LTECH KMS1 Switch Module

Gabatarwar Samfur

• Fully supports major smart home ecosystems including Apple Home, SmartThings, Google Assistant, and Amazon, enabling unified management across platforms.
• Built-in Thread module, compatible with the Matter protocol, supports Siri, Google, and Alexa voice control.
• Supports OTA firmware updates to continuously receive the latest features and security patches, ensuring long-term device stability.
• Parameter settings for switch type and power-on status can be completed via the NFC Lighting App.
• Reserved mechanical switch/reset switch interface accommodates both traditional operating habits and smart scenario requirements.

Bayanan Fasaha

Samfura	KMS1
Nau'in mara waya	Matsala akan Zaren
Canja tashar	1CH
Ƙa'idar aikitage	100-240V ~, 50/60Hz
Max. load parameters of the relay	Resistive load: 1000W@230Vac, 500W@110Vac Capacitive load: 400W@230Vac, 200W@110Vac
Maimaita tashin hankali na halin yanzu	70A @ 10ms
Yanayin aiki	-25°C ~ 50°C
Girman samfur	L45×W45.5×H20.5(mm)
Nauyin samfur	38 g
Matsayi	UL 8750, EN 61347-2-13:2014+A1:2017, EN 61347-1:2015+A1:2021, EN 62493:2015/A1:2022

Hotunan Samfur

GIRMA

• Naúrar: mm
• Girma: 45 x 45.5 x 20.5

Tsarin Waya

1.  Mechanical Switch Wiring Diagram
   Includes connections for load, line (L), and neutral (N).
2.  Push Switch Wiring Diagram
   Includes connections for load, line (L), and neutral (N).

Yi amfani da NFC Lighting APP
Scan the QR code with your mobile phone and install the APP as prompted. Compatible with iOS 13 or above and Android NFC-enabled models.

Read the Device
Click “Read/Write LED driver” in the APP [home page], place the sensing area of the phone near the NFC identification point of the driver, and read the device parameters.

Gyara Ma'auni
Click “Parameter Management” to select the switch type. When selecting a reset switch, you can configure the device’s power-on state function.

Add to Matter Platform Instructions

1. This device supports control via major smart home platforms, including Apple Home, Amazon Alexa, Google Home, Smart Things, and others.
2. To connect Matter over Thread devices, prepare a Matter hub supporting Thread border router functionality from major platforms.

Samfura masu jituwa

Saita Example

• This guide uses Apple Home as an example. Prepare an iPhone (iOS 16.2 or later) or iPad (iPadOS 16.2 or later) with the latest firmware, along with an Apple HomePod mini also running the latest firmware. Connect your iPhone or iPad to your home Wi-Fi network, launch the Apple Home app, and follow Apple’s instructions to set up the HomePod mini.
• For iPhone models 15 and above, no Matter hub is required; they can be added directly.

Ƙara Na'urorin haɗi

• Open the Apple Home app and tap “Add or Scan Accessories.” Add the device to Apple Home by scanning the QR code sticker on the device.
• *You can also activate service via NFC: Simply hold your iPhone 16 or later model near the device’s NFC sensor area to be recognized and activated.

Na'urar sarrafawa
After successfully adding the device to Apple Home, tap the device icon to turn it on or off.

Abubuwan Ci gaba

Supports creating groups, scenes, and automations, as well as remote control and scheduled control. Devices can also be controlled via Siri voice commands.

Mayar da Saitunan Masana'antu

Reset Button Reset
Press and hold the reset button for 15 seconds until the indicator light flashes red rapidly, then release. Within 3 seconds, press the reset button three times briefly. The red light will then switch to slow flashing, indicating the device has begun restoring factory settings. When the indicator light flashes blue rapidly, the restoration is complete.

Sake saita Sake kunnawa
A yanayin da wani iko kutage, use the switch to power on the device for 15 seconds before powering it off. Repeat this power cycle six times consecutively (each cycle consisting of 2 seconds on and 5 seconds off). After the seventh power cycle, the load lamp will flash three times, indicating a successful reset to factory settings.

Hankali

• Ya kamata ƙwararren ƙwararren ya yi shigarwa da ƙaddamar da samfur.
• Our company products are not waterproof or lightning-proof (special models excepted). Please avoid the sun and rain. When installed outdoors, please ensure they are mounted in a waterproof enclosure or in an area equipped with lightning protection devices.
• Kyakkyawan zafi mai zafi zai tsawanta rayuwar aiki na samfurori. Da fatan za a tabbatar da samun iska mai kyau.
• Da fatan za a duba idan voltage amfani da ya bi ka'idodin siga na samfur.
• Diamita na waya da aka yi amfani da shi dole ne ya iya loda kayan aikin hasken da kuke haɗawa da tabbatar da ingantaccen wayoyi.
• Kafin ka kunna samfura, da fatan za a tabbatar cewa duk wayoyi daidai suke idan akwai haɗin da ba daidai ba wanda ke haifar da lalacewa ga kayan aikin haske.
• Idan kuskure ya faru, da fatan za a yi ƙoƙarin gyara samfuran da kanku. Idan kuna da kowace tambaya, da fatan za a tuntuɓi masu samar da ku.

Yarjejeniyar Garanti

Lokacin garanti daga ranar bayarwa: shekaru 2. Ana ba da sabis na gyara kyauta ko musanya masu inganci a cikin lokacin garanti.

Ware Garanti

• Bayan lokutan garanti.
• Duk wani lalacewa ta wucin gadi da babban voltage, fiye da kima, ko ayyuka marasa dacewa.
• Kayayyakin da ke da mummunar lalacewar jiki.
• Lalacewar da bala'o'i ke haifarwa da kuma tilasta majeure.

1. An lalata alamun garanti da lambar sirri.
2. No contract signed by our company.

Takardu / Albarkatu

LTECH KMS1 Switch Module [pdf] Littafin Mai shi KMS1 Switch Module, KMS1, Switch Module, Module

Magana

• Manual mai amfani