NUMERIC Volt Safe Plus Sashe na Sabis ɗin Sabis guda ɗaya

Ƙayyadaddun bayanai

iya aiki (kVA)	1	2	3	5	7.5	10	15	20
JAMA'A
Aiki	Na atomatik
Sanyi	Halitta / tilasta iska
Kariyar shiga	IP20
Juriya na rufi	> 5M a 500 VDC daidai da IS9815
Gwajin Dielectric	2kV RMS na minti 1
Yanayin yanayi	0 zuwa 45 ° C
Aikace-aikace	Amfani na cikin gida / Hawan bene
Matsayin amo	<50dB a nisan mitoci 1
Launi	Farashin 9005
Matsayi	Ya dace da IS9815
Shigar IP/OP-Cable	Gefen gaba / gefen baya
Kulle kofa	Gefen gaba
Daidaituwar janareta	Mai jituwa
INPUT
Voltage kewayon	Na al'ada - (170 V ~ 270 V + 1% AC); Fadi - (140 ~ 280 V + 1% AC)
Kewayon mita	47 ~ 53 ± 0.5% Hz
Saurin gyarawa	27V/sec (Ph-N)
FITARWA
Voltage	230 VAC + 2%
Waveform	Haɓakawa na gaskiya na shigarwa; babu murdiya da aka gabatar ta hanyar stabilizer
inganci	> 97%
Halin wutar lantarki	Immune don loda PF
Kariya	Rashin tsaka tsaki
	An yanke mita
	Wanda ya kamu da cutar
	Shigarwa: Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarfafawa: Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarƙashin Ƙarfafawa
	Ƙarfafawa (Tafiya ta Lantarki) / Gajeren kewayawa (MCB/MCCB)
	Rashin gogewar carbon
NA JIKI
Girma (WxDxH) mm (± 5mm)	238x320x300			285x585x325	395x540x735	460x605x855
Nauyi (kgs)	13-16			36-60	70-80	60-100	100-110	130-150
LED dijital nuni	GASKIYA ma'aunin RMS
	Shigar da kunditage
	Fitarwa voltage
	Mitar fitarwa
	Loda halin yanzu
Alamun gaban panel	Mais ON, Output ON, Alamun tafiya: Ƙarƙashin shigarwa, Ƙarƙashin shigarwa, Ƙarƙashin fitarwa, Ƙarfin fitarwa, Ƙarfafawa

Umarnin Amfani da samfur

Gabatarwa

1. Siffofin: VOLTSAFE PLUS na'urar daidaitawa ta servo ce mai mataki-daya tare da iyakoki daga 1 zuwa 20 kVA. Yana aiki ta atomatik kuma yana ba da ingantaccen voltage gyara.
2. Ka'idar Aiki: Stabilizer yana tabbatar da ingantaccen fitarwa voltage ta ci gaba da sa ido da daidaita shigar da voltage canje -canje.
3. Tsarin zane: Zane-zane na toshe yana kwatanta haɗin shigarwa da fitarwa na servo stabilizer.

Muhimman Umarnin Tsaro
Babban Kariyar Tsaro: Don hana haɗari, guje wa shigar da stabilizer a wuraren da ke da kayan wuta ko kusa da injina mai ƙarfi.

Shigarwa

• Tsarin Shigarwa: Bi lambobin lantarki na gida da ma'auni yayin shigarwa. Haɗa kebul ɗin lantarki zuwa keɓaɓɓen soket ɗin fitarwa ko toshe tasha.
• Tushen Tsaro na AC: Tabbatar da ƙasa mai kyau ta hanyar haɗa wayar ƙasa zuwa tashar tashar ƙasa ta chassis.

Ƙayyadaddun bayanai
An bayyana cikakkun bayanai na VOLTSAFE PLUS servo stabilizer a sama.

GABATARWA

• Taya murna, muna farin cikin maraba da ku zuwa ga dangin abokan cinikinmu. Na gode da zabar Lamba a matsayin amintaccen abokin aikin warware wutar lantarki; yanzu kuna da damar zuwa mafi girman hanyar sadarwar mu na cibiyoyin sabis 250+ a cikin ƙasar.
• Tun daga 1984, Numeric yana ba abokan cinikinsa damar haɓaka kasuwancin su tare da manyan hanyoyin samar da wutar lantarki waɗanda ke yin alƙawarin ƙarfi da tsabta tare da sawun muhalli mai sarrafawa.
• Muna sa ran ci gaba da taimakon ku a cikin shekaru masu zuwa!
• Wannan jagorar tana ba da cikakken bayani game da shigarwa da aiki na VOLTSAFE PLUS.

Disclaimer

• Abubuwan da ke cikin wannan jagorar dole ne su canza ba tare da sanarwa ba.
• Mun ba da kulawa mai kyau don ba ku jagorar da ba ta da kuskure. Lambobin ƙididdige alhaki na kowane kuskure ko ragi da ƙila ya faru. Idan kun sami bayani a cikin wannan jagorar da ba daidai ba, yaudara, ko bai cika ba, za mu yaba da tsokaci da shawarwarinku.
• Kafin ka fara shigarwa na servo voltage stabilizer, da fatan za a karanta wannan littafin sosai. Garanti na wannan samfurin ba shi da amfani, idan an yi amfani da samfurin ba daidai ba.

Gabatarwa

Lamba VOLTSAFE PLUS voltage stabilizer tare da ci-gaban fasahar tushen microprocessor don daidaita layin tsarin wutar AC. Wannan stabilizer kayan aiki ne na lantarki wanda ke ba da juzu'in fitarwa akai-akaitage daga shigar da canji AC voltage da yanayin kaya iri-iri. VOLTSAFE PLUS yana samar da madaidaicin fitarwa voltage tare da ± 2% daidaito na saitin voltage.

Siffofin

• Nuni dijital kashi bakwai
• Babban fasahar tushen MCU
• Babban inganci da aminci
• Mai jituwa mai jituwa
• Fasahar SMPS da aka gina a ciki
• Babu murdiya ta hanyar igiyar ruwa
• Yankewa da yawa
• Asarar wuta kasa da 4%
• Ci gaba da zagayowar ayyuka
• Yana ba da gargaɗin buzzer mai ji don kuskure / yanayin tafiya
• Nunin LED na gani don alamun tafiya & mains ON
• Tsawaita rayuwa
• Babban MTBF tare da ƙarancin kulawa

Ka'idar aiki

• VOLTSAFE PLUS yana amfani da tsarin mayar da martani na rufaffiyar don saka idanu akan shigarwa da fitarwa voltages kuma don gyara saɓanin shigarwar voltage. Fitar da akai-akai voltage ana samun ta ta amfani da madaidaicin autotransformer (variac) tare da injin AC na aiki tare da kewayen lantarki.
• Da'irar lantarki ta tushen microcontroller tana jin ƙarfin voltage, halin yanzu da mita kuma yana kwatanta shi tare da tunani. Idan akwai sabani a cikin shigarwar, yana haifar da sigina wanda ke ƙarfafa motar don canza voltage kuma gyara fitarwa voltage cikin haƙurin da aka ce. Ƙarfafawa voltage ana kawota ne don lodin AC kawai.

Toshe zane
VOLTSAFE PLUS - Sashe na 1 - Mataki na 1: Tsarin toshe Servo Stabilizer.

Ayyukan gaban panel & nunin LED

Nunin zaɓin mita na dijital
I/PV	Nuna nunin zaɓin mita don shigar volts
O/PV	Nuna nunin zaɓin mita don fitarwa volts
FREQ	Nuna nunin zaɓin mita don mitar fitarwa
O/PA	Nuna nunin zaɓin mita don kayan fitarwa na yanzu

Canjin menu
Input volts	Fitar wutar lantarki	lodin fitarwa halin yanzu	Mitar fitarwa

Aikata da Karɓa - Ayyuka

• Dos
  
  • Don duk matakan servo stabilizers lokaci ɗaya, ana ba da shawarar haɗa tsaka tsaki kawai da kowane lokaci ɗaya kawai.
  • Tabbatar cewa babu sako-sako da haɗi.
• Kada a yi
  • Kada a musanya layin shigarwa & layin fitarwa a haɗin lokaci ɗaya.
  • A rukunin yanar gizon, kar a haɗa lokaci zuwa lokaci a gefen shigarwa na servo, a kowane yanayi. Tsakanin tsaka-tsakin lokaci kawai shine a haɗa shi.

Muhimman umarnin aminci

Tsare-tsare na gaba ɗaya

• Kada a bijirar da na'urar zuwa ruwan sama, dusar ƙanƙara, feshi, ƙura ko ƙura.
• Don rage haɗarin haɗari, kar a rufe ko hana buɗewar samun iska.
• Kar a shigar da stabilizer a cikin dakin da ba za a iya cirewa ba wanda zai iya haifar da zafi fiye da kima.
• Don guje wa haɗarin wuta da girgiza lantarki, tabbatar da cewa wayoyi na yanzu suna cikin yanayi mai kyau kuma wayar ba ta da girma.
• Kada a yi aiki da stabilizer tare da lalatawar wayoyi.
• Wannan kayan aikin yana ƙunshe da kayan lantarki waɗanda zasu iya samar da baka ko tartsatsin wuta. Don hana wuta ko fashewa, kar a sanya shi a cikin ɗakunan da ke ɗauke da batura ko kayan wuta ko a wuraren da ke buƙatar kariya ta kayan aiki. Wannan ya haɗa da duk wani sarari da ke ɗauke da injuna mai ƙarfi, tankunan mai ko haɗin gwiwa, kayan aiki, ko sauran haɗin gwiwa tsakanin sassan tsarin mai.

MUHIMMAN GARGADIN TSIRA

• Kamar yadda haɗari voltages suna nan a cikin servo-controlled voltage stabilizer, ƙwararrun masu fasaha ne kaɗai aka yarda su buɗe shi. Rashin lura da wannan na iya haifar da haɗarin girgiza wutar lantarki da ɓarna kowane garanti mai ma'ana.
• Kamar yadda servo stabilizer ya sami sassa masu motsi kamar variac hannu da mota, da fatan za a ajiye shi a cikin yanayi mara ƙura.

Shigarwa

Hanyar shigarwa

• Cire naúrar a hankali ba tare da lalacewa ba tun da marufi na kayan yana da kwali tare da kumfa mai cike da kumfa, dangane da lamarin. Ana ba da shawarar matsar da kayan aikin da aka cika har zuwa wurin shigarwa kuma cire shi daga baya.
• Dole ne a sanya sashin a nisa mai nisa daga bango kuma ana buƙatar tabbatar da samun iska mai kyau don ci gaba da aiki. Ya kamata a shigar da naúrar a cikin yanayi mara ƙura kuma a wurin da ba a haifar da raƙuman zafi ba.
• Idan rukunin servo yana da kebul na shigar da wutar lantarki mai 3-pin, haɗa shi zuwa filogi 3-pin [E, N & P] Indiya ko soket na 16A Indiya zuwa babban maɓalli na 1-pole, daidai da lambobin lantarki na gida ma'auni.
• A wasu samfura, inda servo ke da mai haɗawa ko allon tasha, haɗa shigarwar da aka yi alama da fitarwa bi da bi daga allon tasha.
  Lura: Kar a musanya shigar da sashe guda ɗaya - L & N.
• Kunna Babban MCB
  Lura: Input & Fitarwa MCB kayan haɗi ne na zaɓi kamar yadda buƙatun abokin ciniki don masu sanyaya iska guda ɗaya na servo stabilizers.
• Kafin haɗa kaya, duba fitarwa voltage a cikin mitar nuni da aka bayar a gaban panel.
• Ya kamata ya kasance cikin tsarin da ake so voltage ± 2% Tabbatar da fitarwa voltage wanda aka nuna akan mitar dijital a gaban panel. Tabbatar cewa servo stabilizer yana aiki da kyau.
• Kashe Babban MCB kafin haɗa kaya.
• Haɗa fitowar lokaci ɗaya zuwa ƙarshen fitarwa da aka ƙididdige kebul na lantarki daga kaya, daidai da lambobin lantarki da ƙa'idodi na gida. Haɗa dayan ƙarshen kebul ɗin lantarki zuwa soket ɗin UNI na Indiya ko tasha mai alamar 'OUTPUT'.

AC aminci grounding
Ya kamata a haɗa waya ta duniya tare da tashar tashar ƙasa ta chassis na naúrar.

GARGADI! Tabbatar cewa duk haɗin AC suna da ƙarfi (ƙarfin karfin 9-10ft-lbs 11.7-13 Nm). Haɗin da ba a kwance ba zai iya haifar da zafi fiye da kima da haɗari.

Sauya BYPASS – Na zaɓi
Lura: Abubuwan ƙayyadaddun samfuri suna ƙarƙashin ikon canzawa zalla bisa shawarar kamfani ba tare da wani sanarwa na farko ba.

SAI DOMIN NEMAN RASHIN MU KUSA

Babban Ofishin: bene na 10, Kotun Cibiyar Prestige, Block Office, Vijaya Forum Mall, 183, NSK Salai, Vadapalani, Chennai - 600 026.

Tuntuɓi Cibiyar Kyakkyawan Abokin Cinikinmu na 24 × 7:

• Imel: abokin ciniki.care@numericups.com
• Waya: 0484-3103266 / 4723266
• www.numericups.com

FAQ

Tambaya: Za a iya amfani da VOLTSAFE PLUS servo stabilizer a waje?
A: A'a, an tsara stabilizer don amfanin cikin gida kawai.

Tambaya: Menene ma'aunin wutar lantarki na stabilizer?
A: A stabilizer yana da ikon factor fiye da 97%.

Tambaya: Ta yaya zan san idan akwai fiye da kima?
A: Stabilizer yana da kariya mai yawa tare da aikin tafiya na lantarki.

Takardu / Albarkatu

NUMERIC Volt Safe Plus Sashe na Sabis ɗin Sabis guda ɗaya [pdf] Manual mai amfani Volt Safe Plus Sashe na Sabis ɗin Sabis guda ɗaya, Sabis ɗin Sabis ɗin Sabis guda ɗaya, Sabis ɗin Stabilizer na Mataki, Servo Stabilizer

Magana

• Manual mai amfani