HAMATON PHT280 TPMS Sensor

Umarnin Shigar Sensor na TPMS

Ƙayyadaddun bayanai

• Maƙerin: Hamaton Automotive Technology Co., Ltd
• Valve Stem Styles: Snap-In and Clamp-In
• Recommended Valve Stem Style: Same as OEM for safety on speed rated and high pressure applications
• Yarda: Dokokin FCC Sashe na 15

UMARNIN TSIRA

Muhimmiyar Bayani: Kafin shigar da firikwensin, da fatan za a karanta waɗannan umarnin a hankali kuma ku bi, ƙa'idodin shigarwa/amfani da kyau.

Gargadi

• Shigar da TPMS don ƙwararru ne kawai. Karanta kuma bi duk umarni da gargaɗi kafin shigarwa.
• Improper installation may result in failure of the vehicle Tire Pressure Monitoring System sensor to operate as designed. Please refer to the Hamaton application guide or www.hamaton.com, and the information of the reprogramming process of TPMS of OEM. Hamaton Sensor assemblies are designed as replacement or maintenance parts for automotive and light truck vehicles that have an Original Equipment Manufacturers (OEM) factory installed TPMS system.

Tsanaki

• Hamaton Sensor assemblies are designed and manufactured to operate in a specific motor vehicle application. Please refer to the Sensor application guide or www.hamaton.com .for the specific vehicle application. Improper installation or incorrect use of sensor application may result in the failure of the proper operation of the TPMS system. Do not install the sensor assemblies in damaged wheels. The Sensor assemblies are designed and manufactured to operate in Original
• Equipment (OE) wheels and tires only. If Original Equipment (OE) tires and/or wheels are not used, the TPMS System and the low tire inflation warning threshold of the vehicle’s TPMS System may not function or may function incorrectly. If Non-Original Equipment (OE) also known as “Aftermarket” wheels and/or tires is installed, it is the responsibility of the owner to ensure that the TPMS system is working correctly. Failure to follow the installation instructions or the use of the improper TPMS sensors may result in the motor vehicles TPMS System failure causing property damage, personal injury or death.

Shigarwa

Snap-In da Clamp-A cikin bawul mai tushe suna canzawa, duk da haka, mu (Hamaton) suna ba da shawarar yin amfani da salon sutura iri ɗaya kamar OEM don dalilai na aminci akan ƙimar saurin sauri da aikace-aikacen matsa lamba.

BAYANIN AMFANI

Clamp-a cikin umarnin

1. Kafin shigar da firikwensin, tabbatar da cewa ramin ramin yana da tsabta kuma ba shi da datti da tarkace don tabbatar da hatimin da ya dace.
2. Cire hular bawul da kwaya daga taron firikwensin.
3. Saka bawul mai tushe/haɗin firikwensin ta ramin ramin daga ciki na dabaran. Ya kamata a zaunar da robar grommet a cikin ramin bawul na bakin.
4. Rike taron firikwensin a wurin, hannu ya matse goro har sai ya yi laushi.
5. A ɗora haɗe-haɗe tare da haɗaɗɗen bawul/haɗin firikwensin zuwa dabaran ta hanyar ƙarfafa goro 12mm zuwa 44in-lbs (5N-m) ta amfani da maƙarƙashiyar maƙarƙashiya mai in-lbs.
6. Yanzu an shirya dabaran don hawan taya.

Umarnin karyewa 

1. Kafin shigar da firikwensin, tabbatar da cewa ramin ramin yana da tsabta kuma ba shi da datti da tarkace don tabbatar da hatimin da ya dace.
2. Aiwatar da lube mai hawa zuwa robar karye-cikin bawul din.
3. Daidaita taron firikwensin tare da ramin ramin kuma haɗa daidaitaccen kayan aikin shigarwa na bawul.
4. Cire tushen bawul kai tsaye zuwa cikin ramin bakin har sai tushe ya zauna daidai.
5. Yanzu an shirya dabaran don hawan taya.

FCC Tsanaki

Wannan na'urar ta bi sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma
2. Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.

Duk wani canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.

Bae: An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class B, bisa ga sashi na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga kutsawa mai cutarwa a cikin shigarwar mazaunin. Wannan kayan aiki yana haifar da amfani kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba a shigar da shi ba kuma aka yi amfani da shi daidai da umarnin, na iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:

• Sake daidaitawa ko matsar da eriya mai karɓa.
• Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
• Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
• Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

Wannan kayan aikin ya dace da iyakokin fiddawa na FCC da aka tsara don yanayin da ba a sarrafa shi ba. Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa 20cm tsakanin radiyo & jikin ku.

• Abubuwan da aka bayar na HAMATON AUTOMOTIVE TECHNOLOGY CO., LTD
• Ƙara: No.12 East Zhenxing Road, Linping Yuhang, Hangzhou, Zhejiang, China.

FAQ

Can I use the Clamp-In valve stem instead of the Snap-In?

Snap-In da Clamp-In valve stems are interchangeable, but it is recommended to use the same valve stem style as the OEM for safety reasons on speed rated and high-pressure applications.

What should I do if I encounter interference issues with the TPMS sensor?

If you experience interference, ensure that the sensor is properly installed according to the provided guidelines. Contact customer support if issues persist.

Takardu / Albarkatu

HAMATON PHT280 TPMS Sensor [pdf] Jagoran Shigarwa PHT280, 2AFH7PHT280, PHT280 TPMS Sensor, PHT280, TPMS Sensor, Sensor

Magana

• Manual mai amfani