SIMcom SIM7022-EVB Jagorar Mai Amfani mara waya ta Magani

SIM7022-EVB Jagoran mai amfanin V1.00

Feature 24: software download interface

6. Bayan sabuntawa ya yi nasara, kunna SW1 zuwa KASHE jihar, sannan kunna SW101 zuwa ON jihar, sannan kunna wuta.

Feature 25: An gama sauke software

3.4 AT Sadarwar Umurni

Umurnin AT a halin yanzu suna da ayyuka marasa cikawa waɗanda ke buƙatar ci gaba da sabuntawa bayan ci gaba na gaba. Har ila yau ana sabunta abubuwan da ke cikin wannan babin bisa la'akari da ainihin halin da ake ciki.

3.4.1UART Serial Sadarwa

Tsarin firam ɗin bayanai na serial da ƙimar baud ɗin serial na module SIM7022 sune kamar haka.

1. Saita tsarin firam ɗin bayanan serial
   SIM7022 tana goyan bayan tsarin firam ɗin bayanai da yawa. Tsarin firam ɗin bayanan tsoho shine ɓangarorin bayanai 8, 1 tasha bit, kuma babu daidaiton bit.
   Shafin 15: Tsarin firam na UART

   UART frame format	Tsarin tallafi
   Bayanin bayanai	8 ku,7bit
   Dakatar kadan	1 bit
   Samun gaskiya	M, Ko da, Babu

2. Saita adadin baud na tashar tashar jiragen ruwa na serial
   SIM7022 yana goyan bayan nau'ikan ƙimar baud na gama gari. Ma'aikata tsoho baud kudi na misali module ne
   115200, kuma yana goyan bayan daidaita ƙimar baud ta atomatik. Kuna iya amfani da AT+IPR don saita ƙimar baud.
   Table 16: UART baud goyon bayan kudi

   Tallafin ƙimar baud UART	Adadin tallafi
   Serial sadarwar baud rate	4800,9600,19200,38400,57600,115200,230400,460800,921600 230400,460800,921600
   Serial port adaptive baud rate	4800,9600,19200,38400,57600,115200

   Umarnin ƙimar baud gama gari don tashar jiragen ruwa na serial:
   Table 17: UART gama-gari yawan ayyukan baud
   

   Ayyukan ƙimar baud gama gari na UART	Umarni masu alaƙa
   Yi tambaya adadin baud na yanzu	AT+IPR?
   Saita ƙimar baud tsoho na taya	AT+IPR=
   Saita ƙimar baud na ɗan lokaci don dacewa ta atomatik	AT+IPR=0

Karin bayani

4.1 Takardun Magana
Table 18: Takardun Magana

4.1 Kalmomi da Bayani

Table 19: Kalmomi da bayani

4.3 Gargaɗi na Tsaro
Shafin 20: gargadin aminci

Alamomi	Abubuwan bukatu
	Lokacin a asibiti ko wani wurin kiwon lafiya, kiyaye hani game da amfani da wayoyin hannu. Kashe tashar wayar hannu ko ta hannu, kayan aikin likita na iya zama masu hankali kuma basa aiki akai-akai saboda tsangwama na makamashin RF.
	Kashe tashar salula ko wayar hannu kafin shiga jirgin sama. Tabbatar an kashe shi. An haramta aikin na'urori marasa waya a cikin jirgin sama don hana tsangwama ga tsarin sadarwa. Manta tunanin yawancin waɗannan umarnin na iya yin tasiri ga amincin jirgin, ko ɓata matakin shari'a na gida, ko duka biyun.
	Kada a yi aiki da tashar salula ko wayar hannu a gaban iskar gas ko hayaƙi mai ƙonewa. Kashe tashar wayar salula lokacin da kake kusa da gidajen mai, ma'ajiyar mai, masana'antar sinadarai, ko kuma inda ake ci gaba da ayyukan fashewa. Ayyukan kowane kayan lantarki a cikin yanayi mai yuwuwar fashewa na iya zama haɗari na aminci.
	Tashar wayar ku ko wayar hannu tana karɓa da watsa makamashin mitar rediyo yayin kunnawa. Tsangwama RF na iya faruwa idan ana amfani da ita kusa da saitin TV, rediyo, kwamfutoci, ko wasu kayan lantarki.
	Tsaron hanya ya zo farko! Kada a yi amfani da tashoshi na hannu ko wayar hannu lokacin tuƙi abin hawa, sai dai idan an ɗora ta a cikin riƙo don aiki mara hannu. Kafin yin kira tare da tashar hannu ko wayar hannu, yi fakin abin hawa.
	Tashoshin wayar salula na GSM ko wayoyin hannu suna aiki akan siginar mitar rediyo da cibiyoyin sadarwar salula kuma ba za a iya garantin haɗawa a kowane yanayi ba, musamman tare da kuɗin wayar hannu ko katin SIM mara aiki. Yayin da kuke cikin wannan yanayin kuma kuna buƙatar taimakon gaggawa, da fatan za a tuna amfani da kiran gaggawa. Domin yin ko karɓar kira, tashar salula ko wayar hannu dole ne a kunna kuma a cikin yankin sabis tare da isasshen ƙarfin siginar salula. Wasu cibiyoyin sadarwa ba sa ba da izinin kiran gaggawa idan ana amfani da wasu sabis na cibiyar sadarwa ko fasalulluka na waya (misali ayyukan kullewa, ƙayyadadden bugun kira, da sauransu). Wataƙila dole ne ka kashe waɗannan fasalulluka kafin ka iya yin kiran gaggawa. Har ila yau, wasu cibiyoyin sadarwa suna buƙatar sa katin SIM mai aiki da kyau a cikin tashar salula ko ta hannu.

OEM/Integrators Installation Manual

Muhimmiyar Sanarwa ga masu haɗa OEM:

1. Wannan tsarin yana iyakance ga shigarwar OEM KAWAI.
2. Wannan tsarin yana iyakance ga shigarwa a cikin wayar hannu ko ƙayyadaddun aikace-aikace, bisa ga Sashe na 2.1091(b).
3. Ana buƙatar yarda daban don duk sauran saitunan aiki, gami da daidaitawa mai ɗaukar hoto dangane da Sashe na 2.1093 da saitunan eriya daban-daban.
4. Don Sashe na FCC 15.31 (h) da (k): Mai ƙirƙira mai watsa shiri yana da alhakin ƙarin gwaji don tabbatar da yarda azaman tsarin haɗin gwiwa. Lokacin gwada na'urar mai watsa shiri don dacewa da Sashe na 15 Ƙarshen B, ana buƙatar masana'anta don nuna yarda da Sashe na 15 Ƙarshen B yayin da ake shigar da module(s) masu watsawa da aiki. Ya kamata a watsa samfuran kuma kimantawa yakamata ta tabbatar da cewa fitar da gangan na module ɗin ya dace (watau asali da kuma fitar da hayaƙi). Dole ne mai yin masauki ya tabbatar da cewa babu ƙarin hayaƙin da ba da niyya ba sai abin da aka ba da izini a cikin Sashe na 15 Ƙaƙƙarfan Sashe na B ko abubuwan da aka fitar sun dace da ka'idar (s) masu watsawa. Mai bayarwa zai ba da jagora ga mai ƙira don buƙatun Sashe na 15 B idan an buƙata.

Muhimmiyar Bayani

lura cewa duk wani sabani (s) daga ma'anar ma'anar alamar eriya, kamar yadda aka bayyana ta hanyar umarnin, yana buƙatar masana'anta samfurin rundunar dole ne su sanar da Simcom cewa suna son canza ƙirar eriya. A wannan yanayin, ana buƙatar aikace-aikacen canji na Class II don zama filed ta USI, ko masana'anta na iya ɗaukar nauyi ta hanyar canji a cikin FCC ID (sabon aikace-aikacen) tsarin da aikace-aikacen canji na Class II ke bi.

Ƙarshen Lakabin Samfura

Lokacin da aka shigar da tsarin a cikin na'urar mai watsa shiri, alamar FCC ID dole ne a ganuwa ta taga akan na'urar ta ƙarshe ko kuma ta kasance a bayyane lokacin da aka cire ɓangaren shiga, kofa, ko murfin cikin sauƙi. Idan ba haka ba, dole ne a sanya lakabi na biyu a wajen na'urar ta ƙarshe wacce ta ƙunshi rubutu mai zuwa: "Ya ƙunshi ID na FCC: 2AJYU-8EC0001" "Ana iya amfani da ID na FCC kawai lokacin da duk bukatun FCC suka cika.

Eriya

1. Dole ne a shigar da eriya kamar yadda aka kiyaye 20 cm tsakanin eriya da masu amfani,
2. Ƙila ba za a haɗa tsarin mai watsawa tare da kowane mai watsawa ko eriya ba.

A yayin da waɗannan sharuɗɗan ba za a iya cika su ba (misaliampwasu saitunan kwamfutar tafi-da-gidanka ko wurin haɗin gwiwa tare da wani mai watsawa), sannan ba a ɗaukar izinin FCC mai aiki kuma ba za a iya amfani da ID na FCC akan samfurin ƙarshe ba. A cikin waɗannan yanayi, mai haɗin OEM zai kasance alhakin sake kimanta samfurin ƙarshe (ciki har da mai watsawa) da samun izini na FCC daban.
Don bin ka'idodin FCC waɗanda ke iyakance duka iyakar ƙarfin fitarwa na RF da bayyanar ɗan adam zuwa radiation RF, matsakaicin riba na eriya (ciki har da asarar kebul) dole ne ya wuce.

Bayanin Manual zuwa Mai amfani na Ƙarshe

Mai haɗin OEM dole ne ya sani kar ya ba da bayanai ga mai amfani na ƙarshe game da yadda ake girka ko cire wannan RF ɗin a cikin littafin mai amfani na ƙarshen samfurin wanda ya haɗa wannan ƙirar. Littafin mai amfani na ƙarshe zai haɗa da duk bayanan tsari da ake buƙata / faɗakarwa kamar yadda aka nuna a cikin wannan jagorar.

Sanarwa Hukumar Sadarwa ta Tarayya

Wannan na'urar ta bi Sashe na 15 na Dokokin FCC. Aikin yana ƙarƙashin sharuɗɗa biyu masu zuwa:

(1) Wannan na'urar bazai haifar da tsangwama mai cutarwa ba, kuma (2) dole ne wannan na'urar ta karɓi duk wani tsangwama da aka samu, gami da tsangwama wanda zai iya haifar da aiki maras so.

An gwada wannan kayan aikin kuma an same shi don biyan iyaka don na'urar dijital ta Class B, bisa ga Sashe na 15 na Dokokin FCC. An tsara waɗannan iyakokin don ba da kariya mai ma'ana daga tsangwama mai cutarwa a cikin shigarwar mazauni. Wannan kayan aiki yana haifarwa, amfani, kuma yana iya haskaka ƙarfin mitar rediyo kuma, idan ba'a shigar dashi ba kuma akayi amfani dashi daidai da umarnin, yana iya haifar da tsangwama mai cutarwa ga sadarwar rediyo. Duk da haka, babu tabbacin cewa tsangwama ba zai faru a cikin wani musamman ba
shigarwa. Idan wannan kayan aiki ya haifar da tsangwama mai cutarwa ga rediyo ko liyafar talabijin, wanda za'a iya tantance shi ta hanyar kashe kayan aiki da kunnawa, ana ƙarfafa mai amfani da yayi ƙoƙarin gyara kutse ta ɗayan matakan masu zuwa:
– Sake daidaitawa ko ƙaura eriya mai karɓa.
- Ƙara rabuwa tsakanin kayan aiki da mai karɓa
– Haɗa kayan aiki zuwa maɓalli a kan wata kewayawa daban da wacce aka haɗa mai karɓa zuwa gare ta.
- Tuntuɓi dila ko gogaggen masanin rediyo/TV don taimako.

Duk wani canje-canje ko gyare-gyaren da ƙungiyar da ke da alhakin bin doka ba ta amince da su ba na iya ɓata ikon mai amfani na sarrafa wannan kayan aikin. Wannan mai watsawa dole ne a kasance tare ko aiki tare tare da kowane eriya ko mai watsawa.

Jerin dokokin FCC masu aiki

An gwada wannan tsarin kuma an same shi da aiki da sashi na 22, sashi na 24, sashi na 27, sashi na 90 bukatun don Amincewa da Modular.
Mai watsawa na yau da kullun FCC ce kawai ke da izini don takamaiman sassa na ƙa'ida (watau, dokokin watsawa na FCC) da aka jera akan tallafin, kuma mai kera samfur ɗin yana da alhakin bin duk wani
Dokokin FCC da suka shafi mai masaukin baki ba su rufe su da kyautar ba da takaddun shaida. Idan wanda aka ba da kyauta ya tallata samfuran su azaman Sashe na 15 Ƙarshen B (lokacin da kuma ya ƙunshi keɓaɓɓiyar kewayawa ta dijital), to mai ba da kyautar zai ba da sanarwar da ke nuna cewa samfurin ƙarshe na ƙarshe yana buƙatar gwajin yarda da Sashe na 15 Subpart B tare da shigar da na'urar watsawa ta zamani. .

Anyi nufin wannan na'urar don masu haɗin OEM kawai a ƙarƙashin sharuɗɗan masu zuwa: (Don amfanin na'urar)

1. Dole ne a shigar da eriya kamar yadda aka kiyaye 20 cm tsakanin eriya da masu amfani, da
2. Ƙila ba za a haɗa tsarin mai watsawa tare da kowane mai watsawa ko eriya ba.

Muddin sharuɗɗa 2 na sama sun cika, ba za a buƙaci ƙarin gwaje-gwajen watsawa ba. Koyaya, mai haɗin OEM har yanzu yana da alhakin gwada samfuran ƙarshen su don kowane ƙarin buƙatun yarda da ake buƙata tare da shigar da wannan ƙirar.

Bayanin Bayyanar Radiation

Wannan kayan aikin ya dace da iyakokin fiddawa na FCC da aka tsara don yanayin da ba a sarrafa shi ba.
Yakamata a shigar da wannan kayan aiki tare da mafi ƙarancin tazarar 20 cm tsakanin radiator & jikin ku.