Saukewa: 20250317
Bayani na 111631
EVO DUK A cikin Kewayon Bayanai guda ɗaya da Module na Interface
THAR-SUB4 THARNESS TSAYA KADAI SHINE
KARIN BAYANI – SHAWARAR GIRMAN WIRING
MOTA
SHEKARU
2023-2024
SUBARU
Hawan hawan
Tura-zuwa-Farawa
Ayyukan abin hawa suna goyan bayan wannan zane (aiki idan an sanye su)
- Immobilizer bypass
- Kulle
- Buɗe
- Hannun hannu
- kwance damara
- Ganga (bude)
- Fitilar Yin Kiliya
- Zafafan Kujeru
AUX.1: - Rear Defrost
- Rufe RAP
- Tachometer
- Matsayin Ƙofa
- Matsayin gangar jikin
- Matsayin Birkin Hannu
- Matsayin Birkin Ƙafa
- Amintaccen Take
ANA BUKATAR MUSULUN DA KWADAYI:
QR CODE
AKAN LABARI DA AKA KEFE BAYAN: 2019
SHARHIN FIRMA
93.[01] MARAMIN
Don ƙara sigar firmware da zaɓuɓɓuka, yi amfani da FLASH LINK UPDATER ko FLASH LINK MOBILE Tool, wanda aka sayar daban.
Zaɓin kewayawa shirin:
| ZABI NA RAKA | BAYANI |
| C1 | Matsayin Nesa na OEM (Kulle/Buɗe) saka idanu |
| D6 | Tura-zuwa-Farawa |
IDAN BA'A SAKA MOTAR DA PIN MAI AIKI BA:
A11  |
Hood jawo (Halin fitarwa). |
Zaɓin kewayawa shirin
(Don rufe RAP):
| D5 | Kulle bayan farawa |
BAYANI
A TABBATAR DA KALMAR BA YA CIKIN MOTAR LOKACIN FARUWA.
Abubuwan da ake buƙata (Ba a haɗa su ba)
1X RF KIT
WAJIBI SHIGA
MATSAYIN HOOD: DOLE NE A SHIGA HANYAR HANYAR HODO IDAN ANA IYA FARA MOTAR DA BUDE HOD, SATA AIKI A11 TO KASHE.
A11
Sanarwa: shigar da abubuwan tsaro na wajibi ne. Murfin kaho muhimmin abu ne na tsaro kuma dole ne a shigar dashi.
DOLE NE WANI ƙwararren ƙwararren masani ne ya shigar da wannan tsarin. KUSKUREN CIN HANNU NA IYA SANYA ILLAR MOTAR TA DUNIYA.
BANGAREN DA AKE BUKATA (BA A HADA BA)
TSAYA KADAI TSAYA
Zaɓin keɓancewar shirin tare da nesa na oem:
| ZABI NA RAKA | BAYANI |
| C1 | OEM Nesa Kulawa |
Zaɓin keɓancewar shirin tare da eriyar RF KIT:
| ZABI NA RAKA | BAYANI |
| H1 zuwa H6 | RF Kits masu goyan bayan kuma zaɓi RF Kit |
AIKI MAI NASARA
Ayyukan farawa na nesa na 3x LOCK tare da ikon nesa na OEM ba a ba da shawarar ba, ainihin abin hawa na nesa ba zai yi aiki ba yayin da injin ke gudana.
RF KIT da ake buƙata (ana siyarwa daban)
CIWON NASARA STARTER
MODULE RED LED
x2 flash: birki ON
x3: Babu tak
x4 flash: kunnawa kafin farawa
x5 flash: Buɗe Hood
KATIN GARGAƊI MAI NASARA
YANKE WANNAN KATIN GARGADI KA DANNA A WURI MAI GANGAN: ko yi amfani da fakitin RSPB, Ana sayar da shi daban.
GARGADI
MATSALAR NASARA
ANA IYA FARA MOTAR DA KOWANE: DANNA BUTTIN KULA AKAN OEM SAU 3 a jere ko ta wayar salula. KUNNA MANZON TSIRA DA AKE KWANA KARKASHIN DASHBOARD KAFIN AYI AIKI A MOTAR.
HANYAR CIN HANYAR WAYAR TA atomatik
TSARIN SHIRIN KYAUTA KYAU 1/3
Ajiye sauran OEM sun nisa daga abin hawa. Mafi ƙarancin mita 3 (ƙafa 10).
- Latsa ka riƙe maɓallin shirye-shirye: mahaɗin 4-Pin (Data-Link). Saka
The Blue, Red, Yellow and Blue & Red LEDs za su haskaka a madadin.
- Saki maɓallin shirye-shirye lokacin da LED ke BLUE.
Idan LED ɗin ba ta da ƙarfi BLUE cire haɗin haɗin 4-Pin (Data-Link) kuma koma mataki na 1.
- Saka sauran masu haɗin da ake buƙata.
- Kar a danna fedar birki.
Danna maɓallin START/STOP sau biyu don kunna kunnawa.
- Danna kuma saki maɓallin shirye-shirye sau ɗaya (1x).
- Danna maɓallin START/STOP sau ɗaya don kashe wutan.
- Cire baturin daga nesa na OEM 1.
Ka kiyaye sauran OEM nesa daga abin hawa. Mafi ƙarancin mita 3 (ƙafa 10).
- Sanya nesa na OEM (babu baturi) kusa da gaban maɓallin START/STOP kamar yadda aka nuna.
- Danna fedar ƙafar ƙafa.
Saki fedal. - Danna maɓallin START/STOP sau ɗaya don kashe wutan.
- Sanya nesa na OEM (babu baturi) kusa da gaban maɓallin START/STOP kamar yadda aka nuna.
- Danna fedar ƙafar ƙafa.
Wutar abin hawa zai kunna.
LED ɗin YELLOW zai kunna.
RED LED zai kashe.
Saki fedal. - Danna maɓallin START/STOP sau ɗaya don kashe wutan.
Za a musanya LEDs ɗin JAN da YEELLOW.
- Cire haɗin duk masu haɗawa da kuma bayan mahaɗin Data-Link (4-pins).
- Yi amfani da kayan aiki:
FLASH LINK UPDATER ko FLASH LINK MOBILE don ziyarci menu na DCryptor.
* Abubuwan da ake buƙata (ba a haɗa su ba)
- BAYAN AN KAMMALA SHIRIN DCRYPTOR
Koma kan abin hawa kuma sake haɗa mahaɗin 4-Pin (Data-Link) sannan bayan, duk sauran mai haɗawa.
Yanzu an tsara tsarin.
HANYAR TABBATAR DA TARBIYYA / KARARAWAR NAN
AYYUKA
Injin zai mutu lokacin da aka buɗe kofa idan ba a buɗe motar ba.
Alamar Module
Sanarwa: Sabunta Firmware da Jagoran shigarwa
An buga sabunta firmware da jagororin shigarwa akan mu web site akai-akai. Muna ba da shawarar sabunta wannan tsarin zuwa sabuwar firmware kuma zazzage sabuwar jagorar shigarwa kafin shigar da wannan samfur.
GARGADI
An bayar da bayanan da ke kan wannan takardar bisa (kamar yadda yake) ba tare da wakilci ko garantin daidaito komai ba.
Hakki ne kawai na mai sakawa don bincika da tabbatar da kowace kewaye kafin haɗawa da ita. Ya kamata a yi amfani da injin bincike mai aminci na kwamfuta ko multimeter na dijital kawai. FORTIN ELECTRONIC SYSTEMS ba su da wani alhaki ko alhakin komai dangane da daidaito ko kudin bayanan da aka kawo. Shigarwa a cikin kowane hali shine kawai alhakin mai sakawa yana yin aikin kuma FORTIN ELECTRONIC SYSTEMS ba shi da wani alhaki ko alhakin komai sakamakon kowane nau'in shigarwa, ko an yi shi da kyau, ba daidai ba ko kuma wata hanya. Ba mai kera ko mai rarraba wannan tsarin ba ne ke da alhakin lalacewar kowace iri a kaikaice ko kai tsaye da wannan tsarin ya haifar, sai dai maye gurbin wannan tsarin idan akwai lahani. Dole ne ƙwararren masani ya shigar da wannan ƙirar. Bayanin da aka kawo jagora ne kawai. Wannan jagorar koyarwa na iya canzawa ba tare da sanarwa ba. Ziyarci www.fortinbypass.com don samun sabon salo.
Wannan jagorar na iya canzawa ba tare da sanarwa ba. Duba www.fortin.ca ga latest version.
TAIMAKON FASAHA
Waya: 514-255-TAIMAKA (4357)
1-877-336-7797
KARIN JAGORA
www.fortinbypass.com
WEB LABARI
Takardu / Albarkatu
 |
FORTIN EVO DUK A cikin Kewayon Bayanai guda ɗaya da Module na Interface [pdf] Jagoran Shigarwa THAR-SUB4, EVO-ALL, Subaru Ascent 2023, EVO ALL A cikin Kewayon Bayanan Bayanai guda ɗaya da Module na Interface, EVO ALL, Duk A cikin Keɓancewar Bayanai guda ɗaya da Module na Interface, Kewayon Bayanai ɗaya da Module Interface, Module Interface, Module |