PeakTech DGraph Jagorar Mai Amfani da Software

Shigarwa

Shigar da Baturi, Software & Driver bisa ga Manual User. Don amfani da mai shigar da bayanai, ɗauki matakai masu zuwa:

1. Tabbatar cewa an shigar da baturin daidai, ko kuma idan kuna amfani da tashar USB don kunna mai shigar da bayanai kai tsaye, ba dole ba ne ka cire mai shigar da bayanai daga tashar USB lokacin da mai shigar da bayanan ke shiga.
2. Saka mai shigar da bayanan a cikin tashar USB mai samuwa na PC wanda ya shigar da software da direba na Data Logger Graph.
3. Danna sau biyu akan gunkin Graph na Data Logger akan tebur na Windows. Wannan zai loda masarrafar Data Logger Graph. A gefen hagu na babban allo na software, zaku iya ganin maɓallin farawa sannan danna shi. Wannan zai buɗe maganganun Na'urar Data Logger.
4. Zaɓi na'urar shigar da bayanai wanda za'a saita (ko tsoho). Anan zaku iya bincika sigar firmware, matsayi, da sauransu na na'urar shigar da bayanai da aka zaɓa.
5. Danna maɓallin Saita don loda maganganun Saita Logger Data. Anan zaku iya bin umarnin allo kuma saita mai shigar da bayanai (ko tsoho idan ƙoƙarin farko).
6. Danna maɓallin Gama. Mai shigar da bayanan zai fara daidai da saitunan ku.
7. Cire mai shigar da bayanai daga tashar USB na PC ban da tashar USB za a yi amfani da ita azaman wutar lantarki kamar yadda ake buƙata.
8. Lokacin da aiki ya ƙare, zaku iya zazzage bayanai zuwa PC. Yi daidai da mataki na 2 zuwa 4 na sama da farko, sannan danna maɓallin Zazzagewa akan maganganun Na'urar Data Logger. Anan zaka iya bin allon
   umarnin don saukewa da adana bayanai zuwa PC. Lura cewa kana buƙatar shigar da kalmar sirri daidai don aiki da wannan matakin idan mai shigar da bayanai an saita kalmar sirri a da (A'a don tsohowar masana'anta).
9. Kuna iya amfani da software na Graph na Data Logger don tsarawa, tantancewa da buga bayanan, da fitar da bayanan zuwa wani file tsari (xls, txt, jpg, da sauransu).

Saitin Logger Data

Danna sau biyu akan gunkin Graph na Data Logger akan tebur na Windows. Wannan zai loda masarrafar Data Logger Graph. A gefen hagu na babban allon software, zaku iya ganin Fara  button kuma danna kan shi. Wannan zai buɗe maganganun Na'urar Data Logger.

• Zaɓi Na'ura: Dukkanin na'urorin tattara bayanan da aka haɗa za'a jera su, kuma zaku iya zaɓar na'urar tattara bayanai da za'a saita. Kowace na'ura mai shigar da bayanai tana da lambar serial da masana'anta ta shirya. Matsar kuma sanya linzamin kwamfuta akan maɓallin LED. Kuna iya ganin filashin LED mai launin rawaya akan lamarin mai shigar da bayanan da aka zaɓa. Za a nuna bayanan na'urar da aka zaɓa da matsayi, gami da bayanin na'urar, sigar firmware, kalmar sirri ta wanzu, halin shiga da halin baturi. Danna maɓallin Refresh, mai amfani zai iya sabunta bayanan na'urar da aka zaɓa da hannu da hannu.
  Danna maɓallin "Bayani" don ganin cikakkun bayanai da matsayi na mai shigar da bayanan da aka zaɓa. Danna "Dakatar da Shiga" don dakatar da shiga na yanzu.
  Danna "Fara shiga" don fara shiga kai tsaye ba tare da sake saitawa ba.
• Saita: Danna maɓallin Saita don buɗe maganganun Saita Logger Data.
  Zaɓi Gabaɗaya shafin.
  

1. Sunan Logger. Sunan mai shigar da bayanan don ba shi ainihin asali.
2. Sampda Rate. Zaɓi tazarar lokaci don umurci mai shigar da shiga don yin karatun log akan takamaiman ƙimar.
3. Kalmar wucewa Idan mai amfani ya saita kalmar sirri don mai shigar da bayanai, zai buƙaci mai amfani ya shigar da kalmar wucewa lokacin zazzage bayanai.
   Sannan, zaɓi abin Saitunan Tashoshi tab. Anan ya lissafta duk saitunan da suka danganci tashar.
   

• Bayani. Sunan tashar.
• Matsayi Danna sau biyu don nuna menu mai tasowa, kuma mai amfani zai iya Kunna ko Kashe tashar.
  
• Naúrar Danna sau biyu don nuna menu mai faɗowa, kuma mai amfani zai iya zaɓar naúrar don tashar.
• Karancin Iyaka / Babban Iyaka. Anan yana bawa mai amfani damar saita ƙaramar ƙararrawa mai girma.
• Ƙararrawar LED. Mai amfani zai iya zaɓar ko cirewa don kunna ko kashe ƙararrawar LED lokacin da aka shigar da karatun ya wuce ƙananan ƙararrawa.
  
• Riƙe ƙararrawa. Riƙe Tick don ci gaba da nuna yanayin ƙararrawar LED koda lokacin da aka dawo da karatun da aka rubuta a cikin ƙayyadaddun ƙararrawa.
• Sampda Mode. Lokacin da sampƙimar le ya fi na ciki na asaliample rating, da karatu tsakanin sampza a sarrafa tazarar tazara kamar yadda ke ƙasa
  • Nan take. Yi watsi da karatun tsakanin sampda adadin tazara.
  • Matsakaicin Samu matsakaicin duk karatun tsakanin sampda adadin tazara.
  • Matsakaicin Samu iyakar duk karatun tsakanin sampda adadin tazara.
  • Mafi ƙarancin Samu mafi ƙarancin duk karatun tsakanin sampda adadin tazara.
    
• Daidaitawa. Yana iya goyan bayan daidaitawa har zuwa maki biyu. Manufar ita ce darajar da za a daidaita. Ainihin shine ainihin ƙimar ƙimar manufa.

Muhimmiyar Bayani: Kuskuren aunawa zai faru idan mai amfani yayi kowane daidaitawa ba daidai ba. Mai amfani zai iya share ƙimar daidaitawa mara kyau. Duba ci gaba shafin don ƙarin cikakkun bayanai.
Dole ne mai amfani ya shigar da 0 don duk manufa da gaske idan mai amfani baya son canza kowane saitunan daidaitawa.

Sa'an nan, zaɓi Fara da Tsaida Hanyar tab.

1. Hanyar farawa. Zaɓi yadda ko lokacin fara shiga.
2. Hanyar Tsayawa. Zaɓi yadda ake dakatar da shiga. Lura cewa idan mai amfani ya zaɓi “Sake Rubutun Lokacin Cika”, mai amfani zai iya dakatar da shiga ta maballin akan mahalli na mai shigar da bayanai.
3. Duration Logging. Nuna lokacin tsawon lokaci a ƙarƙashin saitunan.

A ƙarshe, zaɓi Advanced shafin.

1. LED. Mai amfani zai iya kunna ko kashe alamar koren LED don matsayin shiga.
2. LCD. Idan mai amfani yayi la'akari da shi, LCD koyaushe yana kunne (kawai don takamaiman samfur)
3. Share Daidaitawa. Mai amfani zai iya sake saitawa da share daidaitawar da aka saita akan mai shigar da bayanai a baya.
4. Zaɓi Nau'in Thermocouple. Zaɓi nau'in thermocouple don mai shigar da bayanai (NOTE: kawai don takamaiman
   model)
5. Lambar Wayar Ƙararrawa. Danna maɓallin "SMS Ƙararrawa Lambar Wayar Saita" button. Shigar da lambar wayar hannu ta inda kake son samun saƙon ƙararrawa lokacin da ƙararrawar SMS ta bayyana. Lambobin wayar hannu guda 5 akwai aƙalla kuma da fatan za a tabbatar da haɗin kai da daidaiton lambobin shigarwa, in ba haka ba masu amfani ba za su iya karɓar SMS kullum ba. A halin yanzu, masu amfani za su iya tambayar karatun Logger Data da matsayin baturi ta hanyar buga Data Logger kuma za a rubuta wannan lambar a cikin jerin lambar ƙararrawa ta atomatik. Sanarwa: babban lambar wayar hannu a cikin jerin lambobi 5 za a tilastawa gogewa idan an rubuta Data Logger fiye da lambobi 5. (LURA: Sai kawai don takamaiman samfurin)
   
6. Jinkirin ƙararrawa. Masu amfani za su iya zaɓar jinkirin ƙararrawa. Mai shigar da bayanai zai fara ƙararrawa bayan lokacin jinkiri da aka zaɓa (NOTE: kawai don takamaiman samfuri)

Danna maɓallin Gama don saitawa. Danna maɓallin Cancel don soke saitin.

Bayanan kula:

• Duk wani bayanan da aka adana za a share su har abada idan an gama Saita. Don tabbatar da cewa kun adana wannan bayanan kafin a ɓace, danna Cancel sannan kuna buƙatar saukar da bayanai.
• Yiwuwar baturin ya ƙare kafin mai shiga ya gama ƙayyadaddun sampda maki. Koyaushe tabbatar da cewa ragowar cajin da ke cikin baturin ya isa ya šauki tsawon lokacin aikin ku. Idan kuna shakka, muna ba da shawarar cewa koyaushe ku sanya sabon baturi kafin shiga mahimman bayanai.
• Idan mai amfani ya zaɓi "Fara da Maɓallin", da fatan za a fara shiga da hannu.

Zazzage bayanai

A gefen hagu na babban allon software, zaku iya ganin Fara button kuma danna kan shi. Wannan zai buɗe maganganun Na'urar Data Logger.

1. Zaɓi Na'ura don sauke bayanai.
2. Danna maɓallin Zazzagewa da shigar da kalmar wucewa idan akwai, kuma za a nuna maganganun Ajiye.
   
3. Ƙayyade hanyar da aka ajiye kuma suna sunan wanda aka ajiye file. Danna maɓallin Ajiye don adana bayanai.
   
4. Lokacin da aka gama saukewa, za a nuna maganganun da ke ƙasa, kuma mai amfani ya danna "Buɗe" don buɗe abin da aka zazzage file kai tsaye, ko danna “Ƙara” don ƙara abubuwan da aka sauke file zuwa jadawali na yanzu, ko danna "Babu" don fita.
   

Karatun Gaskiya

Lokacin da mai rikodin bayanai ya haɗa zuwa PC, mai amfani zai iya view karatu na ainihi.

Dakatar da Shiga

Mai amfani zai iya danna kan Maɓallin tsayawa don dakatar da shiga idan mai shigar da bayanai yana shiga.

Cikakken Bayani

Danna kan Cikakkun bayanai button to view bayanai da cikakkun bayanai na matsayi na mai amfani da bayanai.

Interface Software

Hoton da ke sama yana nuna bayanai masu zuwa:

1. Standard Toolbar
2. Zuƙowa da Pan Toolbar
3. Toolbar Graph
4. Layin Grid
5. Axis na hagu na tsaye
6. Dama a tsaye axis
7. Layin zane
8. Layi mai iyo
9. Axis a kwance
10. Karatun don layin iyo na yanzu
11. Labari
12. bangon hoto
13. Bayanan shafi
14. Tagar lissafin zane
15. Tagan kididdiga
16. Tagar teburin bayanai
17. Babban menu

Bude File

Danna gunkin na biyu akan daidaitaccen kayan aiki ko danna kan Babban Menu->File->Buɗe don buɗe *.dlg ko *.mdlg file.

Ƙara File da Multi-Graph Mode

Software na iya tallafawa da yawa files ana nuna su a cikin ƙirar hoto. Mai amfani na iya danna gunkin na uku ko Babban Menu->File->Ƙara File don ƙara files zuwa jadawali na yanzu. Mai amfani zai iya kwatantawa da bincikar fileamfani da wannan aikin.

Layin jadawali tare da A harafi shine a file, kuma layin jadawali tare da harafin B wani ne file. Mai amfani zai iya ajiye shi zuwa sabon *.mdlg file. Lura cewa * .mdlg file bukatar asali * .dlg file yin zane daidai.

Zuƙowa da Pan

Zuƙowa da Hanyar Pan

• Zuƙowa ta atomatik da kwanon rufi a kowace hanya
• Zuƙowa a kwance da kwanon rufi kawai a kwance
• Zuƙowa Tsaye da kwanon rufi kawai a tsaye
• Da hannu Saita lokacin farawa da lokacin ƙarewa don axis a kwance, kuma saita ma'auni don axis na tsaye.
  

Zuƙowa da Pan

• Yi amfani da linzamin kwamfuta don dannawa da ja akwati kusa da kowane yanki mai hoto don ƙara girman yankin da aka zaɓa.
• Latsa ka riƙe tsakiyar maɓallin linzamin kwamfuta a kowane wuri mai hoto, kuma matsar da linzamin kwamfuta zuwa yankin jadawali.

Zuƙowa waje

• Danna kan Gyara Karshe maballin don nuna yankin jadawali na ƙarshe.
• Danna kan  Gyara Duka maballin don nuna ainihin yankin jadawali.

Sake sabuntawa

Fitarwa da Ajiye

Software na iya ajiyewa da buɗe * .dlg ko * .mdlg file rubuta a tsoho. Amfani kuma na iya ajiyewa kamar sauran file iri, gami da *.txt, *.csv, *.xls, *.bmp, da *.jpg

Mai amfani na iya danna Babban Menu->Edit-> Kwafi don kwafi yankin jadawali zuwa allo.

Jerin Lissafi

Mai amfani na iya amfani da taga lissafin jadawali don aiki file da ayyukan da suka danganci tashar cikin sauƙi.

• Ara ko cire file ta amfani da maɓallin dama na linzamin kwamfuta a file yankin bishiyar.
  
• Bude saitunan da suka danganci tashar a yankin tashar bishiyar.
  
• Nuna ko ɓoye layin da aka zaɓa.
  

Tagar kididdiga

Tagar za ta nuna bayanan mai shigar da bayanai da kididdigar karatu

Teburin Bayanai

Tagan zai nuna karatun a tebur

Buga

Don buga jadawali, kididdiga da tebur na bayanai, danna gunkin firinta akan madaidaicin kayan aiki ko zaɓi Buga daga File ja-saukarwa menu.

Mai amfani kuma zai iya zaɓar abubuwan da aka buga a cikin maganganu mai zuwa.

Saitunan zane

Don saita wurin jadawali, danna gunkin Saitunan zane akan kayan aikin jadawali ko zaɓi saitunan jadawali daga menu na jadawali.

Alama Bayanan Bayanai

Danna maballin dama akan yankin jadawali don nuna menu mai tasowa da ke ƙasa, Danna "Alamta Bayanan Bayanai" don nuna alamomi akan duk s.ample maki wurare.

Ƙara Sharhi

Mai amfani na iya ƙara sharhi a kowane wuri na yanki mai hoto, sannan kuma ƙara sharhi ga kowane sampda maki.

Juyin Juya Hali

Don ƙirƙirar sabon raka'a da ƙaramin raka'a, danna kan jujjuyawar raka'a daga menu na ƙasa-ƙasa na kayan aiki.

Layin Mahadi

Mai amfani zai iya ƙirƙirar sabbin bayanan jadawali da layi ta hanyar magana da karantawa daga mai shigar da bayanai. Danna kan mahadi layi daga kayan aikin cire kayan aiki.

 

Takardu / Albarkatu

PeakTech DGraph Software [pdf] Jagorar mai amfani DGraph Software, DGraph, Software

Magana

• Manual mai amfani