Mircom MIX-5351AP Advanced Protocol Intelligent Programmable Temperature Sensors

BAYANI

• Mai aiki Voltage Range: 15 zuwa 32 Volts DC Peak
• Aiki A halin yanzu @ 24 VDC: 200 uA (sadar da sadarwa ɗaya kowane daƙiƙa 5 tare da koren LED kiftawa akan sadarwa)
• Matsakaicin Ƙararrawa Yanzu: 2 mA @ 24 VDC (sadar da sadarwa ɗaya kowane daƙiƙa 5 tare da jan LED mai ƙarfi a kunne)
• Matsakaicin Yanzu: 4.5mA @ 24 VDC (sadarwa ɗaya kowane daƙiƙa 5 tare da amber LED mai ƙarfi a kunne)
• Rage Aikin Humidity: 10% zuwa 93% Dangantakar Humidity, Mara takurawa
• Zazzabi na shigarwa: Saita don ƙayyadaddun zafin jiki ko ƙimar-tashi (ROR): -4°F zuwa 115°F (-20°C zuwa 47°C)
• Saita don zafi mai zafi: -4°F zuwa 150°F (-20°C zuwa 66°C)
• Kafaffen Ƙimar Zazzabi: 135F (57°C)
• Ma'aunin Zafi Mai Girma: 190F (88°C)
• Ƙimar-Na Gano Tashi: Yana amsa sama da 15°F/minti ko 135°F (8.3°C/minti ko 57°C)
• Tsayi: 2.0 (51 mm) shigar a cikin B300-6 Base
• Diamita: 6.2 (156 mm) shigar a cikin B300-6 Base
• Nauyi: 3.4oz. (95 g)

UL 521 da aka jera don Masu Gano Heat
Dole ne a shigar da wannan firikwensin daidai da tsarin shigar da tsarin kula da tsarin. Dole ne shigarwa ya cika buƙatun Hukunce-hukuncen Shari'a (AHJ). Na'urori masu auna firikwensin suna ba da mafi girman aiki lokacin shigar da su cikin yarda da Ƙungiyar Kariyar Wuta ta Ƙasa (NFPA); duba NFPA 72.
Kafin shigar da na'urori masu auna firikwensin, da fatan za a karanta tsarin wiring da shigarwa na manual sosai. Wannan jagorar tana ba da cikakkun bayanai game da tazarar firikwensin, sanyawa, yanki, da aikace-aikace na musamman. Ana samun kwafin waɗannan littafan daga Mircom.

BAYANI BAYANI

Samfuran MIX-5351AP, MIX-5351RAP, da MIX-5351HAP sune na'urori masu auna firikwensin fasaha waɗanda ke amfani da na'urar gano yanayin zafin jiki na zamani don amsa da sauri. An tsara waɗannan na'urori masu auna firikwensin don samar da kariya ta wuri mai buɗewa tare da damar tazara mai ƙafa 50 kamar yadda UL 521 ta amince da shi. Za a iya tsara firikwensin zafin jiki mai hankali azaman na'urar firikwensin zafin jiki na 135°F, ƙimar tashi da 135°F ƙayyadadden firikwensin zafin jiki ko babban firikwensin zafin jiki na 190°F ta cikin Ƙungiyar Kula da Ƙararrawa ta Wuta (FACP).
LEDs biyu akan kowane firikwensin firikwensin don samar da nunin firikwensin gida, bayyane. Ana samun damar annunciator LED mai nisa azaman kayan haɗi na zaɓi (Sashe No. RA100Z). Ana ba da maɓallan bugun kira na rotary don saita adireshin firikwensin. (Dubi Hoto na 1.)

HOTO 1. RUWAN ADRESHIN JUYA

Ƙungiyoyin Mircom suna ba da saitunan fasali daban-daban a cikin nau'i daban-daban. A matsayin sake-sake, wasu fasalulluka na na'urori masu auna zafin jiki na shirye-shirye na hankali na iya samuwa akan wasu bangarorin sarrafawa, amma ba akan wasu ba. MIX-5351AP, MIX-5351RAP, da MIX-5351HAP suna goyan bayan Advanced Protocol da CLIP (Clas-sic Loop Interface Protocol).
Abubuwan da za a iya samu idan kwamitin kulawa ya goyan bayan sun haɗa da:

1. LEDs na firikwensin na iya aiki ta hanyoyi uku-a kunne, kashewa, da kiftawa-kuma ana iya saita su zuwa ja, koren, ko amber. Kwamitin yana sarrafa wannan.
2. Za a iya daidaita fitarwar nesa zuwa aikin LED ko sarrafa mai zaman kansa daga LEDs. Da fatan za a koma zuwa littafin aiki don rukunin sarrafawa da aka jera na UL don takamaiman aiki na waɗannan samfuran
3. Ana iya magance na'urori har zuwa adireshi 159.
4. Na'urar firikwensin zafi yana aiki azaman mai gano zafi mai shirye-shirye.
   NOTE: A cikin bangarori inda wannan fasalin ba ya samuwa, MIX-5351AP za ta tsohuwa zuwa madaidaicin mai gano zafi 135°F. MIX-5351RAP za ta tsohuwa zuwa 135°F kafaffen na'urar gano zafi da ƙimar-tashi. MIX-5351HAP zai zama tsoho zuwa 190°F mai gano zafi mai zafi.

ƙwararrun firikwensin zafin jiki na shirye-shirye suna buƙatar sadarwa mai dacewa don aiki da kyau. Haɗa waɗannan na'urori masu auna firikwensin zuwa jeri-nau'i-mai jituwa-mai iya sarrafawa kawai.

JAGORAN FARKO

Dole ne a shigar da duk wayoyi bisa ga ka'idar Lantarki ta Ƙasa, lambobi masu dacewa da kuma Hukuma mai Iko. Ya kamata a yi amfani da ma'aunin waya daidai. Wayoyin shigarwa yakamata su kasance masu launi don iyakance kurakuran wayoyi da sauƙaƙa matsala na tsarin. Haɗin da ba daidai ba zai hana tsarin amsawa da kyau a yayin da wuta ta tashi.
Cire wuta daga layin sadarwa kafin shigar da firikwensin.

1. Waya tushen firikwensin (wanda aka kawo shi daban) kamar yadda aka nuna a zanen wayoyi. (Dubi Hoto na 2.)
2. Saita adireshin da ake so akan jujjuyawar bugun bugun kira. (Duba Hoto na 1.).
3. Shigar da firikwensin a cikin tushen firikwensin. Tura firikwensin cikin gindi yayin juya shi a agogon hannu don tabbatar da shi a wurin.
4. Bayan an shigar da duk na'urori masu auna firikwensin, yi amfani da wutar lantarki zuwa sashin sarrafawa kuma kunna layin sadarwa.
5. Gwada firikwensin (s) kamar yadda aka bayyana a sashin gwaji na wannan jagorar.

HOTO 2. TSARI NA WIRING

TAMPJuriya

Na'urori masu auna zafin jiki na fasaha sun haɗa da aamper-resistant ca-pability wanda ke hana cirewa daga tushe ba tare da amfani da kayan aiki ba. Koma zuwa littafin tushe don cikakkun bayanai kan yin amfani da wannan damar.

GWADA

Kafin gwaji, sanar da hukumomin da suka dace cewa tsarin yana ci gaba da aiki, kuma zai ƙare na ɗan lokaci. Kashe tsarin don hana ƙararrawa maras so.
Dole ne a gwada duk na'urori masu auna firikwensin bayan shigarwa da kuma lokaci-lokaci bayan haka. Dole ne hanyoyin gwajin gwaji su gamsar da Hukumar Samun Iko (AHJ). Na'urori masu auna firikwensin suna ba da mafi girman aiki lokacin da aka gwada su kuma ana kiyaye su cikin yarda da NFPA 72.

• A. Gwaji Magnet (Model No. M02-04 - na zaɓi)
  • Sanya magnet ɗin zaɓi na zaɓi akan murfin a cikin wurin gwajin maganadisu, kamar yadda aka nuna a hoto 3, don kunna fasalin gwajin.
  • LEDs yakamata su kunna cikin daƙiƙa 10, suna nuna ƙararrawa da sanar da kwamitin.
  • Sake saita mai ganowa a sashin kula da tsarin.
• B. Hanyar zafi kai tsaye (Mai busar gashi na 1000 - 1500 watts)
  •  Daga gefen mai ganowa, karkatar da zafi zuwa firikwensin. Riƙe tushen zafi kamar inci 6 (15 cm) nesa da shi don hana lalacewar murfin yayin gwaji.
  •  LEDs akan na'urar ganowa yakamata suyi haske lokacin da zafin jiki a wurin ganowa ya kai wurin saita ƙararrawa. Idan LEDs sun kasa yin haske, duba wutar lantarki ga mai ganowa da wayoyi a gindin ganowa.
  •  Sake saita mai ganowa a sashin kula da tsarin.
    Masu gano waɗanda suka fadi waɗannan gwaje-gwajen na iya buƙatar tsaftace su kamar yadda aka bayyana a ƙarƙashin CLEANING da sake gwadawa.

TSAFTA

Kafin cire na'urar ganowa, sanar da hukumomin da suka dace cewa tsarin gano hayaki yana ci gaba da aiki kuma zai daina aiki na ɗan lokaci.
Kashe yanki ko tsarin da ke gudana don hana ƙararrawa maras so.

1. Cire firikwensin don tsaftacewa daga tsarin.
2. Yi amfani da injin tsabtace ruwa ko matsewar iska don cire ƙura da tarkace daga wurin ji.
3. Sake shigar da ganowa.
4. Gwada ganowa kamar yadda aka bayyana a cikin GWAJI.
5. Sake haɗa hanyoyin da aka kashe.
6. Sanar da hukumomin da suka dace cewa tsarin ya dawo kan layi.

FARUWA FM
Kimar RTI don shigarwa ne waɗanda dole ne su bi FM 3210.

135°F Kafaffen RTI:	AZUMI
Yawan Tashi/135°F Kafaffen RTI:	V2-SAURI
190°F Kafaffen RTI:	SAURI

HOTO NA 3. SIFFOFIN ZAFI Mai Ganowa

 

HOTO 4. TSARE MAI GANO ZAFI

BAYANIN FCC

Wannan na'urar ta bi sashe na 15 na Dokokin FCC. Aiki yana ƙarƙashin sharuɗɗa biyu masu zuwa: (1) Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma (2) dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.
NOTE: An gwada wannan kayan aikin kuma an same shi don biyan iyakoki don na'urar dijital ta Class B, bisa ga Sashe na 15 na Dokokin FCC. An ƙirƙira waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifarwa, yana amfani da kuma zai iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma akayi amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye daga cikin waɗannan matakan:

• Sake daidaitawa ko matsar da eriya mai karɓa.
• Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
• Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
• Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

TSARON NA'URARA DA TSARO
Kafin shigar da wannan samfurin tabbatar da cewa tamper hatimi akan marufi yana nan kuma ba a karye ba kuma samfurin bai kasance tamptare da barin factory. Kar a shigar da wannan samfurin idan akwai alamun tampyin magana. Idan akwai alamun tampya kamata a mayar da samfurin zuwa wurin siyan.
Yana da alhakin mai tsarin don tabbatar da cewa duk abubuwan da aka gyara tsarin, watau na'urori, panels, wiring da dai sauransu, an kiyaye su sosai don guje wa tampƙin tsarin da zai iya haifar da bayyanar da bayanai, ɓarna, da cin zarafi.

KARIN BAYANI
Don Ƙayyadaddun Tsarin Ƙararrawa na Wuta, da fatan za a je:
http://www.systemsensor.com/en-us/Documents/I56-1558.pdf

Iyakance Tsarin Ƙararrawar Wuta

firealarmresources.com

Takardu / Albarkatu

Mircom MIX-5351AP Advanced Protocol Intelligent Programmable Temperature Sensors [pdf] Jagoran Jagora MIX-5351AP Advanced Protocol Intelligent Programmable Temperature Sensors, MIX-5351AP, Advanced Protocol Intelligent Programmeable Temperature Sensors, Protocol Intelligent Programmable Temperature Sensors, Intelligent Programmable Temperature Sensors, Programmable Temperature Sensors, Sensors Temperature Sensors

Magana

• Manual mai amfani