Philio PST10 4-in-1 Multi Sensor

4 a cikin 1 Multi-Sensor PST10 - A/B/C/E

4 a cikin 1 Multi-sensor PST10 yana da PIR, kofa / taga, zazzabi, da firikwensin haske don haɗa ayyuka da yawa a cikin na'ura ɗaya. Wannan na'urar samfurin Z-Wave Plus™ ne mai ƙarfin tsaro. Saƙonnin Z-Wave Plus™ da aka ɓoye suna goyan bayan PST10 don sadarwa tare da wasu samfuran Z-Wave Plus™. Ana iya amfani da PST10 tare da na'urorin Z-Wave™ (tare da tambarin Z-Wave™) daga masana'anta daban-daban, kuma ana iya haɗa shi cikin cibiyoyin sadarwar Z-Wave™ daga masana'anta daban-daban. Ana goyan bayan samfurin tare da fasalin Sama-da-Air (OTA) don haɓaka firmware.

Aiki Kwatanta A/B/C/E

	Pir	Kofa/Taga	Zazzabi	Hasken firikwensin
PST10-A	V	V	V	V
Saukewa: PST10-B	V		V	V
Saukewa: PST10-C		V	V	V
PST10-E	V	V	V

Ƙayyadaddun bayanai

Ƙarfi	3VDC (batir lithium CR123A)
RF nesa	Min. 40M na cikin gida, 100M layin waje na gani,
Mitar RF	868.40 MHz, 869.85 MHz (EU) 908.40 MHz, 916.00 MHz (US) 920.9MHz, 921.7MHz, 923.1MHz (TW/KR/Thai/SG)
Matsakaicin Ƙarfin RF	+ 10dBm (Kololuwa), -10dBm (Matsakaici)
Girma	24.9 x 81.4 x 23.1mm 25.2 x 7.5 x 7 mm (Magnetic)
Nauyi	23.2g (PST10-A, PST10-B, PST10-E) 21.2g (PST10-C)
Wuri	amfani na cikin gida kawai
Yanayin aiki	-20oC ~ 50oC
Danshi	85% RH max
FCC ID	Saukewa: RHHPST10

Shirya matsala

Alama	Dalilin Kasawa	Shawara
Na'urar ba za ta iya haɗawa zuwa cibiyar sadarwar Z-Wave ™ ba	Na'urar na iya a cikin hanyar sadarwar Z-Wave™.	Cire na'urar sannan sake haɗawa.

Domin Umarni zuwa http://www.philio-tech.com

Ƙarsheview

HANKALI

• maye gurbin baturi tare da nau'in da ba daidai ba wanda zai iya kayar da kariya (misaliample, a yanayin wasu nau'ikan batirin lithium);
• jefar da baturi cikin wuta ko tanda mai zafi, ko murkushe baturi da injina ko yanke, wanda zai iya haifar da fashewa;
• barin baturi a cikin yanayi mai tsananin zafi da ke kewaye wanda zai iya haifar da fashewa ko zubar da ruwa ko iskar gas mai ƙonewa;
• batirin da aka yiwa ƙarancin iska wanda zai iya haifar da fashewa ko zubar da ruwa mai ƙonewa ko iskar Gas Bayanin alamar yana a ƙasan na'urar \

 

Ara zuwa / Cire daga hanyar sadarwar Z-WaveTM
Akwai biyu tamper keys a cikin na'urar, ɗaya yana gefen baya, wani kuma yana gefen gaba. Dukansu suna iya ƙara, cirewa, sake saitawa ko haɗin gwiwa daga cibiyar sadarwar Z-WaveTM. Teburin da ke ƙasa yana lissafin taƙaitaccen aiki na ainihin ayyukan Z-Wave. Da fatan za a koma zuwa umarnin don Z-WaveTM na ku mai ba da takardar shaida na Farko don samun damar aikin Saita, kuma zuwa Ƙara/Cire/haɗin na'urorin.
Sanarwa: Haɗa ID ɗin kumburi wanda Z-WaveTM Controller ya keɓe yana nufin "Ƙara" ko "Haɗa". Ban da lambar lamba ID wanda Z-WaveTM Controller ya keɓe yana nufin "Cire" ko "Keɓe".

Aiki	Bayani
Ƙara	1. Shin mai kula da Z-WaveTM ya shigar da yanayin haɗawa. 2. Danna tampMaɓalli sau uku a cikin daƙiƙa 2 don shigar da yanayin haɗawa. 3. Bayan ƙara nasara, na'urar za ta tashi don karɓar umarnin saitin daga Z-WaveTM Controller game da 20 seconds.
Cire	1. Shin mai sarrafa Z-WaveTM ya shigar da yanayin cirewa. 2. Danna tamper key sau uku a cikin dakika 2 don shigar da yanayin wariya. An cire ID na Node.

Sake saiti	Sanarwa: Yi amfani da wannan hanyar kawai a yayin da babban mai sarrafa ya ɓace ko akasin haka. 1. Latsa maɓallin sau huɗu kuma kiyaye kusan daƙiƙa 5. 2. An cire ID kuma duk saitunan zasu sake saitawa zuwa tsoffin ma'aikata.
SmartStart	1. Samfurin yana da kirtani DSK, zaku iya maɓalli a lambobi biyar na farko don haɓaka aikin farawa mai wayo, ko kuna iya bincika lambar QR. 2. Ana iya ƙara samfuran da aka kunna SmartStart a cikin hanyar sadarwar Z-Wave ta hanyar bincika lambar QR ɗin Z-Wave da ke kan samfurin tare da mai sarrafawa yana ba da haɗawar SmartStart. Ba a buƙatar ƙarin mataki kuma za'a ƙara samfurin SmartStart ta atomatik a cikin mintuna 10 bayan kunnawa a kusa da cibiyar sadarwa. * sanarwa1: Ana iya samun lambar QR akan na'urar ko a cikin akwatin.
Ƙungiya	Wannan injin yana ba da ƙungiyoyi biyu na nodes. Ƙungiya ta ɗaya tana goyan bayan mafi girman nodes 2 da rukuni biyu na goyan bayan mafi girman nodes. Rukuni na 1 (Rukunin Rayuwa): Ana amfani da shi don abubuwan da aka dawo dasu. Darasi na umarni: 1. Rahoton sanarwa 2. Sensor rahoton matakai da yawa 3. Sake saitin na'ura Sanarwa a Gida 4. Rahoton Baturi 5. Rahoton Nuni Rukuni na 2: Ana amfani da shi don sarrafa haske, na'urar za ta aika umarnin "Basic Set" zuwa wannan rukunin. Darasi na umarni: 1. Saiti na asali
• Rashin nasara ko nasara a ƙara/cire lambar ID na iya zama viewed

Sanarwa T 1M: Koyaushe Sake saita na'urar Z-WaveTM kafin ƙoƙarin ƙara ta zuwa hanyar sadarwar Z-Wave

Sanarwar Z-WaveTM
Bayan na'urar ta ƙara zuwa hanyar sadarwar, za ta tashi sau ɗaya a rana a cikin tsoho. Lokacin da ya tashi zai watsa saƙon "Wake Up Notification" zuwa cibiyar sadarwar, kuma ya tashi 10 seconds don karɓar umarnin da aka saita. Matsakaicin tazarar tashin farkawa shine mintuna 30, kuma matsakaicin saiti shine awanni 120. Kuma matakin tazara shine minti 30. Idan mai amfani yana son tada na'urar nan da nan, da fatan za a cire murfin gaba, sannan danna tampkey sau daya. Na'urar zata tashi dakika 10.

Rahoton Sakon Z-WaveTM
Lokacin da motsi na PIR ya kunna, na'urar za ta ba da rahoton abin da ya faru kuma za ta ba da rahoton zazzabi da matakin haske.

Rahoton Motsi: Lokacin da aka gano motsin PIR, na'urar ba za ta nemi aika rahoton zuwa ga nodes a rukuni na 1 ba.
Rahoton Kofa/Taga: Lokacin da yanayin kofa/taga ya canza, na'urar ba za ta buƙaci aika rahoton zuwa ga nodes a rukuni na 1 ba.

Rahoton Sanarwa (V8)

Nau'in Sanarwa: Ikon Iko (0x06)
Lamarin: Kofa/Taga a buɗe (0x16)

An rufe kofa/taga (0x17)
Tamper Rahoton: The tamper makullin ana danna sama da daƙiƙa 5. Na'urar za ta shiga cikin yanayin ƙararrawa. A wannan yanayin, idan wani daga cikin tampIdan an saki maɓallai, na'urar ba za ta buƙaci aika rahoton zuwa ga kumburin rukuni na 1 ba.

Rahoton Sanarwa (V8)
Nau'in Sanarwa: Tsaron Gida (0x07)
Lamarin: Tampirin. An cire abin rufe fuska (0x03)

Rahoton Zazzabi:
Lokacin da aka gano yanayin PIR ya canza, na'urar ba za ta buƙaci aika "Rahoton Multilevel Sensor" zuwa nodes a rukuni na 1 ba.
Nau'in SensorZazzabi (0x01)

Rahoton bambancin yanayin zafi 
An kunna tsoffin wannan aikin, don musaki wannan aikin ta saita saitin NO.12 zuwa 0.
A cikin tsoho, lokacin da aka canza yanayin zafi zuwa ƙari ko debe digiri ɗaya Fahrenheit (digiri Celsius 0.5), na'urar za ta ba da rahoton bayanin zafin jiki ga nodes a cikin rukuni 1.
Tsanaki 1: Kunna wannan aikin, zai sa PIR Motion ya kashe ganowa lokacin da auna zafin jiki. A takaice dai, motsi na PIR zai makantar da dakika daya a cikin kowane minti daya.

Rahoton LightSensor:
Lokacin da aka gano yanayin PIR ya canza, na'urar ba za ta buƙaci aika "Rahoton Multilevel Sensor" zuwa nodes a rukuni na 1 ba.

Nau'in Sensor: Haske (0x03)
Rahoton bambancin LightSensor
An kashe wannan tsohuwar aikin, don kunna wannan aikin ta saita saitin NO.13 ba zuwa sifili ba. Kuma idan an canza firikwensin haske zuwa ƙari ko rage ƙimar (saitin ta hanyar daidaitawa NO.13), na'urar za ta ba da rahoton bayanin haske ga nodes ɗin da ke rukunin 1.
Tsanaki 1: Kunna wannan aikin, zai haifar da Motsin PIR don kashe ganowa lokacin auna haske. A takaice dai, motsi na PIR zai makantar da dakika daya a cikin kowane minti daya.

Rahoton Lokaci
Bayan abin da ya haifar yana iya ba da rahoton saƙo, na'urar kuma tana goyan bayan rahoton halin da ba a nemi lokaci ba.

• Rahoton jihar Kofa/taga: Kowane awa 6 ana ba da rahoton sau ɗaya a tsohuwa. Ana iya canza shi ta saita saitin NO. 2.
• Rahoton matakin baturi: Kowane awanni 6 yayi rahoton sau ɗaya a tsoho. Ana iya canza shi ta hanyar saita sanyi NO. 8.
• Ƙananan rahoton baturi: Lokacin da matakin baturi ya yi ƙasa sosai. (Rasa rahoton baturi lokacin kunna wuta ko PIR.)
• Rahoton matakin firikwensin haske: Kowane sa'o'i 6 ana ba da rahoton sau ɗaya a cikin tsoho. Ana iya canza shi ta saita saitin NO. 9.
• Rahoton zafin jiki: Kowane sa'o'i 6 yana ba da rahoton sau ɗaya a cikin tsoho.
  Ana iya canza shi ta saita saitin NO. 10.

Sanarwa: Kanfigareshan NO. 8 na iya zama saita zuwa sifili don kashe rahoton ta atomatik. Kuma tsarin NO. 11 na iya canza tazarar kaska, ƙimar tsoho ita ce 30, idan saita zuwa 1, wannan yana nufin ƙaramin tazarar rahoton auto zai zama minti ɗaya.
Tsarin Ƙarfafa Ƙarfafawa
Duba Ikon Baturi
Lokacin da na'urar tayi ƙarfi, na'urar zata gano matakin ƙarfin batirin nan take. Idan matakin wutar yayi ƙasa sosai, LED zai ci gaba da walƙiya kamar daƙiƙa 5. Don Allah canza wani sabon baturi

Wayyo

Lokacin da na'urar ta kunna, na'urar za ta farka na kimanin daƙiƙa 20. A cikin wannan lokacin, mai sarrafawa zai iya sadarwa tare da na'urar. Yawanci na'urar koyaushe tana barci don adana ƙarfin baturi.

Tsaro Network
Na'urar tana goyan bayan aikin tsaro. Lokacin da aka haɗa na'urar tare da mai kula da tsaro, na'urar za ta canza ta atomatik zuwa yanayin tsaro. A cikin yanayin tsaro, umarni masu zuwa suna buƙatar amfani da Tsaro CC nannade don sadarwa, in ba haka ba, ba zai amsa ba.

• COMMAND_CLASS_VERSION_V3
• COMMAND_CLASS_MANUFACTURER_SPECIFIC_V2
• COMMAND_CLASS_DEVICE_RESET_LOCALLY
• COMMAND_CLASS_ASSOCIATION_V2
• COMMAND_CLASS_ASSOCIATION_GRP_INFO
• COMMAND_CLASS_POWERLEVEL
• UMARNI_CLASS_CONFIGURATION
• UMARNI_CLASS_NOTIFICATION_V8
• COMMAND_CLASS_FIRMWARE_UPDATE_MD_V4
• UMARNI_CLASS_BATTERY
• COMMAND_CLASS_SENSOR_MULTILEVEL_V11
• UMARNI_CLASS_WAKE_UP_V2

Yanayin Aiki
Akwai hanyoyi guda biyu "Test" da "Normal". "Yanayin Gwaji" shine don mai amfani ya gwada aikin firikwensin lokacin shigarwa. "Yanayin al'ada" don aiki na yau da kullun.
Ana iya canza yanayin aiki ta latsa maɓalli ko tamper key sau biyu. LED zai iya nuna yanayin da yake. Haske a kan daƙiƙa ɗaya yana nufin shigar da yanayin gwaji, walƙiya sau ɗaya yana nufin shigarwa

yanayin al'ada.
Lokacin da abin ya faru, yawanci LED ɗin ba zai nuna ba, sai dai idan baturin yana cikin ƙaramin matakin, LED ɗin zai yi haske sau ɗaya. Amma a cikin "Test Mode" LED kuma zai haskaka A kan dakika ɗaya.
Lokacin da abin ya faru, na'urar za ta fitar da siginar don kunna kayan aikin hasken wuta, waɗannan nodes suna cikin rukuni 2. Kuma jinkirta wani lokaci don kashe kayan wuta. An saita lokacin jinkiri

ta hanyar daidaitawa
An sake gano tazarar motsi na PIR, a cikin "Yanayin Gwaji" an daidaita shi zuwa 10 seconds. A cikin "Yanayin Al'ada", yana bisa ga saitin saitin NO. 6.
Sanarwa: Lokacin da tamper key na baya yana fitowa, na'urar koyaushe tana cikin "Yanayin Gwaji", komai saitin sauya DIP.

Zabar Wuri Mai hawa

Zaɓi wurin hawa domin motsin mai kutse da ake tsammanin zai tsallaka. tsarin ɗaukar hoto. Na'urar tana zuwa bangon bango. Kafin zabar wuri don Motsi
Ya kamata a lura da gano abubuwan da ke gaba:

1. Kada a sanya na'urar ganowa tana fuskantar taga / fan / yanayin iska ko hasken rana kai tsaye. Masu Gano Motsi ba su dace da amfani da su ba a wuraren ajiya ko wuraren da ba su da ƙarfi.
2. Kada a sanya na'urar ganowa kai tsaye sama ko fuskantar kowace tushen zafi, misali: gobara, radiators, tukunyar jirgi da sauransu.
3. Inda zai yiwu, matsa na'urar ganowa ta yadda hanyar ma'ana ta mai kutse za ta yanke tsarin fan maimakon kai tsaye zuwa wurin ganowa.

Shigar da baturi
Lokacin da na'urar ta ba da rahoton ƙarancin saƙon baturi, masu amfani yakamata su maye gurbin baturin. Nau'in baturi shine CR123A, 3.0V.
Don buɗe murfin gaban, bi matakan da ke ƙasa.

1. Yi amfani da screwdriver don sassauta dunƙule. (mataki na 1)
2. Riƙe murfin gaba da tura shi sama. (Mataki na 2)

Sauya baturin da sabon kuma maye gurbin murfin.

1. Daidaita ƙasa na murfin gaba tare da ƙananan murfin. (Mataki na 3).
2. Matsa saman murfin gaba don rufewa da kulle dunƙule. (Mataki na 4 da Mataki na 1)

Shigarwa

1. A karo na farko, ƙara na'urar zuwa cibiyar sadarwar Z-WaveTM. Na farko, tabbatar da cewa mai sarrafa na farko yana cikin yanayin haɗawa. Sannan danna tampMaɓalli sau uku a cikin daƙiƙa 2 don shigar da yanayin haɗawa. Bayan ƙara nasara, na'urar za ta farka don karɓar umarnin saitin daga Z-WaveTM Controller game da daƙiƙa 20. (koma zuwa fig. 1)
2. Bari mai sarrafawa ya haɗa na'urar zuwa rukuni na farko, duk wani wuta da ke nufin kunnawa lokacin da na'urar ta kunna don Allah a haɗa na'urar zuwa rukuni na biyu.
3. A cikin fakitin kayan haɗi, Akwai tef mai rufi biyu. zaka iya amfani da nau'in mai rufi biyu don gwajin a farkon. Hanyar da ta dace don shigarwa nau'in mai rufaffiyar nau'in nau'in nau'in nau'in nau'in nau'in nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i nau'i)) mai rufi shi ne manne shi zuwa matsayi na baya. firikwensin zai shiga yanayin gwaji, Kuna iya gwada idan wurin da aka shigar yana da kyau ko a'a ta wannan hanyar (koma zuwa siffa 2 da fig. 3)

HANKALI:
Hanyar shigar da ruwan tabarau yana ƙasa.
Gargadi:

1. Kafin a shigar da samfurin, da fatan za a tabbatar da tsabtar saman. Musamman ga fuskar gilashi da itace, kiyaye shi bushe kafin shigarwa.
2. Ana ba da shawarar sosai don danna samfurin akan tef mai gefe biyu don 30 seconds.

Saitunan Sanya Z-Wave

	Suna	Def.	M	A	B	C	E	Bayani
1	Asalin Matsayin Saiti	0xFF ku	0 ~ 99 ,0xFF	þ	þ	o	þ	Saita ƙimar umarnin BASIC don kunna haske. Don kayan aikin dimmer 1 zuwa 99 yana nufin ƙarfin haske.0 yana nufin kashe hasken. 0xFF yana nufin matakin ƙarshe don Canja-mataki masu yawa.
2	Lokacin Rahoto Kofa/Taga	12	0 ~ 127	þ	o	þ	þ	Tazarar lokacin rahoton auto yanayin kofa/taga. 0 yana nufin kashe rahoton auto kofa/jihar taga. Matsakaicin ƙimar shine 12. Lokacin kaska iya saitin ta hanyar daidaitawa No.11.
3	Pir Hankali	99	0 ~ 99	þ	þ	o	þ	Saitunan hankali na PIR. 0 yana nufin kashe motsin PIR. 1 yana nufin mafi ƙarancin hankali, 99 yana nufin mafi girman hankali. Ana iya gano nisa mai tsayi, amma idan akwai ƙarin siginar amo a cikin muhalli, shi zai sake haifar da mitar.
4	Yanayin Aiki	0 x31	Duka					Yanayin aiki. Amfani da bit don sarrafawa.
		1		þ	þ	þ	þ	Bit0: Saita ma'aunin zafin jiki. (1: Fahrenheit, 0:Celsius)
		0		-	-	-	-	Bit1: Adana
		0		þ	o	þ	þ	Bit2: Kashe aikin kofa/taga. (1: A kashe, 0: Kunna)
		0		-	-	-	-	Bit3: Adana

	Suna	Def.	M	A	B	C	E	Bayani
		1		þ	þ	þ	o	Bit4: Kashe rahoton haskakawa bayan faruwar lamarin. (1: A kashe, 0: Kunna)
		1		þ	þ	þ	þ	Bit5: Kashe rahoton zazzabi bayan faruwar lamarin. (1: Kashe, 0: Enable)
		0		-	-	-	-	Bit6: Ajiye
		0		-	-	-	-	Bit7: Ajiye
5	Aikin Abokin Ciniki	0 x13	Duka					Canjin aikin abokin ciniki, ta amfani da sarrafa bit.
		1		þ	þ	þ	þ	Bit0: TampKunna/Kashe (1: Kunnawa, 0: Kashe)
		1		þ	þ	þ	þ	Bit1Jajayen LED Kunnawa / Kashe (1: Kunnawa, 0: Kashe)
		0		þ	þ	o	þ	Bit2: Kashe Motsi. (1: Kunnawa, 0: A kashe) Lura: Ya dogara da Bit2, 1: Rahoton Sanarwa CC, Nau'in: 0x07, Lamarin: 0xFE
		10		þ	þ	þ	þ	Bit3,Bit4: Fara aikin kunnawa / kashewa. 00: Kashe 01: Ƙofa / Taga Yana kunna, An kashe PIR 10: Kunna PIR, Ƙofa / Taga An kashe 11: PIR & Ƙofa / Kunna taga
		0		þ	o	þ	þ	Bit5: Ƙofa/Taga Matsala Basic kunna/kashe aikin. 0: Buɗe Ƙofa/Taga 1: Rufe Ƙofa/Taga
		0		-	-	-	-	Bit6: Adana

	Suna	Def.	M	A	B	C	E	Bayani
		0		-	-	-	-	Bit7: Ajiye
6	PIR sake- Gano Lokacin Tazara	6	1 ~ 60	þ	þ	o	þ	A cikin yanayin al'ada, bayan an gano motsin PIR, saita lokacin sake ganowa. 10 seconds kowace kaska, tsoho tick shine 6 (60 seconds). Saita darajar da ta dace don hanawa an karɓi siginar faɗa akai-akai. Hakanan zai iya ajiye ƙarfin baturi. Sanarwa: Idan wannan ƙimar ta fi girman saitin saitin NO. 7 Akwai wani lokaci bayan an kashe hasken kuma PIR bai fara ganowa ba.
7	Kashe Lokacin Haske	7	1 ~ 60	þ	þ	þ	þ	Bayan kunna hasken, saita lokacin jinkiri don kashe hasken lokacin da ba'a gano motsin PIR ko kofa / windows ba. 10 seconds kowace kaska, tsoho tick shine 7 (daƙiƙa 70). 0 yana nufin kada a kashe wuta umarni.
8	Rahoton Batirin Kai tsaye	12	0 ~ 127	þ	þ	þ	þ	Lokacin tazarar don bayar da rahoton matakin baturi ta atomatik. 0 yana nufin kashe batir rahoton auto. Ƙimar tsoho ita ce 12. Lokacin kaska na iya saitawa ta hanyar daidaitawa Na 11.
9	Rahoton Auto LightSenso r Time	12	0 ~ 127	þ	þ	þ	o	Lokacin tazarar don bayar da rahoton hasken. Ƙimar tsoho ita ce 12. Lokacin kaska na iya saitawa ta hanyar daidaitawa Na 11.

	Suna	Def.	M	A	B	C	E	Bayani
10	Auto Report Temperatu re Time	12	0 ~ 127	þ	þ	þ	þ	Lokacin tazarar don rahoton zafin jiki ta atomatik. Ƙimar tsoho ita ce 12. Lokacin kaska na iya saitawa ta hanyar daidaitawa Na 11.
11	Rahoton Tick na Tazara	30	0 ~ 0xFF	þ	þ	þ	þ	Lokacin tazarar don rahoton atomatik kowane kaska. Saita wannan tsari zai haifar da saitin No.2, No.8, No.9 da No.10. Naúrar tana da minti 1.
12	Temperatu re Bambancin Rahoton	2	1 ~ 100	þ	þ	þ	þ	Bambancin zafin jiki don bayar da rahoto. 0 yana nufin kashe wannan aikin. Naúrar ita ce 0.5 Celsius. Kunna wannan aikin na'urar za ta gano a cikin 30 seconds. Kuma idan zafin ya wuce Fahrenheit digiri 140, zai ci gaba da rahoto. Kunna wannan aikin zai haifar da matsala don Allah duba daki-daki a ciki sashen "Rahoton Zazzabi".
13	Rahoton Daban-daban na LightSenso	20	1 ~ 100	þ	þ	þ	o	Bambancin LightSensor don bayar da rahoto. 0 yana nufin kashe wannan aikin. Naúrar kashi cetage. Kunna wannan aikin na'urar za ta gano a cikin 10 seconds. Kuma lokacin da hasken Sensor ya wuce 20 kashi daritage, zai ci gaba da bayar da rahoto.
14	Farashin PIR	1	1 ~ 3	þ	þ	o	o	Yanayin Ƙarfafa PIR:

	Suna	Def.	M	A	B	C	E	Bayani
	Yanayin							Yanayin1: Yanayin al'ada2: Yanayin Rana3: Dare
15	Pir NightLine	100	1 ~ 10000	þ	þ	o	o	Yanayin layin dare na PIR Lux: LightSensor yana ƙayyade ko matakin dare ne. (Raka'a 1 Lux)

Specific Mai ƙira	2	Matsayin Tsaro Mafi Girma
Baturi	1	Matsayin Tsaro Mafi Girma
Sensor na Multilevel	11	Matsayin Tsaro Mafi Girma
Tashi	2	Matsayin Tsaro Mafi Girma
Mai nuna alama	3	Matsayin Tsaro Mafi Girma
Multi Channel Associationungiyar	3	Matsayin Tsaro Mafi Girma

Ajin Z-Wave mai Tallafawa

Class Class	Sigar	Ajin Tsaro da ake buƙata
Z-Wave Plus fo Bayani	2	Babu
Sigar	3	Babu
Kulawa	1	Babu
Sabis na Sufuri	2	Babu
Tsaro 2	1	Babu
Sake saitin na'ura a gida	1	Matsayin Tsaro Mafi Girma
Ƙungiya	2	Matsayin Tsaro Mafi Girma
Bayanin Rukunin Ƙungiya	3	Matsayin Tsaro Mafi Girma
Gidan wuta	1	Matsayin Tsaro Mafi Girma
Kanfigareshan	4	Matsayin Tsaro Mafi Girma
Sanarwa	8	Matsayin Tsaro Mafi Girma
Firmware Sabunta Meta Data	5	Matsayin Tsaro Mafi Girma

Specific Mai ƙira	2	Matsayin Tsaro Mafi Girma
Baturi	1	Matsayin Tsaro Mafi Girma
Sensor na Multilevel	11	Matsayin Tsaro Mafi Girma
Tashi	2	Matsayin Tsaro Mafi Girma
Mai nuna alama	3	Matsayin Tsaro Mafi Girma
Multi Channel Associationungiyar	3	Matsayin Tsaro Mafi Girma

Shirya matsala

Alama	Dalilin Kasawa	Shawara
Na'urar ba za ta iya haɗawa zuwa cibiyar sadarwar Z-Wave ™ ba	Na'urar na iya a cikin hanyar sadarwar Z-Wave™.	Cire na'urar sannan sake haɗawa.

zubarwa

Wannan alamar tana nuna cewa bai kamata a zubar da wannan samfurin tare da sauran sharar gida a cikin EU ba. Don hana yiwuwar cutar da muhalli ko lafiyar ɗan adam daga zubar da sharar da ba a sarrafa ba, sake yin amfani da shi cikin alhaki don haɓaka ci gaba da sake amfani da albarkatun ƙasa. Don dawo da na'urar da aka yi amfani da ita, da fatan za a yi amfani da tsarin dawowa da tattarawa ko tuntuɓi dillalin da aka siyo samfurin. Za su iya ɗaukar wannan samfur don sake amfani da lafiyar muhalli.
Kamfanin Fasaha na Philio
8F., No.653-2, Zhongzheng Rd., Xinzhuang Dist., New Taipei City 24257, Taiwan (ROC)  www.philio-tech.com

Bayanin Tsangwama na FCC

An gwada wannan kayan aikin kuma an same shi don yin aiki da iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga kutsawa mai cutarwa a cikin shigarwar mazaunin. Wannan kayan aiki yana haifarwa, yana amfani da kuma zai iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar da shi ba kuma akayi amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani shigarwa na musamman ba. Idan wannan kayan aiki ya haifar da tsangwama mai cutarwa ga rediyo ko liyafar talabijin, wanda za'a iya tantance shi ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara kutse ta ɗayan matakan masu zuwa:

• Sake daidaitawa ko matsar da eriya mai karɓa.
• Ƙara rabuwa tsakanin kayan aiki da mai karɓa.
• haɗa kayan aiki a cikin wani maɓalli a kan wani kewaye daban da wanda aka haɗa mai karɓa zuwa gare shi.
• Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

Wannan na'urar ta bi Sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

1. Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma
2. Dole ne wannan na'urar ta karɓi duk wani tsangwama da aka karɓa, gami da tsangwama wanda zai iya haifar da aiki maras so.

FCC Tsanaki: Duk wani canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa wannan kayan aikin.
Wannan mai watsawa dole ne a kasance tare ko aiki tare tare da kowane eriya ko mai watsawa.

Gargadi
Kada a zubar da kayan wuta azaman sharar birni mara amfani, yi amfani da wuraren tattara abubuwa daban. Tuntuɓi karamar hukumar ku don bayani game da tsarin tarawa. Idan aka zubar da kayan lantarki a kwandon shara ko kuma juji, abubuwa masu haɗari na iya malalawa cikin ruwan karkashin kasa kuma su shiga cikin sarkar abinci, suna cutar da lafiyarku da lafiyarku. Lokacin maye gurbin tsofaffin kayan aiki da sabo sau ɗaya, an wajabtawa dillalin dawo da tsohuwar kayan aikinku don zubar aƙalla kyauta.

Takardu / Albarkatu

	Philio PST10 4-in-1 Multi Sensor [pdf] Jagoran Jagora PST10, 4-in-1 Multi Sensor, PST10 4-in-1 Multi Sensor
	PHILIO PST10 4 a cikin 1 Multi-Sensor [pdf] Manual mai amfani PST10 4 a cikin 1 Multi-Sensor, PST10, 4 a cikin 1 Multi-Sensor, Multi-Sensor, Sensor

Magana

• Manual mai amfani