Wurin shiga JUNIPER AP45
AP45 Jagoran Shigar Hardware
Ƙarsheview
Mist AP45 ya ƙunshi rediyon IEEE 802.11ax guda huɗu waɗanda ke isar da 4 × 4 MIMO tare da rafukan sararin samaniya guda huɗu yayin aiki a cikin yanayin mai amfani da yawa (MU) ko mai amfani guda ɗaya (SU). AP45 yana da ikon yin aiki a lokaci ɗaya a cikin rukunin 6GHz, band ɗin 5GHz, da kuma band ɗin 2.4GHz tare da keɓantaccen rediyo mai duba tri-band.
I/O tashoshin jiragen ruwa
| Sake saiti | Sake saitin zuwa tsoffin saitunan masana'anta |
| Eth0+PoE-in | 100/1000/2500/5000BASE-T RJ45 dubawa wanda ke goyan bayan 802.3at/802.3bt PoE PD |
| Eth1+PSE-fita | 10/100/1000BASE-T RJ45 dubawa + 802.3af PSE (idan PoE-in shine 802.3bt) |
| USB | USB2.0 goyon bayan dubawa |
Abubuwan da aka makala AP45E Antenna
- Mataki na 1
Cire murfin tashar jiragen ruwa ta eriya ta amfani da bit tsaro T8. - Mataki na 2
Haɗa eriya zuwa AP - Mataki na 3
Lanƙwasa shafin karya a kan murfi. - Mataki na 4
Haɗa murfin tashar tashar eriya akan AP ta amfani da bit tsaro T8 - Mataki na 5
Sanya ɗigon digo na abubuwan da aka bayar akan sukurun murfin tashar jiragen ruwa 6-pin - Mataki na 6
Sanya alamun lexan da aka tanadar akan ƙusoshin murfin tashar jiragen ruwa tare da manne
Saukewa: AP45
Zaɓuɓɓukan akwatin hawa APBR-U
Ramuka : Zaɓuɓɓukan hawa
- US Single gang, 4 inch zagaye, 3.5 inch zagaye
- Ƙungiya Biyu na Amurka, Dutsen bango/rufi
- US 4 inch murabba'in
- Akwatin mahadar EU
A cikin shigarwar dutsen bango, da fatan za a yi amfani da sukurori waɗanda ke da 1/4in. (6.3mm) diamita shugaban da tsawon akalla 2 in. (50.8mm). APBR-U wanda ke cikin akwatin AP45(E) ya ƙunshi saita dunƙule da ƙugiya mai ido.
Hauwa zuwa 9/16 inch ko 15/16 inch T-bar
- Mataki na 1.
Dutsen APBR-U zuwa t-bar - Mataki na 2.
Juya APBR-U don kulle zuwa mashaya - Mataki na 3.
Zamar da AP tare da kusoshi na kafada akan APBR-U har sai an kulle kulle
Ƙungiyar ƙungiya ɗaya ta Amurka, 3.5 ko 4 inch junction junction box
- Mataki na 1
Dutsen APBR-U zuwa akwatin ta amfani da sukurori biyu da ramukan #1. Tabbatar cewa kebul na Ethernet ya tsawaita madaidaicin. - Mataki 2 Zamar da AP ɗin tare da sukurori na kafada akan APBR-U har sai an kulle kulle
Akwatin junction na ƙungiyoyi biyu na Amurka
- Mataki na 1
Dutsen APBR-U zuwa akwatin ta amfani da sukurori biyu da ramukan #2. Tabbatar cewa kebul na Ethernet ya shimfiɗa ta cikin madaidaicin. - Mataki na 2
Zamar da AP tare da kusoshi na kafada akan APBR-U har sai an kulle kulle
Akwatin junction murabba'in inch 4 inch
- Mataki na 1
Dutsen APBR-U zuwa akwatin ta amfani da sukurori biyu da ramukan #3. Tabbatar cewa kebul na Ethernet ya shimfiɗa ta cikin madaidaicin. - Mataki na 2
Zamar da AP tare da kusoshi na kafada akan APBR-U har sai an kulle kulle
Akwatin mahadar EU
- Mataki na 1
Dutsen APBR-U zuwa akwatin ta amfani da sukurori biyu da ramukan #4. Tabbatar cewa kebul na Ethernet ya tsawaita madaidaicin. - Mataki 2 Zamar da AP ɗin tare da sukurori na kafada akan APBR-U har sai an kulle kulle
Recessed 15/16 inch T-bar
- Mataki na 1
Dutsen APBR-ADP-RT15 zuwa t -bar - Mataki na 2
Dutsen APBR-U zuwa APBR-ADP-RT15. Juya APBR-U don kulle zuwa APBRADP-RT15 - Mataki na 3
Zamar da AP tare da kusoshi na kafada akan APBR-U har sai an kulle kulle
Recessed 9/16 inch T-bar ko tashar dogo
- Mataki na 1
Dutsen APBR-ADP-CR9 zuwa t-bar - Mataki na 2
Dutsen APBR-U zuwa APBR-ADP-CR9. Juya APBR-U don kulle zuwa APBRADP- CR9 - Mataki na 3
Zamar da AP tare da kusoshi na kafada akan APBR-U har sai an kulle kulle
1.5 inch T-bar
-
Mataki na 1Dutsen APBR-ADP-WSlS zuwa t-bar
-
Mataki na 2Dutsen APBR-U zuwa APBR-ADP-WSlS. Juya APBR-U don kulle zuwa APBR-ADP-WSlS
-
Mataki na 3Zamar da AP tare da screws a kan APBR-U har sai an kulle kulle
Adaftar sanda mai zare (1/2″, 5/8″, ko M 16)
- Mataki na 1
Sanya APBR-ADP-T12 zuwa APBR-U. Juyawa don kulle. - Mataki na 2
Aminta da APBR-ADP-T12 zuwa APBR-U tare da dunƙule da aka bayar - Mataki na 3
Shigar da taron madaidaicin zuwa sandar zaren 1/2 inci kuma amintacce tare da samar da wanki da goro. - Mataki na 4
Zamar da AP tare da sukurori na kafada akan APBR-U har sai an kulle kulle.
Adaftan sanda mai zaren yana manne da sanda wanda shine ko dai 1/2″-13, 5/8”-11, ko M16-2.
Ƙididdiga na Fasaha
| Siffar | Bayani |
| Zaɓuɓɓukan wuta | 802.3at/802.3bt PoE |
| Girma | 230mm x 230mm x 50mm (9.06in x 9.06in x 1.97in) |
| Nauyi | AP45: 1.34 kg (2.95 lbs) AP45E: 1.30 kg (2.86 lbs) |
| Yanayin aiki | AP45: 0° zuwa 40°C AP45E: -10° zuwa 50°C |
| Yanayin aiki | 10% zuwa 90% matsakaicin zafi na dangi, mara taurin kai |
| Tsayin aiki | 3,048m (10,000ft) |
| Amfani da lantarki | FCC Kashi na 15 Darasi na B |
|
I/O |
1 - 100/1000/2500/5000BASE-T auto-hannun RJ-45 tare da PoE 1 - 10/100/1000BASE-T auto-hannu RJ-45 USB2.0 |
|
RF |
2.4GHz ko 5GHz – 4×4:4SS 802.11ax MU-MIMO & SU-MIMO 5GHz – 4×4:4SS 802.11ax MU-MIMO & SU-MIMO 6GHz – 4×4: 4SS 802.11ax MU-MIMO & SU-MIMO 2.4GHz / 5GHz / 6GHz rediyo na duban ra'ayi 2.4GHz BLE tare da Tsararren Antenna mai Dynamic |
|
Matsakaicin ƙimar PHY |
Jimlar madaidaicin ƙimar PHY - 9600 Mbps 6GHz - 4800Mbps 5GHz - 2400Mbps 2.4GHz ko 5GHz - 1148Mbps ko 2400Mbps |
| Manuniya | Matsayin launi mai yawa LED |
| Matsayin aminci | UL 62368-1 CAN/CSA-C22.2 Lamba 62368-1-14 UL 2043 ICES-003:2020 Fitowa ta 7, Class B (Kanada) |
Ya dace don amfani a sararin samaniyar muhalli daidai da Sashe na 300-22(C) na National Electrical Code, da Sashe na 2-128, 12-010(3), da 12-100 na Kundin Lantarki na Kanada, Sashe na 1, CSA C22.1.
Bayanin Garanti
Iyalin AP45 na wuraren samun dama sun zo tare da iyakataccen garanti na rayuwa.
Bayanin oda
Abubuwan Dama
| AP45-US | 802.11ax 6E 4+4+4 - Eriya na ciki don yankin Dokokin Amurka |
| AP45E-US | 802.11ax 6E 4+4+4 - Eriya na waje don yankin Dokokin Amurka |
| Saukewa: AP45-WW | 802.11ax 6E 4+4+4 - Antenna na ciki don yankin WW Regulatory |
| Saukewa: AP45E-WW | 802.11ax 6E 4+4+4 - Eriya na waje don yankin WW Regulatory |
Maƙallan hawa
| APBR-U | Bangaren AP na Universal don hawan T-Rail da Drywall don wuraren shiga cikin gida |
| APBR-ADP-T58 | Adafta don 5/8-inch threaded sanda bracket |
| APBR-ADP-M16 | Adafta don 16mm threaded sanda sashi |
| APBR-ADP-T12 | Adafta don 1/2-inch threaded sanda bracket |
| APBR-ADP-CR9 | Adafta don tashar dogo da recessed 9/16" t-rail |
| APBR-ADP-RT15 | Adafta don t-dogo mai tsayi 15/16 inch |
| APBR-ADP-WS15 | Adafta don t-dogo mai tsayi 1.5 inch recessed |
Zaɓuɓɓukan Samar da Wuta
802.3at ko 802.3bt PoE ikon
Bayanin Yarda da Ka'ida:
Dole ne a shigar da wannan samfurin da duk kayan aikin haɗin gwiwa a cikin gida a cikin gini ɗaya, gami da haɗin haɗin LAN masu alaƙa kamar yadda 802.3at Standard ya ayyana. Ayyuka a cikin rukunin 5.15GHz – 5.35GHz an iyakance su zuwa amfani cikin gida kawai. Idan kuna buƙatar ƙarin taimako tare da siyan tushen wutar lantarki, tuntuɓi Juniper Networks, Inc.
Bukatun FCC don Aiki a cikin Amurka ta Amurka:
FCC Sashe na 15.247, 15.407, 15.107, da 15.109
Jagoran FCC don Bayyanar Mutum
Wannan kayan aikin ya dace da iyakokin fiddawa na FCC da aka tsara don yanayin da ba a sarrafa shi ba. Ya kamata a shigar da wannan kayan aikin tare da mafi ƙarancin nisa tsakanin radiyo & jikin ku; AP45 - 50cm da AP45E - 59cm.
Wannan na'urar ta bi Sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:
- Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma
- Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.
An gwada wannan kayan aikin kuma an same shi don yin aiki da iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga kutsawa mai cutarwa a cikin shigarwar mazaunin. Wannan kayan aiki yana haifarwa, yana amfani da kuma zai iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma akayi amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aiki ya haifar da tsangwama mai cutarwa ga rediyo ko liyafar talabijin, wanda za'a iya tantance shi ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara kutse ta ɗayan matakan masu zuwa:
- Sake daidaitawa ko matsar da eriya mai karɓa.
- Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
- Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
- Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.
FCC Tsanaki
- Duk wani canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa wannan kayan aikin.
- Wannan mai watsawa dole ne a kasance tare ko aiki tare tare da kowane eriya ko mai watsawa.
- Don aiki tsakanin 5.15 ~ 5.25GHz / 5.47 ~ 5.725GHz / 5.925 ~ 7.125GHz kewayon mitar, an iyakance shi zuwa yanayin gida.
- An haramta aikin 5.925 ~ 7.125GHz na wannan na'ura akan dandamalin mai, motoci, jiragen kasa, kwale-kwale, da jirage, sai dai an halatta aikin wannan na'urar a cikin manyan jiragen sama yayin da yake tafiya sama da ƙafa 10,000.
Takardu / Albarkatu
 |
Wurin shiga JUNIPER AP45 [pdf] Jagoran Shigarwa AP45 Access Point, AP45, Access Point |
