Interface BSC2 Aunawa AmpJagorar Mai Amfani

Interface BSC2 Aunawa Amplififi

Ƙayyadaddun samfur

• Samfura: Saukewa: BSC2
• Akwai Nau'ukan:
  • BSC2-1: 10mV/V
  • BSC2-2: 10mV/V 10V
  • BSC2-3: 10mV/V 4.2V
  • BSC2-4: 10mV/V RPM
  • BSC2-5: 10mV/V RPM/SubD15
• Tashoshi: 2
• Masu haɗawa: Biyu M12 5-Pole mata haši
• Shigar da Wuta: 4…20mA

Umarnin Amfani da samfur

• Don haɗa ma'auni, yi amfani da abubuwan haɗin M12 da aka bayar tare da aikin fil mai zuwa:
• Don kwata ko rabin gadoji, tabbatar da daidaitaccen tsari ta hanyar rufe gadoji mai siyarwa guda biyu don haɗa ƙarin resistors. Yi amfani da fasahar wayoyi uku don gadoji na nau'in nau'in waya.
• Don haɗa na'urori masu auna firikwensin potentiometric, bi waɗannan matakan:
• Haɗa firikwensin nisa mai ƙarfi tsakanin +Mu, –Mu, da AUX.
• Ƙaddamar da firikwensin tare da +Mu kuma -Mu a 4.2V.
• Ya kamata kewayon shigarwa ya kasance tsakanin 0…. 4.2V.

FAQ

• Q: Zan iya amfani da ma'aunin BSC2? ampmai kunnawa don masu ƙara ƙara?
• A: Ee, ana samun BSC2 don haɗa maɓallan ƙarawa tare da sauran nau'ikan firikwensin.
• Q: Tashoshi nawa BSC2 ke da su?
• A: BSC2 yana da tashoshi 2 don haɗin firikwensin.
• Q: Menene kewayon shigar da wutar lantarki na BSC2?
• A: BSC2 tana goyan bayan shigar da wutar lantarki na 4…20mA.

Matsala-Aunawa ampFarashin BSC2

• Ana yin ƙarfi ta hanyar tashar USB
• Samp10 kHz
• Adadin bayanai 1…1000 Hz
• straingage kwata, rabi, cikakken gadoji
• Gina-in gada gasar 350 Ohm
• Tsari na zaɓi don masu juyawa
• Cikakken tallafin software
• Warewa Galvanic zuwa tashar USB
• Sigar zaɓi don haɗa na'urori masu auna firikwensin firikwensin ƙarfi tare da maƙallan ƙara yana samuwa

Bayani

• Wannan aunawa ampLifier don na'urori masu auna firikwensin waya yana sanye da kebul na USB, yayin da ake ba da wutar lantarki ta tashar USB a bayan ma'aunin. ampmai sanyaya wuta.
• Aunawa ampHakanan ana samun lifier a sigar tashoshi 2 (BSC2).
• Aunawa tashoshi biyu amplifier yana fasalta haɗin firikwensin ta hanyar masu haɗin toshe zagaye biyu.
• Abubuwan da aka fice sun haɗa da manyan sampMatsakaicin ƙimar 10kHz da babban ƙudurin 16-bit, kazalika da ƙayyadaddun umarni na musamman da aka bayar don daidaita ma'aunin. ampmai kunnawa ta hanyar lambobin sarrafawa ta ASCII ko Windows DLL.
• Wannan aunawa ampHakanan za'a iya daidaita wutar lantarki ta hanyar gadoji na solder lokacin nazarin gadoji kwata-kwata (misali 350 ohms) ko don samar da wutar lantarki na ± 10 V.

Hakanan za'a iya ba da ita ta zaɓin don haɗa masu canza matsuguni masu ƙarfi ko don shigar da wutar lantarki na 4…20mA, haka kuma don masu ƙarawa.

Akwai samfura don yin oda

• Wasu samfura da ake samu akan buƙata;

Masu haɗawa

• Aikin fil (cikakken-, rabi, gadoji kwata, firikwensin nesa)

• A cikin tashoshi 2-tashar BSC2 tare da mahaɗin filogi mai zagaye, an sanya garkuwar a kan mahallin filogi.
• A madadin, ana sanya garkuwar akan PIN 2 na mahaɗin filogi mai zagaye

Jadawalin haɗin gwiwa don gadoji kwata da gadoji

Da fatan za a kula: Lokacin haɗa kwata ko rabin gadoji, aunawa ampDole ne a daidaita madaidaicin lifi. Rufe gadoji mai siyarwa guda biyu yana haɗa ƙarin ƙarin resistors uku.

Ana haɗa gadoji na ma'auni-kwata ta hanyar amfani da fasahar waya guda uku, wanda ke rage tasirin kebul ɗin samarwa akan ma'aunin sifili, kuma ya rage madaidaicin ma'aunin sifili.

• Tsarin haɗin kai don na'urori masu nisa masu ƙarfi
• Farashin BSC2 ampana samun lifiers a cikin ƙira don haɗi zuwa na'urori masu nisa na potentiometric (Potentiometer madaidaiciya ko mai karɓar hanya), wanda ya haɗa da ma'aunin firikwensin nesa da ake haɗa shi da shigarwar "Aux" na ma'aunin. ampmai sanyaya wuta.
• Ana amfani da firikwensin nesa ta hanyar samar da wutar lantarki na firikwensin +Us da -Us.

Aiki na ƙarshe

• Haɗin na'urori masu auna firikwensin ± 10 Volt

• Aiki na ƙarshe don shigarwar yanzu

Ma'aunin sauri
Farashin BSC2 ampana samun lifiers a cikin samfura masu iya auna gudu. Wannan ya haɗa da haɗin maɓallin kewayawa azaman firikwensin firikwensin, wanda aka kunna ta hanyar maganadisu ɗaya, biyu, huɗu ko takwas a kowane juyin juya hali. Matsakaicin matakin da ake iya gano bugun ma'aunin saurin shine sauyi a cikin yawan kwararar maganadisu daga 20mT zuwa 4mT, ta yadda igiyar kudanci ta Magnetic dole ne ta kasance tana fuskantar madaidaicin saman falon.
Dole ne a saita naúrar zuwa rpm kuma an saita abin da aka fitar na ƙimar ma'aunin zuwa tsarin rubutu ta tsohuwa. An saita sikelin tsoho zuwa 20000 kuma ba za a iya canza shi ba. Adadin maganadiso da ke haifar da bugun jini akan firikwensin zauren za a iya daidaita su ta amfani da gsvterm.exe. Don wannan dalili, da fatan za a yi amfani da zaɓin menu "Saitunan Musamman" a cikin mahallin shirin a shafi na 2.

Haɗin maɓallin HAL501

• Maimakon sauya zauren HAL501, ana iya haɗa sauran masu watsawa tare da amfani da wutar lantarki a ƙarƙashin 5V, 5mA da siginar fitarwa tare da TTL Pegel.
• Yin amfani da maganadisu na sanda NdFeB 20mmx10mmx4mm yana ba da damar aiki mai nisa har zuwa 10mm tsakanin canjin zauren da maganadisu.

Haɗin na'urorin bugun bugun jini guda biyu
Farashin BSC2 ampana samun lifiers a cikin samfura masu iya auna kusurwa/gudu ko nisan tafiya. Don wannan dalili, an haɗa janareta mai haɓaka bugun jini, wanda ke fitar da siginonin murabba'i masu canzawa lokaci-lokaci a cikin yanayin canjin nisan tafiya ko kusurwar juyawa ta 90° (haɗin A da B).

Haɗin firikwensin ƙarfi

• Aunawa tashoshi biyu ampLifier BSC2-5 10mV/V/RPM/Sub-D15 ana bada shawarar don aiki da firikwensin karfin wuta.
• Layukan "A" zuwa "M" na firikwensin karfin juyi suna haɗe zuwa soket na SubD-15 na ma'aunin. ampmai sanyaya wuta.

Kanfigareshan

• An saita mitar bayanan zuwa tashar jiragen ruwa "A". Port "B" yana watsa aiki tare tare da mitar bayanai na tashar jiragen ruwa "A".
• Tashar “B” tana aiki azaman ƙidayar ƙara kuma ba a sake saita ta kai tsaye zuwa sifili ba. Bayan ya kai adadi 65535°, sai ya koma sifili.
• Ana iya amfani da umarnin "SetZero" don sake saita ma'aunin zuwa 0 a kowane lokaci.

Bayanan fasaha

Taqaitaccen bayani

vE (daga ƙimar ƙarshe), vS (daga ƙimar manufa)
Matsakaicin siginar da ake iya samu/rabo amo ya dogara da yanayin yanayi (tsawon kebul, garkuwa), ƙimar bayanan da aka saita da kuma tacewar FIR wanda za'a iya amfani da zaɓin zaɓi. Hoton da ke ƙasa yana nuna ƙuduri

Daidaita ma'auni amplififi

• Yin amfani da gada mai siyar a kan ƙasan platinum, aunawa ampza a iya saita lifier zuwa kewayon hanyoyin aiki. Za a iya cire sukurori biyu a gefen gaba don buɗe gidan. An rufe sukurori da baƙar murfin murfin.
• Aunawa amplifier ya haɗa da ƙari don gadoji kwata tare da 350 ohm kuma ana iya kunna wannan saitin ta amfani da gadoji mai siyarwa. Tare da tsarin "kwata gada / rabin gada", ana iya haɗa rabin gadoji daga 120 ohm.
• Ƙarin daidaitawa sun haɗa da voltage shigarwar + -10V, shigarwar yanzu 4…20mA, shigarwa don masu watsa potentiometer.
• Aiki na ƙarshe a kan ƙasan platinum

straingage cikakken gadoji

straingage kwata gadoji

Potentiometric transmitter, firikwensin motsi

Voltage shigar da -10V…+10V

Shigarwa na yanzu -20mA…+20mA

Nasiha ga kebul na USB

Canja na'urorin lantarki (kayan wutar lantarki na dakin gwaje-gwaje, samar da wutar lantarki, injuna, na'urorin dumama, fitilun neon) na iya haifar da rufewar kebul na kwamfuta ta kwamfuta. Idan akwai wata matsala, ya kamata a ba da kwamfutar ta hanyar mai keɓancewa ko ta hanyar lantarki daban.
Akwai hanyoyi da yawa don inganta amincin kebul na kebul na PC ko kwamfutar tafi-da-gidanka:

• Yi amfani da kebul na USB mai inganci tare da ferrite core,
• Rage adadin na'urorin USB da ake amfani da su, tunda gabaɗayan halin yanzu yana iyakance ga 500mA,
• Yi amfani da tashar USB mai aiki (mai sarrafa kanta),
• Yi amfani da kayan wutan lantarki tare da ƙasa.

Yin amfani da tashar USB mai aiki tare da samar da wutar lantarki yana taimakawa musamman don inganta amincin kebul na kebul.

Bayanan kula a kan karban bakin kofa

Karɓar bakin kofa

• Transformer zai yi rauni idan ƙimar iyaka ta wuce.
• Matsakaicin canjin halin yanzu shine 200mA.

Canji

Garanti

Duk samfuran kayan aiki daga Interface Inc., ('Interface') suna da garantin rashin lahani da aiki na tsawon (1) shekara guda daga ranar aikawa. Idan samfurin 'Interface' da ka siya ya bayyana yana da lahani a kayan aiki ko aiki ko ya gaza yayin amfani na yau da kullun a cikin lokacin, tuntuɓi Mai Rarraba ku, wanda zai taimaka muku wajen magance matsalar. Idan ya zama dole a mayar da samfurin zuwa 'Interface' da fatan za a haɗa da bayanin kula mai bayyana suna, kamfani, adireshi, lambar waya da cikakken bayanin matsalar. Hakanan, da fatan za a nuna idan gyara garanti ne. Mai aikawa yana da alhakin jigilar kaya, inshorar kaya da marufi da suka dace don hana karyewa a hanya. Garanti na 'Interface' baya aiki ga lahani sakamakon aikin mai siye kamar mummuna, mu'amala mara kyau, aiki a waje da iyakokin ƙira, gyara mara kyau ko gyara mara izini. Babu wasu garanti da aka bayyana ko bayyana. 'Interface' ta keɓance takamaiman garantin ciniki ko dacewa don takamaiman manufa. Magungunan da aka zayyana a sama su ne kawai magungunan mai siye. 'Interface' ba za ta kasance abin dogaro ga kai tsaye, kai tsaye, na musamman, na faruwa ba, ko lalacewa ta hanyar kwangila, azabtarwa ko wata ka'idar doka.
Duk wani gyare-gyaren da ake buƙata bayan lokacin garanti ya kamata a yi ta hanyar 'Interface' da aka yarda da ma'aikatan kawai.

TUNTUBE

• Interface Inc.
• 7418 Gabas Buttherus Drive, Scottsdale, Arizona 85260 Amurka
• Waya 480.948.5555