GRAPHTEC Single Plotter Cutting Manager App Manual

GRAPHTEC Single Plotter Cutting Manager App

INTERFACE MAI AMFANI

1. Yanke file kafinview.
2. Gudanarwar daidaitawa.
3. Matsayin mashaya.
4. Yana zaɓar yankan file.
5. Bude yanke karshe file.
6. Sarrafa don matsar da kafofin watsa labarai gaba ko baya.
7. Kamara kafinview.
8. Don saita tazara tsakanin gindin kowace alamar baƙar fata.
9. Don saita girman alamun baƙar fata.
10. Kunna ko kashe yanayin mara komai.
11. Don saita tazara tsakanin kowace lakabin.
    Duk wani karin iyaka a kasan yankanku file an ƙara zuwa mataki.
12. Don saita ƙarfin ɓangarorin Graphtec da ƙara zurfin yankan. Ƙimar sa na iya zama daga 1 zuwa 31. Mafi yawan dabi'u a yankan lakabi daga 7 zuwa 9.
13. Don saita saurin yankewa. Darajarsa na iya zama daga 50 zuwa 600. Ƙimar da aka fi sani a cikin lakabin lakabin ita ce 600. Idan kana da ƙarfin yankewa fiye da 9, za ka iya buƙatar rage saurin yanke don samun daidaitattun daidaito.
14. Tuta don ƙayyade adadin kwafin da za a yanke yayin aikin yankewa da aka ƙaddamar da maɓallin "Fara", in ba haka ba mai yin makirci zai ci gaba da tsayawa a ƙarshen kafofin watsa labarai.
15. Yana ƙidaya adadin kwafin da aka yanke tun danna maɓallin "Fara".
16. Sashe inda za a saka adadin kwafin da ake buƙatar yanke.
17. Maɓallin Fara/Soke. Ana amfani dashi don ƙaddamarwa ko dakatar da aikin yankewa.
18. Maɓallin Dakata/ Ci gaba. Ana amfani da shi don dakatarwa ko ci gaba da aikin yanke.
19. Ana amfani da shi don ƙaddamar da yanke guda ɗaya don barin mai amfani ya duba sigogin yanke.
20. Nagartattun sarrafawa.
21. Taimako: a nan za ku iya samun hanyar buɗe littafin mai amfani, da jagororin bidiyo masu amfani.
22. Lambar kushin: lambar allo mai amfani ga allon taɓawa.
23. Duba ƙarfi: Idan ka danna wannan maballin mai ƙirƙira zai yi murabba'i 5 kowanne tare da ƙarfin yanke daban. Lambar da ke cikin murabba'in za ta nuna nawa aka karu ko raguwa. Wannan yana da amfani don nemo cikin sauri mafi dacewa ƙimar ƙarfi don kayan ku. duk da haka muna ba da shawarar farawa da ƙananan dabi'u, don kada a lalata tabarmar yanke da gangan tare da manyan murabba'ai.
    ZABI NA CIGABA
24. Saituna
25. Saituna don masana'antu 4.0
26. Jerin gungumen azaba
27. Saita yaren mu'amala
28. Mayar da saitunan mai ƙirƙira
29. Ƙarin bayani

1. Lokacin da kuka ƙaddamar da yanke tare da sababbin abubuwan biya, za a ƙara su zuwa deltas. deltas yana adana abubuwan da aka ajiye.
2. Duk layin magenta 100% a cikin yankan ku file za a gane a matsayin dashed. Anan zaka iya saita tsayin yanke da tazara tsakanin kowanne akan su. Dole ne su zama aƙalla 0.1mm, kuma kada su wuce 819mm.
3. Anan zaku iya zaɓar kunna ko kashe kafofin watsa labarai ko firikwensin lamination. Idan an duba “Media/Lamination sensosi”, lokacin da kayan ya ƙare, software ta dakatar da yanke kuma za ta ba ku faɗakarwa.
4. Matsakaicin ƙuƙumman yanke.
5. Idan an kunna rarrabuwar yanke, software ɗin za ta zaɓi tsari ta atomatik na yanke duk sifofin da ke kan file. In ba haka ba, yanke zai bi oda .pdf layers.
6. Lokacin da kake buga naɗaɗɗen lissafin ku, wani lokaci kuna iya samun murdiya akan kayan aikinku. A wannan yanayin, ko da tare da daidaitaccen saitin gyare-gyare, yanke maiyuwa ba zai dace da bugun ku ba. Dole ne ku kunna mai gyara murdiya, kuma saita gyara. Kyakkyawan darajar za ta shimfiɗa yanke a kan wannan axis, in ba haka ba tare da mara kyau, yanke zai zama mafi matsawa.
7. Tare da kayan bakin ciki ba za a iya rufe yanke ba. Don gyara wannan, kunna wuce gona da iri, sannan saita nawa kuke son farawar ruwa da wuri, ko ƙare daga baya. Kuna iya tsammanin ko jinkirta ƙarshen yanke har zuwa 0.9mm ga kowane ɗayan.
8. Duba sigogin yanki zai baka damar canza matsayin wurin dubawar Black-Mark, wanda shine murabba'in shuɗin da aka nuna a gaban kyamara.view yayin da yanayin babu komai ya ƙare.
9. Idan bugu naku ya gurbata fitar da alamar baƙar fata, zaku iya canza juriyar don bari cam ɗin ya gane shi. Haƙuri dole ne ya zama kyawawan dabi'u.
   Idan gefen baƙar fata ɗinku ya fi 4mm (na 4x4mm) ko 2mm (na 2x2mm), dole ne ku rage mafi ƙarancin yanki da 100, har sai an gane alamar. Idan gefen alamar ku ya fi 4mm (na 4x4mm) ko 2mm (na 2x2mm), dole ne ku ƙara iyakar yanki da 100, har sai an gane alamar.
10. Danna don mayar da saitunan tsoho.
11. Yi watsi da canje-canje kuma rufe taga.
12. Ajiye canje-canje kuma rufe taga.
13. Mai yiwuwa ba za a buga aikin zane-zane ba kai tsaye ba.Lokacin da wannan ya faru, layin yankan za su sami matsayi daban-daban daga aikin zane na ku. Don gyara wannan za ku iya juya yanke ku.
    Kibiya kusa da akwatin rubutu tana nuna maka inda za a juya yanke ka. Yawancin lokaci zane-zane bai kamata ya zama jujjuyawa da yawa ba. Lokacin da kuka duba juyawa yankan muna ba ku shawarar ku canza ta digiri 0.1 tare da kibau ƙimar ku, sannan ku ci gaba da gwajin yanke.
    MATAKI
    1. Duba wasa tsakanin yanke tare da bugawa.
    2. Juya yanke-yanke don nemo madaidaicin karkata (har sai layukan yanke da layukan da aka buga sun yi daidai da juna).
    3. Daidaita ɓangarorin don dacewa da layukan yanke zuwa layukan da aka buga
14. Wannan maɓallin yana ba ku damar saita ƙimar halin yanzu a cikin ƙirar ku azaman sabon saiti na kowane lokaci zaku loda sabo file.
    Idan ka danna shi taga daya zai bayyana. Ta hanyarsa za ku iya zaɓar don sabunta saitattun saitattun saiti, saitattun saitunan ko duka biyun
15. Wannan maballin yana ƙayyade ko lokacin da yanke ya fara a tsakiyar gefen tsaye, ko a'a.

Yanayin QR (16)
Tare da kunna lambar qr, kamara za ta duba lambar barcode kuma ta loda yanke ta atomatik file da alamar nisa.
The files da software za ta dauka dole ne a ƙunshe a cikin babban fayil ɗin lambar lambar (default location C:\Cutting Manager\Barcode). files fayil).
Da zarar an yi shi, mai amfani don yanke yana da gwajin farawa ko yanke gwajin kawai.

Babban fayil na Barcode
Yana buɗe babban fayil ɗin barcode don sanyawa cikin yanke files yayin aiki tare da yanayin qr

Maɓalli 1 da 2 (17)
Zaɓi wane mai ƙirƙira don amfani da daidaita sigoginsa

Saitunan masana'antu 4.0 (25)

Anan akwai duk saitunan da suka wajaba don sadarwar masana'antar 4.0 (TCP/IP).
Da zarar kun kunna uwar garken, injin zai fara samuwa akan hanyar sadarwar.
Bayan haka zaka iya saita IP (idan an saita zuwa "auto" zai zama ta atomatik na adaftar cibiyar sadarwa ta ƙarshe) da tashar jiragen ruwa.

Rahoton (26)

Rahoton zai nuna raguwar da tsarin Cutting Manager ke gudanarwa.
Ana ƙara kowane rahoton zaman ta atomatik kuma a adana shi cikin rahoton tarihi lokacin da aka rufe mai sarrafa yanke.

Kuna iya samun cikakken tarihin rahoton file na duk ayyukan da ake gudanarwa tun lokacin da aka shigar da yankan komin dabbobi zuwa wannan hanyar "C:/Unit Cutting Manager/Report/CutHistory.txt"
Danna "SAVE AS" zai adana duk rahoton zaman aiki da kuka zaba don adanawa

Ana ajiye sigogin yanke bayan kowane aikin da aka kammala.
Don haka lokaci na gaba da za ku sake buɗe software, za ku ƙara ta atomatik a cikin mahallin saitunan da kuka yi amfani da su tare da file zaɓi (ƙarfi, saurin gudu, yanayin yanke,…)

YADDA AKE SAMUN SOFTWARE

1. Je zuwa Control Panel.
2. Unistall Unit Cutting Manager.
3. Sauke daga website da sabon Cutting Manager saki da gudanar da shigarwa.

ZABEN NA'URA
Duk lokacin da ka toshe raka'a biyu (BA ZA KA IYA AMFANI DA KYAU A DAYA BA) zuwa pc, taga mai zaɓin na'urar zata nuna, kuma zata baka damar zaɓar na'ura mai aiki.
YAYINDA AKE AIKI DA RAKA'A GUDA BIYU A LOKACI GUDA DAYA, DON ALLAH YI AMFANI DA HUKUNCIN USB 3.0 (HANAN ANA HANYA ZUWA PORTUS 3.0)

SANA'A 4.0

BAYANIN SADARWA
Dole ne aikace-aikacen mai amfani ya sadarwa tare da uwar garken Unit ta amfani da tcp/ip.
Ta hanyar tsoho uwar garken ip iri ɗaya ce ta hanyar sadarwar da aka toshe zuwa tashar ethernet, kuma tashar uwar garken ita ce 3333.
Ba za ku iya aikawa zuwa uwar garken fiye da 65MB na bayanai ba.
Ana amfani da haruffan (), +, “”, da… a cikin wannan takaddun don sauƙaƙe fahimta, kuma ba sa cikin umarnin.
Kowane umarni da aka aika ko karɓa yana ƙarewa da “!”, ana amfani da shi azaman mai ƙarewa. Idan ka aika umarnin da ba a gane ba, uwar garken zai dawo "An aika umarnin da ba a sani ba!"

SAMU MATSAYIN RAYA
Umurni: GET_STATUS!

Bayani: Da wannan umarni zaka sami matsayin Unit da ayyukanta. Kowane katangar bayanan da ke ɗauke da matsayi na raka'a ko bayanan aiki, yana ƙarewa da halayen hexadecimal 0x17.

Koma bayanai:
(Matsalar MATSAYI)
MATSAYI naúrar: ba yanke/yanke/dakata ba + 0x17 (ƙarshen bayanin matsayin Unit) +

(JOB1)
N:(lambar aiki),STJ:( matsayin aiki),FD: (lambar files kammala), FTD: (lambar files yi),C: (abokin ciniki),TS: (lokacin fara aiki) +
; (ƙarshen bayanan JOB1) +

(FILE_AIKI 1)
F:(file suna), ST:(file matsayin "ba yanke/yanke/dakata/ dakatarwa/kammala"), M: (m aterial), CT: (yanke gwaje-gwajen yi), LD: (tsari yi), LTD: (tsari don yi), TL: (jimlar na Labels yi), TE: (lokacin ya wuce cikin dakika), MS: (gudun kayan aiki "xm/min/fara da tsayawa/sheets"), FS:(file fara a) +; (karshen FILE_Data) +
(FILE_B NA AYUBA1)
F:(file suna),… + ; (karshen FILE_B data) + 0x17 (karshen JOB1 block of data) +

(JOB2)
N: (lambar aiki),… + ; (ƙarshen bayanan JOB2) +

(FILE_C NA AYUBA2)
F:(file suna),… + ; (karshen FILE_C data) + 0x17 (ƙarshen JOB2 block of data) + ! (terminator)

Example na bayanan da aka dawo (ana nuna ciyarwar layi da dawowar karusar a nan, kuma ba a dawo da su ba):
(idan bayan lambar umarni babu bayanai, yana nufin cewa ba a saita wannan ƙimar ba tukuna. Ga misaliampidan bayan TS: babu wani abu, yana nufin cewa ba a fara aikin ba tukuna)

Matsayin naúrar: yanke (0x17)
N:001,STJ:yanke,FD:0,FTD:2,C:Customer 1,TS:dd-mm-aaaa H:mm;
F:file1,ST: yankan,M: lakabin takarda,CT:3,LD:100,LTD:2000,TL:300,TE:3500,MS:16 m/min,FS:dd-mm-aaaa H:mm; F:file2,ST:not cutting,M:paper label,CT:0,LD:0,LTD:3000,TL:0,TE:,MS:,FS:;(0x17)
N:002,STJ:ba yanka,FD:0,FTD:1,C:Customer 2,TS::;
F:file3,ST:not cutting,M:plastic label,CT:0,LD:0,LTD:2000,TL:0,TE:,MS:,FS:;(0x17)!

SANARWA TA KARSHEN AYUBA

Bayani:
Duk lokacin da aikin ya ƙare (don haka duk lokacin da shimfidar wuri don yi ga kowane file an kammala) uwar garken zai cire shi daga jerin gwano, kuma ya ba kowane mai amfani da aka haɗa rahoton. Software na Unit kuma yana adana rahoton duk wani aiki da aka kammala a cikin C: Manajan Cutting Report Report Queue jobs complete report.txt

Koma bayanai:
(JOB1)
N:(lambar aiki),STJ:( matsayin aiki),FD: (lambar files kammala), FTD: (lambar files yi),C: (abokin ciniki),TS: (lokacin fara aiki) + ,TF: (lokacin ƙarshen aiki) + ; (ƙarshen bayanan JOB1) +

(FILE_AIKI 1)
F:(file suna), ST:(file matsayin "ba yanke/yanke/dakata/ dakatarwa ba"), M: (kayan abu), CT: (c ut tests done), LD: (tsarin da aka yi), LTD: (tsarin da za a yi), TL: (jimlar alamun da aka yi. TE: (lokacin ya wuce cikin dakika), MS: (gudun abu "xm/min/fara da tsayawa/sheets"), FS:(file fara a) +; (karshen FILE_Data) +

(FILE_B NA AYUBA1)
F:(file suna),… + ; (karshen FILE_B data) +! (terminator)

Example na bayanan da aka dawo (ana nuna ciyarwar layi da dawowar karusar a nan, kuma ba a dawo da su ba):
N:001,STJ: kammala,FD:2,FTD:2,C:Customer 1,TS:dd-mm-aaaa H:mm,TF:dd-mm-aaaa H:mm;
F:file1,ST:completed,M:paper label,CT:2,LD:1000,LTD:1000,TL:3000,TE:2000,MS:16 m/min,FS:dd-mm-aaaa H:mm;
F:file2,ST: kammala,M: lakabin takarda,CT:2,LD:2000,LTD:2000,TL:8000,TE:3000,MS:fara da tsayawa,FS:dd-mm-aaaa H:mm;

SANAR DA AYYUKAN AIKI:

Umurni:
APPEND:N: (aiki code),C: (abokin ciniki);(FILE_A->) F:(file suna),M: (kayan abu), LTD: (tsari don yin (lamba ko "u" don Unlimited));(FILE_B->) F:(file suna),…;!.

Bayani:
Wannan umarnin yana ba ku damar ƙara sabon aiki zuwa jerin gwano.
DOLE BA KA AMFANA FILES DA SUNAN GUDA A CIKIN AYYUKAN. GA EXAMPLE BA ZA KA IYA KARA FILE_A ZUWA GUDA BIYU AYYUKAN N:001 DA N:002, KO KA KARA SAU BIYU A AIKI DAYA.

Exampna aika data:
HAKAN: N:001,C: Abokin ciniki 1;F:FILE_A,M:lambar takarda,LTD:300;F:FILE_B,M:Lambar filastik,LTD:200;!

Koma bayanai:
Idan tsarin tsarin umarni daidai ya dawo "Aikin da aka haɗa zuwa layi tare da nasara!". In ba haka ba za ta dawo "Aikace-aikacen buƙatun APPEND ba daidai ba ne, ya kamata ya zama "APPEND:N: job_code,C:customer;F:file_1, M: abu, LTD: layouts_to_do; F:file_2,M: material, LTD: layouts_to_do;…(terminator)!”

CIRE AIKI DAGA jerin gwano:

Umurni:
CIRE: N: (lambar aiki/duk);F:(file suna 1,file suna 2/duk)!

Bayani:
Wannan umarni yana ba ku damar cire ayyuka ko files daga jerin gwano.

Exampna aika data:
(Cire DUK AYYUKAN) CIRE: N: duk!
(Cire DUKA FILES OF A AYUBA) CIRE: N:001;F: duka!
(Cire TAUSAMMAN FILES) CIRE:N:001;F:FILE_A,FILE_B!

Koma bayanai:
Idan tsarin tsarin umarni daidai ya dawo"Files cire tare da nasara!".
In ba haka ba zai dawo "Cire bai yi daidai ba: (jerin kurakurai)!".

GIDAN AYYUKAN QUEUE

Bayani:
Duk lokacin da aka haɗa aiki a kan layi, ana nuna shi a wannan taga.
Mai amfani zai iya ganin kowane aiki wanda files suna buƙatar buɗewa, odar su, nau'in kayan aiki, shimfidar wurare da za a yi.
Mai amfani yana iya zaɓar sharewa files daga jerin gwano, ta danna gunkin kwandon shara a hannun dama.
A duk lokacin da aikin ya kammala saitin da za a yi wa kowane file, za a yi la'akari da aikin ya ƙare kuma an cire shi daga taga.