta Wi-Fi Alliance. Tambarin Bluetooth alamar kasuwanci ce mai rijista ta Bluetooth SIG.
• Duk sunayen kasuwanci, alamun kasuwanci, da alamun kasuwanci masu rijista da aka ambata a cikin wannan takaddar mallakin masu su ne kuma an yarda dasu.

Tambayoyin da ake yawan yi (FAQ)

• Zan iya amfani da duka Wi-Fi da ayyukan Bluetooth a lokaci guda akan ESP8684-WROOM-06C?
  Ee, tsarin yana goyan bayan ayyukan Wi-Fi da Bluetooth a lokaci guda, yana ba da damar aikace-aikace daban-daban waɗanda ke buƙatar iyawar mara waya biyu.
• Menene shawarar yanayin zafin yanayi don aiki da ESP8684-WROOM-06C?
  An ƙayyade kewayon yanayin yanayin yanayi da aka ba da shawarar don ƙirar a cikin takaddun bayanai kuma ya kamata a kiyaye shi don ingantaccen aiki da tsawon rai.

Takardu / Albarkatu

ESPRESSIF SYSTEMS ESP8684-WROOM-060 ESP32 C2 Module [pdf] Manual mai amfani 2AC7Z-ESP868406C, 2AC7ZESP868406C, esp868406c, ESP8684-WROOM-060 ESP32 C2 Module, ESP8684-WROOM-060, ESP32 C2 Module, C2 Module

Magana

• Manual mai amfani