FIRSTEC GMT3-GM8 Shirye-shiryen Mota da Rufewa

Ƙayyadaddun bayanai

• Yi: DL-GM8 Chevrolet
• Samfura: Trailblazer PTS AT
• Shekara: 2021-2024
• Sanya Nau'inku: 2
• Haske: Park / Auto
• Tsarin BCM: LSCC
• Zabin fasali: Babu

Umarni

Yi	Samfura	Shekara	Shigar	CAN	Haske	Nau'in	BCM	Kanfigareshan
DL-GM8					Park / Auto			Siffar Zabin
Chevrolet	Trailblazer PTS AT	2021-24	Farashin 2	Nau'in B	Nau'in A	PTS	LSCC	Babu

• Firmware: Wannan shigarwa yana amfani da BLADE-AL(DL) -GM8, flash module da sabunta firmware mai sarrafawa kafin sakawa.
• Shigar: Nau'in tushen shigarwa na 2 CAN bayanai daga farar mai haɗin BCM, buƙatar amfani da mai haɗin 'B-connector, mai haɗin da aka yiwa alama'A' ba a yi amfani da shi ba.
• Haske: Nau'in A fitilun (daidaitattun fitilun ajiye motoci) ana ba da su, kamar Nau'in H (fitilun haɗari), duka an haɗa su a cikin kayan doki don nunin gani na matsayin lokacin aiki / bincike. Ana buƙatar sake kunna kayan aikin CM I/O (launin toka), ba tare da la'akari da wane nau'in da kuka zaɓa don amfani da su ba, an samar da zaɓuɓɓukan biyu don zaɓinku. Idan kun zaɓi haɗari kuna buƙatar saita POC ɗin da aka zaɓa don ɗayan zaɓuɓɓukan sarrafa haɗari masu zuwa, Hazard1 (zaɓin POC #30 (na ɗan lokaci) ko Hazard2 (zaɓin POC #23 (latching), dangane da aikin sauya haɗari.
• Makulli: Ba a buƙatar haɗin kulle CM don wannan nau'in shigarwa. Ana sarrafa makullin ƙofa ta siginonin bayanai don haka haɗin analog ɗin ba lallai bane. Tsare mai haɗa kayan aiki kamar yadda ake buƙata.

Ba a buqatar mai haɗin kulle don wannan nau'in shigarwa. 🙂

FTI-GMT3 - Bayanan shigarwa da Kanfigareshan

• HADIN DA AKE BUKATA, DUBA NOTE A SAMA
• BA'A BUKATA BAKI DAYA
• ABUBUWAN DA AKE BUKATA - IYA RUWAN 'B'
• ABUBUWAN DA AKE BUKATA - KEY IRI 'PTS'

FTI-GMT3 – DL-GM8 – Nau’in 1

Lambobin Kuskuren Shirye-shiryen LED
Module LED walƙiya RED yayin shirye-shirye

• 1x - ku Babu bayanan SWC, duba mai haɗin BLUE da zaɓi na CAN
• 2x - kuBabu bayanan hana motsi, tabbatar da masu haɗin GREEN da BLADE
• 3x - ku Babu HS CAN
• 4x - ku Babu kunnawa, duba mai haɗin BLUE da zaɓi na CAN
• 5x - ku VIN bai dace ba Webmahada bayanai, lamba injiniya
• 6x - ku Babu bayanan hana motsi, duba mai haɗin GREEN ko riƙe IGN
• 7x - ku Kuskuren bayanan da ba a iya motsi ba, tabbatar da amfani da maɓalli ɗaya kawai
• 8x - ku Babu bayanan hana motsi, duba masu haɗin GREEN da BLADE
• 9x - ku Kuskuren bayanan da ba a iya motsi, duba sama
• 10x - ku Kuskuren bayanan Klon, tsarin sake saiti kuma maimaita shirye-shirye
• 11x - ku Babu kunnawa, duba mai haɗin BLUE da zaɓi na CAN

KASHE GASKIYA

1. Zamar da harsashi cikin naúrar. Maɓallin sanarwa a ƙarƙashin LED.
2. Shirye don Tsarin Tsarin Tsarin Module.

HANYAR SHARRIN MULKI

NOTE
Lokacin yin shirye-shirye, maɓalli ɗaya kawai za a yi amfani da su. Dole ne ɗayan ya kasance aƙalla taku 10 nesa da abin hawa.

1. Cire baturi daga maɓalli. Sanya maɓallin maɓalli akan mai karanta maɓalli a cikin madaidaicin hannu ko na'ura wasan bidiyo na tsakiya.
2. Rufe kofar direba. Sake buɗe kofar direba don tada bas ɗin bayanai. 
3. Danna maɓallin farawa sau biyu [2x] (ko danna maɓallin farawa 5 seconds) zuwa matsayi ON.
4. Jira, LED zai juya m ja.
   
5. Danna maɓallin farawa sau ɗaya [1x] zuwa KASHE matsayi.
6. Jira, LED zai yi haske BLUE da sauri.
7. GARGADI:
   • Cire haɗin wuta a ƙarshe.
   • Cire haɗin RS daga abin hawa.
8. Haɗa RS zuwa kwamfuta kuma ci gaba tare da tsawaita shirye-shirye.
9. GARGADI: Kar a latsa maɓallin shirye-shirye na RS. Haɗa wuta ta farko. Haɗa RS zuwa abin hawa.
10. Danna maɓallin farawa sau biyu [2x] (ko danna maɓallin farawa 5 seconds) zuwa matsayi ON.
11. Jira, LED zai juya m BLUE na 2 seconds.
12. Danna maɓallin farawa sau ɗaya [1x] zuwa KASHE matsayi.
13. Cire babban maɓalli daga mai karanta maɓalli. Saka baturi a maɓalli.
    1. Idan motar tana sanye da gate mai ƙarfi:
       Buɗe ku rufe ƙofar ɗagawar wuta tare da maɓallin OEM.
14. An kammala Tsarin Shirye-shiryen Module.

GARGADI: KARANTA KAFIN REMNO OTICETE A FARA MOTAR

MUHIMMANCI
Duk ƙofofin abin hawa dole ne a rufe kuma a kulle su kafin jerin fara nesa. Rashin yin biyayya zai haifar da rashin aiki mai nisa.

KARBAR HANYA - GA MAI MOTAR

NOTE
Duk ƙofofin abin hawa dole ne a rufe kuma a kulle su kafin jerin fara nesa.

LOKACIN YANAYIN ZUWA!

1. Latsa buše akan OEM ko bayan kasuwa mai nisa ko neman canji.
2. LOKACI RESTRICTI N
   A cikin 45 SECONDS daga mataki na baya:
   • Bude kofar abin hawa.
   • Shigar da abin hawa.
   • Rufe kofar abin hawa.
   • Danna kuma saki fedal BRAKE.
3. An kammala aiwatar da aikin.

Rashin bin hanya a cikin taƙaitaccen lokaci zai haifar da kashe injin abin hawa.

WWW.IDATALINK.COM
Automotive Data Solutions Inc. © 2020
COM-BLADE-AL(DL) -GM8-EN
Doc. Na: ##75068##20210331

Tambayoyin da ake yawan yi (FAQ):

Tambaya: Menene zan yi idan mai farawa na nesa ya yi kuskure?
A: Tabbatar cewa duk ƙofofin abin hawa suna rufe kuma a kulle su kafin fara jerin farawa mai nisa don guje wa rashin aiki.

Tambaya: Ta yaya zan san ko tsarin shirye-shiryen module ya yi nasara?
A: LED zai nuna launuka daban-daban a takamaiman matakai yayin aiwatar da shirye-shirye. Bi umarnin a hankali kuma tabbatar da an kammala kowane mataki kamar yadda aka bayyana.

Takardu / Albarkatu

FIRSTEC GMT3-GM8 Shirye-shiryen Mota da Rufewa [pdf] Jagoran Shigarwa GMT3-GM8, CM7000-7200, CM-900S-900AS, GMT3-GM8 Shirye-shiryen Mota da Rufewa, GMT3-GM8, Shirye-shiryen Mota da Rufewa, Shiri da Rufewa, Rufewa

Magana

• Manual mai amfani