RATH Umurnin Mai amfani da Cibiyar

Manual na shigarwa & Ayyuka

Cibiyar Umurni

Anyi a cikin Garanti na Shekara 3 na Amurka

N56W24720 N. Corporate Circle Sussex, WI 53089 800-451-1460 www.rathcommunications.com
Saukewa: RP8500PBXG. 6 12/20

Na gode da siyaasing a RATH® Command Center. We are the largest Emergency Communication Manufacturer in North America and have been in business for over 35 years.
Muna alfahari da samfuranmu, sabis, da tallafi. Kayanmu na Gaggawa sune mafi inganci. Experiencedungiyoyin goyan bayanmu na ƙwararrun abokan ciniki suna nan don samun sauƙin taimakawa tare da shirye-shiryen rukunin yanar gizo, girkawa, da kuma kulawa. Babban fatanmu shine kwarewarku tare da mu ya kasance kuma zai ci gaba da zarce tsammanin ku.
Na gode da kasuwancin ku,
Rungiyar RATH®

Abubuwan da ake buƙata

Hada da:

• Wayar Cibiyar Umurni (za a ɗora a cikin ma'auni ko haɗa da madaidaicin tebur don hawan tebur)
• Module na rarrabawa
• Wayoyin tsarin (Cables pigtail, igiyar wuta, igiyar layin waya, kebul na Ethernet)
• 1/8 ″ Hex Allen Wrench (samfurin Dutsen majalisar kawai)
  

Ba a Hada da:

• Mafi ƙarancin 22 ko 24 AWG murɗaɗɗen kebul mai kariya
• 120 vac power
• Multimeter
• Wayar Analog (an ba da shawarar don magance matsala)
• Analog ko layin wayar dijital (kawai idan tsarin yana buƙatar ikon yin kira)
• Small Phillips sukudireba
• Kayan aikin hawa
• Samar da wutar lantarki tare da ajiyar baturi (RATH® part #
  RP7700104 ko RP7701500)
• RATH® 2100 ko 2400 jerin wayoyi
  

Tsarin al'ada Tsarin aiki

Matakan Shigarwa

1. Dutsen Module Rarraba da wutar lantarki tare da ajiyar baturi a wurin da ya dace (ana bada shawarar kabad na cibiyar sadarwa ko dakin inji).
2. Toshe wutar lantarki tare da ajiyar baturi cikin daidaitaccen madaidaicin bangon bango 120v. Lura: Za'a yi amfani da tsarin ta ƙasan 120v, 60Hz, AC outlet wanda aka kiyaye shi ta mafi girman 15A. Lura: Idan ana amfani da RP7701500, tabbatar da cajin naúrar na akalla sa'o'i 8 kafin gwajin tsarin. Don ƙarin bayani, koma zuwa RP7701500 Jagoran mai amfani wanda aka haɗa tare da naúrar.
3. Yin amfani da igiyar wutar lantarki da aka bayar, toshe gefen haɗin mata 3-pin zuwa shigar da wutar lantarki kusa da maɓallin wuta akan Module Rarrabawa. Toshe gefen 3-prong namiji na kebul na wutar lantarki cikin kowane buɗaɗɗen kantuna a bayan wutar lantarki tare da ajiyar baturi. Jira don kunna Module Rarraba har sai an yi duk haɗin gwiwa.
4. Sanya Wayar Cibiyar Umurni:
   Dutsen Tebur: Shigar da tsayawar kafa a bayan wayar Cibiyar Umurni kuma zaɓi wuri kowane takamaiman mai shi. Idan tsarin ya wuce yankuna 16, haɗa ƙarin na'urorin wasan bidiyo na maɓalli zuwa Cibiyar Umurni ta amfani da masu haɓakawa. Koma zuwa zanen da ke ƙasa don haɗa masu shimfiɗa da kafa.
   Dutsen Majalisar: Yi amfani da Allen Wrench da aka tanadar don cire akwatin baya ko farantin baya daga majalisar. Cire duk wani bugun ƙwanƙwasa. Dutsen akwatin baya ko faranti a wurin kowane takamaiman mai shi ta amfani da kayan hawan da ya dace. Sake haɗa majalisar ministocin.
5. Gudu guda 22 ko 24 AWG murɗaɗɗen, kebul mai kariya daga wayar Cibiyar Umurnin baya zuwa Module Rarrabawa. Wannan kebul guda ɗaya yana ba da sadarwa da ƙarfi. Babu ƙarin iko da ake buƙata. Lura: Matsakaicin tsayin gudu na waya daga Module Rarraba zuwa Cibiyar Umurni shine 6,200′ ƙafa don 22 AWG da 3,900′ ƙafa don 24 AWG.
6. Yin amfani da jak ɗin biscuit, murɗa murɗaɗɗen, biyu masu garkuwa sun sauka a gefen Cibiyar Umurnin zuwa skru ja da kore na jack ɗin biscuit. Haɗa igiyar layin wayar da aka tanada tare da Cibiyar Umurni cikin jack ɗin RJ11 na mace akan jack ɗin biscuit. Toshe dayan ƙarshen igiyar layin wayar cikin tashar shigar da ke bayan Cibiyar Umurni.
   
7. Gudu aƙalla guda 22 ko 24 AWG murɗaɗɗen, kariya daga kowace waya zuwa Module Rarrabawa.
   Lura: Matsakaicin tsayin gudu na waya daga Module Rarraba zuwa waya shine ƙafa 112,500' don 18 ko 22 AWG da ƙafa 70,300' don 24 AWG.
   IDAN HUKUMAR SUPERVISOR MAI AMFANI DA RATH®, WURIN GUDUWAR WIRE BA ZAI WUCE 4,000′ FT.
8. Yi haɗi zuwa wayoyi:
   Yankunan Aikace-aikacen Gudun Hijira: Yi amfani da jak ɗin biscuit don murƙushe murɗaɗɗen, biyu masu garkuwa da suka sauka a gefen wayar zuwa ja da koren skru akan jack ɗin biscuit. Toshe igiyar layin wayar da aka tanada tare da wayar cikin jack ɗin RJ11 na mace akan jack ɗin biscuit. Toshe sauran ƙarshen igiyar layin wayar cikin jack ɗin RJ11 da ke bayan allon kewayawa a cikin wayar.
   Aikace-aikacen Elevator: Ɗauki murɗaɗɗen, garkuwa biyu da waya da ma'auratan kamar yadda masana'anta ke kira, kamar ana amfani da daidaitaccen layin wayar analog.

Rarraba Module Waya

Zabin 1: 12-36 Tsarin Yanki
Don tsarin yanki na 12-36, cire sukurori a bayan Module Rarraba kuma cire murfin don fallasa haɗin RJ45 na ciki.

• Kowane katin da aka shigar zai sami haɗin RJ45 guda uku
• A saman kowace tashar jiragen ruwa na RJ45, akwai lakabin da ke nuna haɗi:
  • SLT ita ce tashar da ake amfani da ita don haɗa Wayoyin Gaggawa
  • DKP ita ce tashar jiragen ruwa da ake amfani da ita don haɗa wayar Cibiyar Umurni
  • TWT ita ce tashar jiragen ruwa da ake amfani da ita wajen layin Telco
• Toshe kebul ɗin pigtail RJ45 da aka kawo cikin haɗin RJ45 akan Module Rarraba bin ginshiƙi na wayoyi da tsarin launi na ƙasa
  • Koma zuwa saman katunan don ganin irin nau'in tashar tashar RJ45 da adadin kari
  • Ya kamata a yi amfani da tsarin launi iri ɗaya don katin farko da duk ƙarin katunan
  • Tsarin yana amfani da T568-A don fitar da wayoyi
• Katin farko da aka sanya zai kasance koyaushe:
  • Port 1: (01-04) Haɗin don Wayoyin Gaggawa 4 (SLT)
  • Tashar jiragen ruwa 2: (05-06) Haɗi don Layukan Telco 2 (TWT)
  • Tashar jiragen ruwa 3: (07-08) Haɗin kai har zuwa Wayoyin Rukunin Umurni 2 (DKP)
    
• Duk katunan bayan Katin 1 koyaushe za a yi amfani da su don haɗa ƙarin Wayoyin Gaggawa. Don Kati 2:
  • Port 1: (01-04) Haɗin kai don Wayoyin Gaggawa 4
  • Port 2: (05-06) Haɗin kai don Wayoyin Gaggawa 2
  • Port 3: (07-08) Haɗin kai don Wayoyin Gaggawa 2
    

Lura: KADA KA shigar da komai a cikin katin na shida mai lakabin "VMS".

• Da zarar an yi duk hanyoyin haɗin RJ45, haɗa nau'i-nau'i masu murƙushe, masu garkuwa zuwa ɓangarorin pigtail na igiyoyin waya.
  Zabin 2: 56-96 Tsarin Yanki
• Kowane katin da aka shigar zai sami haɗin RJ45 guda shida
• A saman kowane haɗin RJ45 akwai alamar da ke nuna haɗi:
  • S01-S_ ita ce tashar da ake amfani da ita don haɗa Wayoyin Gaggawa
  • TD (1-2)(3-4) tare da digo a ƙarƙashin D shine tashar da ake amfani da ita don haɗa wayar (s) Cibiyar Umurni
  • TD (1-2)(3-4) tare da digo a ƙarƙashin T shine tashar jiragen ruwa da ake amfani da ita wajen layin Telco.
• Toshe igiyoyin pigtail RJ45 da aka kawo zuwa cikin haɗin haɗin haɗin RJ45 suna bin ginshiƙi da tsarin launi na ƙasa
  • Koma zuwa saman katunan don ganin wane nau'in dubawar RJ45 da adadin kari
  • Ya kamata a yi amfani da tsarin launi iri ɗaya don katin farko da duk ƙarin katunan
  • Tsarin yana amfani da T568-A don fitar da wayoyi
• Katin farko da aka sanya zai kasance koyaushe:
  • Port 1: (S01-S04) Haɗin don Wayoyin Gaggawa 4
  • Port 2: (S05-S08) Haɗin don Wayoyin Gaggawa 4
  • Port 3: (S09-S12) Haɗin don Wayoyin Gaggawa 4
  • Port 4: (S13-S16) Haɗin don Wayoyin Gaggawa 4
  • Tashar jiragen ruwa 5: (D1-2) Haɗin kai don Wayoyin Rukunin umarni har zuwa 2
  • Port 6: (T1-2) Haɗin kai har zuwa 2 a wajen Layin Telco
    
• Duk katunan bayan Katin 1 koyaushe za a yi amfani da su don haɗa ƙarin Wayoyin Gaggawa. Don Kati 2:
  • Port 1: (01-04) Haɗin kai don Wayoyin Gaggawa 4
  • Port 2: (05-08) Haɗin kai don Wayoyin Gaggawa 4
  • Port 3: (09-12) Haɗin kai don Wayoyin Gaggawa 4
  • Port 4: (13-16) Haɗin kai don Wayoyin Gaggawa 4
  • Port 5: (17-18) Haɗin kai don Wayoyin Gaggawa 2
  • Port 6: (19-20) Haɗin kai don Wayoyin Gaggawa 2
    
• Da zarar an yi duk hanyoyin haɗin RJ45, haɗa nau'i-nau'i masu murƙushe, masu kariya a kan ɓangarorin pigtail na kayan aikin wayoyi.
  9. Kunna 120vac wadata (idan ba a riga an yi ba).
  10. Kunna Module Rarrabawa.

Sub-Master Phones

Tsarin Cibiyar Umurnin RATH® ya zo tare da wayar tushe guda ɗaya. Zai iya ɗaukar ƙarin wayar tushe guda ɗaya wacce ke haɗa zuwa tashar tashar DKP ta biyu akan katin farko. Idan tsarin ku ya ƙunshi ƙarin ƙarin wayoyi biyu na tushe, za a sami ƙarin kati na tashar tashar DKP kawai. Ƙarin wayoyi na tashar tushe za su dawo zuwa Module Rarraba kamar yadda babban Cibiyar Umurni da aka kwatanta a shafi na 4.

Wayoyin Dakin Inji

Cibiyar Umurni ta RATH® na iya samun wayoyi masu yawa na "Dakin Injin" da aka haɗa su. Ana amfani da Wayoyin Dakin Na'ura (RATH® part # 2300-630RC) don kiran kowane ɗayan wayoyin da aka haɗa daga wani wuri ban da inda cibiyar umarni ta farko take. 2300-630RCs suna waya daidai da wayoyi. Bayan haɗa duk 2300-630RCs, waya guda ɗaya murɗaɗɗen, garkuwar 22 ko 24 AWG biyu daga kowane ɗayan tashoshin SLT na buɗe akan Module Rarraba zuwa farantin bangon mace RJ11 (ba a haɗa su ba). Haɗa igiyar RJ11 namiji a bayan 2300-630RC kuma toshe shi cikin farantin bango. Zamar da 2300-630RC zuwa kan farantin bango don hawa a wuri.
Don yin kira daga 2300-630RC zuwa wayoyi, ɗaga wayar hannu kuma buga lambar ƙarar wayar da kuke ƙoƙarin isa (Ex.ample: Waya 1 = 2001, Waya 2 = 2002). Don kira daga 2300-630RC zuwa wayar cibiyar umarni, ɗaga wayar hannu kuma buga 0.

Saita Kwanan Wata da Lokaci

Yi matakai masu zuwa akan wayar Cibiyar Umurni.

1. Shigar da Yanayin Shirin:
   a. Kira 1#91
   b. Shigar da Kalmar wucewa 7284
2. Shirya yankin lokaci:
   a. Kira 1002 mai biye da lambar yankin lokaci mai dacewa:
   Yankin Gabas = 111 Tsawon Lokacin Dutsi = 113
   Yankin Tsakiyar Lokaci = 112 Yankin Lokacin Pacific = 114
   b. Taɓa maɓallin GREEN a tsakiyar wayar idan an gama
3. Shirya kwanan wata (tsarin watannin shekara):
   a. Dial 1001 sannan kwanan wata (Example: 1001 15 02 2011 don Fabrairu 15, 2011)
   b. Taɓa maɓallin GREEN a tsakiyar wayar idan an gama
4. Shirya lokaci (lokacin soja ciki har da minti-minti-na biyu):
   a. Kira 1003 sannan lokacin (Example: 1003 143000 da karfe 2:30 na rana) b. Taɓa maɓallin GREEN a tsakiyar wayar idan an gama
5. Don fita Yanayin Shirin bugun kira 00 sai kuma maɓallin GREEN

Shirye-shiryen Wayar Gaggawa

Wayoyin an riga an tsara su don Memory Location 1 don buga 3931 don fara kiran Cibiyar Umurni.
Lura: Wayoyin don shigarwa na lif ba a riga an shirya su ba.

Ana iya tsara tsarin don buga lambar waje idan ba a amsa kiran ba a Cibiyar Umurni (na zaɓi). Don yin wannan, aiwatar da matakai masu zuwa a Cibiyar Umurni:

1. Danna maɓallin wayar lasifikar
2. Kira na 1, 3, 4
3. Kira 9, lambar waje, #, * don adana lambar
4. Tabbatar da nunin Cibiyar Umurni yana nuna "An Gabatar" sannan lambar wayar da aka shigar
5. Danna maballin wayar kakakin don katsewa
   Lura: Don kashe isar da kira, buga 1, 3, sannan kuma maɓallin kore.
6. Shirya ko gyara saƙon wurin wayar. Duk wayoyi suna zuwa tare da saƙon wurin tsoho. Dole ne a canza ko a kashe saƙo a duk wayoyi.

Zabin 1: 2100 Series Wayoyin

1. Danna ENTER don shigar da Yanayin shirye-shirye
2. Latsa 1, 3, ENTER, 3
3. Latsa 6, maɓallin RECORD, bayan saƙon magana da ƙara, "Don sadarwa ta hanyoyi biyu, danna * a kowane lokaci" zuwa ƙarshe, TSAYA.
4. Latsa 6, PLAY/Dakata don kunna saƙo
5. Latsa ka riƙe STOP na tsawon daƙiƙa 3 don fita shirye-shirye
   Lura: Don babu saƙo, danna ENTER don shigar da shirye-shirye, 1, 3, ENTER, 0, danna ka riƙe STOP na daƙiƙa 3.

Zabin 2: 2400 Series Wayoyin

1. Danna maɓallin ON/KASHE akan faifan maɓalli a cikin wayar
2. Zamar da maɓallin S15 zuwa ƙasa ON/PROGRAM
3. Danna 7,*, 3
4. Latsa 4, *, lokacin da ƙara ya ƙare magana saƙon ƙara, "Don sadarwa ta hanyoyi biyu, danna # sau huɗu bayan ƙarar" zuwa ƙarshen, danna maɓallin VOL blue.
5. Bayan an danna maballin VOL blue, sakon zai sake kunnawa
6. Zamar da canjin S15 zuwa sama zuwa matsayin "1".
7. Danna maɓallin ON/KASHE akan faifan maɓalli a cikin wayar
   Lura: Don babu saƙo, danna maɓallin ON/KASHE, zazzage maɓallin S15 zuwa ON/ PROGRAM, danna 7, *, 0, zamewa S15 sauyawa zuwa matsayin "1", kuma danna maɓallin ON/KASHE.

Umarnin Aiki

Matsayin Nuni:

1. Hasken Jajayen LED: Kira mai shigowa ko haɗe zuwa ƙungiya ta waje
2. Blue LED Haske: Kira mai aiki
3. Blue LED walƙiya: Kira a riƙe

Amsa Kira a Cibiyar Umurnin:

1. Ɗaga wayar hannu don amsa kiran mai shigowa na farko. Dole ne Cibiyar Umurni ta yi ringi kafin a iya amsa kiran.
2. Idan kira da yawa suna shigowa, danna jan fitilar LED kusa da kiran da ake so (wannan zai sanya ainihin kiran a riƙe).
   Lura: Wataƙila wayar tana kan aiwatar da kunna saƙon wurin lokacin da aka amsa kiran a Cibiyar Umurni. Bi saƙon da ke cikin saƙon wurin don dakatar da saƙon da kafa sadarwa ta hanyoyi biyu.

Cire haɗin Kira:

1. Zaɓi LED mai shuɗi mai walƙiya da ake so kuma danna *, # maɓallan.
2. Dole ne a cire haɗin kowane kira daban-daban.
   Lura: Idan ka ajiye wayar hannu kafin ka cire haɗin kowane kira, LED(s) za su kasance cikin haske. Ɗaga wayar hannu, danna LED mai haske, maɓallin lamba 5, sannan *, #. Don cire haɗin, ajiye wayar hannu. Maimaita kowane LED mai haske.

Haɗuwa da Kira Tuni yana Ci gaba:

1. Ɗauki wayar hannu, danna jajayen LED, sannan maɓallin lamba 5.
2. Za ku kasance cikin tattaunawa ta hanyoyi uku tare da ƙungiyar waje da wuri.

Kira Wuri:

1. Ɗauki wayar hannu kuma danna maɓallin don wurin da ake so.

Shirya matsala