RCF HDL 6-A Active Subwoofer Array Module
GABATARWA
Bukatun tsarin ƙarfafa sauti na zamani sun fi girma fiye da da. Bayan aiki mai tsabta - matakan matsin lamba mai girma, madaidaiciyar kai tsaye da ingancin sauti sauran al'amura suna da mahimmanci ga kamfanonin haya da samar da kayayyaki kamar rage nauyi da sauƙin amfani don inganta sufuri da lokaci.
HDL 6-A yana canza ra'ayi na manyan tsararrun tsararru, yana ba da wasan kwaikwayo na farko zuwa faɗaɗa kasuwar ƙwararrun masu amfani.
JAMA'AR TSIRA DA GARGADI
MUHIMMAN NOTE
Kafin haɗa ta amfani da ko rigging na tsarin, da fatan za a karanta wannan jagorar a hankali kuma ajiye shi a hannu don tunani na gaba. Ya kamata a yi la'akari da littafin a matsayin wani ɓangare na samfurin kuma dole ne ya raka tsarin lokacin da ya canza ikon mallakar a matsayin madaidaicin shigarwa da amfani da kuma matakan tsaro. RCF SpA ba zai ɗauki kowane alhakin shigarwa da/ko amfani da samfurin ba daidai ba.
GARGADI
- Don hana haɗarin gobara ko girgiza wutar lantarki, kar a taɓa saka wannan kayan ga ruwan sama ko zafi.
- Tsarin layin TT+ ya kamata a rikitar da shi kuma ya gudana ta ƙwararrun ƙwararrun ƙwararrun ma'aikata ko ma'aikatan da aka horar da su ƙarƙashin kulawar ƙwararrun ƙwararru.
- Kafin yin magudin tsarin a hankali karanta wannan jagorar.
KIYAYEN TSIRA
- Dole ne a karanta dukkan matakan tsaro, musamman na tsaro da kulawa ta musamman, saboda suna ba da mahimman bayanai.
- Samar da wutar lantarki daga mains
Mains voltage yana da isasshen girma don haɗa haɗarin lantarki; shigar da haɗa wannan samfurin kafin shigar da shi.
Kafin kunna wutar lantarki, tabbatar cewa an yi duk haɗin kai daidai da voltage na mains ɗin ku yayi daidai da voltage wanda aka nuna akan farantin kima akan naúrar, idan ba haka ba, da fatan za a tuntuɓi dilan RCF ɗin ku.
Abubuwan ƙarfe na naúrar suna ƙasa ta hanyar kebul na wutar lantarki. Na'urar da ke da CLASS I za a haɗa ta zuwa madaidaicin soket tare da haɗin ƙasa mai karewa.
Kare kebul na wutar lantarki daga lalacewa; a tabbata an sanya shi ta hanyar da ba za a iya taka ta ko murkushe shi da abubuwa ba.
Don hana haɗarin girgiza wutar lantarki, taɓa buɗe wannan samfur: babu sassan ciki waɗanda mai amfani ke buƙatar shiga. - Tabbatar cewa babu wani abu ko ruwa da zai iya shiga cikin wannan samfurin, saboda wannan na iya haifar da gajeriyar da'ira.
Wannan na'urar kada ta kasance a fallasa ga ɗigowa ko fantsama. Babu wani abu da ke cike da ruwa, kamar vases, da za a sanya a wannan na'ura. Kada a sanya tushe tsirara (kamar kyandir masu haske) akan wannan na'urar. - Kar a taɓa yin ƙoƙarin aiwatar da kowane ayyuka, gyare-gyare ko gyare-gyare waɗanda ba a bayyana su ba a cikin wannan jagorar.
Tuntuɓi cibiyar sabis ɗin ku mai izini ko ƙwararrun ma'aikata idan ɗayan waɗannan abubuwan sun faru:- samfurin baya aiki (ko yana aiki ta hanya mara kyau).
- Kebul na wutar lantarki ya lalace.
- Abubuwa ko ruwaye sun shiga cikin naúrar.
- Samfurin ya kasance ƙarƙashin tasiri mai nauyi.
- Idan ba a yi amfani da wannan samfur na dogon lokaci ba, cire haɗin kebul na wutar lantarki.
- Idan wannan samfurin ya fara fitar da wani bakon wari ko hayaki, kashe shi nan da nan kuma cire haɗin kebul na wutar lantarki.
- Kada ka haɗa wannan samfurin zuwa kowane kayan aiki ko na'urorin haɗi waɗanda ba a hango ba.
Don dakatar da shigarwa, yi amfani da wuraren da aka keɓe kawai kuma kar a yi ƙoƙarin rataya wannan samfurin ta amfani da abubuwan da basu dace ba ko ƙayyadaddun su don wannan dalili. Hakanan duba dacewar saman goyan bayan da aka ɗora samfurin (bango, rufi, tsari, da sauransu), da kuma abubuwan da aka yi amfani da su don haɗe-haɗe (anchors, screws, brackets ba RCF ba da sauransu), wanda dole ne ya ba da garantin tsaro na tsarin / shigarwa akan lokaci, kuma la'akari, don example, girgizar injin da aka saba haifarwa ta masu fassara. Don hana haɗarin faɗuwar kayan aiki, kar a tara raka'a da yawa na wannan samfurin sai dai idan an ƙayyade wannan yuwuwar a cikin littafin mai amfani. - RCF SpA tana ba da shawarar cewa an shigar da wannan samfurin ta ƙwararrun ƙwararrun masu sakawa (ko kamfanoni na musamman) waɗanda za su iya tabbatar da shigarwa daidai da ba da shaida bisa ga ƙa'idodin da ke aiki.
Duk tsarin sauti dole ne ya bi ƙa'idodi da ƙa'idodi game da tsarin lantarki. - Taimako da trolleys.
Ya kamata a yi amfani da kayan aikin akan trolleys ko goyan baya, inda ya cancanta, waɗanda masana'anta suka ba da shawarar. Dole ne a motsa kayan aiki / goyan baya / trolley taron tare da taka tsantsan. Tsaya kwatsam, ƙarfin turawa da yawa da benaye marasa daidaituwa na iya sa taron ya juye. - Akwai abubuwa da yawa na inji da na lantarki da za a yi la'akari da su yayin shigar da tsarin sauti na ƙwararru (ban da waɗanda ke da tsayayyen sauti, kamar matsin sauti, kusurwar ɗaukar hoto, amsa mitar, da sauransu).
- Rashin ji.
Fitarwa ga matakan sauti masu girma na iya haifar da asarar ji na dindindin. Matsayin ƙarar sauti wanda ke haifar da asarar ji ya bambanta da mutum zuwa mutum kuma ya dogara da tsawon lokacin bayyanarwa. Don hana haɗarin haɗari ga matakan ƙarar sauti, duk wanda aka fallasa ga waɗannan matakan ya kamata ya yi amfani da isassun na'urorin kariya. Lokacin da ake amfani da transducer mai iya samar da matakan sauti masu girma, don haka ya zama dole a sa matosai ko belun kunne masu kariya. Dubi ƙayyadaddun fasaha na hannu don sanin matsakaicin matakin matsin sauti.
Don hana faruwar hayaniya akan igiyoyin siginar layi, yi amfani da igiyoyin da aka tantance kawai kuma a guji sanya su kusa da:
- Kayan aikin da ke samar da filayen lantarki masu ƙarfi.
- Wutar lantarki
- Layukan lasifikar.
KARFIN AIKI
- Sanya wannan samfurin nesa da kowane tushen zafi kuma koyaushe tabbatar da isasshiyar zagayawa a kusa da shi.
- Kar a yi lodin wannan samfur na dogon lokaci.
- Kada a tilasta abubuwan sarrafawa (maɓallan, ƙwanƙwasa, da sauransu).
- Kada a yi amfani da kaushi, barasa, benzene ko wasu abubuwa masu canzawa don tsaftace sassan wannan samfurin.
HANKALI
Don hana haɗarin girgiza wutar lantarki, kar a haɗa zuwa wutar lantarki yayin da ake cire grille
GABAN TSARE AIKI
- Kar a hana matattarar samun iska na naúrar. Sanya wannan samfur mai nisa daga kowane tushen zafi kuma koyaushe tabbatar da isasshiyar zagayawa a kusa da ma'aunin samun iska.
- Kada a yi lodin wannan samfurin na tsawon lokaci mai tsawo.
- Kada a taɓa tilasta abubuwan sarrafawa (maɓallai, ƙugiya, da sauransu).
- Kada a yi amfani da kaushi, barasa, benzene ko wasu abubuwa masu canzawa don tsaftace sassan wannan samfurin.
HDL 6-A
HDL 6-A babban iko ne mai aiki na gaske wanda ke shirye don amfani da tsarin yawon shakatawa don ƙananan al'amuran girma zuwa matsakaici, ciki da waje. An sanye shi da woofers 2 x 6, da direbobin 1.7 ″, yana ba da ingantaccen ingancin sake kunnawa da matakan matsin sauti mai ƙarfi tare da ginanniyar 1400W mai ƙarfi na dijital. amplifier wanda ke ba da mafi girman SPL, yayin rage buƙatar makamashi.
Kowane bangare, daga wutar lantarki zuwa allon shigarwa tare da DSP, zuwa fitarwa stages to woofers da direbobi, an akai-akai da musamman ɓullo da ta RCF ta gogaggen injiniyoyi teams domin, tare da duk aka gyara a hankali dace da juna.
Wannan cikakken haɗin kai na duk abubuwan haɗin gwiwa yana ba da damar yin aiki mafi girma kawai da matsakaicin amincin aiki, amma kuma yana ba masu amfani sauƙin sarrafawa da toshe & wasa ta'aziyya.
Bayan wannan muhimmiyar hujja, masu magana da aiki suna ba da advan mai mahimmancitages: yayin da masu magana da yawa sukan buƙaci dogon kebul na USB, asarar makamashi saboda juriya na kebul shine babban al'amari. Ba a ganin wannan tasirin a cikin lasifikan da aka yi amfani da su a inda amplifier yana da nisan santimita biyu kacal daga transducer.
Yin amfani da ci-gaba na neodymium maganadiso da sabon gida mai ban sha'awa wanda aka gina daga plywood mara nauyi da polypropylene, yana da ƙarancin nauyi na ban mamaki don sauƙin sarrafawa da tashi.
HDL 6-A shine mafi kyawun zaɓi lokacin da ake buƙatar aikin tsararrun layi da saiti mai sauri da sauƙi dole. Tsarin ya ƙunshi masu fassara na zamani na RCF; babban direban muryar muryoyin murya mai ƙarfi 1.7 ″ wanda aka ɗora akan madaidaicin 100° x 10° waveguide yana isar da tsayuwar murya tare da babban ma'ana da ƙarfi mai ban mamaki.
HDL 12-AS
HDL 12-AS shine abokin subwoofer na HDL 6-A. Gidajen woofer 12 ″, HDL 12-AS, ƙaƙƙarfan ƙaƙƙarfan ƙaƙƙarfan shinge ne kuma yana fasalta dijital mai ƙarfi na 1400 W. amplififi. Yana da madaidaicin madaidaicin don ƙirƙirar gungu na HDL 6-A mai tashi tare da yin fice. Godiya ga ƙaƙƙarfan girmansa ana iya ɗauka cikin sauƙi kuma yana da sauri da sauƙi don fara amfani da ginanniyar sitiriyo crossover (DSP) tare da mitar giciye mai daidaitawa don haɗa tsarin tsararrun layin.
Yana fasalta ginin sitiriyo na sitiriyo na dijital (DSP) tare da mitar giciye mai daidaitawa don haɗa layin tsararrun layin HDL 6-A ko tauraron dan adam.
Makanikai masu haɗaka duka biyu masu sauri ne kuma abin dogaro. Gishirin gaban mai nauyi mai nauyi yana da rufin wuta. Gaskiya ta musamman ga sautin kumfa mai goyan baya a ciki yana taimakawa ƙarin kariya na masu juyawa daga ƙura.
ABUBUWAN WUTA DA SATA GARGADI
- An tsara tsarin don yin aiki a cikin maƙiya da yanayi masu buƙata. Duk da haka yana da mahimmanci a ɗauka musamman
kula da wutar lantarki ta AC kuma saita rarraba wutar lantarki mai dacewa. - An tsara tsarin don zama GROUNDE. Yi amfani da haɗin ƙasa koyaushe.
- PowerCon appliancer na'urar cire haɗin wutar lantarki ta hanyar AC kuma dole ne ya kasance mai sauƙin isa yayin shigarwa da bayan shigarwa.
YANZU
Masu zuwa sune buƙatun dogon lokaci da kololuwar halin yanzu don kowane samfurin HDL 6-A/HDL12-AS:
|
VOLTAGE |
DOGON LOKACI |
| 230 Volt |
3.15 A |
|
115 Volt |
6.3 A |
Ana samun jimillar abin da ake buƙata na yanzu yana ninka buƙatun yanzu guda ɗaya ta adadin kayayyaki. Don samun mafi kyawun wasan kwaikwayon tabbatar da cewa jimillar fashe abin da ake buƙata na tsarin ba ya haifar da gagarumin voltage sauke a kan igiyoyi.
GASKIYA
Tabbatar cewa duk tsarin yana ƙasa da kyau. Duk wuraren da aka kafa ƙasa za a haɗa su da kumburin ƙasa ɗaya. Wannan zai inganta rage hums a cikin tsarin sauti.
AC CABLES DAISY CAINS
Kowane samfurin HDL 6-A/HDL12-AS ana ba da shi tare da Wuta akan kanti zuwa sarkar daisy sauran kayayyaki. Matsakaicin adadin kayayyaki da zai yiwu ga sarkar daisy shine:
230 VOLT: 6 modules duka
115 VOLT: 3 modules duka
GARGAƊI – HADARIN WUTA
Mafi girman adadin samfura a sarkar daisy zai wuce matsakaicin madaidaicin mai haɗin Icon Power kuma ya haifar da yanayi mai yuwuwar haɗari.
WUTA DAGA WUTA UKU
Lokacin da aka kunna tsarin daga rarraba wutar lantarki guda uku yana da matukar mahimmanci don kiyaye ma'auni mai kyau a cikin nauyin kowane lokaci na ikon AC. Yana da matukar muhimmanci a haɗa subwoofers da tauraron dan adam a cikin lissafin rarraba wutar lantarki: duka subwoofers da tauraron dan adam za a rarraba tsakanin matakai uku.
RIGGING DA TSARIN
RCF ta haɓaka cikakkiyar hanya don saitawa da rataye tsarin tsararrun layi na HDL 6-A wanda ya fara daga bayanan software, shinge, riging, kayan haɗi, igiyoyi, har sai shigarwa na ƙarshe.
GARGAƊI NA GWAMNATIN RIGGING DA KIYAYEN TSIRA
- Dakatar da lodi ya kamata a yi tare da taka tsantsan.
- Lokacin tura tsarin koyaushe sanya kwalkwali da takalma masu kariya.
- Kada ka ƙyale mutane su wuce ƙarƙashin tsarin yayin aikin shigarwa.
- Kar a taɓa barin tsarin ba tare da kulawa ba yayin aikin shigarwa.
- Kada a taɓa shigar da tsarin akan wuraren samun damar jama'a.
- Kada a taɓa haɗa wasu lodi zuwa tsarin tsararru.
- Kada a taɓa hawan tsarin yayin ko bayan shigarwa.
- Kar a taɓa fallasa tsarin zuwa ƙarin lodi da aka ƙirƙira daga iska ko dusar ƙanƙara.
GARGADI
- Dole ne a yi magudin tsarin kamar yadda doka da ka'idojin kasar da ake amfani da tsarin suka tanada. Yana da alhakin mai shi ko mai damfara don tabbatar da cewa tsarin ya yi magudi daidai da dokokin ƙasa da na gida.
- Koyaushe bincika cewa duk sassan tsarin rigging waɗanda ba a samar da su daga RCF ba sune:
- dace da aikace-aikace
- yarda, bokan da alama
- yadda ya kamata
- cikin cikakkiyar yanayi
- Kowace hukuma tana tallafawa cikakken nauyin sashin tsarin da ke ƙasa. Yana da matukar mahimmanci cewa kowace majalisar ministocin tsarin tana da kyau a bincika.
"RCF SIFFOFIN AZZARIN" SOFTWARE DA SAFETY FACTOR
An ƙera tsarin dakatarwa don samun ingantaccen yanayin tsaro (dangane da daidaitawa). Yin amfani da software na "HDL50 Siffar Designer" yana da sauƙin fahimtar abubuwan aminci da iyaka ga kowane ƙayyadaddun tsari. Don ƙarin fahimtar abin da kewayon aminci da injiniyoyi ke aiki ana buƙatar gabatarwa mai sauƙi: HDL 6-A kayan aikin injiniyoyi an gina su tare da UNI EN 10025 Karfe. Software na Hasashen RCF yana ƙididdige ƙarfi akan kowane ɓangaren da aka danne na taron kuma yana nuna ƙarancin aminci ga kowane hanyar haɗi. Ƙarfe na tsari yana da ƙugiya-damuwa (ko daidai Ƙarfin Ƙarfi) mai lankwasa kamar haka:
An siffanta lanƙwan da maki biyu masu mahimmanci: Ƙirar Hutu da Ƙimar Haɓaka. Matsakaicin matsi na ƙarshe shine kawai matsakaicin matsakaicin da aka samu. Ana amfani da matsanancin damuwa na ƙarshe azaman ma'auni na ƙarfin kayan don ƙirar tsari, amma ya kamata a gane cewa sauran kaddarorin ƙarfi na iya zama mafi mahimmanci. Ɗayan waɗannan tabbas shine Ƙarfin Haɓaka. Zane-zane na damuwa-ƙarfe na tsarin ƙarfe yana nuna hutu mai kaifi a cikin damuwa ƙasa da ƙarfin ƙarshe. A wannan mawuyacin hali, kayan yana haɓaka da yawa ba tare da wani canji a cikin damuwa ba. Damuwar da hakan ke faruwa ana kiranta da Matsayin Haɓaka. Nakasawa na dindindin na iya zama mai lahani, kuma masana'antar ta karɓi nau'in filastik 0.2% a matsayin iyaka na sabani wanda duk hukumomin gudanarwa ke ɗaukan karɓuwa. Don tashin hankali da matsawa, madaidaicin danniya a wannan nau'in daidaitawa ana bayyana shi azaman yawan amfanin ƙasa.
A cikin software na hasashen mu Abubuwan Tsaro ana lissafin la'akari da Matsakaicin Matsakaicin Matsakaicin daidai yake da Ƙarfin Haɓaka, bisa ga ƙa'idodi da ƙa'idodi na duniya da yawa.
Sakamakon Safety Factor shine mafi ƙarancin duk abubuwan aminci da aka ƙididdige, don kowane hanyar haɗi ko fil.
Wannan shine inda kuke aiki dashi SF=7
Dangane da ƙa'idodin aminci na gida da kan halin da ake ciki, abin da ake buƙata na aminci zai iya bambanta. Yana da alhakin mai shi ko mai damfara don tabbatar da cewa tsarin ya yi magudi daidai da dokokin ƙasa da na gida.
Software na "RCF Siffar Designer" yana ba da cikakken bayani game da yanayin aminci ga kowane ƙayyadaddun tsari.
An rarraba sakamakon a aji hudu:
| GREEN: | GASKIYA TSARO > 7 | SHAWARWARI |
| WUYA 4> | GASKIYA TSARO > 7 | |
| Orange 1.5> | GASKIYA TSARO > 4 | |
| JAN | BAYANIN TSIRA <1.5 | BA A TABA YARDA BA |
GARGADI
- Dalili na aminci shine sakamakon dakarun da ke aiki akan sandunan gardama da tsarin gaba da na baya da kuma fil kuma ya dogara da masu canji da yawa:
- adadin kabad
- tashi mashaya kwana
- kusurwoyi daga kabad zuwa kabad. Idan ɗaya daga cikin sauye-sauyen da aka ambata ya canza yanayin aminci dole ne a sake ƙididdige shi ta amfani da software kafin rigingimun tsarin.
- Idan an ɗauko sandar gardawa daga injina 2 a tabbata cewa kusurwar sandar gardama daidai ne. Kusurwar da ta bambanta da kusurwar da aka yi amfani da ita a cikin software na tsinkaya na iya zama mai haɗari. Kada ka ƙyale mutane su tsaya ko wucewa ƙarƙashin tsarin yayin aikin shigarwa.
- Lokacin da shingen gardama ya karkata musamman ko tsararru tana lanƙwasa sosai tsakiyar nauyi na iya fita daga hanyoyin haɗin baya.
A wannan yanayin hanyoyin haɗin gaba suna cikin matsawa kuma hanyoyin haɗin baya suna tallafawa jimlar nauyin tsarin tare da matsawa gaba. Koyaushe bincika sosai tare da software na “HDL 6-A Siffar Designer” duk irin waɗannan yanayi (har ma da ƙaramin adadin kabad).
Tsarin musamman ya karkata
Tsarin mai lankwasa sosai
HASASHE SOFTWARE - MAI SIFFOFIN SIFFOFIN
HDL 6-A Siffar Designer software ce ta wucin gadi, mai amfani ga saitin tsararru, don injiniyoyi da kuma shawarwarin da aka saita daidai.
Mafi kyawun saitin jeri na lasifikar ba zai iya yin watsi da abubuwan da suka dace na acoustics da sanin cewa abubuwa da yawa suna taimakawa ga sakamakon sautin da ya dace da tsammanin. RCF yana ba mai amfani da kayan aiki masu sauƙi waɗanda ke taimakawa saitin tsarin a cikin sauƙi kuma abin dogara.
Nan ba da jimawa ba za a maye gurbin wannan software da cikakkiyar software don tsararraki da yawa da hadaddun simintin wuri tare da taswira da jadawalin sakamakon.
RCF tana ba da shawarar wannan software don amfani da kowane nau'in daidaitawar HDL 6-A.
SHIGA SOFTWARE
An haɓaka software ɗin tare da Matlab 2015b kuma yana buƙatar ɗakunan karatu na shirye-shiryen Matlab. A farkon shigarwa mai amfani yakamata ya koma zuwa kunshin shigarwa, samuwa daga RCF website, dauke da Matlab Runtime (ver. 9) ko kunshin shigarwa wanda zai sauke Runtime daga web. Da zarar an shigar da ɗakunan karatu daidai, ga duk nau'ikan software masu zuwa mai amfani zai iya saukar da aikace-aikacen kai tsaye ba tare da Runtime ba. Akwai nau'i biyu, 32-bit da 64-bit, don zazzagewa.
MUHIMMI: Matlab baya goyon bayan Windows XP don haka HDL50-ShapeDesigner (32 bit) baya aiki da wannan sigar OS.
Kuna iya jira ƴan daƙiƙa kaɗan bayan danna sau biyu akan mai sakawa saboda software tana bincika idan akwai Laburaren Matlab. Bayan wannan mataki shigarwa ya fara. Danna mai sakawa na ƙarshe sau biyu (duba saki na ƙarshe a sashin saukewa na mu website) kuma bi matakai na gaba.
Bayan zaɓin manyan fayiloli don software na HDL6-SahpeDesigner (Hoto 2) da Matlab Libraries Runtime mai sakawa yana ɗaukar mintuna kaɗan don tsarin shigarwa.
ZANIN TSARIN
Software na HDL6 Shape Designer ya kasu kashi biyu na macro: ɓangaren hagu na dubawa an sadaukar da shi ga masu canji na ayyuka da bayanai (girman masu sauraro don rufewa, tsawo, adadin kayayyaki, da dai sauransu), ɓangaren dama yana nuna sakamakon aiki.
Da farko mai amfani ya kamata ya gabatar da bayanan masu sauraro yana zaɓar menu mai dacewa da ya dace dangane da girman masu sauraro da kuma gabatar da bayanan lissafi. Hakanan yana yiwuwa a ayyana tsayin mai sauraro.
Mataki na biyu shine ma'anar tsararrun zabar adadin kabad a cikin tsararru, tsayin rataye, adadin wuraren rataye da nau'ikan da ake samu na gardama. Lokacin zabar maki biyu masu rataye la'akari da waɗancan wuraren da aka sanya su a iyakar ƙwanƙwasa.
Ya kamata a yi la'akari da tsayin jeri zuwa gefen ƙasa na jirgin sama, kamar yadda aka nuna a hoton da ke ƙasa.
Bayan shigar da duk bayanan da ke cikin ɓangaren hagu na mai amfani, ta danna maɓallin AUTOSPLAY software zai yi:
- Wurin rataye don abin ɗauri tare da matsayi A ko B da aka nuna idan an zaɓi wurin ɗauka ɗaya, na baya da na gaba idan an zaɓi maki biyu.
- Flybar karkatar da kwana da majalisar splays (kusurwar da dole ne mu saita zuwa kowace majalisa kafin dagawa ayyuka).
- Ƙaunar da kowace hukuma za ta ɗauka (idan akwai maki ɗaya) ko kuma za mu ɗauka idan za mu karkatar da gungu tare da amfani da injuna biyu. (maki biyu karba).
- Jimlar nauyi da ƙididdige Factor na Tsaro: idan saitin da aka zaɓa bai bayar da Factor Safety> 1.5 saƙon rubutu yana nuna a cikin launi ja gazawar saduwa da ƙaramin yanayin aminci na injina.
Algorithm na autosplay an ƙirƙira don ingantaccen ɗaukar hoto na girman masu sauraro. Ana ba da shawarar yin amfani da wannan aikin don inganta tsarin tsararru. Algorithm mai maimaitawa yana zaɓar wa kowane majalisa mafi kyawun kusurwa da ke cikin injiniyoyi
SHAWARAR GURIN AIKI
Da yake jiran software na siminti na hukuma da tabbatacce, RCF yana ba da shawarar yin amfani da HDL6 Shape Designer tare da Sauƙaƙe Mayar da hankali 3. Saboda buƙatar hulɗar tsakanin software daban-daban, aikin da aka ba da shawarar yana ɗaukar matakai masu zuwa don kowane tsararru a cikin aikin ƙarshe:
- Mai Zane Siffa: Masu sauraro da saitin tsararru. Lissafi a cikin yanayin “autosplay” na karkatar da gardama, majalisa da splays.
- Mayar da hankali 3: yana ba da rahoto anan kusurwoyi, karkatar da shingen tashi da saitattun abubuwan da aka ƙirƙira ta Siffar Siffar.
- Mai Zane Siffa: Gyaran kusurwoyin splay na hannu idan simintin a cikin Mayar da hankali 3 bai ba da sakamako mai gamsarwa ba don bincika yanayin aminci.
- Mayar da hankali 3: yana ba da rahoto anan sabbin kusurwoyi da karkatar da jirgin sama wanda Mai tsara Siffai ya samar. Maimaita hanya har sai an sami sakamako mai kyau.
KAYAN RIGGING
| Bayani | Na'urorin haɗi p/n | |
| 1 | BARRA SOSPENSIONE HDL6-A E HDL12-AS
|
13360360 |
| 2 | SAURAN KULLE PIN | 13360022 |
| 3 | FLY BAR DUBA HDL6-A | 13360372 |
| 4 | BANGASKIYA DOMIN KE TSAYE KULLE RUWAN CUTAR AKAN SUBWOOFER. | |
| 5 | BANGASKIYA DUNIYA |
| 1 | 13360129 | SARKIN TASARAR HALI. Yana ba da damar isashen sarari don rataya mafi yawan kwantenan sarkar motoci 2 kuma yana guje wa duk wani tasiri akan ma'auni na tsaye na tsararru lokacin da aka dakatar da shi daga wurin ɗauka guda ɗaya. |
| 2 | 13360372 | FLY BAR DUBA HDL6-A + 2 SAURAN LOCK PIN (SARE PART P/N 13360022) |
| 3 | 13360351 | AC 2X AZIMUT Plate. Yana ba da damar sarrafa manufa a kwance na tari. Dole ne a haɗa tsarin tare da motoci 3. 1 gaba da 2 haɗe zuwa farantin azimuth. |
| 4 | 13360366 | KART TARE DA KYAUTA AC KART HDL6 + 2 SAURAN LOCK PIN (SARE PART 13360219) |
| 5 | 13360371 | Abubuwan da aka bayar na AC TRUSS CLAMP HDL6 + 1 SAURAN LOCK PIN (SARE PART P/N 13360022) |
| 6 | 13360377 | Dutsen POLE 3X HDL 6-A + 1 SAURAN LOCK PIN (SARE PART 13360219) |
| 7 | 13360375 | LINKBAR HDL12 ZUWA HDL6 + 2 SAURAN LOCK PIN (SARE PART 13360219) |
| 8 | 13360381 | RUWAN RUWA 06-01 |
HANYAR RIGGING
Shigarwa da saitin ya kamata a yi ta ƙwararrun ma'aikata masu izini waɗanda ke kiyaye ingantattun Dokokin ƙasa don Rigakafin Hatsari (RPA).
Yana da alhakin mutumin da ke shigar da taron don tabbatar da cewa wuraren dakatarwa / gyarawa sun dace da abin da aka yi nufi.
Koyaushe gudanar da aikin dubawa na gani da aiki na abubuwan kafin amfani. Idan akwai shakku kan ingantaccen aiki da amincin abubuwan, dole ne a cire waɗannan daga amfani da sauri.
GARGADI – Wayoyin karfen da ke tsakanin fitilun makullai na kabad da kayan aikin riging ba a yi niyya don ɗaukar kowane kaya ba. Dole ne kawai a ɗauki nauyin ma'auni ta hanyar haɗin gaba da Splay/Baya tare da na gaba da na baya na lasifika da firam ɗin Flying. Tabbatar cewa an shigar da dukkan fil ɗin kulle kuma an kulle su cikin aminci kafin ɗaga kowane kaya.
A cikin misalin farko yi amfani da software na HDL 6-A Shape Designer don ƙididdige saitin tsarin da ya dace da kuma duba ma'aunin tsaro.
HDL6 flybar yana ba da damar dakatar da HDL6-A da HDL12-AS.
SANTA FLYBAR
HDL6 flybar yana ba da damar saita mashaya ta tsakiya a cikin jeri biyu daban-daban "A" da "B".
Kanfigareshan “B” yana ba da damar mafi kyawun karkata na tari.
SATA TSAKIYAR TSARKI A MATSAYI "B".
Ana samar da wannan kayan haɗi a cikin tsarin "A".
Don saita shi a cikin tsarin "B":
- Cire fil ɗin cotter ɗin “R”, ciro linchpins “X” da makullin makullin “S” da sauri.
- Ɗaga mashaya ta tsakiya sannan sake sanya shi yin nunin "B" akan lakabin kuma ramukan "S" sun dace tare.
- Sake haɗa ginshiƙan gardama yana maido da filayen “S”, da linchpins “X” da maƙallan “R”.
DUBA MATSAYI
- DUBA MATSAYI
- DUBA MATSAYI "A".
- DUBA MATSAYI "B".
HANYAR DAKATA TSARIN
- GUDA DAYA DAYA
Sanya wurin ɗaukar gardama kamar yadda aka nuna a software, mutunta matsayin "A" ko "B".
DUAL PICK POINT
Yana ba da damar ɗaga gungu tare da jakunkuna biyu suna ƙara zaɓin zaɓi na zaɓi (pn 13360372).
KARE FLYBAR ZUWA FARKO HDL6-A MAGANAR
- Saka maƙallan makulli na gaba "F"
- Juya madaidaicin baya kuma adana shi zuwa gadar tashi tare da madaidaicin makullin makulli na baya "S" zuwa ramin Haɗin Haɗin HDL6.
TSARE NA BIYU HDL6- MAI MAGANA ZUWA NA FARKO (kuma a jere)
- Tsare madaidaicin makulli na gaba "F"
- Juya madaidaicin baya kuma a tsare shi zuwa lasifikar farko ta amfani da fitin makulli mai sauri na baya “P”, zaɓi kusurwar karkarwa kamar yadda aka nuna akan software.
KARE FLYBAR ZUWA FARKO HDL12-ASKE MAGANA
- Saka maƙallan makulli na gaba "F"
- Juya madaidaicin baya kuma aminta dashi zuwa gadar tashi tare da maɓallin makulli mai sauri na baya "S" akan rami na HDL12 Link Point.
TSARE NA BIYU HDL12-A MATSAYIN MAI MAGANA ZUWA NA FARKO (kuma a jere):
- Cire sashin gaba "A"
- Tsare madaidaicin makulli na gaba "F"
- Juya madaidaicin baya kuma amintar da shi zuwa lasifikar farko ta amfani da fitin makulli mai sauri na baya "P".
CLUSTER HDL12-AS + HDL6-A
- Yin amfani da fil ɗin makulli mai sauri “P”, amintar da haɗin haɗin gwiwa zuwa HDL6-A mai magana akan ramin “Link point to HDL12-AS”, akan sashin baya.
- Juya madaidaicin HDL6-A na baya kuma toshe shi akan madaidaicin haɗin tsakanin ɓangarorin ƙarfe biyu.
- Amintacce HDL6-A zuwa HDL12-AS ta amfani da fitin makulli na gaba "F" da na baya "P".
GARGAƊI: ko da yaushe amintattu biyu na baya “P”.
HANYAR TSARO
Cire mashaya ta tsakiya "A" daga mashigar gardama ta hanyar zare linchpins "X" da makullin makullin "S".
TSARKI AKAN SUB HDL12-AS
- Tsare mashigar tashi zuwa HDL12-AS
- Tsare mashigin “B” (kamar yadda aka nuna a hoto) zuwa gadar tashi ta amfani da madaidaicin makulli mai sauri “S” (bi alamar “stacking point”)
- Amintacce HDL6-A zuwa gadar gardama ta amfani da maƙallan makulli na gaba "F1".
- Zaɓi kusurwar karkarwa (kusurwoyi masu kyau suna nuna ƙaramin karkata na lasifikar) kuma amintar da shi tare da maɓallin kulle mai sauri na baya "P".
Don samun karkatawar lasifikar (tabbatacce ko mara kyau) kuna buƙatar daidaita ƙimar kusurwar sandar stacking tare da ƙimar kwana ɗaya da aka bayyana akan maƙallan baya na lasifikar.
Wannan hanyar tana aiki ga kowane karkata sai dai kusurwoyi na 10 da 7 na sandar stacking, wanda don haka kuna buƙatar ci gaba ta hanya mai zuwa:
- kwana 10 na sandar tarawa yana buƙatar daidaitawa tare da kusurwa 0 akan sashin baya na lasifikar.
- kwana 7 na sandar tarawa yana buƙatar daidaitawa tare da kusurwa 5 akan sashin baya na lasifikar.
GARGADI: KULLUM TABBATAR DA TSINTSIN TSARI A KOWANE SHARHI
TSAKI AKAN SUBWOOFERS DABAN (WANDA HDL12-AS)
- Matsa madaidaicin madaidaicin “C” zuwa saka M20 akan subwoofer
- Cire duk ƙafafu na filastik "P".
- Tsare shingen gardama zuwa madaidaicin aminci ta amfani da linchpins “X” kuma ka toshe su tare da tarkace “R”.
- Daidaita ƙafafu don daidaita ma'aunin gardama a kan subwoofer sannan a toshe su da ƙwaya don guje wa kwancewa.
- Haɗa lasifikar HDL6-A tare da hanya iri ɗaya.
GARGADI: KULLUM TABATAR DA TSINTSIN TSARI A CIKIN KOWANE SIRRI
GASKIYAR TSARO
- Cire duk ƙafafu na filastik "P".
- Daidaita ƙafafu don daidaita ma'aunin gardama a kan subwoofer sannan a toshe su da ƙwaya don guje wa kwancewa.
- Haɗa lasifikar HDL6-A tare da hanya iri ɗaya.
GARGAƊI: KADA KA TABBATAR DA DUNIYAR TSARI A KOWANE SIRRI
DOGARO DA POLE TARE DA KARYA
- Ajiye madaidaicin dutsen sandar zuwa gadar gardama tare da linchpins “X” sannan a toshe su da fitilun “R”
- Toshe mashin gardama zuwa sandar ta hanyar dunƙule ƙulli "M".
- Haɗa lasifikar HDL6-A tare da hanya iri ɗaya.
GARGAƊI: TABBATA KOYAUSHE
- TSARIN TSARI A CIKIN KOWANE TSARIN
- KYAUTA POLE
MAGANAR POLE TARE DA DUMIN POLY 3X HDL 6-A
- Tsare shingen gardama akan sandar ta hanyar dunƙule ƙulli "M"
- Haɗa masu magana HDL6-A tare da hanya iri ɗaya da aka yi amfani da ita akan tari akan sub HDL12-AS
GARGADI: KADA KA TABBATAR
- TSARIN TSARI A CIKIN KOWANE TSARIN
- KYAUTA POLE
SAUKI
SANAR DA MAGANAR KAN KART
- Tsare gefen gaba na lasifikar zuwa kart ta amfani da makullin makulli mai sauri "F"
- Kiyaye gefen baya na lasifikar zuwa kart ta amfani da makullin kulle mai sauri "P".
A hankali: ramin da za a yi amfani da shi shine 0° akan mashin baya na lasifikar. - Ci gaba da mai magana na biyu yana maimaita matakai "1" da "2"
GARGADI: An ƙera kart ɗin don ɗaukar lasifika har 6.
KIYAYYA DA KIYAYE - WARWARE
TRANSPORT - KYAUTA
A lokacin sufuri tabbatar da abubuwan da aka gyara ba su da damuwa ko lalacewa ta hanyar sojojin inji. Yi amfani da abubuwan sufuri masu dacewa. Muna ba da shawarar amfani da kart ɗin yawon shakatawa na RCF HDL6-A don wannan dalili.
Saboda maganin saman su, kayan aikin riging suna kariya na ɗan lokaci daga danshi. Koyaya, tabbatar da abubuwan haɗin suna cikin bushewa yayin adanawa ko lokacin sufuri da amfani.
LAyukan TSIRA GA TSIRA - HDL6-A KART
Kada ku tara fiye da HDL6-A shida akan Kart ɗaya.
Yi taka tsantsan yayin motsi tarin akwatuna shida tare da Kart don guje wa tipping.
Kada a matsar da tari a gaban-zuwa-baya na HDL6-A's (gefe mai tsayi); ko da yaushe matsar da tari gefe don kauce wa tipping.
BAYANI
| HDL 6-A | HDL 12-AS | |
| Amsa Mitar | 65 Hz - 20 kHz | 40 Hz - 120 kHz |
| Max Spl | 131db ku | 131db ku |
| Hannun Rufe A kwance | 100° | – |
| Matsayin Rufe A tsaye | 10° | – |
| Direban matsawa | 1.0" Neo, 1.7"vc | – |
| Woofer | 2 x 6.0" neo, 2.0"vc | 12 ", 3.0" vc |
| Bayani | ||
| Mai Haɗa Input | XLR namiji | Sitiriyo XLR |
| Mai Haɗin Kaɗawa | XLR mace | Sitiriyo XLR |
| Hankalin shigarwa | + 4 dBu | - 2 dBu/+ 4 dBu |
| PROCESSOR | ||
| Mitar hanyar wucewa | 900 Hz | 80-110 Hz |
| Kariya | Thermal, RMS | Thermal, RMS |
| Iyakance | Mai iyaka iyaka | Mai iyaka iyaka |
| Sarrafa | HF gyara | Volume, EQ, lokaci, xover |
| AMPRAYUWA | ||
| Jimlar Ƙarfin | 1400 W Mafi Girma | 1400 W Mafi Girma |
| Yawan mitoci | 400 W Mafi Girma | – |
| Ƙananan Mitoci | 1000 W Mafi Girma | – |
| Sanyi | convection | convection |
| Haɗin kai | Powercon in-fita | Powercon in-fita |
| BAYANI NA JIKI | ||
| Tsayi | 237 mm (9.3 ") | 379 mm (14.9 ") |
| Nisa | 470 mm (18.7 ") | 470 mm (18.50 ") |
| Zurfin | 377 mm (15 ") | 508 mm (20 ") |
| Nauyi | 11.5Kg (25.35 lbs) | 24Kg (52.9 lbs) |
| Majalisar ministoci | Haɗin PP | Baltic Birch Plywood |
| Hardware | Haɗin kanikanci | Kayan aiki na tsararru, sandal |
| Hannu | 2 gaba | 2 gefe |
Tallafin Abokin Ciniki
RCF SpA: Ta Raffaello, 13 - 42124 Reggio Emilia - Italiya
tel. +39 0522 274411 - fax +39 0522 274484 - e-mail: rcfservice@rcf.it
Takardu / Albarkatu
 |
RCF HDL 6-A Active Subwoofer Array Module [pdf] Manual mai amfani HDL 6-A Active Subwoofer Array Module, HDL 6-A, Module Array Subwoofer Active |
