Pipi harsashi PILS01 Ladder Shelf Littafin 4 Tier Shelf

Bayanin samfur

Ƙayyadaddun bayanai:

• Samfura: PLS01
• Girma:
  • Jirgin [G]: 300 x 310mm
  • Jirgin [F]: 300 x 280mm
  • Jirgin [E]: 300 x 245mm
  • Jirgin [D]: 300 x 210mm
• Abu: Itace da Karfe
• Yawan Nauyi: Har zuwa X lbs

Umarnin Amfani da samfur

Mataki 1: Tattauna Sanduna da Ƙarshen Tafkunan
Amintattun sanduna [B] da [C] don hawa [G]. Haɗa iyakoki na ƙarshe [I] zuwa kasan sanduna [B] da [C]. Yi amfani da bolts J da kayan aikin da aka bayar.

Mataki 2: Haɗa Manyan Frames
Amintaccen firam ɗin saman [A] zuwa sanduna [B] da [C] ta amfani da kusoshi J.

Mataki na 3: Haɗa Alloli
Amintattun allunan [F], [E], da [D] zuwa firam ɗin da aka haɗa ta amfani da kusoshi J.

Mataki na 4: Haɗa Brace Brace
Haɗa takalmin gyaran kafa [H] ta amfani da kusoshi K da L.

Mataki na 5: Tsare Brace Brace
Amintaccen takalmin gyaran kafa [H] zuwa gefen baya na shiryayye ta amfani da kusoshi K da L.

Mataki na 6: Hawan bango
Don shigar da ingarman itace, bi matakai 6A-1 da 6A-2. Don kankare, ƙaƙƙarfan bango, ko shigarwa bangon bulo, bi matakan 6B-1 da 6B-2.

6A Don Shigar Tushen itace:

1. Saka faifan tsani a matsayi kuma yi alama ramuka akan layin tsakiyar ingarma.
2. Hana ramuka a cikin ingarman itace.
3. Ƙarfafa dunƙule [O] a kan shiryayye.

6B Don Ƙaƙwalwar Ƙaƙƙarfan bango, Ƙaƙƙarfan bango, ko Shigar bango:

1. Alama rami don ankaren bango [N] da huda rami.
2. Amintaccen farantin L-dimbin yawa [M] zuwa jirgi [D].
3. Yi amfani da guduma don buga ankaren bango cikin bango kuma ƙara dunƙule [O] a kan shiryayye.

Tambayoyin da ake yawan yi (FAQ):

• Tambaya: Menene ma'aunin nauyi na shiryayyen tsani?
  A: Shelf ɗin tsani yana da ƙarfin nauyin X lbs, yana tabbatar da ingantaccen tallafi ga abubuwanku.
• Tambaya: Ana buƙatar ƙarin kayan aikin don shigarwa?
  A: Ee, za ku buƙaci rawar lantarki da guduma don nasarar shigarwa na shiryayye na tsani.

Abubuwan da aka kawo da Hardware

Ana Bukatar Kayan Aikin

Ana Bukatar Kayan Aikin (Ba'a Haɗe)

Umarnin shigarwa

Shigarwa Tukwici:
Daidaita kuma sassauta zaren duk kusoshi a cikin ramukan da suka dace kafin cikar matsawa kowane kusoshi ɗaya bayan ɗaya.

MATAKI NA 1
Amintattun sanduna [B] da [C] don hawa [G]. Sannan haɗa iyakoki na ƙarshe [I] zuwa kasan sandunan [B] da [C].

MATAKI NA 2
Amintaccen firam ɗin saman [A] zuwa sanduna [B] da [C].

MATAKI NA 3
Amintaccen allo [F], [E] da [D] zuwa firam ɗin da aka haɗa.

MATAKI NA 4
Haɗa takalmin gyaran kafa [H].

MATAKI NA 5
Amintaccen takalmin gyaran kafa [H] zuwa gefen baya na shiryayye.

MATAKI NA 6
Aminta da shiryayye zuwa bango.

Don Shigar Tushen Itace

• Sanya shimfidar tsani a matsayin da kuke so kuma ku daidaita ramin tare da layin tsakiyar ingarma. Alama ramin, da huda rami a cikin ingarman itace.
• Danne dunƙule [O] har sai an ja shi da ƙarfi a kan shiryayye.

Don Kankare, Ƙaƙƙarfan bango ko Shigar bangon Brick

• Sanya shiryayyen tsani a matsayin da kake so. Alama rami don ankaren bango [N], da huda rami.
• Yi amfani da guduma da kai don buga ankaren bango [N] cikin bango. Danne dunƙule [O] har sai an ja shi da ƙarfi a kan shiryayye.

Bayanin hulda

• (US/CA) 1-800-556-9829
• (Birtaniya) 44-808-196-3885
• support@pipishell.net
• www.pipishellav.com.

Takardu / Albarkatu

Pipishell PILS01 Ladder Shelf Littattafai 4 Tier Shelf [pdf] Jagoran Jagora PILS01 Ladder Shelf Littattafai 4 Tier Shelf Littattafai, PILS01, Takaitaccen Littattafai, Rubutun Litattafai, Rukunin Littattafai na 4 Tier Shelf.

Magana

• Manual mai amfani