MICROCOM 900M Intercom Umarnin Jagora

MICROCOM 900M Intercom Umarnin

GABATARWA

Mu a Pliant Technologies muna son gode muku da siyan kuasing MicroCom 900M. MicroCom 900M is a compact, economical wireless intercom system that operates in the 900MHz frequency band to provide excellent range and performance. The system features small, lightweight beltpacks and provides excellent sound quality, ease-of-use, and long-life battery operation. In order to get the most out of your new MicroCom 900M, please take a few moments to read this manual completely so that you better understand the operation of this product. This document applies to models PMC-900M and PMC-900M-AN*. For questions not addressed in this manual, feel free to contact the Pliant Technologies Customer Support Department using the information on page 9.

SIFFOFIN KIRKI

• Tsarin tashoshi ɗaya na tattalin arziki
• Sauƙi don aiki
• Har zuwa 5 cikakken masu amfani da duplex
• Masu amfani mara iyaka
• Masu amfani marasa iyaka
• 900MHz mitar band
• Fasahar FHSS da aka ɓoye
• Karami da nauyi
• Gina mai jure ruwa
• Kimanin Rayuwar baturi na awa 8
• Ƙananan jinkiri (kasa da 35 ms)

ME YA HADA DA MICROCOM 900M?

• Holster
• Lanyard
• Kebul na Caji
• Jagoran Fara Mai Sauri
• Katin Rijistar Samfura

KASHI NA'URA

Lambar Sashe	Bayani
MicroCom na'urorin haɗi
PAC-USB6-CHG	MicroCom 6-Port USB Caja
Saukewa: ACC-USB2-CHG	2-Port USB Cajin Mota
PAC-MC-SFTCASE	MicroCom Soft Travel Case
PAC-MCXR-5CASE	Abubuwan da aka bayar na MicroCom Hard Travel Case
Saukewa: CAB-4F-DMG	MicroCom zuwa AD903 DMG zuwa XLR Cable
BT-11	Maye gurbin Batirin Li-Ion
Naúrar kai
Saukewa: PHS-SB11LE-DMG	SmartBoom® LITE Single Ear Pliant lasifikan kai tare da Dual Mini connector don MicroCom
Saukewa: PHS-SB110E-DMG	SmartBoom PRO Single Ear Pliant lasifikan kai tare da Dual Mini connector don MicroCom
Saukewa: PHS-SB210E-DMG	DMG: SmartBoom PRO Dual Ear Pliant lasifikan kai tare da Dual Mini connector don MicroCom
PHS-IEL-M	MicroCom na'urar kai ta cikin kunne, kunne ɗaya, hagu kawai
PHS-IER-M	MicroCom na'urar kai ta kunne, kunne ɗaya, dama kawai
PHS-IELPTT-M	MicroCom in-ji na kai tare da maɓallin tura-zuwa magana (PTT), kunne ɗaya, hagu kawai
PHS-LAV-DM	MicroCom lavalier microphone da eartube
PHS-LAVPTT-DM	MicroCom lavalier makirufo da eartube tare da maɓallin PTT

MULKI

NUNA NUNA

SATA

1. Haɗa na'urar kai zuwa jakar bel. Haɗin lasifikan kai na belpack yana goyan bayan mini minin naúrar kai guda biyu da guda ɗaya. Za'a iya shigar da masu haɗa minin guda biyu a kowace hanya. Za'a iya shigar da ƙananan haši guda ɗaya a kowane tashar jiragen ruwa na haɗin kai.
2. A kunne Latsa ka riƙe maɓallin POWER na daƙiƙa uku (3), har sai allon ya kunna.
3. Zaɓi Ƙungiya. Latsa ka riƙe maɓallin MODE na tsawon daƙiƙa 3, har sai alamar “GRP” tana kiftawa akan LCD. Sannan, yi amfani da maɓallan VOLUME +/- don zaɓar lambar ƙungiya daga 0-51 (ko 0-24 don ƙirar PMC-900M-AN). Short-latsa MODE don adana zaɓinku kuma ci gaba zuwa saitin ID.
   1. Muhimmi: Beltpacks dole ne su sami lambar rukuni ɗaya don sadarwa.
4. Zaɓi ID. Lokacin da "ID" ya fara kiftawa akan LCD, yi amfani da maɓallan VOLUME +/- don zaɓar lambar ID ta musamman. Latsa ka riƙe MODE don ajiye zaɓinka kuma fita menu.

• Fakitin ID suna daga 00-04.
• Fakiti ɗaya dole ne koyaushe yayi amfani da ID na “00” kuma yayi aiki azaman babban fakitin don aikin tsarin da ya dace. "MR" yana ƙaddamar da babban fakitin akan LCD ɗin sa.
• Fakitin saurare kawai dole ne su yi amfani da ID na “L”. Kuna iya kwafin ID “L” akan fakitin bel da yawa idan kafa masu amfani kawai. (Dubi "Zaɓin Yanayin Karɓa" a shafi na 6 don ƙarin bayani game da wannan tsari.)
• Abubuwan bel ɗin da aka raba Talk dole ne su yi amfani da ID na "Sh". Kuna iya kwafin ID "Sh" akan bel ɗin bel da yawa idan kun kafa masu amfani da aka raba. Koyaya, ba za a iya amfani da ID na "Sh" a lokaci guda da ID ɗin cikakken duplex na ƙarshe ("04").

BATIRI

An shigar da baturin lithium-ion mai caji a cikin na'urar. Toshe kebul na cajin USB cikin tashar USB don cajin baturi. Ledojin cajin da ke saman kusurwar dama na na'urar zai haskaka ja mai ƙarfi yayin da baturin ke caji kuma zai kashe da zarar baturi ya cika. Lokacin cajin baturi kusan awanni 3.5 daga komai. Ana iya amfani da jakar bel yayin caji, amma yin hakan na iya ƙara lokacin cajin baturi.

AIKI

• Magana - Yi amfani da MAGANA maɓallin don kunna ko kashe magana don na'urar. Wannan maɓallin yana canzawa tare da latsa guda ɗaya, gajeriyar latsa. "TK" yana bayyana akan LCD lokacin da aka kunna.
  » Ga masu amfani da duplex, yi amfani da guda ɗaya, gajeriyar latsa don kunna magana da kashewa.
  » Ga masu amfani da Taɗi na Raba ("Sh"), danna ka riƙe yayin magana don kunna ta don na'urar. (Mai amfani da Taɗi Taɗi ɗaya kaɗai zai iya magana a lokaci ɗaya.)
• Ƙara girma da ƙasa - Yi amfani da maɓallan + da - don sarrafa ƙarar. "VOL" da ƙimar lamba daga 00-09 suna bayyana akan LCD lokacin da aka daidaita ƙarar.
• Yanayin LED -
  »Talk/Hagu LED LED shuɗi ne kuma yana kiftawa sau biyu idan an shiga ciki da ƙifta ɗaya idan an fita.
  » Cajin LED na hannun dama yana ja lokacin da batir yayi ƙasa kuma shima ja yayin caji yana ci gaba. LED yana kashe lokacin da caji ya cika.

AMFANI DA TSARIN MICROCOM MASU YAWA A WURI DAYA

Kowane tsarin MicroCom daban ya kamata yayi amfani da rukuni ɗaya don duk belpacks a cikin wannan tsarin. Pliant yana ba da shawarar cewa tsarin da ke aiki kusa da juna su saita Ƙungiyoyin su don zama aƙalla ƙima goma (10). Domin misaliample, idan tsarin ɗaya yana amfani da Rukunin 03, wani tsarin da ke kusa ya kamata ya yi amfani da Rukunin 13.

MATSAYIN MENU

Ana iya daidaita saitunan masu zuwa daga menu na belpack. Don samun dama ga menu, danna ka riƙe MODE maɓalli na daƙiƙa 3, har sai alamar “GRP” tana ƙyalli akan LCD. Sa'an nan, short-latsa da MODE maballin ƙayyadadden adadin lokuta don samun damar saitin da kuke son canzawa. Da zarar kun gama canje-canjenku, danna ka riƙe MODE don ajiye zaɓinku kuma fita daga menu.

• Kunna/Kashe Sidetone - Sidetone yana ba ku damar jin kanku yayin magana. Mahalli masu ƙarfi na iya buƙatar ku ƙara sautin gefen ku.
  » Don daidaita sautin gefe, shiga menu na belpack, sannan danna maɓallin MODE button sau biyu. Lokacin da ƙimar “S_” ke kiftawa akan LCD, yi amfani da KYAUTA +/- maɓallai don zaɓar wani zaɓi daga S0-S5.
  »"S0" an kashe. Alamar da ke cikin Hoto 4 zata bayyana a saman dama na allon bel ɗin lokacin da Sidetone ya kashe. "S1" shine mafi ƙarancin matakin gefen gefen. "S5" shine mafi girma.
  » Saitin sautin tsoho shine "S3."
• Zaɓin Yanayin Karɓa - Wannan saitin yana ba ku damar saita jakar bel ɗin zuwa cikakken yanayin duplex (duka karba da watsawa) ko saita shi don karɓa kawai (watau saurare kawai, wanda ke hana aikin magana na bel ɗin).
  » Don canza saitin yanayin karɓa, shiga menu na belpack, sannan danna maɓallin MODE button sau uku (3). Lokacin da ƙimar "P_" ke ƙyalli akan LCD, yi amfani da KYAUTA +/- maɓallan don zaɓar tsakanin "PO" da "PF."
  » "PO" cikakke ne na duplex (duka karba da watsawa). Ana iya amfani da wannan yanayin kawai tare da fakitin ID 00-04.
  » "PF" ana karɓa kawai (watau saurare kawai). Ana iya amfani da wannan yanayin tare da kowane fakitin ID, amma idan kuna son saita masu amfani da saurare kawai, kuna iya yin haka ta maimaita ID “L” kamar yadda ake buƙata, da saita kowane fakitin zuwa yanayin “PF”. Wannan keɓanta ne ga ƙa'idar cewa duk belpacks dole ne su sami lambar ID ta musamman.
  » Saitin yanayin tsoho shine "PO."

Sarrafa Matsayin Hannun Marufo

Saita hankalin makirufo bisa yanayin yanayin ku da iyawar naúrar kai. Wurare masu ƙarfi na iya buƙatar ka rage hankalin mic, yayin da mafi ƙarancin yanayi na iya buƙatar ka ƙara shi.

• Don daidaita saitin hankalin mic, shiga menu na belpack, sannan danna maɓallin MODE button sau hudu (4). Lokacin da ƙimar “C_” ke kiftawa akan LCD, yi amfani da KYAUTA +/- maɓallan don zaɓar wani zaɓi daga C1-C5.
• "C1" shine mafi ƙarancin matakin hankali. "C5" shine mafi girma.
• Tsohuwar saitin matakin ji na makirufo shine "C1."

Fitowar Sauti Mai Girma/Ƙasa

Ana ba da shawarar fitar da sauti mafi girma don wurare masu ƙarfi. Canza saitin fitarwa a nan yana haifar da karuwa ko raguwar 3 dB.

• Don canza saitin fitar da sauti, shiga menu na belpack, sannan danna maɓallin MODE sau biyar (5). Lokacin da ƙimar "U_" ke ƙyalli akan LCD, yi amfani da maɓallan VOLUME +/- don zaɓar tsakanin "UL" da "UH."
• “UL” yana da ƙarancin fitowar sauti. "UH" yana da babban fitarwar sauti.
• Saitin fitarwa na sauti na tsoho shine "UH" (mai girma fitarwa na sauti).

ZABEN MENU

Saitin Menu	Zabuka	Bayani
Sidetone	S0 S1, S2, S3*, S4, S5	Sidetone Kashe Matakan Sidetone 1–5
Yanayin Karɓa	PO* PF	Yanayin Karɓa da Watsawa Yanayin Karɓa-Kawai (Sauraron-Kawai)
Matakan Hannun mic	C1*, C2, C3, C4, C5	Matakan Hankali na Mic 1-5
Matsayin Fitar Sauti	UL UH*	Sautin Sauti Mai Sauti Mai Girma

SHAWARWARIN TSABARIN TA HANYAR KAI

Tebu mai zuwa yana ba da shawarar saitunan MicroCom don samfuran na'urar kai da yawa gama gari.

Samfurin lasifikan kai	Nasiha Saita
	Matakan Hannun mic	Matsayin Fitar Sauti
Naúrar kai tare da ƙarar ƙararrawa	C1	UH
Naúrar kai tare da lavalier mic	C3	UH

Yi amfani da zane na wayoyi don haɗin TRRS na belpack idan kun zaɓi haɗa naku belun kunne. Bias na makirufo voltage kewayon an sauke 1.9V DC da 1.3V DC lodi.

BAYANIN NA'URARA

Musammantawa *	PMC-900M	PMC-900M-AN**
Nau'in Mitar Rediyo	ISM 902-928 MHz	ISM 915-928 MHz
Haɗin Rediyo	ISM 900 MHz: FSK Modulation tare da Mitar Hopping
Codec na murya	16 bit / 16 kHz
Tx Max Ƙarfin fitarwa	100mW ku
Hankalin Rx	-95 dBm
Latency Voice	<35 ms
Tashoshi masu yawan gaske	78 tashoshi
Tazarar tasha	2 MHz
Adadin Bayanai	2 Mbps
Nau'in Baturi	Mai caji 3.7 V, 1,100mA Li-ion kafaffen baturi
Rayuwar Baturi	Kimanin 8 hours
Matsakaicin Amfani da Wuta	10mA a Class 1 (100mW)
Nau'in Caji	USB Micro, 5V 1-2A
Amsa Mitar	50 Hz - 7 kHz
Matsakaicin Cikakkun Masu Amfani Duplex	5
Girma / Weight	98 mm (H) x 49 mm (W) x 17 mm (D) / 88g
Nunawa	LCD kashi 7

• Sanarwa game da ƙayyadaddun bayanai: Yayin da Pliant Technologies ke yin kowane ƙoƙari na kiyaye daidaiton bayanan da ke ƙunshe a cikin littattafan samfurin sa, wannan bayanin yana iya canzawa ba tare da sanarwa ba. Ƙayyadaddun ayyuka da aka haɗa a cikin wannan jagorar sune ƙayyadaddun ƙayyadaddun ƙira kuma an haɗa su don jagorancin abokin ciniki da kuma sauƙaƙe shigarwar tsarin. Ayyukan aiki na gaske na iya bambanta. Mai ƙira ya tanadi haƙƙin canza ƙayyadaddun bayanai don nuna sabbin canje-canje a fasaha da haɓakawa a kowane lokaci ba tare da sanarwa ba.
• An amince da PMC-900M-AN don amfani a Ostiraliya da New Zealand kuma yana aiki a cikin kewayon mitar 915-928 MHz.

KULA DA ABUBA DA KIYAYEWA

Tsaftace ta amfani da taushi, damp zane.
HANKALI: Kada a yi amfani da masu tsaftacewa waɗanda ke ɗauke da kaushi. Ka kiyaye ruwa da abubuwa na waje daga buɗe na'urar. Idan samfurin ya fallasa ga ruwan sama, a hankali a shafe duk saman, igiyoyi, da haɗin kebul da wuri-wuri kuma ba da damar naúrar ta bushe kafin adanawa.

TAIMAKON KYAUTATA

Pliant Technologies tana ba da tallafin fasaha ta waya da imel daga 07:00 zuwa 19:00 Tsakiyar Lokaci (UTC-06:00), Litinin zuwa Juma'a. 1.844.475.4268 ko +1.334.321.1160 fasaha.support@plianttechnologies.com Ziyarci www.plianttechnologies.com don tallafin samfur, takardu, da taɗi kai tsaye don taimako. (Tattaunawa kai tsaye akwai 08:00 zuwa 17:00 Tsakiyar Lokaci (UTC-06:00), Litinin zuwa Juma'a.)

KAYAN MAYARWA DOMIN GYARA KO GYARA

Duk tambayoyi da/ko buƙatun lambar izinin Komawa yakamata a tura su sashin Sabis na Abokin Ciniki (abokin ciniki.service@plianttechnologies.com). Kar a mayar da kowane kayan aiki kai tsaye zuwa masana'anta ba tare da fara samun Lamban Izini na Komawa (RMA) ba. Samun lambar izini na kayan dawowa zai tabbatar da cewa ana sarrafa kayan aikin ku cikin sauri. Duk jigilar kayayyakin Pliant yakamata a yi ta UPS, ko mafi kyawun jigilar kaya, wanda aka riga aka biya da inshora. Ya kamata a aika da kayan aiki a cikin kwandon tattarawa na asali; idan hakan bai samu ba, yi amfani da duk wani akwati da ya dace wanda ke da tsauri kuma yana da isasshen girman don kewaye kayan aiki tare da aƙalla inci huɗu na abu mai ɗaukar girgiza. Dole ne a aika duk jigilar kaya zuwa adireshin da ke gaba kuma dole ne ya haɗa da Lamba Izinin Komawa: Pliant Technologies Sashen Sabis na Abokin Ciniki Attn: Izinin Material # 205 Technology Parkway Auburn, AL USA 36830-0500

BAYANIN LASIS

BAYANIN KIYAYEWA FCC MICROCOM™ FCC FASAHA

• 00004130 (FCCID: YJH-MC-11)
• 00004130-B da 00004303 (FCCID: YJH-MCS-900)

An gwada wannan kayan aikin kuma an same shi don yin aiki da iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga kutsawa mai cutarwa a cikin shigarwar mazaunin. Wannan kayan aiki yana haifarwa, yana amfani da kuma zai iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma akayi amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aiki ya haifar da tsangwama mai cutarwa ga rediyo ko liyafar talabijin, wanda za'a iya tantance shi ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara kutse ta ɗayan matakan masu zuwa:

• Sake daidaitawa ko matsar da eriya mai karɓa.
• Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
• Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
• Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

HANKALI
Canje-canjen da ƙungiyar da ke da alhakin aiwatarwa ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.

Bayanin Yarda da FCC

Wannan na'urar ta bi Sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma
2. dole ne wannan na'urar ta karɓi duk wani tsangwama da aka samu, gami da tsangwama wanda zai iya haifar da aiki maras so.

MUHIMMAN NOTE

Bayanin Bayyanar Radiation na FCC RF: Wannan kayan aikin ya dace da iyakokin fiddawa na FCC RF wanda aka tsara don muhalli mara sarrafawa. Dole ne a shigar da eriya da ake amfani da ita don wannan mai watsawa don samar da nisa na aƙalla mm 5 daga duk mutane kuma dole ne a kasance tare da su ko aiki tare da kowane eriya ko mai watsawa.

BAYANIN KIYAYEWA KANADA

Wannan na'urar tana ƙunshe da masu watsawa/masu karɓa (s) waɗanda ba su da lasisi waɗanda ke bin Innovation, Science and Development Tattalin Arziki RSS(s) waɗanda ba su da lasisin Kanada. (Musamman RSS 247 Fitowa ta 2 (2017-02) da RSS-GEN fitowar 5 (2018-04) Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. Wannan na'urar bazai haifar da tsangwama ba.
2. Dole ne wannan na'urar ta karɓi kowane tsangwama, gami da tsangwama wanda zai iya haifar da aikin da ba a so na na'urar.

MAGANAR WARRANTI PLIANT

GARANTI MAI KYAU

Dangane da sharuɗɗan wannan Garanti mai iyaka, samfuran CrewCom da MicroCom suna da garantin samun yanci daga lahani a cikin kayan aiki da aiki na tsawon shekaru biyu daga ranar siyarwa zuwa mai amfani da ƙarshe, ƙarƙashin sharuɗɗan masu zuwa.

• Shekarar farko na garanti ya haɗa tare da sayan.
• Shekara ta biyu na garanti yana buƙatar rajistar samfur akan Pliant web site. Yi rijistar samfurin ku anan: https://plianttechnologies.com/product-registration/ Dangane da sharuɗɗan wannan Garanti mai iyaka, samfuran ƙwararrun Tempest® suna ɗaukar garantin samfur na shekaru biyu. Dangane da sharuɗɗan wannan Garanti mai iyaka, duk naúrar kai da na'urorin haɗi (ciki har da batura masu alamar Pliant) suna ɗaukar garanti na shekara ɗaya. An ƙayyade ranar siyarwa ta ranar daftari daga dila mai izini ko mai rarrabawa mai izini ga mai amfani na ƙarshe.

Iyakar abin da ya wajaba na Pliant Technologies, LLC a lokacin garanti shine samar da, ba tare da caji ba, sassa da aikin da suka wajaba don magance lahani da ke bayyana a cikin samfuran da aka dawo da aka riga aka biya zuwa Pliant Technologies, LLC. Wannan garantin baya ɗaukar kowane lahani, rashin aiki, ko gazawar da ke haifar da yanayi sama da ikon Pliant Technologies, LLC, gami da amma ba'a iyakance ga aikin sakaci ba, cin zarafi, haɗari, gazawar bin umarni a cikin Manual ɗin Aiki, nakasa ko kayan aikin da ba su dace ba. , ƙoƙarin gyarawa da/ko gyara ba izini ta Pliant Technologies, LLC, da lalacewar jigilar kaya. Sai dai idan dokar jihar ta ba da in ba haka ba, Pliant Technologies yana ƙara wannan iyakataccen garanti ga mai amfani kawai wanda ya fara siyan wannan samfur daga dila mai izini ko mai rarrabawa mai izini. Pliant Technologies baya ƙaddamar da wannan garanti ga kowane mai shi ko wani mai canja wurin samfurin. Wannan garantin yana aiki ne kawai idan ainihin shaidar sayan da aka bayar ga mai siye ta asali ta dila mai izini ko mai rarrabawa mai izini, yana ƙayyadadden ranar siyan, da lambar serial, inda ya dace, an gabatar da samfurin da za a gyara. Pliant Technologies tana da haƙƙin ƙin sabis na garanti idan ba a bayar da wannan bayanin ba ko kuma idan an cire serial lambobin samfur ko kuma an lalata su.Wannan iyakataccen garanti shine keɓaɓɓen garanti na keɓaɓɓen da aka bayar dangane da samfuran Pliant Technologies, LLC. Alhakin mai amfani ne don tantance kafin siyan cewa wannan samfurin ya dace da manufar mai amfani. KOWANE DA DUKAN GARANTIN DA AKE NUFI, HADA DA WARRANTI MAI KYAUTA, ANA IYA IYAKA GA WUTA NA WANNAN GORANTI KENAN. BABU PLIANT TECHNOLOGIES, LLC KO WANI MAI SAUKI MAI izni wanda ya siyar da KAYAN SANARWA NA INTERCOM WANDA YAKE DA ALHAKIN GASKIYA KO WATA LALACEWA KO WANI IRIN LALACEWA.

Garanti mai iyaka

Sassan maye gurbin na Pliant Technologies, samfuran LLC suna da garantin samun yanci daga lahani a cikin kayan aiki da aiki na kwanaki 120 daga ranar siyarwa zuwa mai amfani na ƙarshe. Wannan garantin baya ɗaukar kowane lahani, rashin aiki, ko gazawar da ke haifar da yanayi sama da ikon Pliant Technologies, LLC, gami da amma ba'a iyakance ga aikin sakaci ba, cin zarafi, haɗari, gazawar bin umarni a cikin Manual ɗin Aiki, nakasa ko kayan aikin da ba su dace ba. , ƙoƙarin gyarawa da/ko gyara ba izini ta Pliant Technologies, LLC, da lalacewar jigilar kaya. Duk wani lahani da aka yi ga ɓangaren musanya yayin shigarsa ya ɓata garantin ɓangaren maye. Wannan garanti mai iyaka shine keɓaɓɓen garanti na keɓaɓɓen da aka bayar dangane da samfuran Pliant Technologies, LLC. Alhakin mai amfani ne don tantance kafin siyan cewa wannan samfurin ya dace da manufar mai amfani. KOWANE DA DUKAN GARANTIN DA AKE NUFI, HADA DA WARRANTI MAI KYAUTA, ANA IYA IYAKA GA WUTA NA WANNAN GORANTI KENAN. BABU PLIANT TECHNOLOGIES, LLC KO WANI MAI SAUKI MAI izni wanda ya siyar da KAYAYYAR ƙwararriyar ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren Ɗinkin Ɗinkin Duniya (AP) ta bayar da tantacewar ta. Wannan garantin baya ɗaukar kowane lahani, rashin aiki, ko gazawar da ke haifar da yanayi sama da ikon Pliant Technologies, LLC, gami da amma ba'a iyakance ga aikin sakaci ba, cin zarafi, haɗari, gazawar bin umarni a cikin Manual ɗin Aiki, nakasa ko kayan aikin da ba su dace ba. , ƙoƙarin gyarawa da/ko gyara ba izini ta Pliant Technologies, LLC, da lalacewar jigilar kaya. Duk wani lahani da aka yi ga ɓangaren sauyawa yayin shigarwa ya ɓata garantin ɓangaren sauyawa. Wannan garanti mai iyaka shine keɓaɓɓen garanti na keɓaɓɓen da aka bayar dangane da samfuran Pliant Technologies, LLC. Alhakin mai amfani ne don tantance kafin siyan cewa wannan samfurin ya dace da manufar mai amfani. KOWANE DA DUKAN GARANTIN DA AKE NUFI, HADA DA WARRANTI MAI KYAUTA, ANA IYA IYAKA GA WUTA NA WANNAN GORANTI KENAN. BABU PLIANT TECHNOLOGIES, LLC KO WANI MAI SAUKI MAI izni wanda ya siyar da KAYAYYAR ƙwararriyar ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren ƙwararren Ɗinkin Ɗinkin Duniya (AP) ta bayar da tantacewar ta.

COPYRIGHT © 2022 Pliant Technologies, LLC. An kiyaye duk haƙƙoƙi. Pliant®, MicroCom®, da Pliant “P” alamun kasuwanci ne masu rijista na Pliant Technologies, LLC. Duk sauran alamun kasuwanci mallakin masu su ne. Maganar Takardun: D0000511_J Pliant Technologies, LLC 205 Technology Parkway Auburn, Alabama 36830 Wayar Amurka +1.334.321.1160 Toll-Free 1.844.475.4268 ko 1.844.4PLIANT Fax +1.334.321.1162 www.plianttechnologies.com