SCT X4 Manual Umarnin Ayyuka na Shirye-shiryen

SCT X4 Mai Shirye-shiryen Ayyuka

SATA

1. Tabbatar an kashe abin hawa kuma an ajiye shi lafiya.
2. Cikakkun buɗe murfin kuma tabbatar an kiyaye shi.
3. Nemo ECU akan bangon wuta a gefen abin hawa (duba kore kibiya a ƙasa).
4. Tabbatar da sakin shafin makullin (kibiya mai kore a ƙasa) kafin motsi hannun mai haɗa launin toka. Cire haɗin duk 3 na masu haɗin ECU.
   Lura: DOLE ne ka cire haɗin duk masu haɗin kai guda 3 a duk lokacin da kake shigarwa ko cire waƙar ka.
5. Haɗa mai haɗin ECU da aka bayar tare da X4 zuwa haɗin 1 akan ECU kamar yadda aka nuna a sama da zuwa Akwatin SCT.
6. Haɗa X4 zuwa akwatin SCT ta amfani da kebul na OBDII,
7. Haɗa akwatin SCT zuwa baturi ta amfani da baturi clamps bayar. Baturi Clamps Shigar: Ja zuwa tabbatacce, baki zuwa korau.

Loading TUNE CUSTEM DINKA

1. Tabbatar kun kammala matakan saitin akan Shafi na 1 & 2.
2. Akan X4 zaɓi MOTAR SHIRIN.3. Review kuma karban SANARWA MAI AMFANI DA TITI.
3. Zaɓi wane Tune Custom file kuna son yin shiri.
4. Idan wannan shine filasha na farko, zaku ga SAVING STOCK DATA. Wannan al'ada ce.
5. X4 yanzu za ta shirya a cikin waƙar al'ada file. Idan an gama, sake haɗa ECU ta hanyar cire haɗin baturin clamps da sake haɗa duk haɗin ECU 3.

MAYAR DA MOTAR KU ZUWA SAYA

Koma hannun jari

1. Tabbatar da saitin na'urar ta amfani da matakan da ke sama.
2. Akan X4 zaɓi MOTAR SHIRIN.
3. Review kuma karɓi sanarwar Amfani da Titin kuma latsa KOMA ZUWA STOCK.
4. Tabbatar da Komawa Hannun jari.
5. X4 yanzu zai shirya a cikin hannun jari file.
6. Idan an gama, sake haɗa ECU.

LIVELINK GEN-II / ADVANTAGE III

Don amfani da LiveLink ko Advantage III tare da 2021-2022 F-150 da fatan za a sabunta zuwa sigar saki na yanzu gami da kowane ingantaccen sabunta bayanai.

LIVELINK GEN-II: Shafin 2.9.4.0 ko sabo, gami da duk wani fitaccen sabunta bayanai.
ADVANTAGE 3: Shafin 3.4 Gina 22305.0 ko sabo.

Don taimakon fasaha don Allah je zuwa www.scflash.com kuma danna goyon baya.