NINGBO RF433M15 Ikon Sadarwar Sadarwar Sadarwar Sadarwar Wuta Mai Nisa

Ƙayyadaddun bayanai

Samfura	AT2688 Pendant Light
Siffofin	WiFi Connection, Scene Modes, Color Adjustment

Remote Control WiFi Connection Network Logic and Function Description

1. Switch button 1 on the top left corner of the remote control, press and hold for 5 seconds within 30 seconds of powering on the product. Pairing: when paired successfully, the product will flash 2 cold white lights to indicate successful pairing. If the product is not paired within the specified time, please power it on again for pairing. After successfully pairing the remote control (default pairing below), press the button briefly to turn on/off the lights.
2. Press and hold the WiFi button 2 in the upper right corner of the remote control for at least 5 seconds to reset the product module’s networking. The product will enter the module’s networking mode and re-pair with the mobile app for networking.
3. Remote control 3 corresponds to a row of 1H, 4H, and 8H buttons. When the corresponding button is pressed, after the product is timed for 1 hour, 4 hours, and 8 hours respectively, the product will automatically turn off the lights.
4. The middle ring of remote control 4 corresponds to warm white light on the left side of Warm, and short press the color temperature (adjust the color temperature to warm white light by 10% once, and finally reach the warm white light color temperature). The Cool on the right side of the circular ring corresponds to the cool white light of the product, as well as the function of short pressing the color temperature (adjusting the color temperature of the cool white light by 10% corresponding to one press, and finally reaching the warm white light color temperature).
5. Press the button on the circular ring to increase the brightness of the product. Press once to increase the brightness by 10%, and finally reach 100% brightness. Press the button on the circular ring to lower the brightness of the product. Press once to lower the brightness of the corresponding product 10%, ultimately reaching a brightness of 10%.
6. The 5 Scene mode buttons in the middle of the circular ring switch product scene modes, corresponding to the mobile APP scene modes. Press once to switch one scene, for a total of 8 scenes.
7. Separate 6 rows of color buttons: Red, Green, Blue. Press the corresponding button to convert the product into the corresponding light.
8. Long strip with 7 color tones – hue, short press +/- button. The product switches back and forth from red light (- button lowest color) – green light – blue light to pink light (+ button highest color), with 10 colors.
9. Currently applicable product: AT2688 pendant light
   • (1) Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma (2) dole ne wannan na'urar ta karɓi duk wani tsangwama da aka samu, gami da tsangwama wanda zai iya haifar da aiki maras so.

Bayanin FCC

Na'urar Class B:

NOTE: An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class B, bisa ga sashi na 15 na Dokokin FCC. An ƙirƙira waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifarwa, yana amfani da kuma zai iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma ana amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aikin ya haifar da tsangwama mai cutarwa ga liyafar rediyo ko talabijin, wanda za'a iya tantancewa ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara tsangwama ta hanyar ɗaya ko fiye na waɗannan matakan:

• Sake daidaitawa ko matsar da eriya mai karɓa.
• Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
• Haɗa kayan aiki zuwa wani mashigar da ke kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
• Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

Gargaɗi: Canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa kayan aiki.

Wannan na'urar ta bi sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. Wannan na'urar bazai haifar da tsangwama mai cutarwa ba.
2. Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.

Bayanin Bayyanar RF
An kimanta na'urar don saduwa da buƙatun bayyanar RF gabaɗaya. Ana iya amfani da na'urar a yanayin bayyanar šaukuwa ba tare da ƙuntatawa ba.

Bayanin IC
Wannan na'urar ta ƙunshi watsa (s)/masu karɓa (s) waɗanda ba su da lasisi waɗanda ke bin Innovation, Kimiyya da Ci gaban Tattalin Arziƙi RSS(s) waɗanda ba su da lasisin Kanada. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. Wannan na'urar bazai haifar da tsangwama ba.
2. Dole ne wannan na'urar ta karɓi kowane tsangwama, gami da tsangwama wanda zai iya haifar da aikin da ba a so na na'urar.

FAQ

• Tambaya: Menene zan yi idan na'urar tana haifar da tsangwama?
  A: If you experience interference issues, try relocating the device to a different area. Ensure it is not placed near other electronic devices that may be causing the interference.
• Tambaya: Zan iya canza na'urar ta kowace hanya?
  A: No, any changes or modifications not approved by the responsible party may void your authority to operate the equipment. Consult a professional if modifications are necessary.

Takardu / Albarkatu

NINGBO RF433M15 Ikon Sadarwar Sadarwar Sadarwar Sadarwar Wuta Mai Nisa [pdf] Manual mai amfani 2BAT7RF433M15 rf433m15

Magana

• Manual mai amfani