ESP32-C6-WROOM-1U
Manual mai amfani
ESP32-C6-WROOM-1U Bluetooth WiFi Module 2.4 GHz
Module wanda ke goyan bayan 2.4 GHz Wi-Fi 6, Bluetooth® 5 (LE), Zigbee da Thread (802.15.4)
Gina a kusa da jerin ESP32-C6 na SoCs, 32-bit RISC-V guda-core microprocessor
Flash har zuwa 16 MB
23 GPIOs, wadataccen saiti na gefe
Mai haɗa eriyar waje
ESP32-C6-WROOM-1U
Pre-saki v1.0
Abubuwan da aka bayar na Espressif Systems
Haƙƙin mallaka © 2024
Module Overview
1.1 Fasali
CPU da On-Chip Memory
- ESP382-C6 da aka saka, 32-bit RISC-V microprocessor guda-core, har zuwa 160 MHz
- Saukewa: 320KB
- HP SRAM: 512 KB
- LP SRAM: 16 KB
Wi-Fi
- 171R a cikin 2.4 GHz band
- Mitar aiki: 2412 ~ 2462 MHz
- JEEE 802.1ax-mai yarda
- Yanayin 20 MHz-kawai wanda ba na AP ba
MCSO ~ MCS9 - Uplink da downlink OFDMA, musamman dacewa da haɗin kai lokaci guda a cikin manyan mahalli masu yawa
- Downlink MU-MIMO (mai amfani da yawa, shigar da yawa, mMultiole fitarwa) don ƙara ƙarfin cibiyar sadarwa
- Beamformee wanda ke haɓaka ingancin sigina - Alamar ingancin tashar (CQI) - DCM (daidaitaccen mai ɗaukar kaya biyu) don haɓaka ƙarfin haɗin gwiwa - Sake amfani da sararin samaniya don haɓaka watsa shirye-shirye iri ɗaya.
- Lokacin farkawa (TWT) wanda ke haɓaka hanyoyin ceton wutar lantarki
- Cikakken jituwa tare da IEEE 802.11b/g/n yarjejeniya - 20 MHz da 40 MHz bandwidth
- Adadin bayanai har zuwa 150 Mbps
- Wi-Fi Multimedia (WMM)
- TX/RX A-MPDU, TX/RX A-MSDU
– Nan take Block ACK
- Ragewa da ɓarna - damar watsawa (TXOP)
- Kulawa ta atomatik (TSF hardware)
-4x Virtual Wi-Fi interfacesb
* - Tallafi na lokaci guda don Infrastructure BSS a cikin Yanayin Tasha, Yanayin SoftAP, Yanayin Tasha + SoftAP, da yanayin lalata Ka lura cewa lokacin da ESP32-C6 yayi bincike a cikin yanayin tashar, tashar SoftAP zata canza tsayi tare da tashar tashar. - - 802.11mc FIM
Bluetooth ®
- Bluetooth LE: Bluetooth 5.3 bokan
- ragamar Bluetooth
- Yanayin ƙarfin ƙarfi
- Gudun gudu: 125 kbps, 500 kbps 1 Mbps, 2 Mbps
- Tsawaita talla
- Saitin tallace-tallace da yawa
- Algorithm zabin tashar #2
- LE iko iko
- Tsarin zaman tare na ciki tsakanin Wi-Fi da Bluetooth don raba eriya iri ɗaya
IEEE 802.15.4
- Yarda da IEEE 802.15.4-2015 yarjejeniya
- OQPSK PHY a cikin band na 2.4 GHz
- Adadin bayanai: 250 Kbps
- Zare 1.3
- Zigbee 3.0
Na'urorin haɗi
- GPIO, SPI, layi daya 1O dubawa, UART, l2C, I2S, RMT (TX/RX), bugun jini counter, LED PWM, USB Serial/JTAG mai sarrafawa, MCPWM, SDIO2.0 mai kula da bawa, GDMA, TWAI® mai sarrafawa, aikin gyara guntu akan guntu ta hanyar JTAG, matrix ɗawainiyar taron, ADC, firikwensin zafin jiki, masu ƙidayar manufa ta gaba ɗaya, masu sa ido, da sauransu.
Abubuwan Haɗin Kan Module
- 40 MHz crystal oscillator
- SPI flash
Zaɓuɓɓukan Antenna
- Eriya ta waje ta hanyar haɗi
Yanayin Aiki
- Ƙa'idar aikitage/Kayan wuta: 3.0 ~ 3.6 V
- Yanayin yanayin aiki:
- 85 °C nau'in nau'in: -40 ~ 85 °C
- 105 °C nau'in nau'in: -40 ~ 105 °C
1.2 Bayani
ESP32-C6-WROOM-1U babban manufa Wi-Fi ne, IEEE 802.15.4, da Bluetooth LE module. Ƙididdiga mai ƙarfi na kayan aiki da babban aiki suna sa ƙirar ta zama kyakkyawan zaɓi don gidaje masu kaifin baki, sarrafa kansa na masana'antu, kula da lafiya, kayan lantarki na mabukaci, da sauransu.
ESP32-C6-WROOM-1U module yana da filasha na SPI na waje.
Bayanin oda don ESP382-C6-WROOM-1U shine kamar haka:
Table 1: ESP32-C6-WROOM-1U Jerin Kwatancen
| Lambar oda | Filashi | Yanayin yanayi (°C) | Girman (mm) |
| ESP32-C6-WROOM-1U-N4 | 4MB (Quad SPI) | 40 ~ 85 | 18.0 x 19.2 x 3.1 |
| ESP32-C6-VVROOM-1U-N8 | 8MB (Quad SPI) |
A jigon wannan tsarin shine ESP32-C6, mai sarrafa guda 32-bit RISC-V.
ESP32-C6 yana haɗa ɗimbin yawa na abubuwan haɗin gwiwa ciki har da SPI, daidaitaccen IO interface, UART, I2C, 12S, RMT (TX/RX), LED PWM, USB Serial / JTAG mai sarrafawa, MCPWM, SDIO2.0 mai kula da bawa, GDMA, TWAI® mai sarrafawa, aikin gyara guntu akan guntu ta hanyar JTAG, taron aiki matrix, kazalika har zuwa 23 GPIOs, da dai sauransu.
Lura:
* Don ƙarin bayani akan ESP32-C6, da fatan za a koma zuwa ESP32-C6 Series Datasheet.
Ma'anar Pin
2.1 Fil Layout
Hoton fil ɗin da ke ƙasa yana nuna kusan wurin fil a kan tsarin, amma ESP32-C6-WROOM-1U ba shi da yankin kiyayewa.
Hoto 1: Fin Layout (Top View)
2.2 Bayanin Pin
Module ɗin yana da fil 29. Dubi ma'anar fil a cikin Tebur 2 Ma'anar ma'anar fil.
Don saitin fil na gefe, da fatan za a koma zuwa ESP32-C6 Series Datasheet.
Tebur 2: Ma'anar Ma'anar Pin
| Suna | A'a. | Nau'in¹ | Aiki |
| GND | 1 | P | Kasa |
| 3V3 | 2 | P | Tushen wutan lantarki |
| EN | 3 | I | High: a kunne, yana ba da damar guntu. Ƙananan: a kashe, guntu yana kashe wuta. Lura: Kar a bar fil ɗin EN yana yawo. |
| 104 | 4 | I/0/T | MIMS. GPI04, LP GPI04, LP UART RXD, ADC1_CH4, FSPIHD |
| 105 | 5 | I/0/T | MTDI. GP105. LP GPI05, LP UART TXD. ADC1_CH5, FSPIWP |
| 106 | 6 | I/0/T | MTCK. GP106. LP GPI06. LP 12C_SDA, ADC1_CH6, FPICLK |
| 107 | 7 | 1/0/7 | MTDO, GPI07, LP GPIOZ LP I2C_SCL, FSPID |
| 100 | 8 | I/0/T | GPI00, XTAL_32K_P, LP GPI00, LP UART DTRN, ADC1_CHO |
| 101 | 9 | I/0/T | GPI01, XTAL_32K_N, LP GP101, LP UART DSRN, ADC1_CH1 |
| 108 | 10 | I/0/T | Saukewa: GP108 |
| 1010 | 11 | I/0/T | GPI010 |
| 1011 | 12 | I/0/T | GPI011 |
| 1012 | 13 | I/0/T | GPI012. USB_D- |
| 1013 | 14 | I/0/T | GPI013. USB_D+ |
| 109 | 15 | I/0/T | Saukewa: GP109 |
| 1018 | 16 | I/0/T | GPI018, SD1O_CMD, FPICS2 |
| 1019 | 17 | I/0/T | GP1019, SDIO_CLK, FPICS3 |
| 1020 | 18 | I/0/T | GPIO20, SDIO_DATAO, FPICS4 |
| 1021 | 19 | I/0/T | GPIO21, SDIO_DATA1, FPICS5 |
| 1022 | 20 | I/0/T | GPIO22, SDIO_DATA2 |
| 1023 | 21 | I/0/T | GPIO23, SDIO_DATA3 |
| NC | 22 | - | NC |
| 1015 | 23 | I/0/T | GPI015 |
| RXDO | 24 | I/0/T | UORXD. GP1017, FPICS1 |
| TXDO | 25 | I/0/T | UOTXD, GPI016. FSPICSO |
| 103 | 26 | 1/0/7 | GPI03, LP GPI03, LP UART CTSN. ADC1_CH3 |
| 102 | 27 | 1/0/7 | GPIO2, LP GPIO2, LP UART RTSN, ADC1_CH2, FSPIO |
| GND | 28 | P | Kasa |
| EPAD | 29 | P | Kasa |
¹ P: wutar lantarki; I: shigar; O: fitarwa; T: high impedance.
Fara
3.1 Abin da kuke Bukata
Don haɓaka aikace-aikace don module kuna buƙatar:
- 1x ESP32-C6-WROOM-1U
- 1 x Espressif RF kwamitin gwaji
- 1X USB-to-Serial allon
- 1x Kebul na Micro-USB
- 1 x PC yana aiki da Linux
A cikin wannan jagorar mai amfani, muna ɗaukar tsarin aiki na Linux azaman example. Don ƙarin bayani game da daidaitawa akan Windows da macOS, da fatan za a koma zuwa Jagorar Shirye-shiryen ESP-IDF.
3.2 Haɗin Hardware
- Sayar da tsarin ESP32-C6-WROOM-1U zuwa allon gwajin RF kamar yadda aka nuna a hoto 2.
Hoto 2: Haɗin Hardware
- Haɗa allon gwajin RF zuwa allon USB-zuwa-Serial ta TXD, RXD, da GND.
- Haɗa allon USB-zuwa-Serial zuwa PC.
- Haɗa allon gwajin RF zuwa PC ko adaftar wuta don ba da damar samar da wutar lantarki 5 V, ta kebul na Micro-USB.
- Yayin zazzagewa, haɗa lO9 zuwa GND ta hanyar tsalle. Sannan, kunna “ON” allon gwaji.
- Zazzage firmware cikin filasha. Don cikakkun bayanai, duba sassan da ke ƙasa.
- Bayan zazzagewa, cire jumper akan | O9 da GND.
- Ƙaddamar da allon gwajin RF kuma. Module ɗin zai canza zuwa yanayin aiki. Guntu zai karanta shirye-shirye daga walƙiya lokacin farawa.
Lura:
IO9 yana da ma'ana cikin ciki high. Idan an saita lO9 zuwa sama, an zaɓi yanayin Boot. Idan wannan fil ɗin yana jan ƙasa ko hagu yana iyo, an zaɓi yanayin zazzagewa. Don ƙarin bayani akan ESP32-C6-WROOM-1U, da fatan za a koma zuwa ESP32-C6 Series Datasheet.
3.3 Kafa Muhallin Ci Gaba
Tsarin ci gaba na Espressif loT (ESP-IDF a takaice) tsari ne don haɓaka aikace-aikace dangane da Espressif ESP32. Masu amfani za su iya haɓaka aikace-aikace tare da ESP32-C6 a cikin Windows/Linux/macOS dangane da ESP-IDF. Anan muna ɗaukar tsarin aiki na Linux azaman example.
3.3.1 Shigar da Abubuwan da ake bukata
Don haɗa tare da ESP-IDF kuna buƙatar samun fakiti masu zuwa:
- CentOS 7 & 8:
sudo yum -y update && sudo yum shigar git wget flex bison gperf pythons cmake ninja-build ccache dfu-util libusbx - Ubuntu da Debian:
sudo dace-samun shigar git wget flex bison gperf python python3-venv cmake ninja-build ccache libffi-dev libssl-dev dfu-util libusb-1.0-9 - Arch:
sudo pacman -S - buƙatar gcc git sa flex bison gperf python cmake ninja ccache dfu-util libusb
Lura:
- Wannan jagorar tana amfani da directory ~/esp akan Linux azaman babban fayil ɗin shigarwa don ESP-IDF.
- Ka tuna cewa ESP-IDF baya goyan bayan sarari a cikin hanyoyi.
3.3.2 Sami ESP-IDF
Don gina aikace-aikacen ESP382-C6-WROOM-1U, kuna buƙatar ɗakunan karatu na software wanda Espressif ya bayar a ma'ajiyar ESP-IDF.
Don samun ESP-IDF, ƙirƙiri jagorar shigarwa (~/esp) don zazzage ESP-IDF zuwa kuma rufe ma'ajiyar tare da 'git clone':
¹ mkdir -p ~/esp
² Cd ~/ esp
³ Qit clone – mai maimaitawa https://github.com/espressif/esp-idf.git
Za a sauke ESP-IDF zuwa ~/esp/esp-idf. Tuntuɓi Siffofin ESP-IDF don bayani game da wane nau'in ESP-IDF don amfani da shi A cikin yanayin da aka bayar.
3.3.3 Kayayyakin Saita
Baya ga ESP-IDF, kuna buƙatar shigar da kayan aikin da ESP-IDF ke amfani da su, kamar masu tarawa, debugger, fakitin Python, da sauransu. ESP-IDF tana ba da rubutun mai suna 'install.sh' don taimakawa saita kayan aikin. a tafi daya.
¹cd ~/esp/esp-idf
²◾/saka◾sh esp32c6
3.3.4 Saita Canjin Muhalli
Har yanzu ba a ƙara kayan aikin da aka shigar zuwa canjin yanayin PATH ba. Don yin amfani da kayan aikin daga layin umarni, dole ne a saita wasu masu canjin yanayi. ESP-IDF yana ba da wani rubutun 'export.sh' wanda ke yin hakan. A cikin tashar da za ku yi amfani da ESP-IDF, gudu:
◾$HOME/esp/esp-idf/export.sh
Yanzu komai yana shirye, zaku iya gina aikinku na farko akan ESP382-C6-WROOM-1U module.
3.4 Ƙirƙiri Aikin Farko naku
3.4.1 Fara Aiki
Yanzu kun shirya don shirya aikace-aikacen ku don ESP32-C6-WROOM-1U module. Kuna iya farawa da
farawa/sannu_duniya aikin daga examples directory a cikin ESP-IDF.
Kwafi fara farawa/hello_world zuwa ~/esp directory:
¹ cd ~/sa
² cp -r $IDF_PATH/misaliamples/fara farawa/sannu_duniya.
Akwai kewayon example ayyukan a cikin exampLes directory a cikin ESP-IDF. Kuna iya kwafi kowane aiki kamar yadda aka gabatar a sama kuma ku gudanar da shi. Hakanan yana yiwuwa a gina examples in-place, ba tare da kwafi su farko ba.
3.4.2 Haɗa na'urar ku
Yanzu haɗa na'urar ku zuwa kwamfutar kuma duba ƙarƙashin abin da ke cikin tashar tashar jiragen ruwa a bayyane. Serial ports a Linux suna farawa da '/ dev/tty' a cikin sunayensu. Gudun umarni a ƙasa sau biyu, na farko tare da cire allon, sannan tare da toshewa. Tashar da ke bayyana a karo na biyu ita ce wacce kuke buƙata:
¹ ls / dev/tty*
Lura:
Rike sunan tashar jiragen ruwa da amfani kamar yadda zaku buƙaci shi a matakai na gaba.
3.4.3 Sanya
Kewaya zuwa kundin adireshin ku na 'hello_world' daga Mataki 3.4.1. Fara aikin, saita guntu ESP32-Cé6 azaman maƙasudi kuma gudanar da tsarin tsarin aikin 'menuconfig'.
¹ cd ~/esp/sannu_duniya
² idf.py saitin-manufa esp32cé6
³ iLdf.py menuconfig
Saita manufa tare da 'idf.py set- target esp32c6' yakamata a yi sau ɗaya, bayan buɗe sabon aiki. Idan aikin ya ƙunshi wasu gine-gine da tsarin aiki, za a share su kuma a fara farawa. Ana iya ajiye manufa a cikin canjin yanayi don tsallake wannan matakin kwata-kwata. Duba Zaɓin Makasudin don ƙarin bayani.
Idan matakan da suka gabata an yi su daidai, menu mai zuwa yana bayyana:
Hoto 3: Kanfigareshan Aikin - Tagar Gida
Kuna amfani da wannan menu don saita takamaiman masu canji na aikin, misali sunan cibiyar sadarwar Wi-Fi da kalmar wucewa, saurin sarrafawa, da sauransu. Za a iya tsallake tsarin aikin tare da menuconfig don “hello_word”. Wannan example zai gudu tare da tsoho sanyi
Launuka na menu na iya bambanta a tashar ku. Kuna iya canza kamanni tare da zaɓi '–style'. Da fatan za a gudanar da 'idf.py menuconfig -help' don ƙarin bayani.
3.4.4 Gina Aikin
Gina aikin ta gudana:
¹ idf.py ginawa
Wannan umarnin zai tattara aikace-aikacen da duk abubuwan ESP-IDF, sannan zai samar da bootloader, tebur na bangare, da binaries na aikace-aikacen.
Idan babu kurakurai, ginin zai ƙare ta hanyar samar da firmware binary .bin file.
3.4.5 Filashi a kan Na'urar
Finata binary ɗin da kuka gina a kan tsarin ku ta hanyar gudu:
1 idf.py -p PORT [-b BAUD] walƙiya
Maye gurbin PORT da sunan tashar tashar jiragen ruwa na ESP32-C6 daga Mataki: Haɗa na'urar ku.
Hakanan zaka iya canza ƙimar baud flasher ta maye gurbin BAUD tare da ƙimar baud ɗin da kuke buƙata. Adadin baud ɗin tsoho shine 460800.
Don ƙarin bayani kan muhawara idf.py, duba idf.py.
Lura:
Zaɓin 'flash' yana ginawa da walƙiya aikin ta atomatik, don haka gudanar da'idf.py gini' ba lallai bane.
Lokacin kamun kifi, zaku ga log ɗin fitarwa kamar haka:
Idan babu matsala a ƙarshen aikin walƙiya, hukumar za ta sake yin aiki kuma ta fara aikace-aikacen "hello_world".
3.4.6 Saka idanu
Don bincika idan da gaske "hello_world" yana gudana, rubuta 'idf.py -p PORT Monitor' (Kada ku manta da maye gurbin PORT da sunan tashar tashar ku).
Wannan umarni yana ƙaddamar da aikace-aikacen IDF Monitor:
Bayan farawa da rajistan ayyukan bincike gungura sama, yakamata ku ga "Hello duniya!" bugu daga aikace-aikacen.
Don fita IDF duba yi amfani da gajeriyar hanya Ctrl+].
Wannan shine duk abin da kuke buƙatar farawa tare da ESP32-C6-WROOM-1U module! Yanzu kun shirya don gwada wasu tsohonampa cikin ESP-IDF, ko tafi daidai don haɓaka aikace-aikacen ku.
US FCC Bayanin
Na'urar ta dace da KDB 996369 DO3 OEM Manual vO1. Da ke ƙasa akwai umarnin haɗin kai don masana'antun samfuran rundunar bisa ga KDB 996369 DO3 OEM Manual v01.
Jerin Dokokin FCC masu aiki
FCC Kashi na 15 Karamin C 15.247
Musamman Sharuɗɗan Amfani
Tsarin yana da WiFi da ayyukan BLE.
- Mitar Aiki:
- WIFI: 2412 ~ 2462 MHz
- Bluetooth: 2402 ~ 2480 MHz
- Zigbee/Thu:2405 ~ 2480 MHz - Adadin Channel:
WIFI: 11
Bluetooth: 40
– Zigbee/Thu: 26 - Modulation:
– WiFi: DSSS; OFDM
Bluetooth: GFSK
- Zigbee/Zare: O-QPSK - Nau'in: Sleeve Monopole Eriya
- Riba: 2.33 dBi Max
Ana iya amfani da ƙirar don aikace-aikacen lott tare da matsakaicin eriya 2.33 dBi. Mai ƙera rundunar da ke shigar da wannan ƙa'idar a cikin samfuran su dole ne su tabbatar da cewa samfur na ƙarshe ya bi ka'idodin FCC ta hanyar ƙima ko ƙima ga dokokin FCC, gami da aikin watsawa. Mai sana'anta ya kamata ya sani kar ya ba da bayani ga mai amfani na ƙarshe game da yadda ake girka ko cire wannan RF ɗin a cikin littafin mai amfani na ƙarshen samfurin wanda ya haɗa wannan ƙirar. Littafin jagorar mai amfani na ƙarshe zai haɗa da duk bayanan tsari da ake buƙata / faɗakarwa kamar yadda aka nuna a cikin wannan jagorar.
Tsare-tsaren Module masu iyaka
Bai dace ba. Samfurin samfurin guda ɗaya ne kuma ya dace da buƙatun FCC Sashe na 15.212.
Zane-zanen Eriya
Bai dace ba. Module ɗin yana da nasa eriya, kuma baya buƙatar bugu na runduna microstrip trace eriya, da sauransu.
La'akari da Bayyanar RF
Dole ne a shigar da tsarin a cikin kayan aikin mai watsa shiri kamar yadda aƙalla 20cm ana kiyaye shi tsakanin eriya da jikin masu amfani; kuma idan an canza bayanin bayyanar RF ko shimfidar tsarin, to, mai sana'anta samfurin da ake buƙata ya ɗauki alhakin tsarin ta canjin FCC ID ko sabon aikace-aikace. Ba za a iya amfani da ID na FCC na ƙirar akan samfurin ƙarshe ba. A cikin waɗannan yanayi, masana'anta za su ɗauki alhakin sake kimanta ƙarshen samfurin (ciki har da mai watsawa) da samun izinin FCC daban.
Antenna
Bayanin Antenna sune kamar haka:
- Nau'in: Sleeve Monopole Eriya
- Saukewa: 2.33DB
Anyi nufin wannan na'urar don masana'antun baƙi kawai a ƙarƙashin yanayi masu zuwa:
- Ƙila ba za a haɗa tsarin mai watsawa tare da kowane mai watsawa ko eriya ba.
- Za a yi amfani da tsarin tare da eriya (s) na waje wanda aka gwada da asali tare da wannan tsarin.
- Dole ne eriyar ta kasance ko dai ta kasance a haɗe ta har abada ko kuma a yi amfani da na'ura mai haɗawa da eriya 'na musamman'.
Muddin sharuɗɗan da ke sama sun cika, ba za a buƙaci ƙarin gwajin watsawa ba. Koyaya, masana'anta har yanzu suna da alhakin gwada samfuran ƙarshen su don kowane ƙarin buƙatun yarda da ake buƙata tare da shigar da wannan ƙirar (don tsohonample, watsawar na'urar dijital, buƙatun PC na gefe, da sauransu).
Lakabi da Bayanin Biyayya
Masu ƙera kayayyaki masu masaukin baki suna buƙatar samar da alamar ta zahiri ko e-lamba mai faɗi "Ya ƙunshi ID na FCC: 2AC7Z-ESPC6WROOMU" tare da ƙãre samfurinsu.
Bayani kan hanyoyin gwaji da ƙarin buƙatun gwaji
- Mitar Aiki:
- WiFi: 2412 ~ 2462 MHz
- Bluetooth: 2402 ~ 2480 MHz
- Zigbee/Thu: 2405~ 2480 MHz - Adadin Channel:
WIFI: 11
Bluetooth: 40
– Zigbee/Thu:26 - Modulation:
– WiFi: DSSS; OFDM
Bluetooth: GFSK
- Zigbee/Zare: O-QPSK
Dole ne masana'anta mai watsa shiri su yi gwajin hayaki mai haskakawa da gudanar da hayaki mai ban tsoro, da sauransu, bisa ga ainihin yanayin gwaji don mai watsawa na yau da kullun a cikin runduna, da kuma na'urori masu watsawa da yawa a lokaci guda ko wasu masu watsawa a cikin samfurin rundunar. Sai kawai lokacin da duk sakamakon gwajin hanyoyin gwaji suka bi ka'idodin FCC, to ana iya siyar da samfurin ƙarshe bisa doka.
Ƙarin gwaji, Sashe na 15 Ƙarfafan Sashe na B
Mai watsawa na yau da kullun FCC ce kawai aka ba da izini don FCC Sashe na 15 Subpart C 15.247 kuma cewa masana'anta samfurin suna da alhakin bin duk wasu dokokin FCC waɗanda suka shafi mai watsa shiri ba tare da tallafin takaddun shaida na zamani ba. Idan mai ba da kyauta ya tallata samfuran su azaman Sashe na 15 Subpart B (lokacin da kuma ya ƙunshi da'irar dijital-radiator ba da gangan ba), to mai bayarwa zai ba da sanarwar da ke nuna cewa samfurin ƙarshe na ƙarshe yana buƙatar gwajin yarda da Sashe na 15 Subpart B tare da na'urar watsawa ta zamani. shigar.
An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na Dokokin FCC. An ƙirƙira waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifarwa, masu amfani kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma aka yi amfani da shi daidai da umarnin, na iya haifar da tsangwama mai cutarwa ga sadarwar rediyo.
Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aiki ya haifar da tsangwama mai cutarwa ga rediyo ko liyafar talabijin, wanda za'a iya tantance shi ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara kutse ta ɗayan matakan masu zuwa:
- Sake daidaitawa ko matsar da eriya mai karɓa.
- Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
- Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
- Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.
Wannan na'urar ta bi Sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
- Wannan na'urar bazai haifar da tsangwama mai cutarwa ba.
- Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.
Tsanaki:
Duk wani canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.
Wannan kayan aikin ya cika FCC RF iyakokin fallasa hasken da aka tsara don yanayin da ba a sarrafa shi. Wannan na'urar da eriya ba dole ba ne su kasance tare ko aiki tare tare da kowane eriya ko mai watsawa. Dole ne a shigar da eriya da ake amfani da ita don wannan mai watsawa don samar da nisa na aƙalla 20 cm daga duk mutane kuma dole ne a kasance tare da su ko aiki tare da kowane eriya ko mai watsawa.
Umarnin Haɗin Kan OEM
Anyi nufin wannan na'urar don masu haɗin OEM kawai a ƙarƙashin yanayi masu zuwa:
- Ƙila ba za a haɗa tsarin mai watsawa tare da kowane mai watsawa ko eriya ba.
- Za a yi amfani da tsarin tare da eriya (s) na waje wanda aka gwada da asali tare da wannan tsarin.
Muddin sharuɗɗan da ke sama sun cika, ba za a buƙaci ƙarin gwajin watsawa ba. Koyaya, mai haɗin OEM har yanzu yana da alhakin gwada samfuran ƙarshen su don kowane ƙarin buƙatun yarda da ake buƙata tare da shigar da wannan ƙirar (don tsohonample, watsawar na'urar dijital, buƙatun PC na gefe, da sauransu).
Ingancin Amfani da Takaddun shaida na Module
A yayin da waɗannan sharuɗɗan ba za a iya cika su ba (misaliampwasu saitunan kwamfutar tafi-da-gidanka ko wurin haɗin gwiwa tare da wani mai watsawa), to, izinin FCC na wannan ƙirar a hade tare da kayan aikin rundunar ba a ɗaukan inganci kuma ba za a iya amfani da ID na FCC na module ɗin akan samfurin ƙarshe ba. A cikin waɗannan yanayi, mai haɗin OEM zai kasance da alhakin sake kimanta samfurin ƙarshe (gami da mai watsawa) da samun izinin FCC daban.
Ƙarshen Lakabin Samfura
Dole ne a yi wa samfurin ƙarshe lakabi a wurin da ake iya gani tare da masu biyowa: "Ya ƙunshi ID na Module Transmitter FCC: 2AC7Z-ESPC6WROOMU".
Bayanin Masana'antu Kanada
Wannan na'urar ta dace da RSSs na lasisin masana'antu Kanada. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
- Wannan na'urar bazai haifar da tsangwama ba; kuma
- Dole ne wannan na'urar ta karɓi kowane tsangwama, gami da tsangwama wanda zai iya haifar da aikin da ba a so na na'urar.
Bayanin Bayyanar Radiation
Wannan kayan aikin yana aiki da iyakokin yaduwar radiation na IC da aka saita don yanayin da ba'a iya sarrafawa ba. Wannan kayan aikin yakamata a girka su kuma ayi aiki dasu da mafi karancin tazara 20 cm tsakanin radiator da jikinka.
Sashe na 247 (6.4) RSS-5
Na'urar za ta iya dakatar da watsawa ta atomatik idan babu bayanin da za a watsa, ko gazawar aiki. Lura cewa wannan baya nufin hana watsa iko ko bayanin sigina ko amfani da lambobin maimaitawa inda fasahar ke buƙata.
Anyi nufin wannan na'urar don masu haɗin OEM kawai a ƙarƙashin sharuɗɗan masu zuwa (Don amfanin na'urar):
- Dole ne a shigar da eriya kamar yadda aka kiyaye 20 cm tsakanin eriya da masu amfani, da
- Ƙila ba za a haɗa tsarin mai watsawa tare da kowane mai watsawa ko eriya ba.
Muddin sharuɗɗa 2 na sama sun cika, ba za a buƙaci ƙarin gwajin watsawa ba. Koyaya, mai haɗin OEM har yanzu yana da alhakin gwada samfuran ƙarshen su don kowane ƙarin buƙatun yarda da ake buƙata tare da shigar da wannan ƙirar.
MUHIMMAN NOTE:
A yayin da waɗannan sharuɗɗan ba za a iya cika su ba (misaliampwasu saitunan kwamfutar tafi-da-gidanka ko haɗin gwiwa tare da wani mai watsawa), to, izinin Kanada ba a ɗauka yana aiki kuma ba za a iya amfani da ID na IC akan samfurin ƙarshe ba. A cikin waɗannan yanayi, mai haɗin OEM zai kasance da alhakin sake kimanta samfurin ƙarshe (ciki har da mai watsawa) da samun izinin Kanada daban.
Ƙarshen Lakabin Samfura
An ba da izinin wannan tsarin mai watsawa kawai don amfani a cikin na'ura inda za'a iya shigar da eriya ta yadda za'a iya kiyaye 20 cm tsakanin eriya da masu amfani. Dole ne a yi wa lakabin samfurin ƙarshe na ƙarshe a cikin fili mai zuwa tare da mai zuwa: "Ya ƙunshi IC: 21098-ESPC6WROOMU".
Bayanin Manual zuwa Mai amfani na Ƙarshe
Mai haɗin OEM dole ne ya sani kar ya ba da bayani ga mai amfani na ƙarshe game da yadda ake girka ko cire wannan RF ɗin a cikin littafin jagorar ƙarshen samfurin wanda ya haɗa wannan ƙirar. Littafin jagorar mai amfani na ƙarshe zai haɗa da duk bayanan tsari da ake buƙata / faɗakarwa kamar yadda aka nuna a cikin wannan jagorar.
Takardu masu alaƙa
- Takardar bayanan ESP32-C6 - Takaddun bayanai na kayan aikin ESP32-C6.
- ESP32-C6 Manual Reference Technical — Cikakken bayani kan yadda ake amfani da ƙwaƙwalwar ESP32-C6 da maɓalli.
- ESP32-C6 Jagororin Zane Hardware - Sharuɗɗa kan yadda ake haɗa ESP32-C6 cikin kayan aikin ku.
- Takaddun shaida
https://espressif.com/en/support/documents/certificates - Sabunta Takardu da Sabunta Kuɗin Sanarwa
https://espressif.com/en/support/download/documents
Yankin Mai Haɓakawa
- Jagoran Shirye-shiryen ESP-IDF don ESP32-C6 - Takaddun da yawa don tsarin ci gaban ESP-IDF.
- ESP-IDF da sauran tsarin ci gaba akan GitHub.
https://github.com/espressif - Dandalin ESP32 BBS - Injiniya-to-Injiniya (E2E) Community don samfuran Espressif inda zaku iya aika tambayoyi, raba ilimi, bincika ra'ayoyi, da kuma taimakawa warware matsaloli tare da injiniyoyin abokan aiki.
https://esp32.com/ - Jaridar ESP - Mafi kyawun Ayyuka, Labarai, da Bayanan kula daga mutanen Espressif.
https://blog.espressif.com/ - Duba shafuka SDKs da Demos, Apps, Tools, AT Firmware.
https://espressif.com/en/support/download/sdks-demos
Kayayyaki
- ESP32-C6 Series SoCs - Bincika ta duk ESP32-C6 SoCs.
https://espressif.com/en/products/socs?id=ESP32-C6 - ESP32-C6 Series Modules —- Bincika ta duk tushen ESP32-C6.
https://espressif.com/en/products/modules?id=ESP32-C6 - ESP32-C6 Series Devkits - Bincika ta duk ESP32-C6 na tushen devkits.
https://espressif.com/en/products/devkits?id=ESP32-C6 - ESP Product Selector - Nemo samfurin kayan masarufi na Espressif wanda ya dace da buƙatun ku ta hanyar kwatanta ko amfani da tacewa.
https://products.espressif.com/#/product-selector?language=en
Tuntube Mu
- Dubi shafuka Tambayoyin Talla, Tambayoyin Fasaha, Tsarin Da'ira & Tsarin PCB Review, samu Samples (Kantinan Kan layi), Kasance Mai Bayar Mu, Sharhi & Shawarwari.
https://espressif.com/en/contact-us/sales-questions
Tarihin Bita
| Kwanan wata | Sigar | Bayanan sanarwa |
| 2024-01-26 | v1.0 | Sakin hukuma |
Sanarwa da Haƙƙin mallaka
Bayani a cikin wannan takarda, gami da URL nassoshi, ana iya canzawa ba tare da sanarwa ba.
DUK BAYANIN KASHI NA UKU A CIKIN WANNAN TAKARDUN ANA BADA KAMAR YADDA BABU WARRANCI GA GASKIYA DA INGANTACCEN SA.
BABU WARRANTI DA AKA BAYAR DA WANNAN TAKARDON DON SAMUN SANUWARTA, RA'AYIN CUTARWA, KWANTA GA KOWANE MUSAMMAN MANUFA, KUMA BABU WANI GARANTI WANDA YA FITO DAGA WANI SHARI'A, BAYANI KO SAMUN SAUKI.AMPLE.
Duk wani abin alhaki, gami da abin alhaki don keta haƙƙin mallakar mallaka, da ya shafi amfani da bayanai a cikin wannan takaddar ba a musanta ba. Babu wani lasisi da aka bayyana ko bayyana, ta estoppel ko akasin haka, ga kowane haƙƙin mallakar fasaha da aka bayar anan.
Alamar Memba ta Wi-Fi Alliance alamar kasuwanci ce ta Wi-Fi Alliance. Tambarin Bluetooth alamar kasuwanci ce mai rijista ta Bluetooth SIG.
Duk sunayen kasuwanci, alamun kasuwanci da alamun kasuwanci masu rijista da aka ambata a cikin wannan takaddar mallakin masu su ne, kuma an yarda dasu.
Haƙƙin mallaka© 2024 Espressif Systems (Shanghai) Co., Ltd. Duk haƙƙin mallaka.
Takardu / Albarkatu
 |
ESPRESSIF ESP32-C6-WROOM-1U Bluetooth WiFi 2.4 GHz Module [pdf] Manual mai amfani ESP32-C6-WROOM-1U, ESP32-C6-WROOM-1U Bluetooth WiFi 2.4 GHz Module, Bluetooth WiFi 2.4 GHz Module, WiFi 2.4 GHz Module, 2.4 GHz Module, Module |