Abubuwan da ke ciki
boye
RAMSET TSARIN KOFAR AUTOMATIC RAMSET RAM3100DC-PE Babban Ma'aikatan Ƙofar Swinging Gate
Ƙayyadaddun bayanai
Tsaron Ƙofar Muhimman Umarnin Tsaro
Gabaɗaya Bayani:
- Rarraba Ƙofar UL: RAM 3000, RAM 3100, RAM 30-30 DC
- Haɗin Wutar Lantarki: Haɗa
- Ma'aunin Waya: Koma zuwa jagora don takamaiman buƙatu
Umarnin Amfani da samfur
Shigarwa
- Jadawalin Waya Factory: Bi tsarin da aka bayar don shigarwa daidai.
- Jagoran Saita Saurin MEP: Yi amfani da wannan jagorar don saitin Kariyar Entrapment Mai Kulawa.
- BOM (Kudirin Kayayyakin): Koma zuwa sashin Bill na Materials don sassan da ake buƙata.
Bayanan shigarwa
- RAM 3000s/ 30-30 Concrete Pad Gina: Bi takamaiman umarni don gina kushin kankare.
- Daidaita Tafiya ta Ƙofar: Daidaita yadda ake buƙata don aikin ƙofar da ya dace.
- Sakin Gaggawa: Sanin kanku da tsarin sakin gaggawa.
- Wurin Aiki/ Tsawon Hannu: Ƙayyade mafi kyawun wuri da tsayin hannu don aikin ƙofar.
- Karamin shigarwar / na al'ada: Bi jagororin don ƙarami ko shigarwa na al'ada.
Shiga & Kariyar Tsaro
- Nau'in Kariyar Shiga: Fahimta da aiwatar da nau'ikan kariyar da aka ambata a cikin littafin.
- Wiring Ido na Hoto (EMX-NIR-250-325): Haɗa wayar ido na hoto kamar yadda umarni yake.
- Yankin Kariya: Gano da kuma amintar da yankin kariyar kama kamar yadda aka bayyana.
FAQ
- Wane ma'aunin waya zan yi amfani da shi don haɗin lantarki?
- Takamaiman ma'aunin waya da ake buƙata zai dogara ne akan ɗayan abubuwan haɗin kai da saitin. Koma sashin ma'aunin waya a cikin littafin don cikakkun bayanai.
- Ta yaya zan daidaita tafiyar kofa?
- Don daidaita tafiyar ƙofa, bi umarnin da aka bayar a cikin sashin Daidaita Balaguro na Ƙofar jagorar. Yawanci ya ƙunshi yin gyare-gyare ga hanyar ƙofar.
- Menene Kariyar Entrapment Kariya (MEP)?
- MEP siffa ce ta aminci wacce ke ci gaba da sa ido kan yuwuwar yanayin kamawa da kuma haifar da matakan tsaro don hana haɗari. Koma zuwa Jagoran Saita Saurin MEP don ƙarin bayani kan saita shi.
Gargadi ƙwararren ƙwararren ƙwararren ƙwararren ƙofa KAWAI YA KAMATA YA SHIGA, KIYAYE KO HIDIMAR WANNAN KO DUK WATA MAI AIKIN ƙofa.
MUHIMMAN UMURNIN TSIRA
GARGADI - Don rage haɗarin rauni ko mutuwa:
- KARANTA KUMA KU BI DUKAN UMARNI.
- Kada a bari yara suyi aiki ko yin wasa da sarrafa ƙofa. Ka kiyaye nesa daga yara.
- Koyaushe kiyaye mutane da abubuwa daga ƙofar. BA WANDA YA KAMATA YA TSAYA TAFARKIN KOFAR MATSUWA.
- Gwada ma'aikacin ƙofar kowane wata. DOLE Ƙofar ta koma baya a tuntuɓar wani abu mai tsauri ko tsayawa lokacin da abu ya kunna na'urori masu auna firikwensin da ba su da alaƙa. Bayan daidaita ƙarfi ko iyakar tafiya, gwada ma'aikacin ƙofar. Rashin daidaitawa da sake gwada ma'aikatan ƙofa da kyau na iya ƙara haɗarin rauni ko mutuwa.
- Yi amfani da sakin gaggawa kawai lokacin da ƙofar baya motsi.
- A KIYAYE ƙofofin ƙofofin da kyau. Karanta littafin jagorar mai amfani. A sa ƙwararrun ma'aikata kawai su gyara kayan aikin ƙofar.
- Shigar na ababen hawa ne kawai. Dole ne masu tafiya a ƙasa su yi amfani da ƙofar daban.
- Ajiye waɗannan umarni.
BAYANI BAYANI
| MISALI | Saukewa: DCRAM3000 | DC RAM 3100 | DC RAM 3030 |
| MAXGATE NUNA | 2,000 lbs. | 2,500 lbs. | 3,000 lbs. |
| Tsawon Ƙofar MAX | 22' | 22' | 20' |
| SAURIN KOFAR | 90° a cikin daƙiƙa 15 (ya bambanta da hannuwa da bugun kiran sauri) | 90° a cikin daƙiƙa 15 (ya bambanta da makamai da sauri) | 90° a cikin daƙiƙa 15 (ya bambanta da hannuwa da bugun kiran sauri) |
| MOTOR | Mara goge
24VOC, 25A, 520W |
Mara goge
24VOC, 25A, 520W |
Mara goge
24VOC, 25A, 520W |
| AYYUKAN WA'AZI | CI GABA | CI GABA | CI GABA |
| ZABEN WUTA AC | 115V, 60Hz
230V, 60Hz |
115V, 60Hz
230V, 60Hz |
115V, 60Hz
230V, 60Hz |
| BATIRI | (2) 7Ah 12V baturi | (2) Batura 7Ah12V | (2) Batura 7Ah12V |
| RUFE GIRMA | 23 ″ X 18″ X 28.5″ | 23 ″ X 18″ X 28.5″ | 23.5 ″ X 17.5″ X 28.5″ |
NOTE: Duk ma'auni da iyawa a cikin wannan jagorar don daidaitaccen shigarwa ne. Duk sauran nau'ikan shigarwa na iya rage iyawa da ma'auni a cikin wannan jagorar.
Gudun ƙofa ya dogara ne akan joometry na makamai da bugun kiran sauri (duba shafi na 17).
MUHIMMAN BUKATAR TSIRA TA UL STANDARDS
- Shigar da afaretan ƙofar kawai lokacin:
- Mai aiki ya dace da ginin ƙofar da kuma ajin amfani na ƙofar,
- Duk buɗewar ƙofar zamewar a kwance suna
an kiyaye shi ko kuma an duba shi daga ƙasan ƙofar don ƙaramar 1.83 m (6 ft) sama da ƙasa don hana diamita na 57.2 mm (2-1/4 inch) wucewa ta cikin buɗewar ko'ina a cikin ƙofar, kuma a cikin wannan. sashin shingen da ke kusa da ƙofar ya rufe a cikin buɗaɗɗen matsayi, - Duk wuraren madaidaicin madaidaicin ƙofa mai motsi daga ƙasan ƙofar zuwa saman ƙofar ko mafi ƙarancin 1.83 m (72 in) sama da maki, duk wanda ya yi ƙasa da shi, wanda ke wucewa ta wani tsayayyen abu, kuma a cikin yankin. na shingen da ke kusa da ƙofar ya rufe yayin tafiya na ƙofar, za a tsara shi, kiyaye shi ko a duba shi don hana diamita na 57 mm (2-1/4 in) daga wucewa ta irin wadannan wurare.
- An kawar da duk wuraren da aka fallasa su ko an kiyaye su, kuma
- Ana ba da kariya ga abin nadi da aka fallasa.
- Umarnin mai aiki zai lissafa matsakaicin adadin buɗaɗɗe da na'urorin kariya na tarko waɗanda za a iya haɗa su da afareta.
- An yi nufin ma'aikacin don shigarwa kawai akan ƙofofin da ake amfani da su don ababen hawa. Dole ne a ba wa masu tafiya tafiya tare da buɗe hanyar shiga daban. Dole ne a tsara buɗe hanyar shiga masu tafiya don haɓaka amfani da masu tafiya. Nemo ƙofar da mutane ba za su haɗu da ƙofar motar ba yayin duk hanyar tafiya ta ƙofar motar.
- Dole ne a shigar da ƙofar a wani wuri don a ba da isasshen izini tsakanin ƙofar da tsarin da ke kusa lokacin buɗewa da rufewa don rage haɗarin tarko. Kada a buɗe ƙofofin lilo zuwa wuraren shiga jama'a.
- Dole ne a shigar da ƙofar da kyau kuma a yi aiki da yardar kaina a cikin sassan biyu kafin shigar da ma'aikacin ƙofar. Kar a yi wa mai aiki da ƙarfi fiye da kima ko bawul ɗin taimako na matsa lamba don rama shigar da ba daidai ba, aiki mara kyau, ko kofa da ta lalace.
- Ga masu aikin ƙofa suna amfani da kariya ta nau'in D:
- Dole ne a sanya ikon sarrafa ƙofa domin mai amfani ya cika view na unguwar gate a lokacin da gate yake motsi.
- Katin kamar yadda ake buƙata ta 62.1.6 za a sanya shi kusa da abubuwan sarrafawa,
- Ba za a yi amfani da na'urar rufewa ta atomatik (kamar mai ƙidayar lokaci, firikwensin madauki, ko makamancin na'urar) ba, kuma
- Babu wata na'urar kunnawa da za a haɗa.
- Abubuwan sarrafawa na dindindin waɗanda aka yi niyya don kunna mai amfani dole ne su kasance aƙalla 1.83 m (6ft) nesa da kowane ɓangaren motsi na ƙofar kuma inda aka hana mai amfani isa kan, ƙarƙashin, kewaye ko ta ƙofar don sarrafa abubuwan sarrafawa.
- Banda: Ana iya sanya ikon sarrafa damar gaggawa ta ma'aikata masu izini kawai (misali 'yan sandan kashe gobara, EMS) a kowane wuri a cikin 1 rashin gani na ƙofar.
- Maɓallin Tsayawa da/ko Sake saitin dole ne ya kasance a cikin layin-na-ganin ƙofar. Kunna ikon sake saiti bazai sa mai aiki ya fara ba.
- Aƙalla ALAMOMIN GARGADI guda biyu (2) za a shigar, a yankin ƙofar. Mutane da ke gefen ƙofar da aka sanya allunan za su iya ganin kowane kwali. Duba kuma duba 62.1.1.
- Don masu aikin kofa suna amfani da firikwensin mara lamba daidai da 32.1.1:
- Duba umarnin kan sanya na'urori masu auna firikwensin da ba na lamba ba don kowane nau'in aikace-aikacen,
- Dole ne a yi taka-tsantsan don rage haɗarin haɗari, kamar lokacin da abin hawa, ya zagaya firikwensin yayin da ƙofar ke tafiya, da
- Za a kasance ɗaya ko fiye da na'urori masu auna firikwensin da ba su tuntuɓar juna a inda haɗarin kama ko toshewa ya kasance, kamar kewayen da wata kofa mai motsi ko shamaki za ta iya kaiwa.
- Don ma'aikacin ƙofa yana amfani da firikwensin lamba daidai da 32.1.1:
- Za a kasance ɗaya ko fiye da na'urori masu auna firikwensin tuntuɓar juna inda haɗarin kamawa ko toshewa ya kasance, kamar a gefen jagora, gefen sawu, da kuma liƙa duka a ciki da wajen ƙofar zamewar abin hawa.
- Za a kasance ɗaya ko fiye da na'urori masu auna firikwensin lamba a gefen ƙasa na ƙofar ɗagawa a tsaye.
- Za a kasance ɗaya ko fiye da na'urori masu auna firikwensin tuntuɓar su a wurin tsunkule na ƙofar madaidaicin abin hawa.
- Za a sami na'urar firikwensin tuntuɓar ma'auni kuma a shirya wayoyi ta yadda sadarwa tsakanin firikwensin da ma'aikacin ƙofa ba ta fuskantar lalacewa na inji.
- Na'urar mara waya kamar wacce ke watsa sigina na mitar rediyo (RF) zuwa ga ma'aikacin ƙofa don ayyukan kariya na tarko za a kasance a wurin da watsa siginar ba ta cika ko cikas ba ta hanyar gine-gine, shimfidar ƙasa ko makamancin haka. Na'urar mara waya za ta yi aiki a ƙarƙashin yanayin amfani da ƙarshen da aka nufa.
- Za a kasance ɗaya ko fiye da na'urori masu auna firikwensin lamba a ciki da wajen gaban gaban kofa mai lilo. Bugu da ƙari, idan gefen ƙofar kasan ya fi 152 mm (6 in) amma ƙasa da 406 mm (16 1n) sama da ƙasa a kowane wuri a cikin baka na tafiya, ɗaya ko fiye da na'urori masu auna firikwensin za su kasance a kan gefen kasa.
- Za a kasance ɗaya ko fiye da na'urori masu auna firikwensin lamba a gefen ƙasa na shingen tsaye (hannu)
HAKKOKIN MAI TSIRA/ TECHNICIAN GATE
WANDA ƙwararren ƙwararren ƙwararren ƙwararren ƙofa ne ya kamata a shigar da ma'aikatan Ƙofar RAMSET KAWAI, YA KAMATA KO AYI HIDIMAR.
- KARANTA KUMA KA FAHIMCI DUKKAN MANZON ALLAH KAFIN FARA KOWANE SHIGA.
- YI AMFANI DA MAI AIKATA MAI GIRMA. LA'akari:
- CATEGORY (Sanya, Swing ko Sama)
- NAU'I (STANDARD, UPHILL, COMPACT,… da sauransu)
- Duk ma'auni da iyawa a cikin wannan jagorar don daidaitaccen shigarwa ne. Duk sauran nau'ikan shigarwa na iya rage iyawa da ma'auni a cikin wannan jagorar.
- GATE CLASS (I, II, Ill or IV) duba sashin rarraba ƙofar UL
- NUNA KOFAR & TAFIYA
- KAR KU WUCE KAYAN KYAUTA DA KYAUTA NA operator da HARDWARE.
- TABBATAR DA MAI AIKATA YANA DA TASIRI MAI TSARKI (duba sashin bayanan shigarwa)
- LOKACIN HIDIMAR DA AKE YIWA MAI GIDAN ƙofa A Koyaushe YA YI KALLON GABA DAYA TSARIN (GATE, GATE PERATOR, INSTALLATION & ELECTRICAL/WIRING) DA KUMA BAYAR DA KOWANE SHAWARA GA MAI DUKIYA, DOMIN KAWO CIGABA DA KULLA. 325 DA ASTM F2200 STANDARAR TSIRA.
- RAUNIYA MAI HANNU BA ZAI CUTAR DA HUKUNCIN MAI SHIGA / TECHNICIA BA SABODA GASKIYA BABU WATA ABUBUWAN DA SUKE SHARI’AR DA AKE CUTAR DA JAM’IYYAR RAUNIYA WANDA BAI SANYA RAUNI BA.
- LOKACIN DA AKE WAJIBI, SHIGA SURGE / WUTA HANNU DA SANDON GASA.
- TSIRA SHINE MATSALAR FARKO A LOKACIN DA AKE SHIGA MA'AIKATAR KOFAR
- TABBATAR BIN DUKKAN UL 325 DA ASTM F2200 CODEES SAFIYA.
- DUK WATA KOFAR DA BA A AUTAR BA WANDA AKE INGANTAWA DOMIN CIKAWA DA DUKKAN MA'AURATA ASTM F2200.
- A LOKACIN DA MAI AIKIN GATE KE BUKATAR MASA, ZA'A KARA KYAUTA KOFAR DA TAKE DOMIN CIN KAI GA DUKKAN ASTM F2200 DA UL325 SAFETY STANDARDS.
- LOKACIN DA KOFAR TSARIN KOFAR ARZIKI YANA BUKATAR MASA, SABON KOFAR ZATA CIKA DA DUKKAN ASTM F2200 STANDARDS.
- KAWAI AMFANI DA UL 325 KYAUTA KYAUTA & KAYANA.
- KAWAI AYI AMFANI DA INGANTATTU NA NA'URAR KARE HANNU DA AKA JERA A CIKIN WANNAN MANHAJAR.
- TABBATA DUK YANZU YANZU ANA KARE TA HANYAR NA'URURAR KIYAYEWA.
- SHINGAN SHIGA: Wurare tsakanin kofa mai motsi da gefen gaba ko saman inda za a iya kamawa har zuwa ƙafa 6. sama da daraja. Irin waɗannan wuraren suna faruwa ne idan a duk lokacin tafiya tazarar dake tsakanin kofa mai motsi da ƙayyadadden gefuna ko filaye masu gaba da juna bai wuce inci 16 ba.
- ARZIKI NA'urorin TSARE HANNU:
- EMX NIR 50-325
- EMX IRB-RET
- EMX IRB-MON
- Bayani na OMRON E3K-R1 0K4
- Saukewa: SECO-LARM E931-S50RRGQ
- Saukewa: SECO-LARM E936-S45RRGQ
- Miller EDGE - PRIM GUARD
- Miller EDGE - NUNA! GARGADI
- BABU NA'URAR AMFANI DA AKE WUCE, CIRE KO INGANTAWA DA MAI SANYA.
- DOLE DOLE DOLE A KUSA DUK SARAUTA A KASA KASA FEUT 6 DAGA KOWANE SASHE NA MAI AIKI NA ƙofa ko Ƙofar Motsawa a koda yaushe.
- YA KAMATA ANA SHIGA TSORON INJI DOMIN MAI AMFANI YA SAMU LAYIN KIYAYYA GA YANKIN GARGAJIYA.
- YA KAMATA A SHIGA IDON HOTO A CIKIN INCI 5 DAGA FARNIN ƙofa DA MATSALAR TSAYI INCI 27.5.
- DUK WADANDA SUKA BAYYANA MATSALAR KWANKWASO ANA KASHE KO KARE.
- DUK WADANDA SUKA BAYYANA ANA KARE.
- DOLE DOLE ALAMOMIN GARGADI A KAN HAR ABADA HAR YANZU A BANGAREN KOFAR A WANI WURI MAI KYAU WANDA AKE SAUQAR GANI DAGA FUSKA BIYU NA KOFAR.
- DOMIN HANYAR HANYAR TSAFIYA A MAGANGANYAR KOFAR MOTA MAI AUTOCI, SAI A SAMAR DA KOFAR MAI TAFIYA.
- ZA'A SHIGA KOFAR TAFIYA A WANI WURI DOMIN MASU TAFIYA BA ZAI SHIGO DA KOFAR MOTA BA.
- BA ZA A HADA KOFAR TSAFIYA A CIKIN FALALAN KOFAR MOTA BA.
- ZA'A TSAYA A TSIRA, GINA KOFOFOFI, DA SHIGA DOMIN KADA RUWAN RUWAN SU YA FARUWA IDAN AKA KASHE MAI AIKATA AUTOMATIC.
DUK BUDE BUDE ZA'A TSAYA, A TSARE KO A HANNU DAGA KASASHEN KOFAR ZUWA WURIN KOFAR KO MARAMAN 72 ″ Sama da Daraja, DUK WANDA BAI KARANCIN BA, DOMIN HANA 2 ¼” DIAMETER SPHER HANGAR WUTA. THE Ƙofar, DA A WANAN RABO NA BANGAREN BANGAREN BANGAREN DA ƘOFAR KE NUFE A CIKIN BUDADDIYAR MATSAYI. BANGAREN Ƙofar ZAI HADA DUK BANGAREN KOFAR MULKI, HARDA DUK WANI BANGAREN BAYA KO BANZA AKAN KASHI NA ƙofa.
MUHIMMAN BAYANI GA MAI GIDA
BAYANIN GARANTI
- Cika gabaɗaya kuma aika wasiku (Ta hanyar wasiƙar da aka ba da izini) KATIN RUJIN WARRANTY ɗin ku a cikin kwanaki 90 na shigarwa zuwa:
- Ramset Automatic Gate Systems, Inc. girma
- 9116 De Garmo Ave
- Sun Valley, CA 91352
- Hakanan za'a iya cika KAtin RIGISTRATION WARRANTY akan mu websiteRAMSETINC.COM>.
- Karanta kuma ku fahimci takaddun garantin ku.
- Garanti na Ramset yana rufe ma'aikaci kawai akan lahanin masana'anta.
- Tambayi mai sakawa/masanin fasaha menene garanti akan sabis ɗin su. (Ba a rufe aikin a ƙarƙashin garantin Ramset).
- Duk batutuwan Garanti & da'awar dole ne a fanshi su ta hanyar injiniyan ƙofa.
KAFIN MASANIN KU YA BAR:
- Tambayi ma'aikacin ku game da duk fasalulluka na sabon Ma'aikacin Ƙofar Ramset.
- Tabbatar cewa ƙofar tana tafiya a hankali ba tare da girgizawa da yawa ba, birgima ko hayaniya.
- Tabbatar cewa duk na'urorin haɗi suna aiki da kyau (maɓalli, faifan maɓalli, tsarin shigar waya, madaukai na fita, madaukai masu aminci, madaukai na fatalwa, firikwensin gefen ... da sauransu).
- Tabbatar cewa ma'aikacin ku ya ba ku waɗannan takaddun da ke kewaye a cikin kowane ma'aikaci:
- Katin Rijistar Garanti
- Takaddun garanti
- Takardar dubawa
- Ka sa ma'aikacin ku ya ba ku nunin yadda ake amfani da sakin gaggawa:
- Ƙafafun ƙafa
- Sarkar Drop
- Sakin ledar hannu
- Sakin trolley ɗin hannu
- Ka sa mai fasaha ya nuna maka mai fasa ƙofa a cikin sashin wutar lantarki naka.
- Ana ba da lakabi tare da kowane ma'aikaci don yiwa mai karya alama a sarari.
- Tabbatar an shigar da idanun hoto ko gefuna da kyau a tsarin ƙofar ku.
- Aƙalla 1 Hoto ido/baki mai kare hanyar rufewa.
- WANNAN SHIGA NA MOTOCI NE KAWAI. Masu tafiya a ƙasa yakamata a ba su wata hanyar shiga ta daban.
- Ya kamata a kasance a wurin ƙofar masu tafiya don kada ƙofar shiga motar da ke motsi kada ta haye ko kuma ta haɗu da ƙofar masu tafiya a kowane lokaci.
- Ba za a shigar da ƙofar masu tafiya a cikin rukunin ƙofar abin hawa mai sarrafa kansa ba.
- Dole ne a sanya alamun faɗakarwa a kowane gefen ƙofar (ciki da waje) a wani wuri da ake iya gani sosai.
BAYAN JAGORAN KU
- Koyaushe kiyaye kyakkyawar alaƙa da ma'aikacin ku kuma kiyaye lambar wayar su da amfani don kulawa ko gaggawa na gaba.
- Duk batutuwa yakamata a kai su ga ma'aikacin ku.
- A duk lokacin da zai yiwu, kashe mai watsewar kewayawa zuwa afareta kafin amfani da tsarin sakin gaggawa.
- Babu wanda sai ƙwararren ƙwararren ƙwararren ƙofa da ya isa ya cire murfin ko ƙofar shiga daga ma'aikacin ƙofar.
- ƙwararren ƙwararren ƙofa ne kawai ya kamata yayi aiki akan, kulawa, tsaftacewa, gyarawa ko yiwa ma'aikacin ƙofar hidima.
- A kiyaye ƙofofin da kyau. Kasance da ƙwararren ƙwararren ƙwararren ƙofa na tsarin ma'aikatan ƙofa & kayan aikin kofa kusan kowane watanni 6 zuwa shekara.
- akai-akai duba duk na'urorin aminci don aiki da ya dace. Wannan ya haɗa da idanun hoto, madaukai, gefuna… da sauransu.
- akai-akai duba sakin gaggawar ku da tsarin ajiyar baturi (idan an zartar) don aiki mai kyau.
- Kada a bari yara suyi aiki ko yin wasa da sarrafa ƙofa. Ka kiyaye abubuwan sarrafawa daga yara.
- Kada ka bari yara suyi wasa a yankin da ke kusa da ƙofar ko ma'aikacin ƙofa.
- Kada kowa ya hau, ya hau ƙasa ko ya hau bisa ƙofar.
- Koyaushe kiyaye mutane, yara da abubuwa daga ƙofar yayin da ƙofar ke aiki.
- Kada wanda ya isa ya ketare yankin kofa mai motsi.
- Tsaftace yankin da ke kusa da ma'aikacin ƙofa kuma babu tarkace.
- Ka kiyaye yankin da ke kusa da ma'aikacin ƙofa daga kwari da rodents. Kwari da rodents na iya haifar da lalacewa ga ma'aikacin ƙofa, wanda garanti ba ya rufe.
Bayanin UL GATE
- CLASS I – Mai gudanar da Ƙofar Mota ta wurin zama – Ma’aikacin ƙofar mota (ko tsarin) wanda aka yi nufin amfani da shi a cikin gareji ko wuraren ajiye motoci masu alaƙa da wurin zama na iyalai ɗaya zuwa huɗu.
- CLASS ll – Kasuwanci / Gabaɗaya. Samun Ma'aikacin Ƙofar Mota -Ma'aikacin ƙofar mota (ko tsarin) wanda aka yi nufin amfani dashi a wurin kasuwanci ko gini kamar rukunin gidaje na iyali da yawa (raka'a biyar ko fiye ɗaya), otal, gareji, kantin sayar da kayayyaki, ko wasu gine-ginen da za a iya samu ta hanyar. ko yiwa jama'a hidima.
- CLASS 111-Ma'aikacin Ƙofar Mota na Masana'antu / Iyakaitacce -Ma'aikacin ƙofar mota (ko tsarin) wanda aka yi niyya don amfani da shi a wurin masana'antu ko gini kamar masana'anta ko wurin saukar da kaya ko wani wurin da ba'a samu ta ko nufin yi wa jama'a hidima.
- CLASS IV – Ƙofar Ƙofar Mota ta Ƙuntata - Ma'aikacin ƙofar mota (ko tsarin) wanda aka yi nufin amfani da shi a wurin masana'antu da aka tsare ko gini kamar yankin tsaro na filin jirgin sama ko wasu wuraren da ba a ba da damar jama'a ba, wanda aka hana shiga mara izini. ta hanyar sa ido daga jami'an tsaro.
SHAWARAR HADA LANTARKI
3-waya, 115VAC lantarki da'ira tare da 15 amp Mai zaman kanta ( sadaukarwa) mai keɓewar kewayawa don mai aiki ɗaya da 20 amp mai zaman kanta ( sadaukarwa) mai watsewar kewayawa don tsarin firamare na farko. Low voltage dole ne a gudanar da wayoyi masu sarrafawa a cikin keɓantaccen magudanar ruwa zuwa mai aiki.
NOTE: Koyaushe tuntuɓar kuma ku bi DUK GININ GINDI DA LANTARKI KAFIN SANYA. DOMIN YI AMFANI DA WAYAR DOMIN DOMIN KAMAR YADDA AKE BUKATA TA KARAMAR LAMUD. GAME DA
MAI AIKATA YANA DA MUHIMMAN DOMIN SAFET Y DA AIKI MAI DACE.
SHAWARAR WIRE GAUGE
| MISALI VOLTS | Ina gudu 12GA (AC) | Ina 10GA | Ina 8GA | Ina 6GA | ||
| DC3000 | 115 | 3.5 A | har zuwa 300' | 301-400' | 401-600' | 601-1000' |
| DC3100 | 115 | 5,4 A | har zuwa 150' | 151-250' | 251-400' | 401-700' |
| DC3030 | 115 | 5.4 A | har zuwa 150' | 151-250' | 251-400' | 401-7001 |
I! HANKALI I!! Lambobin da aka wakilta akan wannan ginshiƙi shawarwari ne. Koyaushe. tuntuɓi lambobin lantarki na gida kafin zaɓar ma'aunin waya don amfani.
SHIGA BAYANIN KYAUTA - KASHIN KASHE
GARGADI
Koyaushe tuntuɓar kuma ku bi DUK GININ GINDI DA LANTARKI KAFIN SANYA.
GININ KWANA MAI KWANA
Matsakaicin da aka bayar don kushin sun dogara ne akan juzu'in ƙasa na PSF 2000 Waɗannan alkalumman ƙila a daidaita su dangane da yanayin ƙasa na gida.
- Gina fom don hawa kushin bisa ga girman da aka nuna a Hoto 1, 2 & 3.
- Nemo kushin hawa gwargwadon girman da aka bayar a cikin kwatanci.
- Matakin saman gefen sigar.
- Saita sanduna masu ƙarfafawa da ragar waya.
- Mix kankare, zuba cakuda cikin tsari. Level da ƙare saman bayan an gama zubawa.
- Bada kushin ya warke na tsawon awanni 48, kuma cire fom ɗin.
| MISALI | A | B | C | D | E | F |
| DC R3000 | 26" | 20" | 14" | 13 1/2" | 6" | 21/2" |
| DC R3030 | 26” | 20" | 13" | 13 112" | 6” | 21/2" |
FOOTPRINTS 
GYARAN TAFIYA
SAKI NA GAGGAWA & TSORON TORQUE LTD
WURI MAI AIKATA & TSAYIN HANNU
GARGADI A TABBATAR BABU BUDE KYAUTA A LOKACIN DA HANNU SUKE CIKI.
AYI AMFANI DA TSAGAN TSARKI A BACETIN KOFAR DA KURFAR DUNIYA DOMIN GYARA HANNU DOMIN DOMIN TSAYIN DA YA dace kafin a yi musu walda.
KYAUTA & KYAUTA KYAUTA
- Sami ma'aunin tef.
- Rufe gate din gaba daya.
- Auna nisa daga cibiyar pivot zuwa bakin bakin ƙofar. Za mu kira wannan ma'aunin 'X'.
- Bude da tsare kofar.
- Lanƙwasa ma'aunin tef (duba Hoto 11) don ƙirƙirar ma'auni.
- Sanya ƙarshen ma'aunin tef (O") akan kullin bakin ƙofar.
- Sanya ma'aunin 'X' (daga mataki na 3) na ma'aunin tef zuwa cibiyar pivot.
- Matsar da pivot ma'aunin tef har sai ya kasance kamar inci 3 daga toshewar (bangon).
- 'H' shine tsayin guntun hannu.
- 'J' shine tsayin dogon hannu.
LOOP WURI & SHIGA
GARGADI BA ZA A YI AMFANI DA SANARWA NA MAƊAKI BA DOMIN SAMUN BUKATUN UL326. ANA BUKATAR IDON HOTO, GEFE KO MASU DAIDAI DOMIN SAMUN BUKATUN UL326.
- MANUFOFIN JIYAWA: Riƙe ƙofar a buɗe ko juya ƙofar rufe idan an gano abin hawa.
- MAƊAUKAKI: An sanya shi a ƙarƙashin hanyar murɗawa ta kofa mai lilo. Wannan madauki zai duba kafin ƙofar ya rufe don ganin ko abin hawa yana cikin hanyar juyawa, idan abin hawa yana cikin hanyar juyawa ƙofar ba za ta motsa ba.
- MAƊAUKAKIN CIKI: An ajiye shi a waje da hanyar ƙofa. Yana tsayar da gate din yana budewa har sai an share.
- FITAR DA MAƊAKI: Yana buɗewa ya riƙe ƙofar a buɗe.
KOFOFOFIN RUSA DUAL - PRIMARY & SECONDARY
- Haɗa wayoyi 3, kebul mai kariya (ba a kawota ba), tsakanin 'SEC XCOM' akan allon tunani a rukunin farko da 'XCOM' akan allon direban AC a rukunin sakandare.
- Ya kamata a gudanar da wayoyi na farko/na biyu a cikin magudanar ruwa daban da wutar lantarki.
*MUHIMMI*
Lokacin haɗa igiyoyi na farko/na biyu, duka masu aiki dole ne a kashe su. Da zarar an haɗa igiyoyin, za a iya sake kunna wutar lantarki.
NAU'O'IN ARKO & MANANAN TSARI
GARGADI DUK YANAR DA AKE NUFI ANA BUKATAR KARIYA BV NA'URAR KARE HANYA.
- Kowane ma'aikacin ƙofar lilo yana buƙatar mafi ƙarancin:
- na'urar kariya ta tarko a cikin hanyar buɗewa, da
- na'urorin kariya na tarko a cikin hanyar rufewa.
- Ɗaya daga cikin kowane shugabanci yana rufe ta tsarin ERO na ainihi (Nau'in A).
Don haka, aƙalla ƙarin ƙarin idon hoto, firikwensin gefen ko makamancinsa ana buƙatar ƙarawa, ta mai sakawa, a cikin hanyar rufewa. - Tun da kowane shigarwa ya bambanta, ya kai ga ƙwararren ƙwararren ƙwararren masani don tabbatar da cewa DUK wuraren tarko suna da kariya ta na'urar kariya ta tarko.
- Har ila yau, ya rage ga ƙwararren ƙwararren ƙwararren masani don sanin nau'ikan nau'ikan da na'urori nawa ake buƙata.
- Matsakaicin na'urori 10 masu kamawa ana iya haɗa su zuwa afaretan ku, ya danganta da hanyar tafiya da nau'in na'urar.
Nau'in kariyar Entrapment Horizontal Swing A, 81, 82, C ko D
Lura – Ba za a yi amfani da nau'in nau'in na'ura ɗaya ba don hanyoyin kariya ta tarko.
| Nau'in A | Tsarin kariyar tarko na asali. |
| Nau'in B1 | Na'urar firikwensin mara lamba ( firikwensin hoto ko makamancinsa). |
| Nau'in B2 | Tuntuɓi firikwensin (na'urar gefen ko makamancin haka). |
| Nau'inC | Ƙayyadaddun ƙarfi na asali, daidaitaccen kama ko na'urar taimakon matsa lamba. |
| Nau'in D | Na'urar kunnawa tana buƙatar ci gaba da matsa lamba don kiyaye motsin buɗe ko rufewa. |
| Mafi ƙarancin Ma'anar Kariyar Shiga | ||
| Budewa | Rufewa | |
| Ƙofar Swing a kwance | 1* | 2* |
*Tsarin ERO Inherent (Nau'in A) yana ƙidaya azaman na'urar kariya ta tarko 1 a kowace hanya. Don haka, ana buƙatar shigar da ƙaramar na'urar kariya ta waje guda ɗaya (nau'in 81 ko 82) a wurin rufewa.
EMX - NIR-50-325 - Hotunan KYAUTA HOTO 
YANKIN TSARI
GARGADI TABBATA DUK YANZU YANZU ANA KARE TA HANYAR NA'URURAR KIYAYEWA.
YANAR HANYA: Wurare tsakanin kofa mai motsi da gefen gaba ko saman inda za a iya kamawa har zuwa 6ft sama da maki. Irin waɗannan wuraren suna faruwa idan a kowane lokaci na tafiya tazarar da ke tsakanin ƙofa mai motsi da ƙayyadadden gefuna masu adawa ko saman bai wuce inci 16 ba.
Don hana mummunan rauni? cutarwar jiki ko mutuwa daga kofa mai motsi:
Dole ne a shigar da na'urorin kariya na tarko don rufe duk wuraren da ke da haɗari a cikin tarko da wuraren da za a buɗe kofofin rufewa.
Tunda kowane shigarwa (na daban ne, idan ya kai ga ƙwararren ƙwararren ƙwararren ƙwararren masani don tantancewa:
- Duk wuraren da za a iya shiga ciki & wurare
- Adadi da nau'in na'urorin kariya na tarko waɗanda ake buƙata.
Amintattun na'urorin hana kama-karya {10K hanya):
- EMX NIR 50-325
- EMX IRB-MON
- EMX IRB-RET
- OMRON - E35-R1 0K4
- Miller EDGE - PRIM GUARD
- MILLER EDGE - MAI GIRMA
- SECO-LARM - "Mai tilastawa" - E931-S50RRGQ
- SECO-LARM - "Mai tilastawa" - E936-S45RRGQ
- YANKIN POST MAI KYAU - KYAUTA
- KISHI MAI JAGORANCI – HANYA
- BAYAN HANYA
- KASASHEN ƘOFAR KASA - HANYA
- BACK PLANEZONE-HANYA
- YANAR GIDA - TSIRA
- ZUWA WAJE - TSIRA
LOGIC & DC DRIVER BOARD - LAYOUT LED
HUKUNCIN MASANA 
- WUTA – Low voltage yana nan.
- BUDEWA – Ƙofar tana buɗewa.
- AN TSAYA – An tsayar da ƙofar.
- RUFE – Ƙofar tana rufe.
- CIKAKKEN BUDE - Ana kunna maɓalli na buɗe iyaka.
- CIKAKKEN RUFE - Ana kunna madaidaicin iyakar kusanci.
- 3BTN BUDE – 3-button tashar “bude” button ana danna.
- 3BTN TSAYA – Ana danna maɓallin “tasha” tashar 3-button.
- 3BTN CLOSE – 3-button tashar “kusa” button ana danna.
- PR/CO GARGADI – Pre-warn/Constant-warn relay yana aiki.
- TSIRA – Safety I Reversing na'urar ana kunna.
- GASKIYA – Ana kunna na'urar Firebox.
- fita – Ana kunna na'urar fita.
- PHANTOM - Ana kunna na'urar fatalwa.
- RADIO – Ana kunna na’urar rediyo
- MAG/SOL – Magnetic I solenoid kulle gudun ba da sanda yana aiki.
- INS DET - Ana kunna na'urar ganowa a ciki.
- LED 1- Ba a yi amfani da shi ba a wannan lokacin.
- LED 2- Ba a yi amfani da shi ba a wannan lokacin.
- LED 3- Ba a yi amfani da shi ba a wannan lokacin.
- PRI ERO - ERO akan rukunin farko ana kunna shi.
- PRI XCOM – Sadarwa akan rukunin farko shine aika Ina karɓar bayanai.
- SEC ERO – ERO a kan naúrar na biyu ana haifar da shi.
- SEC XCOM – Sadarwa akan sashin sakandare yana aika Ina karɓar sigina
- Farashin SEC FP – Ana kunna bugun ƙafar ƙafa a sashin na biyu.
- SHIGA 1 - Ana kunna na'urar da aka saka a cikin Entrapment #1.
- SHIGA 2 - Ana kunna na'urar da aka saka a cikin Entrapment #2.
- SHIGA 3 - Ana kunna na'urar da aka saka a cikin Entrapment #3.
- SHIGA 4 - Ana kunna na'urar da aka saka a cikin Entrapment #4.
- SHIGA 5 - Ana kunna na'urar da aka saka a cikin Entrapment #5.
DC DRIVER BOARD
- AC WUTA – Low voltage yana nan.
- MOTOR 1 - Motoci 1 suna gudana.
- MOTOR 2 - Motoci 2 suna gudana.
- AN TSAYA – An tsayar da Ƙofar.
- XCOM – Sadarwa tana aikawa ina karɓar bayanai.
- KYAU – Ana kunna shigar da maɓalli.
- AUX 1-1st shigarwar taimako.
- LED 1- Ba a yi amfani da shi ba a wannan lokacin.
- ERO - Ana kunna ERO.
- KWALLON KAFA – Ana kunna bugun ƙafar ƙafa.
- Iyakan 1 - Ana kunna iyakance iyaka 1.
- Iyakan 2 - Ana kunna iyakance iyaka 2.
- SAUKI/INIT – Ana fara farawa a hankali & tasha a hankali.
- CIGABA - Ana cajin baturi.
- BATT PWR – Matsayin ƙarfin baturi.
- LED 2- Ba a yi amfani da shi ba a wannan lokacin.
LOGIC BOARD DIP SWITCHES & PUSHBUTTONS
DIP SWITCH 'A'
'A'I, 2 & 3 - AUTOMATIC CLOSE TIMER
0 = * KASA = KYAUTA
LOKACIN BUDE KOFAR 1 2 3
| 0 | 0 | 0 | RASHIN LAFIYA | |||
| 0 | 0 | 0 seconds | ||||
| 0 | 0 | 5 seconds | ||||
| 0 | 1 | 1 | 10 seconds | |||
| 1 | 0 | 0 | 15 seconds | |||
| 1 | 0 | 1 | 30 seconds | |||
| 0 | 45 seconds | |||||
| 60 seconds | ||||||
'A' 4 - GARGAƊAN GARGADI
| KASA | Aiki na al'ada |
| UP | Yana haifar da rufaffiyar lamba tsakanin 'CON/PRE GARGADI' abubuwan da aka fitar (wanda ke kan toshe haɗin haɗin kai) na tsawon daƙiƙa 3 kafin ƙofar ta motsa A kowace hanya. |
'A' 5 - GARGAƊAN GARGADI
| KASA | Aiki na al'ada |
| UP | Yana haifar da rufaffiyar lamba tsakanin 'CON/PRE
GARGADI' abubuwan da aka fitar (wanda ke kan hanyoyin sadarwa toshe) duk lokacin da motar ke gudana. |
Idan duka 'A' 4 & 'A' 5 suna cikin matsayi na sama to za'a sami rufaffiyar lamba akan abubuwan da aka fitar na con/prewarn na daƙiƙa 3 kafin kuma yayin da motar ke gudana.
'A' 6 -AMINCI RUFE
| KASA | Aiki na al'ada |
| UP | Lokacin da wutar lantarki ta ɓace sannan aka dawo, idan duk na'urori sun bayyana & yana da aminci, ƙofar za ta rufe |
'A' 7 - WUTA DAYA
| KASA | Aiki na al'ada |
| UP | Yayin da ƙofar ke buɗewa, idan an kunna rev loop Input sannan kuma a share, nan take ƙofar za ta fara rufewa. Idan an sake kunna madauki na rev, kafin a rufe ƙofar gabaɗaya, ƙofar za ta tsaya ta tsaya a huta har sai an share shigar da madauki. Da zarar an share shigar da rev loop, ƙofar za ta ci gaba da rufewa. A kowane
lokaci idan an karɓi sigina mai inganci, ƙofar za ta buɗe. |
'A' 8 - ZAGIN RADIO
| KASA | Ƙofar za ta rufe, idan yana kan iyaka a buɗe. In ba haka ba, ƙofar za ta buɗe. |
| UP | Ƙofar za ta rufe idan tana kan iyaka a buɗe. Ƙofar za ta buɗe idan tana kan iyaka. Idan a cikin tafiya, ƙofar zai tsaya tare da umarni na 1 kuma ya juya tare da umarni na biyu. |
DIP SWITCH 'B'
'B' 1 - FULL REVERSE ERD
| KASA | Aiki na al'ada. Idan an hangi toshewa, kofa so tsaya ka juyo na dakika 1. |
| up | If ana jin wani toshewa:
Buɗewa - Ƙofar za ta tsaya kuma ta juya zuwa 1 sec. Rufewa - Ƙofar za ta tsaya kuma tana juyawa har sai an buɗe cikakke. |
'B' 2 -MAGNETIC/ SOLENOID LOCK
| KASA | Kulle Magnetic • Ana gajarta gudun ba da sandar MAG/SOL lokacin da ƙofar ke rufe ko rufe. |
| UP | Solenoid Lock - MAG/SOL ana gajarta na tsawon daƙiƙa 2 lokacin da ƙofar ta fara buɗewa. |
'B' 3 zuwa 8 - BA A AMFANI DA WANNAN LOKACIN
DIP SWITCH 'C'
'C' 1-3B TSAYA
| KASA 3-button tashar- Shigar da 'STOP' yana aiki. A | |
| Dole ne canjin lamba-rufe-rufe ya kasance tsakanin 'na kowa' da 'tsayawa' | |
| UP | 3-button station- An ketare shigarwar 'STOP'. Babu wata alaƙa tsakanin 'na kowa' da 'tsayawa' da ake buƙata. |
'C' 2 - NAU'IN D**
| KASA | Nau'in D • ba a amfani dashi don saduwa da ma'aunin UL325. |
| UP | Nau'in D • Ana amfani dashi don saduwa da ma'aunin UL325. Wannan yana kashe duk abubuwan da aka shigar banda tashar maɓalli 3. Ana buƙatar sigina mai kiyayewa. |
Nau'in D na'urar -Maɓallin turawa ko daidai wanda ke buƙatar kiyaye matsa lamba don kunnawa.
Ga ma'aikatan gale suna amfani da kariya ta nau'in D:
- Dole ne a sanya ikon sarrafa ƙofa domin mai amfani ya sami cikakken view na unguwar gate a lokacin da gate yake motsi.
- Katin kamar yadda ake buƙata ta UL3.25 - 62.1.6 za a sanya shi kusa da masu sarrafawa.
- Ba za a yi amfani da na'urar rufewa ta atomatik (kamar mai ƙidayar lokaci, firikwensin madauki, ko makamancin na'urar) ba, kuma
- Babu wata na'urar kunnawa da za a haɗa.
BUTUN TUSHEWA
EP KOYI Maballin Koyi Kariyar Hannun Hannun Hannu
Yana kunna tsarin ilmantarwa da aka sa ido akan kariyar kama. Za a danna wannan maɓallin bayan an haɗa na'urorin kariya na tarko zuwa allon. A lokacin wannan tsari, LEDs za su yi kiftawa. Mai sarrafawa zai bincika na'urorin da aka haɗa. Da zarar wannan tsari ya cika, LEDs za su koma aiki na yau da kullun kuma na'urar za ta sanya ido kan na'urorin 'da aka koyo' da aka haɗa. (Don ƙarin bayani, duba sashin Kariyar Shiga na wannan littafin.)
SAURAN KOYI
Yana saita tafiyar ƙofa don fasalin tsayawa a hankali
Ana amfani dashi yayin saitin farko. Bayan saita iyakoki, matsa kuma ka riƙe wannan maɓallin na tsawon daƙiƙa 2 • 3. Ƙofar za ta buɗe zuwa buɗe iyaka, tsayawa, sannan kuma kusa da iyakar da aka rufe. Wannan yana saita hanyar tafiya ta ƙofar, wanda kuma yana ba da damar hukumar kula da sanin inda ƙofar take a kowane lokaci. 
HANYOYIN TSARE TSAMA DA FUSHI
DIP SWITCH 'D & E'
'D'I, 'D'2 & - *MEP
'0' = 'KASA' 1' = UP
CANZA Dl D2 D3 KOFAR BUDE LOKACIN
| O | O | O | BABU NA'URAR DA AKE HADA | |
| 0 | 0 | 1 | BABU NA'URAR DA AKE HADA | |
| O | 1 | O | HOTO IDO AKAN RUFE | |
| o | 1 | 1 | GABA KAN RUFE | |
| 1 | 0 | HOTO IDO NA BUDE | ||
| 1 | 0 | 1 | GABA KAN BUDEWA | |
| 1 | 1 | o | HOTO IDO AKAN BUDE & RUFE | |
| 1 | 1 | 1 | KISHI ON BUDE & RUFE |
'D'4, 'D'5 & 'D'6 - *MEP
0 = GASKIYA 1'= UP
MUSA D4 D5 D6 LOKACIN BUDE KOFAR
| O | O | O | BABU NA'URAR DA AKE HADA | |
| 0 | 0 | 1 | BABU NA'URAR DA AKE HADA | |
| O | 1 | O | HOTO IDO AKAN RUFE | |
| o | 1 | 1 | GABA KAN RUFE | |
| 1 | 0 | 0 | HOTO IDO NA BUDE | |
| 1 | 0 | 1 | GABA KAN BUDEWA | |
| 1 | 1 | O | HOTO IDO AKAN BUDE & RUFE | |
| 1 | 1 | 1 | KISHI ON BUDE & RUFE |
'D'7,'D'8 &'E'l - *MEP #3
'0' = DOWN'1'= KYAUTA
KASHE 07 D8 El GATE LOKACIN BUDE
| O | O | O | BABU NA'URAR DA AKE HADA | |
| O | O | 1 | BABU NA'URAR DA AKE HADA | |
| O | 1 | O | HOTO IDO AKAN RUFE | |
| 0 | 1 | 1 | GABA KAN RUFE | |
| 1 | O | O | HOTO IDO NA BUDE | |
| o | 1 | GABA KAN BUDEWA | ||
| 1 | 0 | HOTO IDO AKAN BUDE & RUFE | ||
| 1 | 1 | 1 | KISHI ON BUDE & RUFE |
* MEP = Kariyar Shigar da ake Kulawa
'E'2,'E'3 &'E'4 - *MEP #4
'0' = IDOWN'1'= UP
CANZA E2 E3 E4 KOFAR BUDE LOKACIN
| o | o | 1 | BABU NA'URAR DA AKE HADA | |
| 0 | 1 | O | HOTO IDO AKAN RUFE | |
| 0 | 1 | 1 | GABA KAN RUFE | |
| O | O | HOTO IDO NA BUDE | ||
| O | 1 | GABA KAN BUDEWA | ||
| 1 | 1 | O | HOTO IDO AKAN BUDE & RUFE | |
| 1 1 1 GABA KAN BUDE & RUFE | ||||
'E'5,'E'6 &'E'7 - *MEP #5
0 = * KASA 1 = KYAUTA
CANZA E5 E6 E7 KOFAR BUDE LOKACIN
| 0 | 0 | O | BABU NA'URAR DA AKE HADA | |
| 0 | 0 | 1 | BABU NA'URAR DA AKE HADA | |
| O | 1 | O | HOTO IDO AKAN RUFE | |
| o | 1 | 1 | GABA KAN RUFE | |
| 1 | 0 | O | HOTO IDO NA BUDE | |
| 1 | 0 | 1 | GABA KAN BUDEWA | |
| 1 | 1 | O | HOTO IDO AKAN BUDE & RUFE | |
| 1 | 1 | 1 | KISHI ON BUDE & RUFE |
- BUDE - An yi amfani da shi don karewa yayin 2 bude sake zagayowar.
- RUFE - Ana amfani da shi don karewa yayin zagaye na kusa.
- HOTO/EDGE – Nau'in na'urar da ake haɗawa.
- KASA = photo-ido
- UP= mai haɗa baki
LOGIC BOARD PLUGS 
- REV LOOP • Ana amfani da shi don dakatar da ƙofar daga rufewa. Yana rike kofar a bude idan aka kiyaye. Wannan haɗin da ba a sa ido ba ne. Ya kamata a haɗa na'urorin da aka sa ido zuwa matosai na kariyar tarko.
- Akwatin Wuta• Ana amfani da shi don buɗe ƙofar ga motocin gaggawa. Yana buƙatar sigina mai kiyayewa. Yana soke duk na'urorin aminci.
- KAWAI AMFANI DA MOtocin Gaggawa.
- fita • Ana amfani da shi don buɗe ƙofar da/ko riƙe ƙofar a buɗe.
- PHANTOM • Ana amfani da shi don riƙe ƙofar a buɗe lokacin da yake kan iyaka a buɗe. Da zarar kofar ta fara rufe wannan ba ta da wani tasiri. Yana aiki tare da na'urar gano madauki ko idon hoto don rufe wurin da ƙofar ta bi.
- RADIO – Ana amfani da shi don buɗewa, tsayawa da rufe ƙofar. Cikakken iko.
- CIKI DET - Yana dakatar da kofa mai lanƙwasa daga bugun shinge lokacin buɗewa. Lokacin da aka kunna, ƙofar zai tsaya kuma jira har sai an share mai ganowa. Da zarar an share na'urar ganowa, ƙofar za ta ci gaba da buɗewa.
- MAG/SOL - Ana amfani dashi tare da makullin maganadisu ko solenoid. Dubi canjin '84'. Wannan fitowar gudun ba da sanda ce. Ana buƙatar daban taswira ko tushen wuta don aiki tare da wannan haɗin.
- MAG: Relay yana rufe lokacin da ƙofar ke rufe ko rufe.
- SOL: Relay yana rufe na tsawon daƙiƙa 3 yayin da ya fara buɗewa, sannan ya sake fitowa.
- SEC XCOM • 3-waya madugu, zai fi dacewa kariya, amfani da su don sadarwa tsakanin firamare da sakandare raka'a.
DC DRIVER BOARD SWITCHES & PUSHBUTTONS
DIP SWITCH 'A'
'A' 1 - HAGU 1 DAMA
- DOWN Shigar da hannun hagu
- UP Shigar hannun dama
LABARI NA VIEW – Tsaye a gefe guda na ƙofar da aka shigar da mai aiki a kai, yana dubawa ta hanyar buɗe ƙofar. Mai aiki a Hagu = Mai aiki da shigarwa na hannun hagu akan Dama = Shigar da hannun dama
'A' 2 - BUDE BAKI
- KASA Babu jinkiri akan buɗewa.
- JINKILI NA BIYU 1 KAN BUDE
'A' 3 & 4 - KUSANCI
'0' = DOWN 'I'=+ UP
| 0 | 0 | BABU JINKIRIN RUFE | |
| 0 | 1 | 1 JINKILI NA BIYU AKAN RUFE | |
| 1 | 0 | 2 JINKILI NA BIYU AKAN RUFE | |
| 3 JINKILI NA BIYU AKAN RUFE |
MUSA 3 4 ADADIN JINKILI
A5 BA A AMFANI DA WANNAN LOKACIN
BAR A MATSAYI
DIP SWITCH 'B'
'B' 1 - 'B' 3 - BA A AMFANI DA WANNAN LOKACIN
'B' 4- SOLAR
| KASA | Ana amfani dashi akan raka'a inda wutar AC ke da ita kuma ana amfani da batura don madadin kawai |
| UP | Ana amfani dashi akan raka'a lokacin da babu wutar AC kuma ana amfani da hasken rana. |
'B' 5 - DC ALERT
| KASA | KASHE - Naúrar ba ta yin sauti lokacin da yake cikin yanayin DC (AC ba ya nan) |
| UP | ON - Chirp zai yi sauti a duk lokacin da naúrar ke gudana a yanayin DC. (Ana Gudu akan Batir) |
'B' 6 - LBATT ALARM
| KASA | KASHE – Lokacin da aka rufe naúrar zuwa ƙananan yanayin baturi, babu ƙara da zai yi sauti. |
| UP | ON - Lokacin da aka rufe naúrar zuwa ƙananan yanayin baturi, naúrar zata yi hayaniya. |
'B' 7 - KASA LAFIYA/TSARO
| KASA | KASHE - GASKIYA LAFIYA - Lokacin shiga cikin ƙananan yanayin baturi, ƙofar za ta buɗe kuma ta kasance a buɗe. |
| UP | Kunnawa - KASA SAUKI - Lokacin shiga cikin ƙananan yanayin baturi, amintaccen zai rufe. |
'B' 8 - TAFARKIN KAFA
| KASA | KASHE - Ana amfani dashi akan raka'a waɗanda ke da fedar ƙafa. Lokacin da ƙafar ƙafa ya 'kasa' to babu aiki. |
| UP | ON - Wannan maɓalli ya kamata ya kasance don duk raka'o'in da ba su da fedar ƙafa. |
BUTUN TUSHEWA
- BUDE – Bude kofa. Lokacin da aka riƙe ƙasa, a cikin gaggawa, zai ƙetare na'urorin aminci da aka sa ido
- TSAYA – Tsaya gate.
- RUFE – Yana rufe kofar. Lokacin da aka riƙe ƙasa, a cikin gaggawa, zai ƙetare na'urorin aminci da aka sa ido.
DC DRIVER BOARD PLUGS & AIKI
- U, V & W - DC MOTOR (Ma'aikatar Waya) - Wayoyin motoci
- -24 XFMR NEGATIVE (Factory Wired) – Rage gubar na wuta.
- -B BATTERY NEGATIVE (Factory Wired) - Rashin gubar baturi.
- +B BATTERY KYAUTA (Wayar Factory) – Kyakkyawan gubar baturi.
- +24 XFMR KYAUTA (Wayar Factory) – Kyakkyawan jagorar taswira.
- SENSORS (Ma'aikatar Waya) - Haɗin waya 5 daga motar zuwa PCB. Yana ba da izinin jirgi sanin matsayin ƙofar.
- X COM A, B & C (Factory Wired) - Sadarwar waya ta 3 tsakanin allon dabaru da allon direba.
- SV & 24V DC POWER SUPPLY (Factory wired) - Haɗin waya 3 tsakanin allon direba da allon tunani don ƙarfafa allon dabaru.
- LIMIT 1 & LIMIT 2 (Factory Wired) - Waya don buɗewa da rufe iyaka. Tsayawa gate ɗin yayi daga motsin da ya dace.
- Ƙararrawa (Wayar Factory) - Ƙararrawar UL za ta yi sauti bayan wani toshewar ya faru sau biyu a cikin tafiya ɗaya kofa.
- PEDAL FOOT (Wayar Factory) - Haɗin waya 2 zuwa canjin ƙafar ƙafa.
GUDU - Gudun ƙofar.
- 0 = 1' a sakan daya
- 1 = 10 ″ a sakan daya
- 2 = 8 ″ a sakan daya
- 3 = 6 ″ a sakan daya
SANADIN TSAYA - Ƙofar za ta ragu kafin a rufe ta gaba ɗaya.
- 0 - 1 1/2 seconds
- 1 - 2′ sannu a hankali
- 2 - 3′ sannu a hankali
- 3 - 5′ sannu a hankali
(MEP) JAGORANTAR SANTAWA SAI KYAUTAR DANGI
MUHIMMI: KA TABATA NA'URAR MEP DA KAKE AMFANI DA NA'URAR UL.326 DA AKE KIYAYEWA TA HANYAR AMFANI DA OK.
- Bukatun Ƙofar Slide:
- Rufewa - Mafi ƙarancin ido na hoto 1 ko firikwensin gefen.
- Buɗewa – Mafi ƙarancin ido na hoto 1 ko firikwensin baki.
- Bukatun Ƙofar Swing:
- Rufewa - Mafi ƙarancin ido na hoto 1 ko firikwensin gefen.
- Buɗewa – Babu ƙaramar buƙata.
- MEP #1
- Haɗa wayoyi 4 (24V, GND, N.0. & COM) zuwa filogi #1 (wanda ke gefen dama na allon dabaru # 1 zuwa #5)
- Saita maɓallan tsoma masu dacewa
[MEP 1 = Sashe na 1 (C1, C2, C3) ...] - idan kare budewa, kunna 'OPEN' dip switch a kunne.
- idan kare rufewar, kunna 'CLOSE' tsoma maɓalli.
- idan kuna amfani da idon hoto, kashe 'PHOTO/EDGE'.
- idan kuna amfani da firikwensin gefen, kunna maɓallin 'PHOTO/EDGE'.
- MEP #2 (idan an zartar)
- Haɗa wayoyi 4 (24V, GND, NO & COM) zuwa filogi #2.(wanda ke gefen dama na allon dabaru # 1 zuwa #5)
- Saita maɓallan tsoma masu dacewa
[MEP 2 = Sashe na 2 (C4, CS, C6) ...] - idan kare budewa, kunna 'OPEN' dip switch a kunne.
- idan kare rufewar, kunna 'CLOSE' tsoma maɓalli.
- idan kuna amfani da idon hoto, kashe 'PHOTO/EDGE'.
- idan kuna amfani da firikwensin gefen, kunna maɓallin 'PHOTO/EDGE' .
- Ci gaba ta hanyar MEP #5 ko har sai an haɗa duk na'urorin MEP.
- Da zarar an haɗa duk na'urorin MEP, danna & riƙe maɓallin 'EP KOYI'.
- Lokacin da LEDs 'ENTRAP 1' ta hanyar 'ENTRAP 5' suka fara walƙiya, saki maɓallin.
- Duk LEDs 5 zasu kashe kusan daƙiƙa 3.
- Duk 5 LEDs za su yi kiftawa sau 3.
- LEDs masu dacewa tare da MEPs waɗanda aka haɗa za su yi ƙarfi don 3 seconds. (Tabbatar cewa adadin LEDs yayi daidai da adadin MEPs da aka haɗa. Idan lambobin ba su yi daidai ba, duba haɗin wayar kuma maimaita mataki na 6.
Bill of Materials [RAM 3000, RAM 3100, RAM 30-30 DC]
Qty na Sashe Kowane Mai Aiki
| Sashe A'a. Bayanin Sashe RAM 3000 DC RAM 3100 DC | RAM 30-30 DC | |||
| 800-00-85 | Chassis, [R3000s] | 1 | 1 | |
| 800-00-86 | Chassis, R30-30 ACDC | 1 | ||
| 800-02-07 | Mai Rage Gear - Girman 70, Rabo 30: 1 [R3000S] | 1 | 1 | |
| 800-02-08 | Mai Rage Gear - Girman 70, Rabo 60: 1 [R3030S] | 1 | ||
| 800-02-13 | Mai Rage Gear - Girman 43, Rabo 30: 1 [R3000S] | 1 | 1 | |
| 800-04-05 | Motoci, DC 3.3 Nm 24 Vdc 1500 Rpm | 1 | 1 | 1 |
| 800-06-00 | Sprocket – 50Bs15H X 1 1/8 ″ [R3030S] | 1 | ||
| 800-06-05 | Sprocket – 40Bs21 X 1′[R5000S,R3000ACDC] | 1 | ||
| 800-06-07 | Sprocket - 40BS21 x 7/8 ″ [R3000s] | 1 | ||
| 800-08-06 | Pulley, Cast Iron - Ak104H [R3030S] | 1 | ||
| 800-08-45 | Pulley, Bakin Karfe - 5/8' X 2' - Ak20 [R300, R3000S, R3030S] | 1 | ||
| 800-10-42 | Belt, - 4L - 390 | 1 | ||
| 800-12-07 | Shaft, Fitarwa - 2 1/8 ″ X 21″ [R3030S] | 1 | ||
| 800-20-03 | Iyakance Sauyawa [R3030S] | 2 | ||
| 800-20-05 | Limit Switch [R50,R30,R300,R302,R3000S] | 2 | 2 | |
| 800-28-25 | Pivot, Ram 3000/3100 | 1 | 1 | |
| 800-28-45 | Sakin Hannun Pivot | 1 | ||
| 800-44-02 | Ƙarfafa Flange, Ucf211-35 [R3030S] | 2 | ||
| 800-46-11 | Bushing, Pulley Taper Hx-7/8 | 1 | ||
| 800-48-03 | Canjin Canjin Cam 3 1/16 ″ X 4″: Id 2 3/16″ [R3030S] | 2 | ||
| 800-52-12 | Tushen Sarkar, Hanyoyi 34, Girman 50 | 1 | ||
| 800-52-23 | Sarkar #40 (Haɗi 23) | 1 | 1 | |
| 800-52-24 | Sarkar, Iyakance Canjawa #35 (Haɗi 35) | 1 | 1 | |
| 800-54-49 | Iyaka, Brack, Nau'in C | 1 | 1 | |
| 800-54-52 | Iyakance Bracket Canjawa [R300, R30-30 Acdc] | 1 | ||
| 800-56-11 | Akwatin PCB [R302,300,R3000, R30-30, R5700] | 1 | 1 | 1 |
| 800-60-07 | Transformer, Dual 115V/230V Input Tare da Jagororin shigarwa 4 | 1 | 2 | 2 |
| 800-60-10 | Sauya, Rocker | 2 | 2 | 2 |
| 800-60-21 | Wuri, Single Square [R302] | 1 | 1 | 1 |
| 800-60-35 | Gyaran Gada, Mataki Daya, 100V, 35 A, Module, Finai 4, | 1 | 2 | 2 |
| 800-65-01 | Kwamitin Gudanarwa, Logic [AC/DC] | 1 | 1 | 1 |
| 800-65-04 | Hukumar Kulawa, Direba [DC] | 1 | 1 | 1 |
| 800-66-12 | Lexan, Murfin Filastik [R302, R3000, R5700, R30-30 DC] | 1 | 1 | 1 |
| 800-70-00 | Batirin DC, 12Vdc - 7.5Ah [Bbs] | 2 | 2 | 2 |
| 800-70-22 | Ƙararrawar ƙaho 120 Db | 1 | 1 | 1 |
| 800-70-25 | Iyakance Majalisar Canjawar Cam (Hub Da Rollpin) | 1 | 1 | |
| 800-70-35 | Knob - 5/16 ″ - 18 X 1 1/2 ″ | 2 | ||
| 800-70-36 | Knob - 5/16 ″ - 18 x 1/2 ″ | 1 | ||
| 800-70-98 | Alamar Gargaɗi Don Ƙofofi - Slide/Swing | 2 | 2 | 2 |
| 800-75-04 | Haɗin Ƙofa | 1 | 1 | |
| 800-75-14 | Rufe taro [R30-30] | 1 | ||
| 800-75-17 | Rufe taro-R3000,R3100 | 1 | 1 | |
Sashe No. yana wakiltar taro DAYA ko da yake wasu ƙila za su ƙunshi biyu ko fiye na kowane taro
Majalisai [R3000, R3100, R30-30]
RAM 3000 RAM 3100 RAM 30-30
| 800-75-00 Majalisar Makamashi [300,302,3000s] 1 1 | ||||
| 800-28-00 | Hannu, Tubin ƙarfe - 1 ″ X 2″ X 32″ - | 1 | 1 | |
| 800-28-01 | Hannu, Tubin ƙarfe - 1 ″ X 2″ X 42″ - | 1 | 1 | |
| 800-36-53 | Bolt, Hex Head - 5/8 ″ - 11 X 4 | 1 | 1 | |
| 800-38-78 | Kwaya, Hex Head Nylock - 5/8 ″ | 1 | 1 | |
| 800-40-40 | Washer, Flat - Id 5/8 ″ : Od 1 5/16 ″ | 3 | 3 | |
| 800-40-27 | Washer, Flat - Id 1/2 ″ : Od 1 ″ - F436 | 4 | 4 | |
| 800-36-34 | Bolt, Hex Head - 1/2 "- 13 x 2" | 1 | 1 | |
| 800-38-76 | Kwaya, Hex Head Nylock - 1/2 ″ | 1 | 1 | |
| 800-28-30 | Ƙarshen Ƙarshen Filastik - 1'X 2' | 2 | 2 | |
| 800-54-37 | Bracket, Ƙofar Ciki 2020 | 1 | 1 | |
| 800-54-10 | Bracket, External Channel | 1 | 1 | |
| 800-28-30 | Ƙarshen Ƙarshen Filastik - 1'X 2' | 2 | 2 | |
| RAM 3000 | RAM 3100 | RAM 30-30 | ||
| 800-75-03-L | Hagu-Hagu Maɗaukakin Hannu Mai Nauyi [30-30] | 1 | ||
| 800-75-03-R | Taro Mai Nauyi Mai Nauyi (30-30) | 1 | ||
| RAM 3000 | RAM 3100 | RAM 30-30 | ||
RAM 3000 RAM 3100 RAM 30-30
| 800-75-42 Torque Limited Assym [30-30 DC] 2 | ||||
| 800-06-10 | Sprocket - 50B54 [R3030S] | 1 | ||
| 800-26-02 | Friction Disc, Torque Limited - Id 4 1/4 ″ : Od 7 ″ [R3030S] | 2 | ||
| 800-26-11 | Tension Washer, Torque Limited - Id 3 7/8 ″ : Od 6 ″ [R3030S] | 1 | ||
| 800-34-70 | Saita Screw - 1/2 "- 13 X 1/2" | 2 | ||
| 800-36-22 | Bolt, Hex Head - 3/8 "- 16 X 1 1/4" | 3 | ||
| 800-42-42 | Hanya Maɓalli - 1/2 ″ Sq. X 8 ″ | 1 | ||
| 800-46-12 | Bushing, Karfe - ID 3 13/16" - OD 4 3/16" [R3030] | 1 | ||
| 800-58-01 | Arbor Nut, Torque Limited [R3030S] | 1 | ||
| 800-58-12 | Arbor Washer, Torque Limited [R3030S] | 2 | ||
| 800-58-32 | Arbor, Torque Limited (R3030S) tashar girma | 1 | ||
RAM 3000 RAM 3100 RAM 30-30
| 800-75-50 Clamp Majalisar Sakin [R302,R3000] 1 1 | ||||
| 800-28-35 | Saki, Hannun Lever - 5/8 ″ - 11 X 1 7/8 ″ Zare [R3000S] | 1 | 1 | |
| 800-38-18 | Na goro, Hex Head - 5/8 ″ | 1 | 1 | |
| 800-40-40 | Washer, Flat - Id 5/8': Od 1 5/16' | 2 | 2 | |
| 800-36-55 | Bolt, Hex Head - 5/8 "- 11 x 2" | 1 | 1 | |
| 800-48-80 | Clamp - Baya [R3000S] | 1 | 1 | |
| 800-48-81 | Clamp - Gaban [R3000S] | 1 | 1 | |
| 800-54-20 | Baka, Clamp Hannu (R302 R3000S) | 1 | 1 | |
| 800-36-30 | Bolt, Hex Head - 1/2 "- 13 x 1" | 2 | 2 | |
| 800-40-76 | Washer, Makullin Raba - 1/2 ″ | 2 | 2 | |
RAM 3000 RAM 3100 RAM 30-30
| 800-76-04 Iyakance Maɗaukakin Shaft [R3000,R3100] 1 1 | ||||
| 800-12-11 | Shaft, Iyakance Sauyawa-1/2 X 4 1/4 [R3000AC/DC] | 1 | 1 | |
| 800-06-02 | Sprocket - 35Bs17 X 1/2 ″ (2 1/4 ″ Od - Babu Maɓalli) [R5000S, R3000S] | 1 | 1 | |
| 800-44-04 | Bearing, Hatimi - 1621-2Rs-Nr X 1/2 ″ W/Ring Ring [R100, R5000S, R3000S] | 2 | 2 | |
| 800-70-10 | Collar, Iyakar Shaft - 1/2 ″ | 2 | 2 | |
| 800-48-02 | Cam, Iyaka - Karfe - 1/2 ″ [R3000S] | 2 | 2 | |
- RAMSET AUTOMATIC GATE SYSTEMS INC.
- 9116 DE GARMO AVE
- SUN VALLEY, CA 91352
- 800-771-7055
Takardu / Albarkatu
 |
RAMSET TSARIN KOFAR AUTOMATIC RAMSET RAM3100DC-PE Babban Ma'aikatan Ƙofar Swinging Gate [pdf] Jagoran Jagora RAM3100DC-PE High Traffic Swinging Gate Operators, RAM3100DC-PE, High Traffic Swinging Gate Operators |
