ORACLE Lighting 4001 TRIGGER DAYA Bluetooth Solid State

Muhimman Bayanai

Yadda ake shigar da maɓalli na Trigger DAYA zuwa na'urar Android daga karce

Don tabbatar da cewa wayarka tana iya haɗawa da sarrafa relays masu yawa, dole ne a toshe su, kunna su, kuma a haɗa su ɗaya bayan ɗaya.

KARA SAKE DAYA

1. Tilasta Dakatar da ƙa'idar ta Trigger Plus idan tana gudana a halin yanzu (daga saitunan tsarin) kuma danna ƙaramin alamar murabba'i a ƙasan dama don share shi daga… duk abin da sarari yake.
2. Toshe kuma kunna kunna wuta ta Farko na Farko DAYA, MATSAYI LED ya kamata ya kasance yana kiftawa don nuna cewa gudun ba da sanda yana cikin yanayin haɗawa.
3. Kaddamar da app
4. Matsa 'Bluetooth Relay DAYA'
5. Matsa 'Ƙara Na'ura'
6. Shigar da '0000' tsohuwar lambar
7. Shigar kuma tabbatar da lambar '0000' na musamman
8. Yakamata a haɗa Fara Fara DAYA yanzu
9. Cire wuta daga farkon relay na Trigger DAYA: Idan a kan mai kunnawa, kunna kashe sannan kuma cire haɗin relay na farko daga soket ɗin sa.

KARA SAUKI NA BIYU, UKU, HUDU, DA SAURANSU

1. Tilasta Dakatar da ƙa'idar ta Trigger Plus idan tana gudana a halin yanzu (daga saitunan tsarin) kuma danna ƙaramin alamar murabba'i a ƙasan dama don share shi daga… duk abin da sarari yake.
2. Toshe kuma kunna wutan lantarki na biyu Mai jawo DAYA, 'Matsayi' LED yakamata ya kasance yana lumshewa a hankali don nuna cewa gudun ba da sanda yana cikin yanayin daidaitawa.
3. Kaddamar da app
4. Taɓa 'Bluetooth Relay DAYA'…zaku ga abubuwan sarrafawa don gudun ba da sanda na farko da kuka ƙara
5. Matsa alamar saitin (gear) a ƙasan dama na allon app
6. Matsa 'ƙara na'ura' (idan allon ya tafi babu komai na ƴan daƙiƙa guda kuma ya dawo kan wannan allon, sake gwadawa)
7. Shigar kuma tabbatar da '0000' tsoffin lambobin masu amfani
8. Ikon sarrafawa na relay na biyu yakamata ya bayyana akan allon ƙasa na farko
9. Idan haɗa ƙarin relays: Latsa wuta kuma cire plug ɗin relay ɗin da kuka haɗa, toshe kuma kunna relay na gaba.
10. Maimaita wannan tsari don kowane ƙarin gudun ba da sanda da aka ƙara.

Idan ka lura shuɗin LED ɗin da ke kan relay ɗinka ya yi ƙarfi kafin ma ka fara aikin haɗin kai, ya riga ya haɗa kanta zuwa wata wayar… yana buƙatar sake saitawa kafin haɗa zuwa sabuwar waya.

Don sake saita bluetooth akan relay DAYA:

• Latsa ka riƙe ƙaramin maɓallin 'RESET', shuɗin LED ɗin zai lumshe sauri sau 5 sannan a kashe
• Zagayowar wutar lantarki na gudun ba da sanda.
• Lokacin da gudun ba da sanda ya juya baya kan shuɗin LED ya kamata yanzu ya lumshe a hankali a hankali, yana cikin yanayin haɗawa.

Takardu / Albarkatu

ORACLE Lighting 4001 TRIGGER DAYA Guda Guda na Jiha na Bluetooth [pdf] Umarni 4001, 4001 TRIGGER DAYA Bluetooth Solid State Relay, 4001, TRIGGER DAYA Bluetooth Solid State Relay, Bluetooth Solid State Relay, Relay State, Relay

Magana

• Manual mai amfani