QUARK-ELEC JS01, J1939 Engine Data Gateway
Bayanin samfur
Ƙayyadaddun bayanai
- Samfura: JS01
- Type: J1939 Engine Data Gateway
- Protocol Conversion: J1939 to NMEA 2000
- Daidaituwa: na'urorin Android
- Power Source: NMEA 2000 network
Umarnin Amfani da samfur
Tsari da Saita:
The JS01 is a plug-and-play device for connecting to an NMEA 2000 network. If you need to view engine data or configure multiple engines, you can use the JS01 Config App on an Android tablet or mobile device.
Sabunta Firmware:
To benefit from new features and enhanced compatibility, periodically check for firmware updates on the Quark-elec webpage. Use the JS01 Config App for easy firmware upgrades.
KARSHEVIEW
Wannan ya ƙareview only. Please familiarize yourself with the manual and the manuals of any connecting devices before installation. It is always recommended that electronic equipment be installed by an experienced installer.
SHIGA
- hawa: Consider the location…
- Dry, sturdy location.
- Tabbatar kana da daidai tsawon na USB da ake bukata. Idan hako ramuka don cabling ɗinku, rufe kowane ramuka bayan shigarwa don hana shigar ruwa da lalata jirgin ruwa ko kayan aikin ku.
- Haɗa Powerarfi
The JS01 is powered by the NMEA 2000 network. - NMEA 2000 is a plug-and-play communications standard, the JS01’s NMEA2000 input does not require additional setup before connecting it to an NMEA 2000 network. To protect the device, please don’t power up NMEA 2000 bus during the installation process.
- J1939: J1939 is a set of standards defined by the Society of Automotive Engineers (SAE). J1939 builds on the CAN bus by providing a higher-layer protocol that defines message formats, addressing, and error handling.
Different equipment may use various types of CAN bus connectors. The JS01 uses Deutsch DT04 -6P and DT06-6S connectors, which are known for their reliability and are widely used in marine inboard engines. These connectors were chosen to ensure secure, robust connections in demanding marine environments. If your engine uses a different connector type, an appropriate adapter will be required.
An haɗa masu haɗin DT04-6P da DT06-6S. Wannan ƙirar tana ba JS01 damar haɗawa cikin tsarin bas ɗin CAN da ke wanzu ba tare da tsangwama ko shafar kowane haɗin kai na yanzu ba.
Ƙungiyar JS01 tana haɗuwa ta wayoyi uku:- Fil 1: CAN .asa
- Fil 3: CAN High
- Fil 4: Kasa
Da fatan za a gwada wayoyi sau biyu don tabbatar da cewa ba a yin haɗin da ba daidai ba. JS01 yana jan wuta daga motar NMEA 2000, don haka babu buƙatar haɗa 12V.
| DT04-6P | DT06-6S | |
| Fil 1 | ZAI IYA KASA | ZAI IYA KASA |
| Fil 2 | N/A | N/A |
| Fil 3 | ZAI IYA KYAU | ZAI IYA KYAU |
| Fil 4 | GASA | GASA |
| Fil 5 | N/A | N/A |
| Fil 6 | N/A | N/A |
Hasken LED:
The LED status indicator will display a solid light when the device is powered on. It will flash to
CONVERSION LISTS
J1939 TO NMEA 2000 CONVERSION LISTS
- The JS01 operates in a read-only mode on the J1939 interface, ensuring it does not interfere with existing engine control or status systems. It only reads data from the J1939 network and transmits it to the NMEA 2000 bus. This design guarantees there are no security or safety risks to the existing J1939 system.
- The following table lists the supported NMEA 2000 PGN’s and the related J1939 SPN/PGNs.
| Source:
Saukewa: J1939SPN/PGN |
Bayani | Converted:
NMEA2000 PGN |
| 92/61443 (EEC2) | Load ɗin Injin Kashi a Gudun Yanzu | 127489 |
| 190/61444 (EEC1) | Gudun Inji | 127488 |
| 513/61444 (EEC1) | Ainihin Injin-Kashi Torque | 127489 |
| 523/61445(ETC2) | Watsawa Yanzu Gear | 127493 |
| 247/65253(HOURS) | Jimlar Sa'o'in Aikin Injiniya | 127489 |
| 110/65262 (ET1) | Injin Coolant Zazzabi | 127489 |
| 175/65262 (ET1) | Zazzabi Inji Mai | 127489 |
| 109/65263 (ET1) | Matsi mai sanyaya Injin | 127489 |
| 100/65263 (EFL_P1) | Matsin Mai Inji | 127489 |
| 94/65263 (EFL_P1) | Matsananciyar Isar da Mai | 127489/130314 |
| 183/65266 (LFE) | Yawan Man Fetur | 127489 |
| 184/65266 (LFE) | Injin Tattalin Arzikin Man Fetur | 127497 |
| 173/65270(IC1) | Injin Cire Gas Temp | 130316 |
| 102/65270(IC1) | Injin Turbocharger Boost Matsi | 127488 |
| 115/65271 (VEP1) | Alternator (Batir) Yanzu | 127508 |
| 167/65271 (VEP1) | Mai yuwuwar Alternator (Voltage) | 127489 |
| 168/65271 (VEP1) | Yiwuwar Baturi (Voltage) | 127508 |
| 127/65272(TRF1) | Yawan Man Fetur | 127493 |
| 177/65272(TRF1) | Zafin mai watsawa | 127493 |
| 96/65276 (DD) | Matsayin mai | 127505 |
APP
- The JS01 is a plug-and-play device that requires no initial configuration before connecting to an NMEA 2000 network. However, if you wish to view bayanan injin ko daidaita lambar misali don tallafawa injiniyoyi da yawa, kuna buƙatar amfani da JS01 Config App akan kwamfutar hannu ta Android ko na'urar hannu. Kayan aiki na daidaitawa kuma yana ba ku damar tace kuskuren injin da saƙonnin faɗakarwa da aka aika zuwa cibiyar sadarwar NMEA 2000.
- The latest App can be download from Quark-elec webpage page: https://www.quark-elec.com/downloads/configuration-tools/
KYAUTA FIRMWARE
- Quark-elec periodically release firmware updates to introduce new features and enhance compatibility with a wider range of engine types. The JS01 Config App can also be used to easily upgrade the device firmware. The latest firmware can be download from Quark-elec webshafi: https://www.quark-elec.com/downloads/firmware/
- Full documentation on how to update the firmware can be found in the JS01 manual: https://www.quark-elec.com/doc/JS01_manual.pdf
Rashin yarda: An ƙera wannan samfurin don taimakawa kewayawa kuma yakamata a yi amfani dashi don haɓaka hanyoyin kewayawa da ayyuka na yau da kullun. Alhakin mai amfani ne don amfani da wannan samfurin cikin hankali. Ko Quark-elec, ko masu rarraba su ko dillalan su ba sa karɓar alhakin ko alhaki ko dai ga mai amfani da samfur ko kadarorinsu don kowane haɗari, asara, rauni ko lalacewa duk abin da ya taso na amfani ko na alhaki na amfani da wannan samfur.
Duba nan don Littafin Mai Amfani na Na'urar.
- Da fatan za a sake sarrafa marufin ku
- Duk samfuran CE, RoHS bokan
- Karin bayani a www.quark-elec.com
Tambayoyin da ake yawan yi
Can the JS01 be used with multiple engines?
Yes, the JS01 supports multiple engines, and you can adjust the instance number using the JS01 Config App.
How can I update the firmware of the JS01?
Firmware updates can be easily done using the JS01 Config App. Check the Quark-elec webpage for the latest firmware download.
Is it necessary to connect a 12V power source to the JS01?
No, the JS01 draws power from the NMEA 2000 bus, so there is no need to connect a separate 12V power source.
Takardu / Albarkatu
 |
QUARK-ELEC JS01, J1939 Engine Data Gateway [pdf] Jagorar mai amfani JS01, JS01 J1939 Engine Data Gateway, JS01 J1939, Engine Data Gateway, Data Gateway, Gateway |