KENTIX 23-BLE Wireless Door Knobs Kulle Basic

Umarnin aminci

• Babu wani gyare-gyare na kowane nau'i da aka ba da izini ga samfuran Kentix GmbH, ban da waɗanda aka bayyana a cikin jagorar da ta dace.
• Don guje wa rashin aiki, yi amfani da sassa na asali kawai da na'urorin haɗi na asali.
• Kada a yi amfani da samfuran don rufe kayan taimako waɗanda ke da mahimmanci a cikin gaggawa (misali defibrillator, kayan agajin farko, magungunan gaggawa da kashe wuta).
• Kada a fallasa samfuran ga fenti ko acid.
• Ya kamata a ba da umarnin ga mai amfani da wanda ke aiwatar da shigarwa.
• Kentix bai yarda da wani abin alhaki ba don lalacewar ƙofa ko abubuwan da ke haifar da shigar da ba daidai ba.
• Babu wani abin alhaki da aka karɓa don raka'a da aka tsara ba daidai ba. Kentix ba zai zama abin dogaro ba a cikin abin da ya faru na rashin aiki, kamar gazawar samar da dama ga mutanen da suka ji rauni, lalacewar dukiya ko wasu lalacewa.
• Dole ne a duba dacewa da raka'a na kullewa a cikin kariya ta wuta ko ƙofofin fita gaggawa a kowane hali.

Umarnin aminci don samfuran da ke da ƙarfin baturi

• Kada a yi amfani da samfura a cikin yanayi mai yuwuwar fashewar abubuwa.
• Yi aiki da samfuran a cikin ƙayyadadden kewayon zafin jiki.
• ƙwararrun ma'aikata ne kawai za a iya aiwatar da shigarwa da maye gurbin baturi daidai da umarnin.
• Kar a yi caji, gajeriyar kewayawa, buɗe ko zafi batura.
• Lokacin shigar da baturin, tabbatar da polarity daidai.
• Dole ne koyaushe a yi aiki da na'urorin tare da batura da aka yi nufin samfurin.
• Lokacin canza batura, koyaushe maye gurbin duk batura.
• Zubar da tsofaffi ko batura masu amfani da kyau.
• A kiyaye batura daga wurin da yara za su iya isa.
• Yi amfani da adaftar wutar lantarki mai dacewa ta gaggawa kawai tare da 9V voltage don wutar lantarki ta gaggawa.

Amfani da samfuran, sufuri, ajiya

• Ƙwararren ƙwararrun ma'aikata ne kawai za a iya aiwatar da shigarwa da ƙaddamarwa bisa ga umarnin.
• Kentix bai yarda da wani abin alhaki ba don lalacewa ga naúrar ko abubuwan da ke haifar da shigar da ba daidai ba.
• Kare naúrar daga danshi, datti da lalacewa yayin sufuri, ajiya da aiki.
• Ana iya samun ƙarin bayani akan layi a docs.kentix.com.

zubarwa

• Kentix yana so ya nuna cewa, daidai da Dokar Kayan Wutar Lantarki da Lantarki (ElektroG), dole ne a tattara kayan aikin Kentix daban daga sharar gida da ba a ware ba.
• Dole ne a cire batura da aka yi amfani da su daga tsohuwar na'urar kuma a jefar da su daban kafin a ba da su a wurin tattarawa.
  Ana samun wuraren tattarawa na tsoffin kayan lantarki don dawowa. Ana iya samun adiresoshin daga hukumomin birni ko na birni.
• Idan na'urar da za a zubar ta ƙunshi bayanan sirri, mai amfani ne ke da alhakin share wannan bayanan.

Bayanin CE na Daidaitawa
Kentix GmbH da haka ya bayyana cewa kayan aikin sun dace da mahimman buƙatu da tanadin da suka dace na Dokokin 2014/53/EU da 2011/65/EU. Za'a iya buƙatar dogon sigar sanarwar CE ta yarda daga info@kentix.com.

Kentix GmbH
Carl-Benz-Straße 9
55743 Idar-Oberstein
kentix.com

Ƙarin takardu a
docs.kentix.com

Yin hawa

DoorLock-DC BASIC
[ART: KXC-KN1-BLE, KXC-KN2-BLE]

Amfani da niyya
Silinda ƙulli na lantarki an yi nufin shigarwa a cikin ƙofofin gini da kuma don kullewa da buɗewa. Dangane da nau'in samfurin, ana iya amfani da silinda ƙulli duka a ciki da waje.
Dole ne kawai wanda ya cancanta ya aiwatar da shigarwar.

Tsarin hawa

Shigarwa
Saka DoorLock-DC profile Silinda a cikin kofa da kuma kiyaye shi tare da kawo dunƙule forend kawota. Sa'an nan kuma danna maɓallin lantarki a cikin silinda har sai kullin ya shiga. Don tarwatse, yi amfani da katin tarwatsawa don sassauta haɗin kai tsakanin profile silinda da kundi. Sa'an nan kuma bi matakan da ke sama a bi da bi.

Gudanarwa
Ana buƙatar saitin katunan shirye-shirye don ƙaddamarwa.
Don bayanin saitin, duba murfin baya ko docs.kentix.com.

Abubuwan koyarwa a cikin DoorLock a cikin KentixONE
Dukkanin abubuwan haɗin rediyo na DoorLock DC/LE ana koyar da su ta hanyar keɓancewar software ta KentixONE akan AccessManager da aka haɗa (ART: KXP-16-x-BLE).
A lokacin aikin koyarwa, ana rage kewayon rediyo; Nisa tsakanin bangaren da AccessManager kada ya wuce 5-8m. Bayan nasarar koyarwa, zangon ya sake zuwa har zuwa mita 20.
A cikin menu abu "Dalla-dalla view", danna kan maɓallin "Ƙara na'ura". Zaɓi "DoorLock-DC/LE" nan kuma ka riƙe "katin tsarin" a takaice a gaban mai karatu bisa ga umarnin. Za a koyi na'urar a cikin software na KentixONE a cikin 'yan daƙiƙa kaɗan kuma za'a iya daidaita shi.

Na'urorin haɗi (an haɗa cikin bayarwa)
Kayan aikin maye gurbin baturi, saitin katunan shirye-shirye, 2x Li-baturi 3V

Bayanan fasaha
Mitar rediyo: 2.4GHz (BLE)
Powerarfin watsawa: 1mW
Mitar RFID: 13.56 MHz
Ƙarfin filin RFID: daidai da EN 300 330
Baturi: guda 2, nau'in CR2 Lithium 3V

DoorLock-DC PRO
[ART: KXC-KN4-IP55-BLE,
KXC-KN4-IP66-BLE]

Amfani da niyya
Silinda ƙulli na lantarki an yi nufin shigarwa a cikin ƙofofin gini da kuma don kullewa da buɗewa. Dangane da nau'in samfurin, ana iya amfani da silinda ƙulli duka a ciki da waje.
Dole ne kawai wanda ya cancanta ya aiwatar da shigarwar.

Tsarin hawa

Shigarwa
Saka matsugunin silinda tare da kullin lantarki a cikin kulle kuma aminta da shi tare da dunƙule da aka kawo. Matsa maɓallin injin zuwa ƙarshen gidan Silinda sannan a tsare shi tare da dunƙule dunƙule. Don wargajewa, aiwatar da matakan da ke sama a bi da bi.

Gudanarwa
Ana buƙatar saitin katunan shirye-shirye don ƙaddamarwa.
Don bayanin saitin, duba murfin baya ko docs.kentix.com.

Abubuwan koyarwa a cikin DoorLock a cikin KentixONE
Dukkanin abubuwan haɗin rediyo na DoorLock DC/LE ana koyar da su ta hanyar keɓancewar software ta KentixONE akan AccessManager da aka haɗa (ART: KXP-16-x-BLE).
A lokacin aikin koyarwa, ana rage kewayon rediyo; Nisa tsakanin bangaren da AccessManager kada ya wuce 5-8m. Bayan nasarar koyarwa, zangon ya sake zuwa har zuwa mita 20.
A cikin menu abu "Dalla-dalla view", danna kan maɓallin "Ƙara na'ura". Zaɓi "DoorLock-DC/LE" nan kuma ka riƙe "katin tsarin" a takaice a gaban mai karatu bisa ga umarnin. Za a koyi na'urar a cikin software na KentixONE a cikin 'yan daƙiƙa kaɗan kuma za'a iya daidaita shi.

Na'urorin haɗi (an haɗa cikin bayarwa)
Kayan aikin maye gurbin baturi, saitin katunan shirye-shirye, 1x Li-baturi 3V, maɓallin Allen

Bayanan fasaha
Mitar rediyo: 2.4GHz (BLE)
Powerarfin watsawa: 1mW
Mitar RFID: 13.56 MHz
Ƙarfin filin RFID: daidai da EN 300 330
Baturi: 1 yanki, nau'in CR2 Lithium 3V

Kulawa da shawarwarin aiki

Tsaftacewa
Tsaftace Ƙofar Ƙofar kawai tare da bushe ko dan kadan damp zane. Yi amfani da masu tsabtace gida na kasuwanci kawai don wannan dalili. Kada a yi amfani da abubuwan tsaftacewa masu lalata ko lalata.

Kulawa
Abubuwan injin mai aƙalla sau ɗaya a shekara (fiye da yawa a yanayin amfani mai nauyi). Don yin wannan, rushe DoorLock-DC. Tsaftace kayan aikin injiniya tare da busasshen zane kuma sake sakewa.
Don DoorLock-DC BASIC, shafa mai ga profile silinda da makanikai na ƙulli.
Tare da DoorLock-DC PRO, shafa mai zuwa zoben kulle na profile silinda.
Sauƙaƙa mai da zoben hatimi a duk lokacin da aka cire akwati.
Lubrite kawai tare da mai kulawa mara gudu (KXC-PLS50ML).

DoorLock-LE
[ART: KXC-LE-BLE-R,
KXC-LE-BLE-L]

Amfani da niyya
An tsara maƙallan lever na lantarki don shigarwa a cikin ƙofofin gini da kuma buɗe makullin. Dangane da nau'in samfurin, ana iya amfani dashi a ciki da waje.
Dole ne kawai wanda ya cancanta ya aiwatar da shigarwar.

Tsarin hawa

Shigarwa
Haɗa mariƙin lefa na hannun lever na injina daga wancan gefe kuma a murƙushe shi zuwa hannun ledar lantarki ta cikin ganyen kofa. Yi amfani da skru da aka kawo don wannan dalili.
Daidaita hannun kofa na inji, tana riƙe hannun ƙofar a kwance. Don hannayen ƙofa masu nuni zuwa dama, ƙara ƙarar furen zuwa hagu, shiryar da shi akan dutsen riƙon kuma barin kamawar bayoneti ya shiga. Hakazalika, don hannayen ƙofar da ke nunawa zuwa hagu, ƙarfafa furen zuwa dama. Yi dunƙule a cikin dunƙule makullin a gefen hannun kuma ƙara ta da ƙarfi. Don wargajewa, aiwatar da matakan da ke sama a bi da bi.

Gudanarwa
Ana buƙatar saitin katunan shirye-shirye don ƙaddamarwa.
Don bayanin saitin, duba murfin baya ko docs.kentix.com.

Abubuwan koyarwa a cikin DoorLock a cikin KentixONE
Ana koyar da duk abubuwan haɗin rediyo na DoorLock DC/LE ta hanyar
KentixONE software na dubawa akan AccessManager da aka haɗa (ART: KXP-16-x-BLE).
A lokacin aikin koyarwa, ana rage kewayon rediyo; Nisa tsakanin bangaren da AccessManager kada ya wuce 5-8m. Bayan nasarar koyarwa, zangon ya sake zuwa har zuwa mita 20.
A cikin menu abu "Dalla-dalla view", danna kan maɓallin "Ƙara na'ura". Zaɓi "DoorLock-DC/LE" nan kuma ka riƙe "katin tsarin" a takaice a gaban mai karatu bisa ga umarnin. Za a koyi na'urar a cikin software na KentixONE a cikin 'yan daƙiƙa kaɗan kuma za'a iya daidaita shi.

Na'urorin haɗi (an haɗa cikin bayarwa)
Maɓallin Allen, murabba'i, gyara sukurori, 1 x Li-batir 3V

Bayanan fasaha
Mitar rediyo: 2.4GHz (BLE)
Powerarfin watsawa: 1mW
Mitar RFID: 13.56 MHz
Ƙarfin filin RFID: daidai da EN 300 330
Baturi: 1 yanki, nau'in CR123 Lithium 3V

DoorLock-LE mit Beschlag
[ART: KXC-LE-BLE-FS, KXC-LE-BLE-FSB] KXC-LE-BLE-FW, KXC-LE-BLE-FWB,
KXC-LE-BLE-FL, KXC-LE-BLE-FLB]

Amfani da niyya
An tsara ƙirar ƙofar lantarki don shigarwa a cikin ƙofofin gini da kuma buɗe makullin. Dangane da nau'in samfurin, ana iya amfani dashi a ciki da waje.
Dole ne kawai wanda ya cancanta ya aiwatar da shigarwar.

Tsarin hawa

Shigarwa
Saka madaidaicin madaurin gindin rikewar ledar lantarki a cikin madaurin gindin makullin. Haɗa farantin gindin hannun lever ɗin injina daga wancan gefe kuma a murƙushe shi zuwa hannun ledar lantarki ta cikin ganyen kofa. Yi amfani da kusoshi masu ɗaure da ƙusoshin zaren da aka kawo don wannan dalili. Sanya murfin escutcheon akan hannayen lever guda biyu akan farantin tushe kuma cire dunƙule makullin a ƙasan escutcheon domin escutcheon ya zauna da ƙarfi. Dunƙule a cikin dunƙule makullin a ƙasan hannun kofa na inji kuma ƙara ta da ƙarfi. Don wargajewa, aiwatar da matakan da ke sama a bi da bi.

Gudanarwa
Ana buƙatar saitin katunan shirye-shirye don ƙaddamarwa.
Don bayanin saitin, duba murfin baya ko docs.kentix.com.

Abubuwan koyarwa a cikin DoorLock a cikin KentixONE
Dukkanin abubuwan haɗin rediyo na DoorLock DC/LE ana koyar da su ta hanyar keɓancewar software ta KentixONE akan AccessManager da aka haɗa (ART: KXP-16-x-BLE).
A lokacin aikin koyarwa, ana rage kewayon rediyo; Nisa tsakanin bangaren da AccessManager kada ya wuce 5-8m. Bayan nasarar koyarwa, zangon ya sake zuwa har zuwa mita 20.
A cikin menu abu "Dalla-dalla view", danna kan maɓallin "Ƙara na'ura".
Zaɓi "DoorLock-DC/LE" nan kuma ka riƙe "katin tsarin" a takaice a gaban mai karatu bisa ga umarnin. Za a koyi na'urar a cikin software na KentixONE a cikin 'yan daƙiƙa kaɗan sannan za'a iya daidaita shi.

Na'urorin haɗi (an haɗa cikin bayarwa)
Maɓallin Allen, murabba'i, gyara sukurori, 1 x Li-batir 3V

Bayanan fasaha
Mitar rediyo: 2.4GHz (BLE)
Powerarfin watsawa: 1mW
Mitar RFID: 13.56 MHz
Ƙarfin filin RFID: daidai da EN 300 330
Baturi: 1 yanki, nau'in CR123 Lithium 3V

Kulawa da shawarwarin aiki

Tsaftacewa
Tsaftace Ƙofar Ƙofar kawai tare da bushe ko dan kadan damp zane. Yi amfani da masu tsabtace gida na kasuwanci kawai don wannan dalili. Kada a yi amfani da abubuwan tsaftacewa masu lalata ko lalata.

Kulawa
Aƙalla sau ɗaya a shekara (mafi sau da yawa a yanayin amfani mai nauyi) kula da kayan aikin injiniya kuma bincika sauƙin motsi. Don tabbatar da nau'in kariya na IP66 na DoorLock-LE don amfani da waje, hatimin, wanda ya ƙunshi babban zoben rufewa da ƙugiya tare da zoben rufewa, dole ne a maye gurbinsu koyaushe duk lokacin da aka buɗe hannun (canjin baturi). Sauƙaƙa mai da zoben hatimin a duk lokacin da aka cire akwati.

DoorLock-RA
[ART: KXC-RA2-14-BLE, KXC-RA2-23-BLE]

Amfani da niyya
An ƙera makullin majalisar lantarki don shigarwa a cikin maɓalli da ƙofofin majalisar da aka yi da itace, ƙarfe da aluminum tare da kauri har zuwa 20 mm kuma don kullewa da buɗewa. An ƙera makullin majalisar don amfanin cikin gida kawai.
Dole ne kawai wanda ya cancanta ya aiwatar da shigarwar.

Tsarin hawa

Shigarwa
Tura makullin majalisar ta ramin da ke cikin kofa sannan a gyara shi a wurin ta amfani da goro da dunƙule dunƙulewa. Sa'an nan kuma gyara lever na kulle da aka kawo da kuma wankin kulle tare da goro. Don wargajewa, aiwatar da matakan da ke sama a bi da bi.

Gudanarwa
Ana buƙatar saitin katunan shirye-shirye don ƙaddamarwa.
Don bayanin saitin, duba murfin baya ko docs.kentix.com.

Abubuwan koyarwa a cikin DoorLock a cikin KentixONE
Dukkanin abubuwan haɗin rediyo na DoorLock DC/LE ana koyar da su ta hanyar keɓancewar software ta KentixONE akan AccessManager da aka haɗa (ART: KXP-16-x-BLE).
A lokacin aikin koyarwa, ana rage kewayon rediyo; Nisa tsakanin bangaren da AccessManager kada ya wuce 5-8m. Bayan nasarar koyarwa, zangon ya sake zuwa har zuwa mita 20.
A cikin menu abu "Dalla-dalla view", danna kan maɓallin "Ƙara na'ura".
Zaɓi "DoorLock-DC/LE" nan kuma ka riƙe "katin tsarin" a takaice a gaban mai karatu bisa ga umarnin. Za a koyi na'urar a cikin software na KentixONE a cikin 'yan daƙiƙa kaɗan sannan za'a iya daidaita shi.

Na'urorin haɗi (an haɗa su cikin iyakar bayarwa)
Kayan aikin canza baturi, saitin katunan shirye-shirye, 1 x Li-baturi 3.6V

Bayanan fasaha
Mitar rediyo: 2.4GHz (BLE)
Powerarfin watsawa: 1mW
Mitar RFID: 13.56 MHz
Ƙarfin filin RFID: daidai da EN 300 330
Baturi: 1 yanki, nau'in AA Lithium 3.6V (ER14505M)

Kulawa da shawarwarin aiki

Tsaftacewa
Tsaftace ƘofarLock kawai tare da busasshiyar kyalle.

Kulawa
Bincika kayan aikin injiniya don sauƙin motsi aƙalla sau ɗaya a shekara.

Shirye-shirye

Muhimman bayanai

• Kowane saitin katunan manyan yana zuwa da katin da aka buga ID na tsarin a kai. Muna ba da shawarar sosai cewa ka ware wannan katin daga sauran saitin kuma ka adana shi a wuri mai aminci (lafiya).
  Katin ya ƙunshi tsarin ID kuma ana buƙata don sake yin oda idan katin sabis ɗin ya ɓace. Idan tsarin ID ɗin ya ɓace, sake saiti mai cin lokaci kawai a masana'anta yana yiwuwa!
• Katin maɓallin sabis (rawaya) ya ƙunshi tsarin ID kuma ana buƙata kawai don koyarwa-a cikin abubuwan DoorLock zuwa AccessPoint daban-daban. Banda ɗaya shine kullin DoorLock-DC BASIC, inda ake buƙatar katin tsarin don koyarwa a cikin katunan sabis don maye gurbin baturi da rarrabuwa.
• Ana iya ƙirƙirar kwafi (katunan clone) kawai idan an nuna ID na tsarin da aka buga akan “katin tsarin”. Ana buƙatar sanarwar saki daga abokin ciniki na ƙarshe don yin odar katunan clone.
• Abubuwan DoorLock kawai za a iya sake saita su zuwa yanayin masana'anta na asali a masana'anta. Lokacin da aka dawo da abubuwan haɗin gwiwa, wannan na iya haifar da farashi don sake saiti. Sake saita katin sabis ɗin da aka koyar zuwa sabon katin sabis yana yiwuwa ba tare da wata matsala ba. Ana buƙatar duka katunan don wannan.

DoorLock-DC BASIC
[ART: KXC-KN1-BLE, KXC-KN2-BLE]

Shirya na'urar

1. Cire murfin ƙwanƙwasa
2. Cire makullin baturi daga sashin baturi ko saka batura.

Katin maɓallin sabis na koyarwa

1. Riƙe katin maɓallin sabis (rawaya) a gaban ƙugiya, jira 5 seconds.
   
2. Riƙe katin maɓallin sabis a gaban ƙugiya kuma don fara yanayin shirye-shirye.
3. Riƙe katin canza baturi (kore) a gaban ƙugiya, jira 5 seconds.
   
4. Riƙe katin tarwatsawa (shuɗi) a gaban ƙugiya, jira 5 seconds
   
5. Riƙe katin maɓallin sabis (rawaya) a gaban ƙugiya don kammala aikin.
   

Gwajin aiki

1. Riƙe maɓallin sabis (rawaya) a taƙaice a gaban ƙugiya don fara yanayin shirye-shirye.
2. Riƙe katin mai amfani / maɓalli a takaice a gabansa don tsara shi. Riƙe maɓallin sabis a gaban ƙugiya don kammala aikin.
3. Riƙe katin mai amfani da aka tsara a gaban naúrar. Lokacin da shigarwa ya cika, dole ne a yanzu ya yiwu a buɗe naúrar.
4. Riƙe katin canza baturi (kore) a gaban ƙugiya. Ana saki fil ɗin riƙewa don murfin ƙulli kuma ana iya dannawa cikin ƙulli. Sannan sake rike shi don kulle shi a wuri.
5. Rike katin tarwatsawa (blue) a gaban ƙulli. Knob ɗin yana matsawa zuwa matsayin wargajewa. Lokacin da aka sanya a kan profile Silinda, makullin kulle na silinda shima yana juyawa. Sa'an nan kuma sake riƙe shi don kulle shi, kullin yanzu yana sake juyawa kyauta.

Rage-taron ƙulli

1. Rike katin ƙwanƙwasa (shuɗi) a gaban ƙugiya, kullin yana matsawa zuwa wurin rarrabawa kuma yana aiki na dindindin. Ana iya cire shi daga profile silinda ta hanyar juyawa da jan shi kadan.
2. Don haɗawa, sanya ƙulli kuma ka riƙe katin tarwatsawa (blue) a gabansa, ƙulli da pro.file Silinda an kulle kuma ana iya juya ƙulli kyauta

Canza baturi

1. Riƙe katin canza baturi (kore) a gaban ƙugiya, madannin riƙon don sakewaasing murfin ƙulli ya koma baya, ana iya cire murfin don canza baturi.
2. Bayan shigar da murfin ƙulli, tabbatar da cewa an kulle fil ɗin daidai a wuri.

DoorLock-DC PRO
[ART: KXC-KN4-IP55,
KXC-KN4-IP66]

Shirya na'urar

1. Sanya magnet akan wurin da aka yiwa alama (zagaye na hutu) na harsashi.
2. Cire ƙwanƙwasa casing sannan saka baturin (nau'in CR2).
3. Tura ƙwanƙwasa casing a kan kulli har zuwa hatimin roba.
4. Sanya magnet akan alamar murfin ƙwanƙwasa kuma tura murfin a kan inda zai tafi.

Katin maɓallin sabis na koyarwa

1. Riƙe katin maɓallin sabis (rawaya) a gaban ƙugiya, jira 5 seconds.
   
2. Riƙe katin maɓallin sabis ɗin a gaban ƙugiya kuma. Yanzu an tsara maɓallin sabis.

Gwajin aiki

1. Riƙe maɓallin sabis (rawaya) a taƙaice a gaban ƙugiya don fara yanayin shirye-shirye.
2. Riƙe katin mai amfani / maɓalli a takaice a gabansa don tsara shi.
3. Riƙe maɓallin sabis a gaban ƙugiya don kammala aikin.
4. Riƙe katin mai amfani da aka tsara a gaban naúrar. Lokacin da shigarwa ya cika, dole ne a yanzu ya yiwu a buɗe naúrar.

Canza baturi

1. Sanya kayan aikin canjin baturi akan wurin da aka yiwa alama a gefen ƙulli na ciki casing.
2. Tare da kayan aikin canza baturi a wurin, cire kullin casing.
3. Cire baturin da aka yi amfani da shi kuma saka sabo. Tabbatar cewa polarity daidai ne.
4. Sauya ƙulli casing tare da kayan aikin maye gurbin baturi a wurin.
5. Cire kayan aikin kuma duba daidai daidai hannun hannun siyan akan ƙugiya.

DoorLock-LE
[ART: KXC-LE-BLE-R,
KXC-LE-BLE-L]

Shirya na'urar

1. Matsa baturin da ke kewaye (nau'in CR123) a cikin hannu ko saka shi a cikin mariƙin baturi kuma sanya murfin a kan lefa.
2. Maƙala kan lever ta amfani da maɓallin Allen da aka kawo.

Katin maɓallin sabis na koyarwa

1. Riƙe katin maɓallin sabis (rawaya) na kusan daƙiƙa 1 a gaban lever don kunnawa.
   
2. Riƙe katin maɓallin sabis ɗin a gaban lever kuma. Yanzu an tsara maɓallin sabis.

Gwajin aiki

1. Riƙe maɓallin sabis (rawaya) a taƙaice a gaban lever don fara yanayin shirye-shirye.
2. Riƙe katin mai amfani / maɓalli a takaice a gabansa don tsara shi.
3. Riƙe maɓallin sabis a gaban lever don kammala aikin.
4. Riƙe katin mai amfani da aka tsara a gaban naúrar. Lokacin da shigarwa ya cika, dole ne a yanzu ya yiwu a buɗe naúrar.

Canza baturi

1. Yin amfani da maɓallin Allen da aka kawo, mayar da dunƙule a ciki na DoorLock-LE zuwa ciki.
2. Cire hannun rigar.
3. Cire baturin da aka yi amfani da shi kuma saka sabon=daya. Tabbatar cewa polarity daidai ne (madaidaicin sandar baturi yana nuni zuwa hannun hannun riga). Lokacin shigar da baturi, DoorLock dole ne ya kasance a cikin ainihin asali a kwance.

DoorLock-RA
[ART: KXC-RA1-BLE, KXC-RA2-BLE]

Shirya na'urar

1. Saka baturin da aka kawo (nau'in ER14505) cikin sashin baturin.
2. Saka sashin baturin cikin makullin majalisar

Katin maɓallin sabis na koyarwa

1. Danna maɓallin farin kan DoorLock-RA.
2. Riƙe katin maɓallin sabis (rawaya) a gaban makullin majalisar har na kusan daƙiƙa 1.
   Yanzu an tsara maɓallin sabis.
   

Gwajin aiki

1. Riƙe maɓallin sabis (rawaya) a taƙaice a gaban makullin majalisar don fara yanayin shirye-shirye.
2. Riƙe katin mai amfani / maɓalli a takaice a gabansa don tsara shi.
3. Riƙe maɓallin sabis a gaban makullin majalisar don kammala aikin.
4. Riƙe katin mai amfani da aka tsara a gaban naúrar. Lokacin da shigarwa ya cika, dole ne a yanzu ya yiwu a buɗe naúrar.

Canza baturi

1. Bude sashin baturi na DoorLock-RA tare da kayan aikin maye gurbin baturi. Don yin wannan, danna kayan aiki a cikin buɗewa a gefen DoorLock har sai an cire sashin baturi.
2. Cire baturin da aka yi amfani da shi kuma saka sabo. Tabbatar cewa polarity daidai ne.
3. Koma sashin baturin ciki har sai ya danna wurin.

Sake saitin abubuwan da aka gyara

Sake saita AccessManager
Dukansu AccessManager da kowane na'urorin Kentix DoorLock za a iya sake saita su zuwa saitunan masana'anta idan an buƙata (misali rashin daidaitawa). Don wannan dalili, AccessManager yana da maɓallin da za'a iya isa ta bayan gidan (hutu a saman dama).
Don sake saiti, da fatan za a bi umarnin da ke cikin littafin.

Sake saita abubuwan DoorLock

1. Riƙe katin maɓallin sabis (rawaya) a gaban sashin karatun na'urar kuma ajiye shi a wurin har sai yanayin shirye-shiryen ya ƙare ta atomatik (daƙiƙa 15). Sannan jira 5 seconds.
2. Riƙe katin maɓallin sabis a gaban mai karatu kuma bar shi a gabansa. Na'urar DoorLock tana sigina tsarin sharewa tare da gajerun sautuna.
   Ajiye katin maɓallin sabis a gaban mai karatu har sai siginar ta tsaya.

Canja katin maɓalli na sabis zuwa wani sabo
Idan ana so a sake horar da naúrar daga tsohon zuwa sabon katin maɓalli, dole ne a kammala waɗannan matakai masu zuwa:

1. Riƙe tsohon katin maɓallin sabis (rawaya) a gaban mai karatu don fara yanayin shirye-shirye.
2. Riƙe sabon katin maɓallin sabis (rawaya) a gaban mai karatu. Nasarar sake karatun ana yin siginar ƙarar ƙara da ƙarshen yanayin shirye-shirye.
3. Za a iya amfani da naúrar a yanzu tare da sabon katin maɓalli na sabis (rawaya).

Takardu / Albarkatu

KENTIX 23-BLE Wireless Door Knobs Kulle Basic [pdf] Jagoran Jagora 23-BLE Ƙofar Ƙofar Mara waya ta Ƙofar Ƙofar Ƙofar Ƙirar Ƙofar, 23-BLE, Ƙofar Ƙofar Ƙofar Ƙirar Ƙirar Ƙofar Ƙofar Ƙofar Ƙofar Ƙofar Ƙofar Ƙirar Ƙirar Ƙirar Ƙirar Ƙirar Ƙirar Ƙirar Ƙirar Ƙirar Ƙirar Ƙirar Ƙirar Ƙirar Ƙirar Ƙimar Ƙirar Ƙofar Ƙofa

Magana

• Manual mai amfani