PHILIPS DMC2 Jagoran Shigar Mai Kula da Modular

Mai Kula da Modular DMC2
Shafin 1.0
Jagoran Shigarwa

Game da wannan Jagora

Ƙarsheview
An tsara wannan jagorar don taimakawa wajen shigar da DMC2 Modular Controller.
Ana buƙatar ilimin aiki na hanyoyin ƙaddamar da Dynalite don amfani da wannan takaddar yadda ya kamata. Don ƙarin bayani kan tsarin ƙaddamarwa, tuntuɓi Jagorar Kwamishina DMC2.

Disclaimer
Philips Dynalite ne ya shirya waɗannan umarnin kuma suna ba da bayanai kan samfuran Philips Dynalite don amfani da masu rajista. Ana iya maye gurbin wasu bayanai ta hanyar canje-canje ga doka da kuma sakamakon haɓakar fasaha da ayyukan masana'antu.
Duk wani nuni ga samfuran da ba na Philips Dynalite ko web hanyoyin haɗin yanar gizo ba su ƙunshi amincewa da waɗannan samfuran ko ayyuka ba.
Haƙƙin mallaka
© 2015 Dynalite, DyNet da tambura masu alaƙa alamun kasuwanci ne masu rijista na Koninklijke Philips Electronics NV Duk sauran alamun kasuwanci da tambura mallakin masu su ne.

Samfurin Ƙarsheview

Philips Dynalite DMC2 shine mai sarrafa na'ura mai mahimmanci wanda ya ƙunshi tsarin samar da wutar lantarki, tsarin sadarwa, da har zuwa nau'ikan sarrafawa guda biyu masu musanyawa.
An jera tsarin wutar lantarki da sadarwa a ƙasa:

• DSM2-XX - Samfuran samar da lokaci-ɗaya ko matakai uku waɗanda ke ba da iko ga hanyoyin sadarwa da na'urori masu sarrafawa.
• DCM-DyNet - Tsarin sadarwa wanda ke goyan bayan DyNet, DMX Rx, busassun bayanan lamba, da shigarwar UL924.

Nau'o'in sarrafawa iri-iri suna ba da kulawar lokaci ɗaya na nau'ikan kaya da iyawa da yawa:

• DMD - Tsarin sarrafa direba don 1-10V, DSI, da direbobin DALI.
• DMP – Module sarrafa dimmer na lokaci don fitarwar Jagora ko Trailing Edge, dacewa don amfani tare da yawancin nau'ikan direbobin lantarki masu dimmable.
• DMR – Tsarin sarrafawa na Relay don yawancin nau'ikan lodin da aka canza.

DMC2 na iya zama saman ƙasa ko ɗaurawa kuma yana fasalta nau'ikan ƙwanƙwasa igiyoyi don ɗaukar nau'ikan sadarwa, samarwa, da daidaitawar kaya.

Bayanan Bayani na DMC2
Yadin DMC2 wani akwati ne mai galvanized karfe mai rufin gaba da foda. Ya haɗa da abubuwan hawa don tsarin samar da wutar lantarki, tsarin sadarwa, da na'urorin fitarwa guda biyu.
Girma

Zane-zane
Saukewa: DSM2-XX
DSM2-XX ya dace a cikin saman module bay na shinge kuma yana ba da iko ga hanyoyin sadarwa da sarrafawa.
Girma / zane-zane

Saukewa: DMD31X
Tsarin DMD31X mai sarrafa siginar tashoshi uku ne. Ana iya daidaita kowane tashoshi daban-daban zuwa DALI Broadcast, 1-10V, ko DSI.
Girma
DMD31X module fitarwa wayoyi
Dole ne a ƙare siginar sarrafawa a cikin manyan tashoshi shida akan tsarin. Dole ne a ƙare da'irar wutar lantarki a cikin tashoshi shida na ƙasa kamar yadda aka nuna a cikin zanen da ke ƙasa. Tabbatar cewa kowane sigina da tashar wuta an haɗa su kuma an ware su daidai.
Don shigarwa wanda ya ƙunshi da'irori 120 VAC kawai:
Wire duk da'irori na fitarwa ta amfani da madugu masu dacewa da Class 1 / Haske da da'irori masu ƙarfi waɗanda aka ƙididdige mafi ƙarancin 150 V. Ana iya haɗuwa da masu sarrafa siginar da'ira tare da na'urar da'ira na reshe a cikin ma'aunin waya. Ana iya la'akari da masu sarrafa sigina a matsayin masu gudanarwa na Class 2. Ana iya amfani da hanyoyin wayoyi na aji 2 don da'irar sarrafa sigina a wajen kwamitin kula da DMC.
Don shigarwa wanda ya haɗa da da'irori 240 ko 277 VAC:
Wire duk da'irori fitarwa ta amfani da madugu masu dacewa da Class 1 / Haske da na'urorin Wutar da aka ƙididdige 300V min. Ana iya haɗuwa da masu sarrafa siginar da'ira tare da na'urar da'ira na reshe a cikin ma'aunin waya. Dole ne a ɗauki masu sarrafa sigina a matsayin masu gudanarwa na Class 1. Dole ne a yi amfani da hanyoyin wayoyi na Class 1 / Haske da Wutar wutar lantarki don da'irar sarrafa sigina a wajen kwamitin kula da DMC.
Saukewa: DMP310-GL
DMP310-GL mai sarrafa dimming ne mai yanke-tsayi, zaɓaɓɓen software tsakanin gefen jagora da gefen baya, kuma yana dacewa da mafi yawan direbobi masu lalacewa.
Girma / zane-zane

Saukewa: DMR31X
Tsarin DMR31X shine mai sarrafa tashoshi uku, mai ikon sarrafa yawancin nau'ikan kayan da aka canza, gami da hasken wuta da sarrafa mota.
Girma / zane-zane

Shigarwa

Ana jigilar shingen DMC2 da kayayyaki daban kuma an haɗa su akan wurin. Wannan sashe yana bayyana buƙatu da hanya don hawa da haɗuwa.
Ƙarshen Shigarwaview

1. Tabbatar cewa an cika duk buƙatun shigarwa
2. Cire faranti na ƙwanƙwasa don igiyoyi
3. Ƙulli na dutsen
4. Shigar da kayayyaki
5. Haɗa igiyoyi
6. Ƙarfafawa da gwaji naúrar

Muhimman Bayanai
GARGADI: Keɓance daga keɓaɓɓen hanyoyin sadarwa kafin ƙarewa ko daidaita kowane tashoshi. Babu sassa masu hidima a ciki. Sabis ta ƙwararrun ma'aikata kawai. Muna ba da shawarar ku karanta wannan gabaɗayan takaddar kafin a fara shigarwa. Kada ku ƙarfafa DMC har sai duk matakan shigarwa dalla-dalla a cikin wannan babin sun cika.
Shigar da gida da gini na sarrafa kansa da tsarin sarrafawa zai bi HD60364-4-41 idan an zartar.
Da zarar an haɗa, kunna wuta, kuma ƙare daidai, wannan na'urar za ta yi aiki a yanayin asali. Wani sabon mai amfani da Philips Dynalite akan hanyar sadarwa iri ɗaya zai kunna duk tashoshi na hasken wuta daga maɓalli 1 da kashewa daga maɓalli 4 yana ba da damar gwada igiyoyin cibiyar sadarwa da ƙarewa. Ana iya daidaita manyan ayyuka da saiti na al'ada ta hanyar software na ƙaddamar da EnvisionProject.
Idan ana buƙatar sabis na ƙaddamarwa, tuntuɓi mai rarrabawa na gida don cikakkun bayanai.
Ya kamata a sarrafa wannan na'urar daga nau'in wadata da aka kayyade akan na'urorin da aka shigar.
Dole ne wannan na'urar ta zama ƙasa.
Kar a gwada Megger kowane na'ura mai haɗawa da tsarin dimming, saboda lalacewar na'urar na iya haifar da lalacewa.
GARGADI: Dole ne a rage kuzarin DMC kafin a daina sarrafawa da igiyoyin bayanai.
Bukatun shigarwa
An tsara DMC2 don amfanin cikin gida kawai. Idan an shigar da shi a waje, dole ne a ajiye DMC2 a cikin wurin da ya dace. Zaɓi wurin busasshen da za a iya samu bayan an gama shigarwa.
Don tabbatar da isasshen sanyaya, dole ne ka hau DMC2 a tsaye, kamar yadda aka nuna a ƙasa.
DMC2 yana buƙatar tazarar iska na aƙalla 200mm (inci 8) a duk bangarorin murfin gaba don isassun iskar iska. Wannan gibin kuma yana tabbatar da cewa na'urar tana iya aiki yayin da har yanzu tana kan sa. Yayin aiki, DMC2 na iya fitar da wasu kararraki kamar humming ko relay chatter. Yi la'akari da wannan lokacin zabar wurin hawa.
Kashewa
Cire faranti ƙwanƙwasa da ake buƙata don igiyoyin samarwa kafin hawa shingen.
DMC2 ya haɗa da ƙwanƙwasa igiyoyi masu zuwa. Ya kamata igiyoyi su shiga cikin shingen ta hanyar ƙwanƙwasa mafi kusa zuwa tsarin da ya dace.
Bayarwa/Mallaka: Sama: 4 x 28.2mm (1.1”) 2 x 22.2mm (0.87”)
Gede: 7 x 28.2 (1.1 ") 7 x 22.2mm (0.87")
Baya: 4 x 28.2mm (1.1 ") 3 x 22.2mm (0.87")
Bayanai: Gefe: 1 x 28.2mm (1.1 ")
Ƙasa: 1 x 28.2mm (1.1 ")
Ƙwaƙwalwar 28.2mm (1.1 ") sun dace da magudanar ruwa na 3/4 ", yayin da 22.2mm (0.87 ") ƙwanƙwasa sun dace da hanyar 1/2".
Kebul ɗin da aka ba da shawarar don haɗin kai zuwa tashar tashar jiragen ruwa ana duba shi madaidaicin kebul ɗin bayanan CAT-485E mai dacewa da RS5 tare da murɗaɗɗen nau'i-nau'i uku. Koma zuwa umarnin shigarwa don tsarin sadarwa don ƙarin bayanin cabling. Dole ne a keɓance wannan kebul daga mains da igiyoyi na Class 1 kamar yadda lambar lantarki ta gida ta ke. Idan igiyoyin kebul da ake tsammani sun wuce mita 600 don kebul na serial, tuntuɓi dillalin ku don shawara. Kar a yanke ko ƙare igiyoyin bayanan kai tsaye. DSM2-XX module shigar tashoshi sun yarda da kayan aiki igiyoyi har zuwa 16mm 2. Ya kamata igiyoyi masu samar da wutar lantarki su sami ƙarfin 32A a kowane lokaci don samar da matakai uku ko har zuwa 63A don lokaci guda don ba da damar yin amfani da na'urar zuwa iyakar ƙarfinta. Mashigin Duniya yana cikin sashin DMC kusa da saman karar. Idan hawa naúrar zuwa tiren kebul ko samfurin irin na Unistrut, zaku iya haɗa igiyoyi tsakanin naúrar da saman hawa don shigar da shingen ta hanyar ƙwanƙwasawa a fuskar baya. Kebul na sarrafawa / sadarwa suna shiga a kasan shingen. Kar a taɓa gudanar da igiyoyi masu sarrafawa ta hanyar mains voltage sashen yadi.
GARGADI: Kar a cire kowane tambari ko lambobi daga igiyoyi, wayoyi, kayayyaki ko wasu abubuwan haɗin gwiwa a cikin DMC. Yin hakan na iya keta dokokin tsaro na gida.
Farashin DMC2
DMC2 na iya zama saman ƙasa ko a ɗaura hutu. Hawan saman yana amfani da maki huɗu masu hawa, wanda aka nuna a ƙasa:

Ana goyan bayan hawan ramuka guda hudu masu dacewa da maɗauran M6 (1/4 "), biyu a kowane gefen shinge kamar yadda aka nuna a ƙasa.
Matsakaicin tazara tsakanin ingarma shine 380mm (15"), kuma ƙaramin zurfin hawa shine 103mm (4.1").

Tabbatar cewa babu ƙura ko wasu tarkace da ke shiga na'urar yayin shigarwa. Kada ka bar murfin gaban a kashe na kowane tsawon lokaci. Ƙura mai yawa na iya tsoma baki tare da sanyaya.
Sakawa da haɗa kayayyaki
Na'urori masu sarrafawa sun dace a ko'ina na hawa, kuma zaka iya shigar da kowane nau'i biyu a cikin raka'a ɗaya. Ana haɗa na'urorin sarrafawa zuwa na'urar samar da kayan aiki tare da kayan aikin wayoyi da aka kawo, da kuma zuwa bas ɗin sadarwa tare da haɗin kebul na ribbon a gefen hagu na shingen.
Sanya kayayyaki:

1. Dutsen shingen ta amfani da ɗayan hanyoyin da aka bayyana a cikin 2.3 Hawan DMC2.
2. Dutsen tsarin sadarwa a ƙasan babban-voltage katanga. Koma zuwa umarni a cikin 2.4.1 DCM-DyNet.
3. Dutsen tsarin samar da wutar lantarki a saman shingen. Koma zuwa umarni a cikin 2.4.2 DSM2-XX.
4. Hana na'urori masu sarrafawa a cikin sauran wurare na module. Ana iya hawa kowane nau'i a kowane wuri kuma ana iya barin wurin fanko. Koma zuwa umarni a cikin 2.4.3 Control module shigarwa, da kuma Saurin Shiga Jagoran da aka bayar tare da kowane module.
5. Haɗa madaidaicin igiyar waya da aka kawo zuwa samfuran. Yi amfani da dunƙule kawai da aka kawo tare da naúrar, kuma kada ku canza madaurin ta kowace hanya. Koma zuwa 2.4.4 Waya loom.
6. Duba kuma ja da baya duk tashoshi. Cire ƙwanƙwasa da ake buƙata daga farantin murfin saman, sannan a sake haɗa farantin murfin zuwa naúrar kuma a tabbata an ɗaure duk screws amintacce. Manna alamomin da aka bayar tare da kayayyaki akan murfin don nuna abin da aka shigar a kowane wuri.
7. Sake haɗa farantin murfin ƙasa kuma a tabbata an ɗaure duk screws amintacce.

Module Sadarwa – DCM-DyNet
An ɗora samfurin DCM-DyNet a cikin ɓangaren ƙasa na shinge, a ƙasan babban voltagda katanga.
Cire fim ɗin kariya daga faifan maɓalli kafin shigar da wannan ƙirar.
Saka DCM-DyNet:

1. Daidaita jumper dake kusa da mai haɗin kebul na ribbon don zaɓar DyNet vol da ake buƙatatage: 12V (tsohuwar masana'anta) ko 24V.
   
2. Haɗa kebul na ribbon mai sarrafawa daga ƙirar zuwa bas ɗin sadarwa na DMC.
   
3. Daidaita shafin hawa tare da ramin a gefen hagu kuma zamewa tsarin zuwa matsayi.
   
4. Tsare ƙirar ƙirar ta amfani da madaidaicin dunƙule a hannun dama. Ya kamata naúrar ta zauna amintacciya ba tare da motsi ba.
   Shigar DCM-DyNet yanzu ya cika.

Module mai bayarwa - DSM2-XX
An ɗora tsarin DSM2-XX a cikin babban ɓangaren shingen.
Saka DSM2-XX:

1. Haɗa filogin samar da 24VDC Class 2/SELV zuwa soket na hanya biyu a bayan soket ɗin bas ɗin sadarwa na DMC. Lura cewa ana samun wutar lantarki ta ciki daga lokaci L1. Don daidaitaccen aiki na naúrar, tabbatar da cewa wadata akan lokaci L1 yana kasancewa koyaushe.
   
2. Nemo shafin kuma zame samfurin zuwa matsayi kamar yadda aka nuna.
   
3. Tsare ƙirar ƙirar ta amfani da madaidaicin dunƙule a hannun dama. Ya kamata naúrar ta zauna amintacciya ba tare da motsi na zahiri ba.
   
4. Kashe hanyoyin samar da wayoyi zuwa gefen dama na tashoshi da kuma zuwa sandar duniya a gefen dama na shingen.
   
5. Kashe ƙungiyar samar da ma'aunin waya zuwa gefen hagu na tashoshi. Koma zuwa 2.4.4 Waya loom don ƙarin bayani.
   
6. Sake bincika duk skru na ƙarshe kuma ƙara ƙarfi kamar yadda ake buƙata.
   

Sarrafa tsarin shigarwa
Ana iya shigar da Modulolin sarrafawa a kowane wurin da aka samu a cikin sashin DMC.
Saka tsarin sarrafawa:

1. Dutsen magudanar ruwa. Yi amfani da masu watsewar da'ira kawai da aka tanadar a cikin kayan shigarwa, daidaitacce ta yadda za su keɓe lokacin da aka canza su zuwa gefen fitarwa kamar yadda aka nuna.
   
2. Haɗa kebul ɗin sarrafa SELV/Class 2 tsakanin ƙirar da bas ɗin sadarwa na DMC.
   
3. Nemo shafin kuma zamewa tsarin zuwa matsayi.
   
4. Tabbatar da tsarin ta amfani da madaidaicin dunƙule a gefen dama. Ya kamata naúrar ta zauna amintacciya ba tare da motsi na zahiri ba.
   
5. Kashe wayoyi shigar da kayan aikin na'urar zuwa gefen dama na masu watsewar kewayawa.
   
6. Kashe rukunin Module masu dacewa na ma'aunin waya zuwa gefen hagu na masu watsewar kewayawa.
   
7. Sake duba duk skru na ƙarshe kuma ƙara su.
   

Shigar da tsarin sarrafawa yanzu ya cika. Za a iya ƙare ƙungiyoyin masu kunna walƙiya/ɗaukarwa a cikin tashoshin fitarwa na module.
Lura: Koma zuwa 1.3.2 DMD31X module fitarwa wayoyi don ƙarin bayani kafin ƙarewa DMD31X module lodi.
Wayar hannu
An ƙera maƙallan wiring na DMC don tabbatar da daidaitattun wayoyi daga tsarin samar da wutar lantarki zuwa na'urorin sarrafawa. Ana gudanar da ƙarewar kowane nau'i a cikin tsarin da ake buƙata tare da maƙallan filastik a sarari. Tabbatar cewa alamun da ke kan kowane sashi ya dace da wayoyi na kowane tsarin, kamar yadda aka nuna a nan. Don na'urorin da ke buƙatar ƙarewa, cire baƙaƙen insulating daga wayoyi kafin ƙare kayan aiki da kayayyaki.
Gargadi: Yi amfani da igiyar waya kawai da aka kawo tare da naúrar, kuma kar a karya ko gyara madaurin ta kowace hanya.
Kula don tabbatar da cewa ba a kama wayoyi a ƙarƙashin murfin lokacin rufe na'urar ba. Baƙaƙen iyakoki masu rufewa a kan kayan doki za a cire su ne kawai lokacin da aka haɗa su zuwa wani tsari. Idan ba a yi amfani da ɗaya ba, tabbatar an haɗe su amintacce kuma mai haɗin da ke ƙasa ba a fallasa. Idan ba'a samu baƙaƙen wayoyi ba, wayoyi da ba a yanke ba dole ne a kiyaye su tare da mai keɓewar wutar lantarki mai ƙima kafin DMC ta sami kuzari.

Gwajin bayan shigarwa

Idan kuna buƙatar ƙarfafa da'irori masu ɗaukar nauyi akan DMC kafin haɗa shi zuwa sauran hanyar sadarwar, zaku iya maye gurbin murfin kuma kunna na'urar nan da nan. Shirye-shiryen masana'anta na asali yana saita duk tashoshi zuwa fitarwa 100%.
Don ƙarin bayani kan gwaji da hanyoyin magance matsala, ziyarci https://dynalite.org/
LEDs sabis da canza
DMC tana da LED ɗin sabis na kore da ja. LED guda daya ne kawai ake kunnawa a lokaci guda:

• Green: An kunna DyNet Watchdog kuma an gano siginar 'zuciyar' cibiyar sadarwa
• Ja: DyNet Watchdog ya ƙare ko ya ƙare (yana nuna yiwuwar kuskuren hanyar sadarwa)

Ana watsa siginar ' bugun zuciya' lokaci-lokaci akan DyNet ta wasu na'urori na cibiyar sadarwa kamar ƙofofin ƙofofin, ba da damar DMC cikin sauƙi don sanin ko har yanzu tana da alaƙa da sauran hanyar sadarwa.
Don ƙarin bayani kan daidaita saitunan DMC's Watchdog, koma zuwa Jagorar Kwamishina DMC2.
LED mai aiki yana nuna ɗaya daga cikin alamu uku:

• Kiftawa a hankali: Aiki na yau da kullun
• Kiftawa da sauri: Aiki na yau da kullun, an gano ayyukan cibiyar sadarwa
• Har abada ON: Laifi

Canjin sabis yana kunna ayyuka masu zuwa:

• Latsa ɗaya: aika ID na cibiyar sadarwa
• Latsa biyu: Saita duk tashoshi zuwa Kunnawa (100%)
• Latsa ka riƙe na tsawon daƙiƙa huɗu, sannan saki: Sake saita na'urar
  

Maɓallin sharewa da hannu
GARGADI: Juyewar da hannu baya samar da keɓewa ta dindindin. Ware kan kayan aiki kafin yin aiki akan da'irar lodi.
Da zarar an gama shigar da DMC2 da kuzari, zaku iya cire farantin murfin ƙasa kuma kuyi amfani da faifan maɓalli akan tsarin DCM-DyNet don gwada kowane tsari da tashoshi a cikin na'urar.

• Danna maɓallin Zaɓin Module don zaɓar tsarin don gwaji. Idan ba a gano na'ura ba, mai nuna alama zai tsallake ta atomatik zuwa na gaba module.
• Hasken CHANNEL na kowane tashoshi yana nuna ko tashar ta kashe/ba a amfani da ita (0%) ko A kunne (1-100%). Ana nuna kuskuren tashoshi ta hanyar haske mai walƙiya.
• Danna maɓallin lambar tashar don kunna tashar tsakanin Kashe (0%) da Kunnawa (100%).

Maɓallin maɓalli yana ƙarewa bayan daƙiƙa 30. A wannan lokacin, faifan maɓalli yana kashe amma duk tashoshi suna kasancewa a matakin da suke yanzu.

2015 Koninklijke Philips Kayan lantarki NV
An kiyaye duk haƙƙoƙi.
Philips International BV
Netherlands
DMC2
Bitar daftarin aiki: B
Gwajin bayan shigarwa