Logicbus M-7017Z 10/20 Channel na yanzu da Voltage Module Input na Analog

Jagoran Fara Mai Sauri

Samfura:

http://www.icpdas-usa.com/m_7017z.html
http://www.icpdas-usa.com/dcon_utility_pro.html

Gabatarwa

M-7017Z yana da tashoshi masu daidaita software - daga tashoshi daban-daban guda 10 zuwa tashoshi guda 20 masu ƙarewa. Duka voltage da na yanzu ana karɓa: ± 150mV, ± 500mV, ± 1V, ± 5V, ± 10V, ± 20mA, 0 ~ 20mA, da 4 ~ 20mA. Babu resistor na waje da ake buƙata don auna halin yanzu, duk abin da za ku yi shine fara buɗe harsashi kuma ku gama saitin ta jumper. Auna halin yanzu yana da sauƙi kamar yadda kuke tunani! M-7017Z kuma ya wuce 240Vrms akan voltage kariya don abubuwan shigar daban da 150Vrms akan voltage kariya don shigarwar guda ɗaya, 3000VDC keɓewar intra-module, +/- 4KV tuntuɓar kariya ta ESD, +/- 4KV EFT kariya don iko, da +/- 1KV EFT kariya ga RS-485. The sampFarashin M-7017Z yana canzawa. Akwai yanayin sauri da yanayin al'ada don la'akarinku. Yanayin sauri shine 60Hz tare da ƙudurin 12-bit. Yanayin al'ada shine 10Hz tare da 16 bit Resolution.

Aikin Tasha

Tsarin toshe / Waya

Saitunan Tsohuwar

Saitunan tsoho na M-7017, M-7018 da M-7019 jerin kayayyaki sune:

• Ladabi: Modbus RTU
• Adireshin Module: 01
• Nau'in shigarwar Analog:
  • Nau'in 08, -10V zuwa 10V, don jerin M-7017 da M-7019
  • Nau'in 1B, -150V zuwa 150V, don M-7017R-A5
  • Nau'in 0D, -20mA zuwa +20mA don M-7017C da M-7017RC
  • Rubuta 05, -2.5V zuwa 2.5V, don jerin M-7018
• Baud Rate: 9600 bps
• Saitin tacewa a kin amincewa da 60Hz (Ba a amfani da M-7019R, sigar firmware B2.6 da baya)

Kanfigareshan

Don shigar da tsarin, bi matakan da ke ƙasa:

1. Haɗa shigarwar analog na thermistor.
2. Haɗa tsarin zuwa cibiyar sadarwar RS-485 ta amfani da DATA+ da DATA- tashoshi. Idan mai masaukin yana sanye da kayan aikin RS-232 kawai, to za a buƙaci mai sauya RS-232 zuwa RS-485.
3. Haɗa ƙirar zuwa wutar lantarki ta amfani da + Vs da GND tashoshi. Lura cewa voltagYa kamata ya kasance a cikin kewayon +10 zuwa +30V DC.
4. Bude DCON mai amfani pro
   1. danna tashar COM (alamar farko).
   2. Yana iya zaɓar zaɓuɓɓuka masu yawa kamar Baud Rate, Protocol, Checksum, da Tsarin don bincika tsarin. Za a iya samun saitunan tsoho don tsarin a cikin Sashe na 3. Danna Ok bayan zabar saitin tashar tashar COM.
5. DCON mai amfani pro zai nemo tashar COM da aka zaɓa bisa ga saitin da aka saita a baya. DCON Utility Pro yana goyan bayan DCON da Modbus yarjejeniya don duk ICPDAS da sauran kayayyaki.
6. Saitin tsarin I/O na Kanfigareshan akan PC
7. Don samfuran M-7000 ta amfani da ka'idar Modbus RTU, saita tsarin ta amfani da ayyuka masu zuwa.
   1. Karamin aiki 04h na Aiki 46h, duba littafin mai amfani Sashe na 3.3.2 Karamin aiki 06h na Aiki 46h, duba littafin mai amfani
   2. Sashe na 3.3.4 Sub-aiki 08h na Aiki 46h, duba littafin jagora Sashe na 3.3.6
8. Don samfuran M-7000 ta amfani da ka'idar Modbus RTU, yi amfani da Aiki 04h don karanta bayanai daga tashoshin shigarwa. Duba littafin jagorar mai amfani Sashe 3.2 don cikakkun bayanai.
9. Idan mai amfani bai san umarnin ba, mai amfani zai iya zaɓar Adireshi da ID, zai nuna wasu umarni na nuni kamar ƙasa. Masu amfani za su iya zaɓar umarni masu mahimmanci don gwadawa ko cire kayan aiki.

Takardu / Albarkatu

Logicbus M-7017Z 10/20 Channel na yanzu da Voltage Module Input na Analog [pdf] Jagorar mai amfani M-7017Z 10 20 Channel na yanzu da Voltage Module Input Analog, M-7017Z, Tashoshi 10 na Yanzu da Voltage Module Input na Analog, Tashoshi 20 na Yanzu da Voltage Module Input na Analog, Na yanzu da Voltage Module Input na Analog, Module Input na Analog na Yanzu, Voltage Module Input na Analog, Module Input na Analog, Module Input, Module

Magana

• Manual mai amfani