MBJ CTR-51 Mai Gudanarwa
Haɗin Kan Injiniya
Ana ba da masu kula da CTR tare da lambobi masu toshe don hasken LED, siginar sarrafawa, dubawar RS232 da ikon shigarwa. An yi mai sarrafawa don hawan dogo na saman hula, faifan bidiyo ya kulle naúrar zuwa saman dogo na hula.
Ana iya samun ƙarin zanen 2D da 3D akan layi: www.mbj-imaging.com
Bayanan Tsaro
Kafin aiki tare da wannan naúrar, karanta gargaɗin da umarnin aikace-aikace a hankali kuma gaba ɗaya.
- An ƙera na'urar don amfanin cikin gida kawai.
- Lafiya - Dole ne a cire haɗin na'urar daga tushen wutar lantarki kafin shigarwa da/ko kiyayewa ya fara. Kada a yi amfani da na'urar lokacin da gazawa na iya haifar da rauni na mutum.
- Wutar Lantarki - Gidan yana ware ta hanyar lantarki daga ƙasa na wutar lantarki. Wucewa halaltaccen aiki voltage ko ƙetare iyakar da aka ba da izinin sauyawa na yanzu kowane tashoshi na iya haifar da lalata na'urar ko zuwa gajarta mai mahimmanci na rayuwar ƙirar hasken LED da aka haɗa.
- Haɗin injiniya - An yi mai sarrafawa don hawan dogo na saman hula. Ana iya amfani da hoton bidiyo don kulle naúrar zuwa saman dogo na hula. Don mafi kyawun kwararar zafi ana bada shawarar nisan hagu/dama na 10mm zuwa naúrar gaba.
Matsayin LED's CTR-50/51
| LED | Matsayi | Ma'ana |
| LED | Matsayi | Ma'ana |
| 1 Ƙarfi | KASHE KASHE | Shigar da wutar mai sarrafawa – a kashe
Shigar da wutar lantarki - Kunnawa |
| 2 Hali 1) | KASHE KASHE | Fitilar LED a kashe
Hasken LED ya kunna |
| ssll | Babu na yanzu, babu LED da aka haɗa | |
| sll | Ƙaddamar da aka samu yayin da yake cikin IRQ2) (Flash + gap zone), ya ɓace | |
| slsl | iyakar zafin da aka yarda ya kai | |
| sss | duba serial matsayin RS232 a cikin rajistan ayyukan | |
| 3 Tuba | KASHE AKAN FLASH | Ƙarƙashin ƙasa Ƙarfafa babban jiha
4x: tsarin taya tsarin |
| 4 MBJ | KASHE | Ba a amfani dashi ba |
- s = gajeriyar walƙiya, l = dogon filasha
- IRQ = katse bukatar
Samfura a cikin Jerin
| Saukewa: CTR-50 | |
| Aiki 1-tashar sarrafawa na yanzu don tsayayyen hasken LED da aikace-aikacen hasken filasha mai sauƙi na LED | Voltage sarrafa 1-tashar aiki ga gajere, madaidaici da fitilun filasha masu ƙarfi na LED, madaidaicin filasha daga 1µs zuwa 100ms |
| Sauƙaƙe saitin LED na yanzu ta hanyar jujjuyawar juyawa | Sauƙaƙan saiti na tsawon filasha LED da na yau da kullun ta hanyar jujjuyawar juyawa |
| Madaidaicin walƙiya ta hanyar siginar 'bayyana' ko 'strobe' na kyamara ko saitin filasha ta hannu | |
Haɗin Wutar Lantarki
| Pin | CTR-50 aiki | CTR-51 aiki Sharhi | |
| 1 | 24V DC | Shigar da wutar lantarki | |
| 2 | GND | Ƙasar na'ura | |
| Pin | Aiki | Aiki | Sharhi |
| 3 | Dimmer 0V… 10V1)
0V= 0% na sel. halin yanzu 10V=100% na sel. halin yanzu |
Mai haɓaka tushen lokaci don juyawa juyi2)
Ƙasa: 10 - 90µs Ba a haɗa shi ba: 100 - 900µs 24V: 10.000 - 90.000µs |
Akan CTR-51 fil 3 yana da matsayi uku: an haɗa zuwa ƙasa, hagu mara haɗawa (buɗe) ko haɗa zuwa 24V. |
| 4 | Ƙarfafa 12-24V | ||
| 5 | Farashin GND | Ƙarƙashin ƙasa, keɓe | |
| 63) | Ƙaddamar da 5V - TTL | Ƙananan sigina <0.8V Babban siginar> 2.0V | |
| 7 | GND | Ground RS232, int. an haɗa zuwa na'urar GND | |
| 8 | RxD | Sami bayanai RS232 | |
| 9 | TXD | Saukewa: RS232 | |
| Pin | Waya4) | Waya4) | Fitowa zuwa haske |
| 105) | baki + blue | LED (-) | |
| 11 | fari + ruwan kasa | LED (+) | |
- Dimmer ya kashe ta hanyar tsohowar masana'anta. Ana buƙatar kunna ta hanyar RS232. Ba tare da haɗin kai zuwa fil 3 ba, lokacin da aka kunna dimmer, ƙarfin yana kama da 0V = 0% na zaɓin halin yanzu
- Ana iya saita mafi tsayin lokacin walƙiya ta hanyar RS232
- Shigar da kunditages sama da 5.5V zai lalata da'irar shigar da fararwa!
- don kebul na haɗin MBJ da hasken LED na MBJ (-x) ba tare da haɗakar mai sarrafawa ba
- KADA KA haɗi zuwa waje na wutar lantarki ko ƙasan siginar faɗakarwa! Wannan na iya lalata fitilu ko na'urori masu alaƙa.
Yanayin aiki
| Yanayin CTR-50 Yanayin Aiki CTR-51 Aiki | |||
| GASKIYA | Haske mai ci gaba, LED koyaushe yana kunne | - | babu tallafi don ci gaba
haske, yi amfani da CTR-50 |
| AUTO1) | LED-fitarwa yana biye da faɗakarwa | AUTO | LED-fitarwa yana biye da faɗakarwa |
| FLASH | Saitin hannu don walƙiya, jinkiri
da tsawon lokaci (ta hanyar RS232 kawai) |
FLASH2) | Flash-on-trigger tare da saita tsawon lokacin filasha (RS232) |
| KASHE | Fitilar LED a kashe | KASHE | Fitilar LED a kashe |
- Saitin masana'anta na CTR-50 na yanayin aiki shine AUTO. Ana iya zaɓar sauran hanyoyin aiki ta hanyar RS232 dubawa.
- Saitin masana'anta na CTR-51 na yanayin aiki shine FLASH. Ana iya zaɓar sauran hanyoyin aiki ta hanyar RS232 dubawa.
Gano tushen hasken
Bayan an kawo CTR da voltage, yana kasancewa a Yanayin Ganewa har sai an gano haske. Sannan CTR ya canza zuwa yanayin da aka zaɓa.
Aikace-aikacen SampLes don CTR mai sarrafa
Tsayayyen haske
Tsayayyen haske tare da sarrafa haske (CTR-50 kawai)
Saukewa: RS232
Serial dubawa yana ba da damar canza yanayin aiki da saitin lokaci-lokaci na kowane mutum da igiyoyi. An kwatanta umarnin sarrafawa a cikin wani littafin RS232 daban.
Juyawa Juyawa
Yi amfani da jujjuyawar jujjuyawar don saita ikon halin yanzu don LED mai haɗin gwiwa. Da fatan za a duba jagorar masana'anta hasken LED don tabbatar da cewa kar ku wuce matsakaicin matsakaicin na yanzu.
Juyin juyayi na sama
| Matsayi CTR-50 CTR-51 | ||
| LED matakan 1A na yanzu | Flash halin yanzu 2) | |
| 01) | 0A (zuwa 0.9A) | Sarrafa ta hanyar RS232 (0 - 30A) |
| 1 | 1A (zuwa 1.9A) | 1.0 A |
| 2 | 2A (zuwa 2.9A) | 1.5 A |
| 3 | 3A (zuwa 3.9A) | 2.1 A |
| 4 | 4A (zuwa 4.0A) | 3.1 A |
| 5 | 4.5 A | |
| 6 | 6.5 A | |
| 7 | 9.4 A | |
| 8 | 13.7 A | |
| 9 | 20.0 A | |
- CTR: 50: Idan duka jujjuyawar jujjuyawar an saita su zuwa '0', na yanzu shine 50mA, saitunan masana'anta na yanzu shine 50mA
- CTR-51: Saitin tsohuwar masana'anta shine 150mA.
Ƙarƙashin juyawa na juyawa
| Matsayi CTR-50 CTR-51 | ||||
| LED halin yanzu 0.1A matakai 1) | Lokacin Flash 2) | |||
| Pin 3 akan GND | Pin 3 - bude | Fin 3 akan 24V | ||
| 0 | da 0mA | Sarrafa ta hanyar RS232 (0 - 30A) | ||
| 1 | da 100mA | 10µs | 100µs | 1ms |
| … | … | … | … | … |
| 9 | da 900mA | 90µs | 900µs | 9ms |
- CTR-50: Idan duka jujjuyawar juyi an saita su zuwa '0', na yanzu shine 50mA, saitin masana'anta na yanzu shine 50mA
- CTR-51: Ana iya saita gajere da tsayin lokacin walƙiya (1µs - 100ms) ta hanyar RS232.
Hasken da aka kunna tare da fitowar NPN mai nitsewa (siginar bugun jini, mai buɗewa)
| Ƙayyadaddun bayanai Saukewa: CTR-50 | ||
| Sigar lantarki | ||
| Mai aiki Voltage | 24V DC / 4.5A
5V-26V, min. 2V sama da na gaba voltage na tushen hasken LED |
|
| LED tsayayye halin yanzu 1)
(Yanayin ON & AUTO) |
50mA… 4000mA | 150mA… 1000mA
(Yanayin AUTO kawai) |
| LED flash current2) | 50mA… 4000mA | 150mA… 30A |
| Tsawon lokacin walƙiya | 2ms dangane da wurin aiki na LED da zagayen aiki | 1µs dangane da wurin aiki na LED da zagayen aiki |
| Max. flash duration | 59s | |
| Max. latency flash3) | <500µs | <1µs |
| Tsawon lokacin Flash & jinkiri:
mafi ƙarami daidaitacce mataki |
10µs | 1µs |
| Voltage kewayon don LED
kayayyaki |
kusan 2.5V zuwa 22.0V | |
| Sigar inji | ||
| Girma (H x W x D) | 36mm x 80mm x 93mm | |
| Nauyi | 350 g | |
| Masu haɗawa | 2 Filogi lambar sadarwa (RM5.08), 7 Filogi lambar sadarwa (RM3.81), 2 Pin inv. Toshe lambar sadarwa (RM3.81) | |
| Takaddun shaida | CE, RoHS, EN61000-6-2, EN61000-6-4 | |
| Digiri na kariya | IP20 (wanda aka yi don sarrafawa) | |
| Danshi | 30% zuwa 70% | |
| Yanayin aiki | 10°C zuwa 30°C | |
| Na'urorin haɗi | Babban shirin hawan dogo da matosai (ikon isarwa). Don na USB, masu hawa da na'urorin haske da fatan za a duba www.mbj-imaging.com | |
- LED halin yanzu kasa da 100mA na iya haifar da jitter haske LED
- Ana samar da makamashin filasha ta capacitor kuma yana buƙatar isasshen lokaci don yin caji. Ƙarfin walƙiya (mitar filasha * lokacin walƙiya * na yanzu) yana iyakance ga 1A. Misali: 100 filasha/s * 100µs * 30A = 0.3A
- Mafi girma na halin yanzu da guntu lokacin zagayowar, mafi girma latency zai iya zama.
TTL ya jawo haske tare da tushen PNP (buɗe emitter)
MBJ Imaging GmbH
Jochim-Klindt-Strasse 7 49 41 02 77 89 0 - 31
22926 Ahrensburg, Jamus sales@mbj-imaging.com www.mbj-imaging.com
Mai Kula da Manual CTR50/51: Bita 05 - 18 Mai 2021. INDD file Rev09.
Takardu / Albarkatu
 | Saukewa: CTR-51 |
Magana
- Imaging.com na siyarwa | www.brandforce.comimaging.com
- MBJ - LED Beleuchtungen für industrielle Bildverarbeitungwww.mbj-imaging.com
- Manual mai amfanimanual.tools