EVENT LIGHTING APRO4-IP DMX Controller

Don amincin ku, da fatan za a karanta wannan jagorar mai amfani a hankali kafin amfani.
Hasken taron yana da haƙƙin sake duba littafin a kowane lokaci. Bayani da ƙayyadaddun bayanai a cikin wannan jagorar ana iya canzawa ba tare da sanarwa ba. Hasken taron ba shi da wani alhaki ko alhakin kowane kurakurai ko rashi. Da fatan za a tuntuɓi Hasken taron don kowane bayani ko bayani game da wannan abu.

SIFFOFI

• DMX 512, RDM, Artnet and sACN support
• Tsari mai nisa ta hanyar ciki webshafi
• Update firmware on Webshafi
• DMX output isolation
• RJ45 Ethernet B input with POE（DC12V 2A）
• Nuni LCD
• Gigabit network, 100/1000mbps port speed
• IP65 Rating

PANEL A KANVIEW

1. Ethernet port RJ45
2. Ethernet port RJ45
3. Power in/out True1
4. 2xDMX5pin connectors
5. 2xDMX5pin connectors
6. mariƙin fiɗa
7. LCD Display protection cover

MANA
Below is controller Menus map

BabbanMenu	Sub Menu 1	Sub Menu 2	Darajar/Zaɓi	Default
Cibiyar sadarwa	Yanayin IP		DHCP	A tsaye
			A tsaye
	Adireshin IP		2.xx.xx.xx	2.xx.xx.xx
	Jigon Subnet		255.0.0.0	255.0.0.0
DMX Port	Yarjejeniya	Artnet		Artnet
		SACN
	Start Net		000-127	000
	Fara Duniya		000-255	000
	Tashar ruwa 1	Yanayin	Kashe	On
			On
		NET	000-127	000
		Duniya	000-255	000
	Tashar ruwa 2	Yanayin	Kashe	On
			On
		NET	000-127	000
		Duniya	000-255	001
	Tashar ruwa 3	Yanayin	Kashe	On
			On
		NET	000-127	000
		Duniya	000-255	002
	Tashar ruwa 4	Yanayin	Kashe	On
			On
		NET	000-128	000
		Duniya	000-255	003
			A kashe
Saituna	Darajar DMX		20Hz	30Hz
			25Hz
			30Hz
			35Hz
			40Hz
	RDM	A kashe		A kashe
		Kunna
	Nuna Kunnawa	Koyaushe		1 Min
		30 dakika
		1 Min
		5 Min
	Asarar sigina	Rike DMX		Rike DMX
		Stop Output
	Yanayin Haɗa	PH		PH
		LTP
	Sake saitin masana'anta	A'a		A'a
		Ee

WEB daidaitawa

NET device network IP mode can set to DHCP mode or Static mode.

Yanayin DHCP

• When APRO4‐IP is set to DHCP mode, you need to set the computer to DHCP also. And use a router for linking computer and APRO4‐IP device. The controller will show IP address like below:
• Enter IP address in your web browser, then you can login webpage to configure the parameter of controller.

Shigar da kalmar sirri: admin

Yanayin a tsaye

• When APRO4‐IP device is set to Static mode, you need to set computer to be Static mode also. APRO4‐IP device will show IP address as below:
• Then set the IP address of computer is in the same IP range manually. For example: IP address must start with 2 according to APRO4‐IP address. And netmask is same with 255.0.0.0.
• Input static IP address of APRO4‐IP device in your browser, then you can login to configure the parameter of device.

Shigar da kalmar sirri: admin

• When log on NET Config web, the first page show the information about APRO4‐IP.
• Following  is  for  Network  setting,  you  can  set  IP  mode  to  be  Static  or  DHCP,  IP  Address,and Subnet Mask. After setting, click Save button .
• For DMX Port page , it is used for DMX Port setting. You can select Protocol to be Artnet or sACN, and set each port as input or output.
• On the page of Setting , you can set DMX Rate, RDM , Display On and Signal Loss. After setting, click Save to store the setting.
• DMX  Rate:  You  can  set  20Hz,  25Hz,  30Hz,  35Hz,  40Hz,  30Hz  is default setting.
• RDM: You can set RDM to be Disable or Enable.
• There is 4 options for Display On mode: Always, 30Sec, 1Min, 5Min.
• Asarar sigina: Can set as Hold DMX or Stop Output.
• You can return to factory setting by click Factory Reset button.
• On Update page, you can update software of fixture by selecting the update software file of APRO4‐IP.
• On the last page, you can reset password.

BAYANI

• Inarfi a cikin: AC 100‐240V,50/60Hz
• Amfanin wutar lantarki: AC240V 50HZ 0.05A
• Girma: 215.3×150.5x42mm 4.2W
• Nauyi: 1.43Kg
• POE 802.3af
• IP65

GIRMA

Garanti

Da fatan za a koma zuwa dila na gida ko tuntuɓi Hasken Bidiyo. www.event‐lighting.com.au

Tambayoyin da ake yawan yi

How do I reset the APRO4-IP device to factory settings?

To perform a factory reset on the APRO4-IP device, access the Factory Reset option in the Main Menu under Settings. Confirm the reset to restore the device to its default configuration.

What is the default IP address for the APRO4-IP device?

The default IP address for the APRO4-IP device is set to DHCP mode. If you switch to Static mode, you can set a specific IP address within the range provided in the user manual.

Takardu / Albarkatu

EVENT LIGHTING APRO4-IP DMX Controller [pdf] Manual mai amfani APRO4-IP, APRO4-IP DMX Controller, DMX Controller, Controller

Magana

• Manual mai amfani