IOS-DOV INTERMATIC A cikin Mazaunan bangon PIR da Wutar Sensor Canjin Wuta

Bayanin samfur

Ƙayyadaddun bayanai

• Samfura: IOS-DOV
• Aiki: Wurin zama / Wurin Wuta Sensor Canja (2-IN-1)
• Fasaha: Sensors Infrared Passive
• Wurin Rufewa: Har zuwa 1200 sq.ft.
• Relay Nau'in: Sansanin sanda guda ɗaya
• Ya haɗa da: Sensor Level Hasken yanayi

Tambayoyin da ake yawan yi

• Q: Menene zan yi idan na'urar firikwensin ba ta gano motsi daidai ba?
  • A: Bincika duk wani cikas a cikin firikwensin view kamar manya-manyan abubuwa ko shingen fili kamar tagogin gilashi. Tabbatar da hawan da ya dace ba tare da fallasa ga tushen zafi kai tsaye ko zane ba.
• Q: Zan iya daidaita ji na firikwensin sauya?
  • A: Ana iya daidaita ma'aunin firikwensin firikwensin a kaikaice ta hanyar canza wurin hawa da kusurwa don inganta gano motsi.

Mahimman ƙima

• Shigar da Voltage: 120 VAC, 60Hz
• Tungsten (mai haske): 800 W
• Fluorescent / Ballast: 800 VA
• Resistive (mai zafi): 12 A
• Motoci: 1 / 4 HP
• Jinkirin Lokaci: 15 seconds - 30 Minti
• Matsayin Haske: 30 Lux - Hasken Rana
• Yanayin Aiki: 32° – 131°F/0° – 55°C
• Babu ƙaramin kaya da ake buƙata

GARGADI: Hadarin Wuta, Girgizar Wuta ko Rauni na Mutum

• Kashe wuta a na'urar kashe wutar lantarki ko fuse kuma gwada cewa wutar tana KASHE kafin wayoyi.
• Don shigar da/ko amfani da su daidai da lambobi da ƙa'idodi na lantarki masu dacewa.
• Idan ba ku da tabbacin kowane ɓangare na waɗannan umarnin, tuntuɓi ƙwararren ma'aikacin lantarki.
• Yi amfani da wannan na'urar kawai da jan ƙarfe ko waya mai lullube da tagulla.
• AMFANIN CIKI KAWAI

UMARNIN SHIGA

Bayani

• Na'urori masu auna firikwensin infrared suna aiki ta hanyar gano bambanci tsakanin zafi da ke fitowa daga jikin mutum a cikin motsi da sararin bayan gida.
• Maɓallin firikwensin zai iya kunna kaya kuma ya riƙe shi muddin firikwensin ya gano wurin zama. Bayan babu motsi da aka gano don tsayuwar lokacin da aka saita, lodin yana kashe ta atomatik. Maɓallin firikwensin yana da gudun ba da sanda guda ɗaya (daidai da sauyawar sandar sanda ɗaya), kuma ya haɗa da Sensor Level Light Ambient.

Wurin Rufewa:

An ƙayyade kewayon kewayon firikwensin firikwensin kuma an kwatanta shi a hoto na 1. Manya-manyan abubuwa da wasu shingen sarari kamar tagogin gilashi za su hana firikwensin view da kuma hana ganowa, yana sa hasken ya kashe duk da cewa har yanzu wani yana wurin da aka gano.

WURI/HAUWA

Tun da wannan na'urar tana amsa canje-canjen zafin jiki, ya kamata a kula yayin hawa na'urar. KADA KA hau kai tsaye sama da tushen zafi, a cikin wurin da zazzafan zafi ko sanyi za su busa kai tsaye akan firikwensin, ko kuma inda motsin da ba a yi niyya zai kasance a cikin filin firikwensin-of-view.

SHIGA

1. Cire canjin sandar sanda guda ɗaya ko shigarwar dimmer, idan an zartar.
2. Cire 3/4: (1.9 cm) na rufi daga kowane mai gudanarwa. Tabbatar cewa ƙarshen wayoyi madaidaiciya.
3. Haɗa wayoyi masu guba kamar yadda aka nuna a WIRING DIAGRAM (duba Hoto na 2): Baƙar jagora zuwa Layi (Hot), Jajayen jagora zuwa Wayar Load, Farar jagora zuwa Waya Tsaki, Koren jagora zuwa ƙasa.
4. Sanya wayoyi a hankali a cikin akwatin bango, haɗa maɓallin firikwensin zuwa akwatin.
5. Hana na'urar "TOP" sama.
6. Mayar da wutar lantarki a mai watsewar kewayawa ko fuse, jira minti daya.
7. Cire ƙaramin murfin murfin. (An kwatanta kamar Hoto na 3.)
8. Nemo ƙulli na daidaitawa akan kwamitin kulawa don yin gwaji. da gyare-gyare. (An kwatanta shi a hoto na 4.)
9. Sauya ƙaramin murfin murfin bayan gwaji da daidaitawa.
10. Haɗa farantin bango.

NOTE: Idan an bayar da murɗa a kan mai haɗin waya, yi amfani da don haɗa madubin samarwa ɗaya tare da gubar sarrafa na'urar 16 AWG guda ɗaya.

GYARA

Band Canja

Yanayin	Matsayi	Bayani	Maida martani ga maɓallin turawa
KASHE	HAGU	Ana buɗe zagaye na dindindin	Babu
OCC	Cibiyar	Yanayin zama: KASHE ta atomatik bayan saita lokaci ta atomatik.	Da hannu yana kunnawa / KASHE kaya.
VAC	DAMA	Yanayin Wuta: Manual ON kawai ta atomatik bayan saita lokaci	Da hannu yana kunnawa / KASHE kaya.

Kullin Jinkirin Lokaci

• Matsayi na asali: 15 seconds (Yanayin Gwaji)
• Daidaitacce: daga dakika 15 zuwa mintuna 30 (a gefen agogo)

Sensor Sensitivity Range Knob

• Matsayi na asali: Cibiyar a 65%
• Daidaitacce: 30% (Mataki na 1) zuwa 100% (Mataki na 4)

Lura: Juya gefen agogo don manyan ɗakuna. Juya kishiyar agogo don guje wa faɗakarwar karya a cikin ƙananan ɗakuna ko kusa da ƙofar kofa ko tushen zafi.

• Kiran Kiran Hasken Yanayin: Ana daidaita saitin hasken yanayi tare da bugun kiran Hasken Ambient (koma zuwa adadi 4). Juya bugun kiran haske gabaɗaya akan agogo (CW), fitilu koyaushe suna kunnawa, lokacin da aka gano motsi. Duk sauran saitunan zasu sa fitilun su kunna kawai lokacin da matakin hasken ya yi ƙasa da saitin.
• Matsayi na asali: Hasken Rana (100% a matsayi na 4)
• Daidaitacce: Hasken Rana zuwa 39 Lux (Kwafi na agogo)

AIKI

An tsara Sensor Canjin da kansa don ko dai Yanayin zama ko Yanayin Wuta kamar yadda ake magana da Matsayin Canjawar Band a ƙarƙashin murfin panel. Yanayin sarari kuma ana san shi da “Manual On Occupancy Mode”. Ta hanyar tura Cover Panel Cover, za a iya kunna lodin a ƙarƙashin yanayin OCC ko VAC. (An kwatanta kamar hoto na 5)

Kunna lodi a ƙarƙashin Yanayin zama

• Load ɗin don zama atomatik ON da zarar an gano wurin zama.

Kunna lodi a ƙarƙashin Yanayin Wuta

• Dole ne a tura Maɓallin ON/KASHE da hannu don kunna Load ɗin.

Kashe lodi ta atomatik

• Ƙarƙashin kowane yanayi, Sensor yana riƙe Load ɗin Kunnawa har sai ba a gano motsi ko tsayuwar lokacin da aka saita ba, lodi (s) su kasance A kashe ta atomatik.
• A ƙarƙashin Yanayin VAC, Load ɗin na iya kunna ta atomatik idan an gano motsi a cikin daƙiƙa 1st 30.

Kashe Load da Manual

• Ta Maɓallin ON/KASHE da Manual, ana iya kashe Load ɗin a ƙarƙashin yanayin OCC ko VAC.
• A ƙarƙashin Yanayin OCC, Load ɗin ba zai iya kunna ta atomatik mintuna 5 ba bayan an gano motsi na ƙarshe.

CUTAR MATSALAR

Don aikin da ya dace, Sensor Switch dole ne ya cinye wuta daga zafi da tsaka tsaki. Don haka, ana buƙatar Wayoyin Neutral masu aminci.

Gudun farko

• Canjin Sensor yana buƙatar gudu na farko a cikin minti ɗaya. Yayin gudu na farko, ana iya kunna lodin da kashe sau da yawa.
• An saita kullin jinkirin lokaci zuwa tsohowar daƙiƙa 15, kar a daidaita shi har sai an gama aikin farko kuma an tabbatar da aikin da ya dace.

lodin yana walƙiya akai-akai

1. Yana iya ɗaukar har zuwa minti ɗaya don gudu na farko.
2. Bincika hanyoyin haɗin waya, musamman ma Neutral Wire.

Load ɗin baya kunna ba tare da walƙiya na LED ko walƙiya na LED ba tare da la'akari da motsi ba

1. Maɓallin Kunnawa/Kashe Manual, idan kaya ya kunna; tabbatar da cewa kewayon Sensitive yana kan sama. Idan Load ɗin bai kunna ba, je zuwa Mataki na 2.
2. Duba hanyoyin haɗin waya, musamman Hot line da Neutral waya.

Load ɗin baya kunna yayin da LED ke walƙiya kuma ana gano motsi

1. Bincika don ganin ko An kunna matakin Hasken Ambient ta hanyar rufe ruwan tabarau da hannu.
2. Maɓallin Kunnawa/Kashe Manual, idan kaya ya kunna; tabbatar da cewa Range Sensitivity yana kan sama. Idan Load ɗin bai Kunna ba, je zuwa Mataki na 3.
3. Bincika hanyoyin haɗin waya, musamman Hot Line da Waya tsaka tsaki.

Load ɗin baya kashewa

1. Ana iya samun jinkiri har zuwa minti 30 bayan an gano motsi na ƙarshe. Don tabbatar da aikin da ya dace, kunna Kullin Jinkirin Lokaci zuwa 15s (Yanayin Gwaji), tabbatar da cewa babu motsi (babu walƙiya na LED), Load ɗin yakamata ya kashe a cikin daƙiƙa 15.
2. Bincika idan akwai wasu mahimman hanyoyin zafi da aka saka a cikin ƙafa shida (mita biyu) waɗanda zasu iya haifar da gano ƙarya kamar, babban wat.tage kwan fitila, mai ɗaukar hoto ko na'urar HVAC.
3. Bincika hanyoyin haɗin waya, musamman ma waya mai tsaka-tsaki zuwa maɓallin firikwensin.

Load ɗin yana kunna ba da niyya ba

1. Canja daga OCC zuwa yanayin VAC.
2. Matsar da ruwan tabarau na Sensor Switch don kawar da yankin da ba'a so.
3. Juya ƙwanƙwan Matsayin Hankali akan agogon agogo baya don gujewa faɗakarwar karya a cikin ƙananan ɗakuna ko kusa da ƙofar.

NOTE: Idan matsaloli suka ci gaba, tuntuɓi ƙwararren ma'aikacin lantarki.

GARANTI MAI KYAU

Ana samun sabis na garanti ta ko dai (a) mayar da samfur ga dillalin da aka siyo naúrar daga gare shi ko (b) kammala da'awar garanti akan layi a www.intermatic.com. An yi wannan garantin ta: Intermatic Incorporated, 1950 Innovation Way, Suite 300, Libertyville, IL 60048. Don ƙarin samfur ko bayanin garanti je zuwa: http://www.Intermatic.com ko kira 815-675-7000.

Takardu / Albarkatu

IOS-DOV INTERMATIC A cikin Mazaunan bangon PIR da Wutar Sensor Canjin Wuta [pdf] Jagoran Shigarwa IOS-DOV, IOS-DOV A cikin Mazaunan bangon PIR da Wutar Sensor Canjin Wuta, A cikin bangon PIR Mazauna da Canjin Sensor Canjin, Matsayin PIR da Maɓallin Sensor Canjin, Matsakaicin Matsayi da Wutar Sensor Canjin, Maɓallin Sensor Canjin, Canjin Sensor Canjin, Canjin Sensor Canjin.

Magana

• Manual mai amfani